- استانداردهای بین المللی
نویسنده: مجله بیبیس
توییتر فیسبوک تلگرام واتساپ
- عنوان: ISO (International Organization for Standardization) Standards
- نویسنده: ISO (International Organization for Standardization)
- حوزه: استانداردهایبین المللی
- سال انتشار: 2024
- تعداد حوزه استاندارد: 80
- زبان اصلی: انگلیسی
- نوع فایل: pdf
- حجم تمام فایل: 146 مگابایت
سازمان بین المللی استاندارد (ISO) یک سازمان بین المللی غیردولتی متشکل از نهادهای استاندارد ملی است که طیف گسترده ای از استانداردهای اختصاصی، صنعتی و تجاری را توسعه و منتشر می کند. سازمان بین المللی استاندارد (ISO) در سال 1947 تاسیس شد و مقر آن در ژنو، سوئیس است. ایزو علاوه بر تولید استانداردها، گزارش های فنی، مشخصات فنی، مشخصات در دسترس عموم، اصلاحات فنی و راهنماها را نیز منتشر می کند. ISO با ارائه استانداردهای مشترک بین کشورهای مختلف نقش مهمی در تسهیل تجارت جهانی ایفا می کند. استانداردهای ISO همه زمینه ها را پوشش می دهد، از مراقبت های بهداشتی گرفته تا فناوری، تولید، امنیت و محیط زیست. سازمان ISO مسئول حسابرسی و انطباق فرآیندهای کاری کسب وکارها با الزامات استاندارد ایزو تدوین شده و صدور گواهینامه ایزو نیست. بلکه سازمان ایزو مسئولیت تدوین و یکپارچه سازی استاندارد در سطح جهانی را بر عهده دارد. سازمان ایزو از طریق سایت خود، انجمن بین المللی IAF را جهت تایید صلاحیت نهادهای اعتبار دهنده و نهادهای صادرکننده ایزو معرفی کرده است. در ادامه لیستی از استانداردهای منتشر شده و سایر محصولات تحویلی سازمان بین المللی استاندارد (ISO) ارایه شده است است. برای لیست کامل و به روز تمامی استانداردهای ISO، به وب سایت موسسه ISO مراجعه کنید.
استانداردهای ISO مبتنی بر شماره استاندارد در دستههای ذیل ارایه شدهاند، با انتخاب هر دسته، عناوین استانداردهای موجود در هر دسته قابل مشاهده است.
- ISO 1 – ISO 1999
- ISO 2000 – ISO 2999
- ISO 3000 – ISO 4999
- ISO 5000 – ISO 7999
- ISO 8000 – ISO 9999
- ISO 10000 – ISO 11999
- ISO 12000 – ISO 13999
- ISO 14000 – ISO 15999
- ISO 16000 – ISO 17999
- ISO 18000 – ISO 19999
- ISO 20000 – ISO 21999
- ISO 22000 – ISO 23999
- ISO 24000 – ISO 25999
- ISO 26000 – ISO 27999
- ISO 28000 – ISO 29999
- ISO 30000 – ISO 99999
جهت دانلود رایگان استاندادرهای جمعآوری شده به لینک ذیل رجوع نمایید.
Download: ISO (International Organization for Standardization) Standards
- ISO 1:2016 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
- ISO GUIDE 1:1972 Presentation of International Standards and technical reports [Withdrawn without replacement]
- IWA 1:2005 Quality management systems — Guidelines for process improvements in health service organizations [Withdrawn without replacement]
- ISO 2:1973 Textiles — Designation of the direction of twist in yarns and related products
- ISO/IEC GUIDE 2:2004 Standardization and related activities — General vocabulary
- IWA 2:2007 Quality management systems — Guidelines for the application of ISO 9001:2000 in education [Withdrawn without replacement]
- ISO 3:1973 Preferred numbers — Series of preferred numbers
- IWA 3:2005 Image safety — Reducing the incidence of undesirable biomedical effects caused by visual image sequences [Withdrawn without replacement]
- ISO/IEC GUIDE 3:1981 Identification of national standards that are equivalent to International Standards [Withdrawn: replaced with ISO/IEC GUIDE 21:1999, now ISO/IEC GUIDE 21-1:2005 and ISO/IEC GUIDE 21-2:2005]
- ISO 4:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications
- ISO GUIDE 4:1975 Preparation of standard methods of measuring performance of consumer goods (SMMP) [Withdrawn: replaced with ISO/IEC GUIDE 36:1982, now Withdrawn without replacement]
- IWA 4:2009 Quality management systems — Guidelines for the application of ISO 9001:2008 in local government [Withdrawn: replaced with ISO 18091:2014, now ISO 18091:2019]
- ISO 5 Photography and graphic technology — Density measurements
- ISO 5-1:2009 Part 1: Geometry and functional notation
- ISO 5-2:2009 Part 2: Geometric conditions for transmittance density
- ISO 5-3:2009 Part 3: Spectral conditions
- ISO 5-4:2009 Part 4: Geometric conditions for reflection density
- IWA 5:2006 Emergency preparedness [Withdrawn without replacement]
- ISO GUIDE 5:1976 Designation of internationally standardized items [Withdrawn without replacement]
- ISO 6:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
- IWA 6:2008 Guidelines for the management of drinking water utilities under crisis conditions [Withdrawn without replacement]
- ISO GUIDE 6:1977 Mention of reference materials in International Standards [Withdrawn without replacement]
- ISO 7:Pipe threads where pressure-tight joints are made on the threads
- ISO 7-1:1994 Part 1: Dimensions, tolerances and designation
- ISO 7-1:1994/COR 1:2007 Technical Corrigendum 1
- ISO 7-2:2000 Part 2: Verification by means of limit gauges
- ISO/IEC GUIDE 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment [Withdrawn: replaced with ISO/IEC 17007:2009]
- ISO 8:2019 Information and documentation — Presentation and identification of periodicals. For the 8-bit coded character set, see ISO/IEC 8859
- ISO GUIDE 8:1977 Guidelines for a national standards information centre [Withdrawn without replacement]
- IWA 8:2009 Tableware, giftware, jewellery, luminaries — Glass clarity — Classification and test method [Withdrawn without replacement]
- ISO 9:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages
- ISO GUIDE 9:1976 Courses in standardization [Withdrawn without replacement]
- IWA 9:2011 Framework for managing sustainable development in business districts [Withdrawn without replacement]
- ISO/R 10:1955 Aircraft — Ground air-conditioning connections for pressure cabins [Withdrawn: replaced with ISO 1034]
- ISO GUIDE 10:1977 Registration of standardizing bodies [Withdrawn without replacement]
- ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins
- ISO 12:1987 Aerospace — Pipelines — Identification
- ISO 13:1978 Grey iron pipes, special castings and grey iron parts for pressure main lines [Withdrawn without replacement]
- ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
- ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan
- ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
- ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
- ISO 18:1981 Documentation — Contents list of periodicals
- ISO/R 19:1956 Shipbuilding — Inland navigation — Deckbolts [Withdrawn without replacement]
- ISO/R 20:1956 Shipbuilding — Inland navigation — Rivets for Hatches [Withdrawn without replacement]
- ISO 21:1985 Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains [Withdrawn without replacement]
- ISO 22:1991 Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances
- ISO 23:1993 Cinematography — Camera usage of 35 mm motion-picture film — Specifications
- ISO/R 24:1956 Cinematography — Projector usage of 35 mm motion-picture films for direct front projection — Specifications [Withdrawn: replaced with ISO 2939]
- ISO 25:1994 Cinematography — Camera usage of 16 mm motion-picture film — Specifications
- ISO 26:1993 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications
- ISO/R 27:1956 Cinematography — Emulsion and sound record positions in camera for 16 mm motion-picture films [Withdrawn without replacement]
- ISO 28:1976 Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications
- ISO 29:1980 Cinematography — Projector usage of 8 mm Type R silent motion-picture film for direct front projection — Specifications [Withdrawn without replacement]
- ISO/R 30:1956 Bibliographical strip [Withdrawn without replacement]
- ISO 31:Quantities and units [Withdrawn: replaced with ISO/IEC 80000]
- ISO 32:1977 Gas cylinders for medical use — Marking for identification of content
- ISO/R 33:1957 Rubber, vulcanized or thermoplastic — Du Pont constant load method of measuring abrasion resistance of vulcanized natural and synthetic rubbers [Withdrawn without replacement]
- ISO 34 Rubber, vulcanized or thermoplastic — Determination of tear strength measuring abrasion resistance of vulcanized natural and synthetic rubbers
- ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
- ISO 34-2:2015 Part 2: Small (Delft) test pieces
- ISO 35:2004 Natural rubber latex concentrate — Determination of mechanical stability
- ISO 36:2020 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
- ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
- ISO/R 38:1957 Shipbuilding — Bollards [Withdrawn without replacement]
- ISO/R 39:1957 Shipbuilding — Anchor Chains — Lugless Joining Shackles [Withdrawn: replaced with ISO 1704]
- ISO/R 40:1957 Shipbuilding — Anchor Chains — Studless Links [Withdrawn: replaced with ISO 1704]
- ISO 41:1980 Shipbuilding — Inland vessels — Covers for deck openings for pumps [Withdrawn without replacement]
- ISO/R 42:1957 Shipbuilding — Inland vessels — Mushroom-type ventilator heads [Withdrawn: replaced by ISO 3372, now withdrawn without replacement]
- ISO 43:2016 Aircraft — Jacking pads
- ISO 44:1975 Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation [Withdrawn without replacement]
- ISO 45:1990 Aircraft — Pressure refuelling connections
- ISO 46:1973 Aircraft — Fuel nozzle grounding plugs and sockets
- ISO/R 47:1957 Aircraft — Toilet connections [Withdrawn: replaced with ISO 17775]
- ISO 48 Rubber, vulcanized or thermoplastic — Determination of hardness
- ISO 48-1:2018 Part 1: Introduction and guidance
- ISO 48-2:2018 Part 2: Hardness between 10 IRHD and 100 IRHD
- ISO 48-3:2018 Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
- ISO 48-4:2018 Part 4: Indentation hardness by durometer method (Shore hardness)
- ISO 48-5:2018 Part 5: Indentation hardness by IRHD pocket meter method
- ISO 48-6:2018 Part 6: Apparent hardness of rubber-covered rollers by IRHD method
- ISO 48-7:2018 Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
- ISO 48-8:2018 Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
- ISO 48-9:2018 Part 9: Calibration and verification of hardness testers
- ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
- ISO 50:1977 Metal pipes — Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
- ISO/R 51:1957 Shipbuilding — Inland navigation — Pipe lines for the transport of combustible liquids — nominal diameters [Withdrawn without replacement]
- ISO/R 52:1957 Belt drives — Grooved pulleys — Sections A, B, C, D, and E [Withdrawn: replaced by ISO 4183]
- ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile
- ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules
- ISO 55:1977 Seedlac — Specification [Withdrawn without replacement]
- ISO 56:1979 Shellac — Specification [Withdrawn without replacement]
- ISO 56-1:1979 Hand-made Shellac — Specification [Withdrawn without replacement]
- ISO 56-2:1979 Machine-made Shellac — Specification [Withdrawn without replacement]
- ISO 57:1975 Bleached lac — Specification [Withdrawn without replacement]
- ISO/R 58:1958 Substances of paper [Withdrawn without replacement]
- ISO 59:1976 Plastics — Determination of acetone-soluble matter [Withdrawn without replacement]
- ISO 60:1977 Plastics — Determination of apparent density of material that can be poured from a specified funnel
- ISO 61:1976 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
- ISO 62:2008 Plastics — Determination of water absorption
- ISO 63:1975 Flat transmission belts — Lengths [Withdrawn: Replaced with ISO 22]
- ISO 64:1974 Steel tubes — Outside Diameters [Withdrawn: Replaced with ISO 4200]
- ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1 [Withdrawn without replacement]
- ISO/R 66:1958 Paper vocabulary — First series of terms [Withdrawn: Replaced with ISO 4046]
- ISO 67:1981 Muscovite mica blocks, thins and films — Grading by size [Withdrawn without replacement]
- ISO 68 ISO general-purpose screw threads – Basic profile
- ISO 68-1:1998 Part 1: Metric screw threads
- ISO 68-2:1998 Part 2: Inch screw threads
- ISO 69:1998 Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions
- ISO 70:1981 Cinematography — 35 mm negative photographic sound record on 35 mm motion-picture film — Position and maximum width dimensions
- ISO 71:2014 Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
- ISO/R 72:1958 Cinematography — Sound records and scanning area of 35 mm double width push-pull sound prints — Normal and offset centerline types [Withdrawn without replacement]
- ISO/R 73:1958 Cinematography — Image area produced by camera aperture and maximum projectable image area on 35 mm motion-picture film — Positions and dimensions [Withdrawn: replaced by ISO 2906 and ISO 2907]
- ISO 74:1976 Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film — Positions and dimensions
- ISO 75 Plastics — Determination of temperature of deflection under load
- ISO 75-1:2020 Part 1: General test method
- ISO 75-2:2013 Part 2: Plastics and ebonite
- ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
- ISO 76:2006 Rolling bearings — Static load ratings
- ISO/R 77:1958 Bibliographical references — Essential elements [Withdrawn without replacement]
- ISO 78 Chemistry — Layouts for standards[Note 3]
- ISO 78-2:1999 Part 2: Methods of chemical analysis
- ISO 78-3:1983 Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement]
- ISO 78-4:1983 Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement]
- ISO/R 79:1968 Steel — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO/TR 79:2015 Reference materials – Examples of reference materials for qualitative properties
- ISO/R 80:1968 Steel — Rockwell hardness test (B and C scales) [Withdrawn: replaced with ISO 6508]
- ISO/R 81:1967 Steel — Vickers hardness test (Load 5 to 100 kgf) [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO 82:1974 Steel — Tensile testing [Withdrawn: replaced with ISO 6892-1]
- ISO 83:1976 Steel — Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
- ISO/R 84:1959 Steel — Izod impact test [Withdrawn without replacement]
- ISO/R 85:1959 Steel — Bend test [Withdrawn: replaced with ISO 7438]
- ISO 86:1974 Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
- ISO/R 87:1959 Steel — Simple bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7438]
- ISO/R 88:1959 Steel — Reverse bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7799]
- ISO 89:1974 Steel — Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
- ISO 90 Light gauge metal containers — Definitions and determination of dimensions and capacities
- ISO 90-1:1997 Part 1: Open-top cans
- ISO 90-2:1997 Part 2: General use containers
- ISO 90-3:2000 Part 3: Aerosol cans
- ISO 91:2017 Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
- ISO 92:1976 Textile machinery and accessories — Spinning machinery — Definition of side (left or right)
- ISO 93 Textile machinery and accessories — Cylindrical sliver cans
- ISO 93-1:2006 Part 1: Main dimensions
- ISO 93-2:2006 Part 2: Spring bottoms
- ISO 93-3:1981 Part 3: Packaging sliver cans (press cans) [Withdrawn without replacement]
- ISO 94:1982 Textile machinery and accessories — Spindle gauges for ring-spinning and ring-doubling frames
- ISO/R 95:1972 Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for “C” travellers [Withdrawn without replacement]
- ISO 96 Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames
- ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
- ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
- ISO 97:1975 Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers [Withdrawn: replaced with ISO 96-2]
- ISO 98:2001 Textile machinery and accessories — Spinning preparatory and spinning machinery — Main dimensions of coverings for top rollers
- ISO 99:1975 Pulleys for flat transmission belts — Diameters [Withdrawn: replaced with ISO 22]
- ISO 100:1984 Pulleys for flat transmission belts — Crowns [Withdrawn: replaced with ISO 22]
- ISO/R 101:1959 Width of sheets of paper [Withdrawn without replacement]
- ISO 102:1990 Aircraft — Gravity filling orifices
- ISO/R 103:1959 Aircraft — Instrument Cases — Sizes and mounting dimensions [Withdrawn without replacement]
- ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan
- ISO 105 Textiles — Tests for colour fastness
- ISO 105-A01:2010 Part A01: General principles of testing
- ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
- ISO 105-A03:2019 Part A03: Grey scale for assessing staining
- ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
- ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
- ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
- ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
- ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
- ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
- ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
- ISO 105-B03:2017 Part B03: Colour fastness to weathering: Outdoor exposure
- ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
- ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
- ISO 105-B06:2020 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
- ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
- ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
- ISO 105-B10:2011 Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
- ISO 105-C01:1989 Part C01: Colour fastness to washing: Test 1 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C02:1989 Part C02: Colour fastness to washing: Test 2 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C03:1989 Part C03: Colour fastness to washing: Test 3 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C04:1989 Part C04: Colour fastness to washing: Test 4 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C05:1989 Part C05: Colour fastness to washing: Test 5 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
- ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
- ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
- ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
- ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
- ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
- ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
- ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
- ISO 105-E01:2013 Part E01: Colour fastness to water
- ISO 105-E02:2013 Part E02: Colour fastness to sea water
- ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
- ISO 105-E04:2013 Part E04: Colour fastness to perspiration
- ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
- ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
- ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
- ISO 105-E08:1994 Part E08: Colour fastness to hot water
- ISO 105-E09:2010 Part E09: Colour fastness to potting
- ISO 105-E10:1994 Part E10: Colour fastness to decatizing
- ISO 105-E11:1994 Part E11: Colour fastness to steaming
- ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
- ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
- ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
- ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
- ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
- ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
- ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
- ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
- ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
- ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
- ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
- ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
- ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
- ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
- ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
- ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
- ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
- ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
- ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
- ISO 105-J03:2009 Part J03: Calculation of colour differences
- ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
- ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
- ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
- ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
- ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
- ISO 105-N05:1993 Part N05: Colour fastness to stoving
- ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
- ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
- ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
- ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
- ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
- ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
- ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
- ISO 105-X03:1987 Part X03: Colour fastness to chlorination [Withdrawn without replacement]
- ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
- ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
- ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
- ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
- ISO 105-X08:1994 Part X08: Colour fastness to degumming
- ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
- ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
- ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
- ISO 105-X12:2016 Part X12: Colour fastness to rubbing
- ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
- ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
- ISO 105-X16:2016 Part X16: Colour fastness to rubbing — Small areas
- ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
- ISO 105-X19:2020 Part X19: Colour fastness to rubbing (Gakushin test method)
- ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
- ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
- ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
- ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
- ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
- ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
- ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
- ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
- ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
- ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
- ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
- ISO/R 106:1959 Shipbuilding — Light metal rivets — Diameters and clearances [Withdrawn without replacement]
- ISO/R 107:1959 Shipbuilding — Light metal rivets — Ship heads [Withdrawn without replacement]
- ISO 108:1976 Textile machinery and accessories — Weaving looms — Definition of left and right sides
- ISO 109:1982 Textile machinery — Working widths of weaving machines
- ISO 110:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 9 degrees 15′ [Withdrawn without replacement]
- ISO 111:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20′ [Withdrawn: Replaced with ISO 8489-3]
- ISO 112:1983 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30′ [Withdrawn: Replaced with ISO 8489-2]
- ISO 113:2010 Rolling bearings — Plummer block housings — Boundary dimensions
- ISO 114:1980 Unalloyed magnesium ingots — Chemical composition [Withdrawn: replaced with ISO 8287]
- ISO 115:2003 Unalloyed aluminium ingots for remelting — Classification and composition
- ISO/R 116:1959 Pesticides — Common names — First series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 117:1959 Plastics — Polystyrene — Determination of boiling water absorption [Withdrawn: replaced with ISO 62]
- ISO 118:1976 Plastics — Polystyrene — Determination of methanol-soluble matter [Withdrawn without replacement]
- ISO 119:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method
- ISO 120:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
- ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced with ISO 16220]
- ISO/R 122:1959 Composition of magnesium-aluminium-zinc alloy ingots for casting purposes [Withdrawn: replaced with ISO 121, and later ISO 16220]
- ISO 123:2001 Rubber latex — Sampling
- ISO 124:2014 Latex, rubber — Determination of total solids content
- ISO 125:2020 Natural rubber latex concentrate — Determination of alkalinity
- ISO 126:2005 Natural rubber latex concentrate — Determination of dry rubber content
- ISO 127:2018 Rubber, natural latex concentrate — Determination of KOH number
- ISO 128 Technical product documentation — General principles of representation[Note 3]
- ISO 129 Technical product documentation — Indication of dimensions and tolerances[Note 3]
- ISO 129-1:2018 Part 1: General principles
- ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings
- ISO 129-5:2018 Part 5: Dimensioning of structural metal work
- ISO/R 130:1959 Aircraft — Colour identification of mechanical control circuits [Withdrawn without replacement]
- ISO 131:1979 Acoustics — Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
- ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
- ISO 133:1983 Rubber, vulcanized — Determination of crack growth (De Mattia) [Withdrawn: replaced with ISO 132]
- ISO 134:1973 Plain end steel tubes for general purposes [Withdrawn: replaced with ISO 4200]
- ISO/R 135:1959 Paper vocabulary — Second series of terms [Withdrawn: replaced with ISO 4046]
- ISO 136:1972 Steel — Simple torsion testing of wire [Withdrawn: replaced with ISO 7800]
- ISO 137:2015 Wool — Determination of fibre diameter — Projection microscope method
- ISO/R 138:1960 Textiles — Universal yarn count system [Withdrawn: replaced with ISO 1144]
- ISO 139:2005 Textiles — Standard atmospheres for conditioning and testing
- ISO 140 Acoustics — Measurement of sound insulation in buildings and of building elements
- ISO 140-1:1997 Part 1: Requirements for laboratory test facilities with suppressed flanking transmission [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced with ISO 12999-1:2014]
- ISO 140-3:1995 Part 3: Laboratory measurements of airborne sound insulation of building elements [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced with ISO 16283-1:2014]
- ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced with ISO 16283-(1,3):2014]
- ISO 140-6:1998 Part 6: Laboratory measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 16283-(1–2)]
- ISO 140-8:1997 Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-9:1985 Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it [Withdrawn: replaced with ISO 10848-2]
- ISO 140-10:1991 Part 10: Laboratory measurement of airborne sound insulation of small building elements [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-11:1991 Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-12:2000 Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor [Withdrawn: replaced with ISO 10848-2]
- ISO/TR 140-13:1997 Part 13: Guidelines [Withdrawn: replaced with ISO 140-14]
- ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced with ISO 16283-1:2014]
- ISO 140-16:2006 Part 16: Laboratory measurement of the sound reduction index improvement by additional lining [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced with ISO 10140-(1,5):2016]
- ISO 141:1976 Textile machinery and accessories — Pirn winders and cross winders — Definition of left and right sides
- ISO 142:1976 Textile machinery and accessories — Weaving preparatory machines — Definition of left and right sides
- ISO 143:1977 Textile machinery and accessories — Weft pirns for automatic looms [Withdrawn without replacement]
- ISO 144:1973 Steel — Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
- ISO/R 145:1960 Steel — Wrapping test for wire [Withdrawn: replaced with ISO 7802]
- ISO 146:1984 Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-2]
- ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-2]
- ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel [Withdrawn: replaced with ISO 7500-1]
- ISO 148 Metallic materials — Charpy pendulum impact test
- ISO 148-1:2016 Part 1: Test method
- ISO 148-2:2016 Part 2: Verification of testing machines
- ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
- ISO/R 149:1960 Modified Erichsen cupping test for steel sheet and strip [Withdrawn: replaced with ISO 8490]
- ISO 150:2018 Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test
- ISO 151:1974 Shipbuilding details — Marking of hatchway beams [Withdrawn without replacement]
- ISO/R 152:1960 Shipbuilding details — Marking of wooden hatchway covers [Withdrawn without replacement]
- ISO/R 153:1960 Shipbuilding details — Ordinary Glasses for scuttles and lights — Dimensions [Withdrawn without replacement]
- ISO/R 154: Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys [Withdrawn without replacement]
- ISO 155:2019 Belt drives — Pulleys — Limiting values for adjustment of centres
- ISO 156:1982 Metallic materials — Hardness test — Verification of Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-2]
- ISO 157:1996 Coal — Determination of forms of sulfur
- ISO/R 158:1960 Coal — Determination of ash [Withdrawn: replaced with ISO 1171]
- ISO/R 159:1960 Coal — Determination of total sulfur by the Strambi method [Withdrawn without replacement]
- ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
- ISO 161 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures
- ISO 161-1:2018 Part 1: Metric series
- ISO 161-2:1996 Part 2: Inch-based series
- ISO 162:1985 Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions
- ISO/R 163:1960 Cinematography — Magnetic striping of 16 mm film perforated along both edges [Withdrawn without replacement]
- ISO/R 164:1960 Aluminium and aluminium alloys — Castings — Chemical composition [Withdrawn: replaced with ISO 3522]
- ISO/R 165:1960 Metallic materials — Steel tubes — Flanging test [Withdrawn: replaced with ISO 8494]
- ISO/R 166:1960 Metallic materials — Steel tubes — Drift expanding test [Withdrawn: replaced with ISO 8493]
- ISO/R 167:1960 Metallic materials — Steel tubes — Bend test [Withdrawn: replaced with ISO 8491]
- ISO/R 168:1960 Stretchers [Withdrawn without replacement]
- ISO/R 169:1960 Sizes of photocopies (on paper) readable without optical devices [Withdrawn without replacement]
- ISO/R 170:1960 Shipbuilding — Anchor Chains — Stud links [Withdrawn: replaced with ISO 1704]
- ISO 171:1980 Plastics — Determination of bulk factor of moulding materials
- ISO 172:1978 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
- ISO/R 173:1961 Plastics — Determination of the percentage of styrene in polystyrene with Wijs solution [Withdrawn without replacement]
- ISO 174:1974 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution [Withdrawn: replaced with ISO 1628-2]
- ISO 175:2010 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
- ISO 176:2005 Plastics — Determination of loss of plasticizers — Activated carbon method
- ISO 177:2016 Plastics — Determination of migration of plasticizers
- ISO 178:2019 Plastics — Determination of flexural properties
- ISO 179 Plastics — Determination of Charpy impact properties
- ISO 179-1:2010 Part 1: Non-instrumented impact test
- ISO 179-2:2020 Part 2: Instrumented impact test
- ISO 180:2019 Plastics — Determination of Izod impact strength
- ISO 181:1981 Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod [Withdrawn without replacement]
- ISO 182 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
- ISO 182-1:1990 Part 1: Congo red method
- ISO 182-2:1990 Part 2: pH method
- ISO 182-3:1993 Part 3: Conductometric method
- ISO 182-4:1993 Part 4: Potentiometric method
- ISO 183:1976 Plastics — Qualitative evaluation of the bleeding of colorants [Withdrawn without replacement]
- ISO/R 184:1961 Grey cast irons — Brinell hardness test [Withdrawn without replacement]
- ISO 185:2020 Grey cast irons — Classification
- ISO 186:2002 Paper and board — Sampling to determine average quality
- ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
- ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
- ISO/R 189:1961 Principles of operation of standards marks [Withdrawn without replacement]
- ISO/R 190:1961 Tensile testing of light metals and their alloys [Withdrawn: replaced with ISO 6892-1]
- ISO/R 191:1971 Brinell hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO/R 192:1971 Wickers hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO/R 193:1961 Microcopies on transparent bases: sizes of recommended bases [Withdrawn without replacement]
- ISO 194:1981 Plastics — List of equivalent terms [Withdrawn: replaced with ISO 472]
- ISO/R 195:1961 Copper and copper alloys — Drift expanding test [Withdrawn: replaced with ISO 8493]
- ISO 196:1978 Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test
- ISO 197 Copper and copper alloys — Terms and definitions
- ISO 197-1:1983 Part 1: Materials
- ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)
- ISO 197-3:1983 Part 3: Wrought products
- ISO 197-4:1983 Part 4: Castings
- ISO 197-5:1980 Part 5: Methods of processing and treatment
- ISO/R 198:1961 Double-deck flat pallets for through transit of goods [Withdrawn without replacement]
- ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
- ISO 200 – ISO 499
- ISO/R 200:1961 Rolling bearings — Tolerances — Definitions [Withdrawn: replaced with ISO 1132]
- ISO/R 201:1961 Rolling bearings — Radial internal clearance in unloaded radial groove type ball bearings with cylindrical bore [Withdrawn: replaced with ISO 5753]
- ISO/R 202:1961 Metallic materials — Steel tubes — Flattening Test [Withdrawn: replaced with ISO 8492]
- ISO/R 203:1961 Metallic materials — Interrupted uniaxial creep testing in tension — Method of test [Withdrawn without replacement]
- ISO 204:2018 Metallic materials — Uniaxial creep testing in tension — Method of test
- ISO/R 205:1961 Steel — Determination of proof stress and proving test at elevated temperature [Withdrawn: replaced with ISO 783, and later ISO 6892-2]
- ISO/R 206:1961 Steel — Creep stress rupture testing of at elevated temperatures [Withdrawn: replaced with ISO 204]
- ISO 207:1980 Magnesium and magnesium alloys — Unalloyed magnesium — Chemical composition [Withdrawn: replaced with ISO 8287]
- ISO/R 208:1961 Aluminium and aluminium alloys — Castings — Chemical composition (complement to ISO/R 164) [Withdrawn: replaced with ISO 3522]
- ISO 209:2007 Aluminium and aluminium alloys — Chemical composition
- ISO/TS 210:2014 Essential oils — General rules for packaging, conditioning and storage
- ISO/TS 211:2014 Essential oils — General rules for labelling and marking of containers
- ISO 212:2007 Essential oils — Sampling
- ISO 213:1982 Machine tools — Lathe tool posts — Overall internal height [Withdrawn without replacement]
- ISO 214:1976 Documentation — Abstracts for publications and documentation
- ISO 215:1986 Documentation — Presentation of contributions to periodicals and other serials
- ISO 216:2007 Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction
- ISO 217:2013 Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction
- ISO/R 218:1961 Scale of 35 mm microfilms for international exchange [Withdrawn without replacement]
- ISO/R 219:1961 Pesticides — Common names — Second series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 220:1961 Textile fibres — Some methods of sampling for testing [Withdrawn: replaced with ISO 1130]
- ISO 221:1976 Metallic materials — Steel tubes — Wall thicknesses [Withdrawn without replacement]
- ISO/R 222:1968 Aerospace — Characteristics of aircraft electrical systems [Withdrawn: replaced with ISO 1540]
- ISO 223:1975 Aircraft — Ground support electrical supplies — General requirements [Withdrawn: replaced with ISO 6858]
- ISO/TR 224:1998 Aircraft — Declaration of design and performance for aircraft equipment — Standard form [Withdrawn without replacement]
- ISO 225:2010 Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
- ISO 226:2003 Acoustics — Normal equal-loudness-level contours
- ISO 227:1978 Textile machinery and accessories — Single box pickers for centre tip shuttles for automatic looms and related picking stick dimensions [Withdrawn without replacement]
- ISO 228 Pipe threads where pressure-tight joints are not made on the threads
- ISO 229:1973 Machine tools — Speeds and feeds
- ISO 230 Test code for machine tools
- ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
- ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
- ISO 230-3:2020 Part 3: Determination of thermal effects
- ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools
- ISO 230-5:2000 Part 5: Determination of the noise emission
- ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
- ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation
- ISO/TR 230-8:2010 Part 8: Vibrations
- ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
- ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
- ISO/TR 230-11:2018 Part 11: Measuring instruments suitable for machine tool geometry tests
- ISO/R 231:1961 Paper vocabulary — Third series of terms [Withdrawn: replaced with ISO 4046]
- ISO/R 232:1961 Straight-sides splines and gauges — Dimensions in inches [Withdrawn without replacement]
- ISO 233 Information and documentation — Transliteration of Arabic characters into Latin characters[Note 3]
- ISO 234 Files and rasps
- ISO 234-1:1983 Part 1: Dimensions
- ISO 234-2:1982 Part 2: Characteristics of cut
- ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
- ISO 236 Reamers[Note 3]
- ISO 236-1:1976 Hand reamers
- ISO 236-2:2013 Part 2: Long fluted machine reamers with Morse taper shanks
- ISO 237:1975 Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
- ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
- ISO 239:1999 Drill chuck tapers
- ISO 240:2016 Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
- ISO 241:1994 Shanks for turning and planing tools — Shapes and dimensions of the section
- ISO 242:2014 Carbide tips for brazing on turning tools
- ISO 243:2014 Turning tools with carbide tips — External tools
- ISO 244:1979 Aircraft — Sealing wire
- ISO 245:1998 Aerospace — Lockwire — Diameters
- ISO 246:2007 Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions
- ISO 247 Rubber — Determination of ash
- ISO 247-1:2018 Part 1: Combustion method
- ISO 247-2:2018 Part 2: Thermogravimetric analysis (TGA)
- ISO 248 Rubber, raw – Determination of volatile-matter content
- ISO 248-1:2011 Part 1: Hot-mill method and oven method
- ISO 248-2:2019 Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- ISO 249:2016 Rubber, raw natural — Determination of dirt content
- ISO/R 250:1962 Rubber, raw natural — Sampling and preparation [Withdrawn: replaced with ISO 1795 and ISO 1796 (which was later replaced by ISO 1795)]
- ISO 251:2012 Conveyor belts with textile carcass — Widths and lengths
- ISO 252:2007 Conveyor belts — Adhesion between constitutive elements — Test methods
- ISO/R 253:1962 Belt drives — Grooved pulleys — sections Y and Z [Withdrawn: replaced with ISO 4183]
- ISO 254:2011 Belt drives — Pulleys — Quality, finish and balance
- ISO 255:1990 Belt drives — Pulleys for V-belts (system based on datum width) — Geometrical inspection of grooves
- ISO/R 256:1962 Belt drives — Section checking for V-belts [Withdrawn without replacement]
- ISO 257:2018 Pesticides and other agrochemicals — Principles for the selection of common names
- ISO/R 258:1961 Pesticides — Common names — Third series of terms [Withdrawn: replaced with ISO 1750]
- ISO 259 Information and documentation — Transliteration of Hebrew characters into Latin characters[Note 3]
- ISO/R 260:1962 Terms related to microcopies and their bases [Withdrawn without replacement]
- ISO 261:1998 ISO general purpose metric screw threads — General plan
- ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
- ISO 263:1973 ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in’
- ISO 264:1976 Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series [Withdrawn: replaced with ISO 1452-3]
- ISO 265 Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series
- ISO 265-1:1988 Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
- ISO 266:1997 Acoustics — Preferred frequencies
- ISO/R 267:1962 Aircraft — Figures for instrument dials and number plates [Withdrawn without replacement]
- ISO 268:1980 Aircraft — Mechanical and electromechanical indicators — General requirements
- ISO 269:1985 Correspondence envelopes – Designation and sizes [Withdrawn without replacement]
- ISO 270:1975 Textile fibres — Determination of length by measuring individual fibres [Withdrawn: replaced with ISO 6989]
- ISO/R 271:1962 Textiles — Implementation of the Tex System for designating the size of fibres [Withdrawn: replaced with ISO 1144]
- ISO 272:1982 Fasteners — Hexagon products — Widths across flats
- ISO 273:1979 Fasteners — Clearance holes for bolts and screws
- ISO 274:1975 Copper tubes of circular section — Dimensions [Withdrawn without replacement]
- ISO/R 275:1962 Zinc Oxide for paints — Requirements and methods of test [Withdrawn without replacement]
- ISO 276:2019 Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test
- ISO 277:2002 Binders for paints and varnishes — Raw tung oil — Requirements and methods of test
- ISO/R 278:1962 Essential oils — Standard layout for methods of analysis of essential oils [Withdrawn without replacement]
- ISO 279:1998 Essential oils — Determination of relative density at 20 degrees C – Reference method
- ISO 280:1998 Essential oils — Determination of refractive index
- ISO 281:2007 Rolling bearings — Dynamic load ratings and rating life
- ISO 282:1992 Conveyor belts — Sampling
- ISO 283:2015 Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method
- ISO 284:2012 Conveyor belts – Electrical conductivity – Specification and test method
- ISO/R 285:1962 Metallic materials — Steel tubes — Butt welding bends
- ISO 286 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes
- ISO 286-1:2010 Part 1: Basis of tolerances, deviations and fits
- ISO 286-2:2010 Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- ISO 287:2017 Paper and board — Determination of moisture content of a lot — Oven-drying method
- ISO/R 288
- ISO/R 288-1:1963 Part 1: Slotted and castle nuts with metric thread [Withdrawn without replacement]
- ISO/R 288-2:1969 Part 2: Slotted and castle nuts with metric thread 42 up to and including 100 mm thread diameter [Withdrawn without replacement]
- ISO 289 Rubber, unvulcanized — Determinations using a shearing-disc viscometer
- ISO 289-1:2015 Part 1: Determination of Mooney viscosity
- ISO 289-2:2020 Part 2: Determination of pre-vulcanization characteristics
- ISO 289-3:2015 Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
- ISO 289-4:2003 Part 4: Determination of the Mooney stress-relaxation rate
- ISO/R 290:1961 Pesticides — Common names — Fourth series of terms [Withdrawn: replaced by ISO 1750]
- ISO 291:2008 Plastics — Standard atmospheres for conditioning and testing
- ISO/R 292:1967 Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics [Withdrawn: replaced by ISO 1133]
- ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
- ISO 294 Plastics — Injection moulding of test specimens of thermoplastic materials
- ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens
- ISO 294-2:2018 Part 2: Small tensile bars
- ISO 294-3:2020 Part 3: Small plates
- ISO 294-4:2018 Part 4: Determination of moulding shrinkage
- ISO 294-5:2017 Part 5: Preparation of standard specimens for investigating anisotropy
- ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
- ISO 296:1991 Machine tools — Self-holding tapers for tool shanks
- ISO 297:1988 7/24 tapers for tool shanks for manual changing
- ISO 298:1973 Machine tools — Lathe centres — Sizes for interchangeability
- ISO 299:1987 Machine tool tables — T-slots and corresponding bolts
- ISO/R 300 Rolling bearings — ISO identification code
- ISO/R 300-1:1963 Rolling bearings — ISO identification code for group I: Radial Ball and Rolling Bearings, group II: Thrust Ball and Rolling Bearings, and group III: Tapered Rolling Bearings, Metric Series [Withdrawn without replacement]
- ISO/R 300-2:1965 Rolling bearings — ISO identification code for group IV: Tapered Rolling Bearings, Inch Series [Withdrawn without replacement]
- ISO 301:2006 Zinc alloy ingots intended for castings
- ISO 302:2015 Pulps — Determination of Kappa number
- ISO 303:2002 Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers [Withdrawn without replacement]
- ISO 304:1985 Surface active agents — Determination of surface tension by drawing up liquid films
- ISO 305:2019 Plastics — Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds — Discoloration method
- ISO 306:2013 Plastics — Thermoplastic materials – Determination of Vicat softening temperature (VST)
- ISO 307:2019 Plastics — Polyamides — Determination of viscosity number
- ISO 308:1994 Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
- ISO/R 309 Manganese ores — Methods of sampling
- ISO/R 309-1:1963 Manganese ores — Methods of sampling — Part 1: Ore loaded in freight wagons [Withdrawn without replacement]
- ISO 310:1992 Manganese ores and concentrates — Determination of hygroscopic moisture content in analytical samples — Gravimetric method
- ISO/R 311:1963 Manganese ores and concentrates — Determination of silicon content [Withdrawn: replaced with ISO 5890]
- ISO 312:1986 Manganese ores — Determination of active oxygen content, expressed as manganese dioxide — Titrimetric method
- ISO/R 313:1963 Manganese ores and concentrates — Determination of total iron content [Withdrawn: replaced with ISO 7990]
- ISO 314:1981 Manganese ores — Determination of carbon dioxide content — Gravimetric method [Withdrawn without replacement]
- ISO 315:1984 Manganese ores and concentrates — Determination of nickel content — Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method
- ISO 316:1982 Manganese ores — Determination of cobalt content — Nitroso-R-salt photometric method [Withdrawn without replacement]
- ISO 317:1984 Manganese ores and concentrates — Determination of arsenic content — Spectrometric method
- ISO/R 318:1963 Manganese ores and concentrates — Determination of aluminium content [Withdrawn: replaced with ISO 4295]
- ISO/R 319:1963 Manganese ores and concentrates — Determination of manganese content [Withdrawn: replaced with ISO 4298]
- ISO 320:1981 Manganese ores — Determination of sulphur content — Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
- ISO/R 321:1963 Manganese ores and concentrates — Determination of phosphorus content [Withdrawn: replaced with ISO 4293]
- ISO/R 322:1978 Manganese ores and concentrates — Determination of copper content [Withdrawn: replaced with ISO 4294]
- ISO/R 323:1963 Manganese ores and concentrates — Determination of lead content [Withdrawn without replacement]
- ISO 324:1978 Textile machinery and accessories — Cones for cross winding for dyeing purposes — Half angle of the cone 4 degrees 20′ [Withdrawn: replaced with ISO 8489-4]
- ISO/R 325:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 4 degrees 20′ [Withdrawn without replacement]
- ISO/R 326:1963 Textile machinery and accessories — Wood cones for cross winding — Nominal half angle of the cone 5 degrees 57′ [Withdrawn without replacement]
- ISO/R 327:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 3 degrees 30′ [Withdrawn without replacement]
- ISO 328:1974 Picture postcards and lettercards — Size [Withdrawn without replacement]
- ISO/R 329:1963 Large pallets for through transit of goods [Withdrawn without replacement]
- ISO/R 330:1963 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Inch-based series [Withdrawn: replaced with ISO 161-2]
- ISO 331:1983 Coal — Determination of moisture in the analysis sample — Direct gravimetric method [Withdrawn without replacement]
- ISO 332:1981 Coal — Determination of nitrogen — Macro Kjeldahl method [Withdrawn without replacement]
- ISO 333:1996 Coal — Determination of nitrogen — Semi-micro Kjeldahl method [Withdrawn without replacement]
- ISO 334:2020 Coal and coke — Determination of total sulfur — Eschka method
- ISO 335:1974 Hard coal — Determination of caking power — Roga test [Withdrawn without replacement]
- ISO 336:1976 Plain end steel tubes, welded and seamless — General table of dimensions and masses per unit length [Withdrawn: replaced with ISO 4200]
- ISO 337:1981 Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions
- ISO/R 338:1963 Lifeboats for less than one hundred people [Withdrawn without replacement]
- ISO/R 339:1963 Definition of terms appearing in ISO recommendations for oils and pigments [Withdrawn without replacement]
- ISO 340:2013 Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
- ISO 341:1976 Textile machinery and accessories — Cotton spinning machinery — Working width [Withdrawn without replacement]
- ISO 342:1983 Textile machinery and accessories — Worsted and woollen cards — Width of cylinder and width on the wire [Withdrawn without replacement]
- ISO/R 343:1963 Textile machinery and accessories — Warp tubes for ring spinning and ring doubling spindles — inch dimensions, tolerances, and gauges [Withdrawn without replacement]
- ISO 344:1981 Textile machinery and accessories — Spinning machines — Flyer bobbins [Withdrawn without replacement]
- ISO/R 345:1963 Shipbuilding details — Tests on galvanized steel wire ropes [Withdrawn without replacement]
- ISO/R 346:1963 Shipbuilding details — Galvanized steel wire ropes [Withdrawn without replacement]
- ISO/R 347:1963 Shipbuilding details — Anchor chains- End shackles [Withdrawn without replacement]
- ISO 348:1981 Hard coal — Determination of moisture in the analysis sample — Direct volumetric method [Withdrawn without replacement]
- ISO 349:2020 Hard coal — Audibert-Arnu dilatometer test
- ISO/R 350:1963 Hard coal — Determination of chlorine by the bomb-combustion method [Withdrawn without replacement]
- ISO 351:1996 Solid mineral fuels — Determination of total sulfur — High temperature combustion method [Withdrawn without replacement]
- ISO 352:1981 Solid mineral fuels — Determination of chlorine — High temperature combustion method [Withdrawn without replacement]
- ISO 353:1975 Processed writing paper and certain classes of printed matter — Method of expression of dimensions [Withdrawn without replacement]
- ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
- ISO 355:2019 Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations
- ISO 356:1996 Essential oils — Preparation of test samples
- ISO/R 357:1963 Acoustics — Expression of the physical magnitudes of sound or noise in air [Withdrawn: replaced with ISO 131, now withdrawn without replacement]
- ISO 358:1975 Cinematography — Maximum aspect ratio of projector aperture for projection of 35 mm non-anamorphic motion-picture film — Specifications [Withdrawn without replacement]
- ISO 359:1983 Cinematography — Projectable image area on 16 mm motion-picture prints — Dimensions and location
- ISO 360:1975 Cinematography — Recording and reproducing head gaps for four-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162]
- ISO 361:1975 Basic ionizing radiation symbol
- ISO 362 Measurement of noise emitted by accelerating road vehicles — Engineering method
- ISO 362-1:2015 Part 1: M and N categories
- ISO 362-2:2009 Part 2: L category
- ISO 362-3:2016 Part 3: Indoor testing M and N categories
- ISO 363 Textile machinery and accessories — Flat steel healds with closed end loops
- ISO 363-1:2006 Part 1: Dimensions of healds manufactured of rolled steel wire
- ISO 363-2:2006 Part 2: Dimensions of healds manufactured of hardened strip steel
- ISO 364:1983 Textile machinery and accessories — Twin wire healds for weaving machines with heald frames
- ISO 365:1982 Textile machinery and accessories — Twin wire healds with inset mail for Jacquard weaving
- ISO 366 Textile machinery and accessories — Reeds
- ISO 366-2:2009 Part 2: Dimensions and designation of metal reeds with plate baulk
- ISO 366-3:2009 Part 3: Dimensions and designation of metal reeds with double-spring baulk
- ISO 366-4:2005 Part 4: Dimensions and designation of plastic-bound metal reeds
- ISO 366-5:2006 Part 5: Dimensions and designation of profile capsules
- ISO 367:1976 Textile machinery and accessories — Metal reeds with plate baulk — Dimensions [Withdrawn: replaced with ISO 366-2]
- ISO 368:2017 Spinning preparatory, spinning and doubling (twisting) machinery — Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
- ISO 369:2009 Machine tools — Symbols for indications appearing on machine tools
- ISO 370:1975 Toleranced dimensions — Conversion from inches into millimetres and vice versa [Withdrawn without replacement]
- ISO/R 371:1964 Terms relating to microcopy apparatus [Withdrawn without replacement]
- ISO/R 372:1964 Paper vocabulary — Fourth series of terms [Withdrawn: replaced with ISO 4046]
- ISO/R 373:1964 General principles for fatigue testing of metals [Withdrawn without replacement]
- ISO 374 Protective gloves against dangerous chemicals and micro-organisms
- ISO 374-1:2016 Part 1: Terminology and performance requirements for chemical risks
- ISO 374-2:2019 Part 2: Determination of resistance to penetration
- ISO 374-4:2019 Part 4: Determination of resistance to degradation by chemicals
- ISO 374-5:2016 Part 5: Terminology and performance requirements for micro-organisms risks
- ISO 375:1974 Steel — Tensile testing of tubes [Withdrawn: replaced with ISO 6892-1]
- ISO 376:2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
- ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
- ISO 378:1980 Gymnastic equipment — Parallel bars [Withdrawn without replacement]
- ISO 379:1980 Gymnastic equipment — Horizontal bar [Withdrawn without replacement]
- ISO/R 380:1964 Gymnastic equipment — Rings [Withdrawn without replacement]
- ISO/R 381:1964 Gymnastic equipment — Vaulting horse and pommeled horse [Withdrawn without replacement]
- ISO/R 382:1964 Gymnastic equipment — Balancing Beam [Withdrawn without replacement]
- ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints
- ISO 384:2015 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
- ISO 385:2005 Laboratory glassware — Burettes
- ISO 386:1977 Liquid-in-glass laboratory thermometers — Principles of design, construction and use [Withdrawn without replacement]
- ISO 387:1977 Hydrometers — Principles of construction and adjustment
- ISO/R 388:1964 ISO metric series for basic thicknesses of sheet and diameters of wire [Withdrawn without replacement]
- ISO 389 Acoustics — Reference zero for the calibration of audiometric equipment
- ISO 389-1:2017 Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
- ISO 389-2:1994 Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones
- ISO 389-3:2016 Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators
- ISO 389-4:1994 Part 4: Reference levels for narrow-band masking noise
- ISO 389-5:2006 Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
- ISO 389-6:2007 Part 6: Reference threshold of hearing for test signals of short duration
- ISO 389-7:2019 Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
- ISO 389-8:2004 Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones
- ISO 389-9:2009 Part 9: Preferred test conditions for the determination of reference hearing threshold levels
- ISO 390:1993 Products in fibre-reinforced cement — Sampling and inspection
- ISO 391:1982 Building and sanitary pipes in asbestos-cement [Withdrawn without replacement]
- ISO 392:1986 Asbestos-cement pipe fittings for building and sanitary purposes
- ISO 393 Asbestos-cement products — Corrugated sheets and fittings for roofing and cladding
- ISO 393-1:1983 Asbestos-cement products — Part 1: Corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
- ISO 393-2:1986 Asbestos-cement products — Part 2: Asbestos-cement-cellulose corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
- ISO 393-3:1984 Asbestos-cement products — Part 3: Asymmetrical section corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
- ISO 393-4:1986 Asbestos-cement products — Part 4: Trapezoidal section sheets for roofing and cladding [Withdrawn without replacement]
- ISO 393-5:1987 Asbestos-cement products — Part 5: Short corrugated and asymmetrical section sheets and fittings for roofing [Withdrawn without replacement]
- ISO/R 394:1964 Asymmetrical section corrugated sheets in asbestos-cement for roofing and cladding [Withdrawn without replacement]
- ISO 395:1983 Asbestos-cement slates [Withdrawn without replacement]
- ISO 396 Products in fibre reinforced cement
- ISO 396-1:1980 Part 1: Asbestos-cement flat sheets [Withdrawn without replacement]
- ISO 396-2:1980 Part 2: Silica-asbestos-cement flat sheets [Withdrawn without replacement]
- ISO 396-3:1980 Part 3: Cellulose-asbestos-cement flat sheets [Withdrawn without replacement]
- ISO/R 397:1964 Copper and copper alloys — Wire — Wrapping test [Withdrawn: replaced with ISO 7802]
- ISO/R 398:1964 Copper and copper alloys — Bend test [Withdrawn: replaced with ISO 7438]
- ISO/R 399:1964 Copper and copper alloys — Vickers hardness test [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO/R 400:1964 Copper and copper alloys — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 401:1964 Copper and copper alloys — Tubes of circular section — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 402:1964 Copper and copper alloys — Wire — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 403:1964 Copper and copper alloys — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO 404:2013 Steel and steel products — General technical delivery requirements
- ISO/R 405:1964 Aircraft — Tow bar attachment fittings — Interface requirements [Withdrawn: replaced with ISO 8267, and later ISO 8267-1 and ISO 8267-2]
- ISO 406:1987 Technical drawings — Tolerancing of linear and angular dimensions [Withdrawn: replaced with ISO 129-1 and ISO 14405-2]
- ISO 407:2004 Small medical gas cylinders — Pin-index yoke-type valve connections
- ISO/R 408:1964 Safety Colours [Withdrawn: replaced with ISO 3864-1]
- ISO 409 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces
- ISO 409-1:1982 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO 409-2:1983 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO 410:1982 Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO/R 411:1964 Pesticides — Common names — Fifth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 412:1976 Gum spirit of turpentine and wood turpentines for paints and varnishes [Withdrawn without replacement]
- ISO 413:1974 Aircraft — Heads of lubricating nipples
- ISO/R 414:1965 Aircraft — Tyre Valves [Withdrawn without replacement]
- ISO 415:1975 Envelopes, postcards and similar articles — Cancellation area [Withdrawn without replacement]
- ISO 416:1974 Picture postcards — Area reserved for the address [Withdrawn without replacement]
- ISO 417:1993 Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide [Withdrawn: replaced with ISO 18917]
- ISO 418:2001 Photography — Processing chemicals — Specifications for anhydrous sodium sulfite
- ISO 419:1972 Photography — Processing chemicals — Specifications for sodium thiosulfate pentahydrate [Withdrawn: replaced with ISO 10636]
- ISO 420:1994 Photography — Processing chemicals — Specifications for potassium bromide
- ISO/R 421:1965 Photography — Processing chemicals — Method for indicating the stability of the images of processed black-and white films, plates, and papers [Withdrawn without replacement]
- ISO 422:1994 Photography — Processing chemicals — Specifications for p-methylaminophenol sulfate
- ISO 423:1994 Photography — Processing chemicals — Specifications for hydroquinone
- ISO 424:1994 Photography — Processing chemicals — Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate
- ISO 425:1973 Photography — Sensitized materials — Quantity packaging [Withdrawn without replacement]
- ISO 426 Wrought copper-zinc alloys — Chemical composition and forms of wrought products
- ISO 426-1:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 1: Non-leaded and special copper-zinc alloys [Withdrawn without replacement]
- ISO 426-2:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys [Withdrawn without replacement]
- ISO 427:1983 Wrought copper-tin alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 428:1983 Wrought copper-aluminium alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 429:1983 Wrought copper-nickel alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 430:1983 Wrought copper-nickel-zinc alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 431:1981 Copper refinery shapes [Withdrawn without replacement]
- ISO 432:1989 Ply type conveyor belts — Characteristics of construction [Withdrawn without replacement]
- ISO 433:2017 Conveyor belts — Marking
- ISO/R 434:1965 Y-section V-belts — Lengths [Withdrawn: replaced by ISO 4184]
- ISO 435:1975 Micrographics — ISO character — Description and use [Withdrawn: replaced by ISO 446]
- ISO/R 436:1965 Informative labelling [Withdrawn without replacement]
- ISO 437:1982 Steel and cast iron — Determination of total carbon content — Combustion gravimetric method [Withdrawn without replacement]
- ISO 438:1980 Paper — Determination of bulking thickness and apparent density [Withdrawn: replaced by ISO 534]
- ISO 439:2020 Steel and cast iron — Determination of silicon content — Gravimetric method
- ISO/R 440:1965 Aircraft — shape, size, and direction of operation of lever controls [Withdrawn without replacement]
- ISO 441:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines without automatic drawing-in
- ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels [Withdrawn without replacement]
- ISO/R 443:1965 Aircraft — Marking of gas cylinders [Withdrawn without replacement]
- ISO 444:1981 Phlogopite mica blocks, thins and splittings — Grading by size [Withdrawn without replacement]
- ISO 445:2013 Pallets for materials handling — Vocabulary
- ISO 446:2004 Micrographics — ISO character and ISO test chart No. 1 — Description and use
- ISO 447:1984 Machine tools — Direction of operation of controls
- ISO 448:1981 Gas cylinders for industrial use — Marking for identification of content [Withdrawn without replacement]
- ISO 449:1997 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class A [Withdrawn: replaced with ISO 25862]
- ISO 450:1975 Aircraft — Connection for water of drinkable quality [Withdrawn: replaced with ISO 17775]
- ISO 451:1976 Aircraft — Pressure re-oiling connection
- ISO/R 452:1965 Essential characteristics of 35 mm microfilm ready apparatus [Withdrawn without replacement]
- ISO/R 453:1965 Surface active agents — Vocabulary — First list [Withdrawn: replaced with ISO 862]
- ISO 454:1975 Acoustics — Relation between sound pressure levels of narrow bands of noise in a diffuse field and in a frontally-incident free field for equal loudness [Withdrawn without replacement]
- ISO/R 455:1965 Analysis of soaps — Determination of total crude fatty acids [Withdrawn: replaced with ISO 685]
- ISO 456:1973 Surface active agents — Analysis of soaps — Determination of free caustic alkali
- ISO 457:1983 Soaps — Determination of chloride content — Titrimetric method
- ISO 458 Plastics — Determination of stiffness in torsion of flexible materials
- ISO 458-1:1985 Part 1: General method
- ISO 458-2:1985 Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
- ISO/R 459:1962 Narrow V-belts — Grooved pulleys — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4183]
- ISO/R 460:1962 Narrow V-belts — Lengths — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4184]
- ISO 461 Aircraft — Connectors for ground electrical supplies
- ISO 461-1:2003 Part 1: Design, performance and test requirements
- ISO 461-2:1985 Part 2: Dimensions
- ISO/R 462:1965 Plastics — Determination of the change of mechanical properties after contact with chemical substances [Withdrawn: replaced with ISO 175]
- ISO 463:2006 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
- ISO 464:2015 Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values
- ISO/R 465:1965 Rolling bearings — Double row self-aligning roller bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
- ISO 466:1976 Cinematography — Image produced by 16 mm motion-picture camera aperture — Position and dimensions
- ISO/R 467:1966 Preferred modules and diametral pitches of cylindrical gears for general engineering [Withdrawn without replacement]
- ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements [Withdrawn without replacement]
- ISO/R 469:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635]
- ISO/R 470:1966 Aircraft — Conductors for heat-resisting aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635]
- ISO 471:1995 Rubber — Temperatures, humidities and times for conditioning and testing [Withdrawn: replaced with ISO 23529]
- ISO 472:2013 Plastics — Vocabulary
- ISO 473:2019 Lithopone pigments — General requirements and methods of testing
- ISO/R 474:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Performance requirements [Withdrawn without replacement]
- ISO/R 475:1966 Rectangular refractory bricks — Dimensions [Withdrawn: replaced with ISO 5019-1]
- ISO 476:1982 Textile machinery and accessories — Pirn winding machines — Vocabulary
- ISO 477:1982 Textile machinery and accessories — Cone and cheese winding machines — Vocabulary
- ISO 478:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range [Withdrawn: replaced with ISO 217]
- ISO 479:1975 Paper — Untrimmed sizes — Designation and tolerances [Withdrawn: replaced with ISO 217]
- ISO/R 480:1966 Perforated metal cheese centres for bast fibre yearns [Withdrawn without replacement]
- ISO 481:1977 Textile machinery and accessories — Warper’s beams — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-2]
- ISO 482:1977 Aircraft — Propulsion units and components — Methods of numbering and describing direction of rotation [Withdrawn without replacement]
- ISO 483:2005 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
- ISO 484 Shipbuilding — Ship screw propellers — Manufacturing tolerances
- ISO 484-1:2015 Part 1: Propellers of diameter greater than 2,50 m
- ISO 484-2:2015 Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
- ISO 485:1973 Aircraft water-methanol pressure connections
- ISO 486:1988 Cinematography — 16 mm motion-picture film perforated 8 mm Type R — Cutting and perforating dimensions
- ISO 487:1998 Steel roller chains, types S and C, attachments and sprockets
- ISO 488:2008 Milk — Determination of fat content — Gerber butyrometers [Withdrawn: replaced with ISO 19662]
- ISO 489:1999 Plastics — Determination of refractive index
- ISO 490:1993 Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) — Positions and width dimensions
- ISO 491:2002 Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions
- ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
- ISO 493:1975 Aircraft — Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
- ISO 494:2017 Cylindrical shank twist drills — Long series
- ISO 495:1966 Acoustics — Determination of sound power levels of noise sources [Withdrawn: replaced with ISO 3740, ISO 3741, ISO 3742, ISO 3743, ISO 3744, ISO 3745, and ISO 3746]
- ISO 496:1973 Driving and driven machines — Shaft heights [Withdrawn without replacement]
- ISO 497:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
- ISO 498:1992 Natural rubber latex concentrate — Preparation of dry films
- ISO/R 499:1966 Paper — Internal diameters of cores of reels [Withdrawn without replacement]
- ISO 500 – ISO 699
- ISO 500 Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4[Note 3]
- ISO 501:2012 Hard coal — Determination of the crucible swelling number
- ISO 502:2015 Coal — Determination of caking power — Gray-King coke test
- ISO/R 503:1966 Wrought magnesium-aluminium-zinc alloys — Chemical composition [Withdrawn: replaced with ISO 3116]
- ISO 504:1975 Turning tools with carbide tips — Designation and marking
- ISO 505:2017 Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts
- ISO 506:2020 Rubber latex, natural, concentrate — Determination of volatile fatty acid number
- ISO/R 507:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using frequency weighting [Withdrawn: replaced with ISO 3891]
- ISO/R 508:1966 Ships and marine technology — Identification colours for the content of piping systems [Withdrawn: replaced with ISO 14726-1, now ISO 14726]
- ISO 509:1996 Pallet trucks — Principal dimensions [Withdrawn without replacement]
- ISO 510:1977 Red lead for paints
- ISO 511:1977 White lead pigments for paints [Withdrawn without replacement]
- ISO 512:1979 Road vehicles — Sound signalling devices — Technical specifications [Withdrawn without replacement]
- ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
- ISO 514:2014 Turning tools with carbide tips — Internal tools
- ISO 515:1973 Photography — Stereo systems using 35 mm objectives on 35 mm film, five-perforation format — Specifications [Withdrawn without replacement]
- ISO 516:2019 Camera shutters — Timing — General definition and mechanical shutter measurements
- ISO 517:2008 Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
- ISO 518:2006 Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification
- ISO 519:1992 Photography — Hand-held cameras — Flash-connector dimensions
- ISO 520:2010 Cereals and pulses — Determination of the mass of 1 000 grains
- ISO 521:2011 Machine chucking reamers with cylindrical shanks and Morse taper shanks
- ISO 522:1975 Special tolerances for reamers
- ISO 523:1974 Milling cutters — Recommended range of outside diameters [Withdrawn without replacement]
- ISO/R 524:1966 Hard metal wire drawing dies — Interchangeability dimensions of pellets and cases [Withdrawn without replacement]
- ISO 525:2020 Bonded abrasive products — Shape types, designation and marking
- ISO/R 526:1966 Significance to purchasers of marks indicating conformitity with standards [Withdrawn without replacement]
- ISO 527 Plastics — Determination of tensile properties
- ISO 527-1:2019 Part 1: General principles
- ISO 527-2:2012 Part 2: Test conditions for moulding and extrusion plastics
- ISO 527-3:2018 Part 3: Test conditions for films and sheets
- ISO 527-4:2021 Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- ISO 527-5:2009 Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
- ISO 528:1983 Refractory products — Determination of pyrometric cone equivalent (refractoriness)
- ISO 529:2017 Short machine taps and hand taps
- ISO 530:1975 Aircraft — General purpose push-pull single-pole circuit-breakers — Dimensions
- ISO/R 531:1966 Cast iron sanitary pipes and fittings for waste water and ventilation [Withdrawn without replacement]
- ISO 532 Acoustics — Methods for calculating loudness
- ISO 532-1:2017 Part 1: Zwicker method
- ISO 532-2:2017 Part 2: Moore-Glasberg method
- ISO/R 533:1966 Rolling bearings — Double row cylindrical roller bearings type with tapered bore 1:12 [Withdrawn without replacement]
- ISO 534:2011 Paper and board — Determination of thickness, density and specific volume
- ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method
- ISO 536:2019 Paper and board — Determination of grammage
- ISO 537:1989 Plastics — Testing with the torsion pendulum [Withdrawn: replaced with ISO 6721-1, ISO 6721-2, ISO 6721-4, and ISO 6721-10]
- ISO/R 538:1967 Conventional signs to be used in the schemes for the installations of pipeline systems in ships [Withdrawn without replacement]
- ISO/R 539:1967 Acoustics — Dimensions and conductor resistance of heat-resisting (260°C) electrical cables with copper conductors [Withdrawn without replacement]
- ISO 540:2008 Hard coal and coke — Determination of ash fusibility
- ISO/R 541:1967 Measurement of fluid flow by means of orifice plates and nozzles [Withdrawn: replaced with ISO 5167, later ISO 5167-1]
- ISO 542:1990 Oilseeds — Sampling [Withdrawn: replaced with ISO 21294]
- ISO 543:1990 Photography — Photographic films — Specifications for safety film [Withdrawn: replaced with ISO 18906]
- ISO 544:2017 Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings
- ISO 545:1975 Filler rods, other than drawn or extruded, for welding — Lengths and tolerance [Withdrawn: replaced with ISO 544]
- ISO 546:1975 Drawn or extruded filler rods for welding, supplied in straight lengths — Lengths and tolerance [Withdrawn: replaced with ISO 544]
- ISO 547:1975 Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance [Withdrawn: replaced with ISO 544]
- ISO 548:1981 Manganese ores — Determination of barium oxide content — Barium sulphate gravimetric method
- ISO 549:1981 Manganese ores — Determination of combined water content — Gravimetric method
- ISO 550:1981 Manganese ores — Determination of titanium content [Withdrawn: replaced with ISO 7723]
- ISO 551:1975 Manganese ores — Determination of zinc content — Zinc mercurithyocyanate gravimetric method [Withdrawn without replacement]
- ISO 552:1975 Manganese ores and concentrates — Determination of calcium and magnesium contents [Withdrawn: replaced with ISO 6233]
- ISO 553:1981 Manganese ores — Determination of vanadium content — Titrimetric method and phosphotungstovanadate photometric method [Withdrawn without replacement]
- ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
- ISO 555 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow
- ISO 555-1:1973 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 1: Constant-rate injection method [Withdrawn without replacement]
- ISO 555-2:1987 Liquid flow measurement in open channels — Dilution methods for the measurement of steady flow — Part 2: Integration method [Withdrawn without replacement]
- ISO 556:2020 Coke (greater than 20 mm in size) — Determination of mechanical strength
- ISO/R 557:1967 Safety Signs [Withdrawn: replaced with ISO 3864-1]
- ISO 558:1980 Conditioning and testing — Standard atmospheres — Definitions
- ISO 559:1991 Steel tubes for water and sewage [Withdrawn without replacement]
- ISO 560:1975 Cold drawn precision steel tubes — Metric series — Dimensions and masses per metre [Withdrawn: replaced with ISO 4200]
- ISO 561:1989 Coal preparation plant — Graphical symbols
- ISO 562:2010 Hard coal and coke — Determination of volatile matter
- ISO 563:1981 Equipment for harvesting — Knife sections for agricultural cutter bars [Withdrawn without replacement]
- ISO/R 564:1967 Aerospace — Preformed flexible steel wire rope for aircraft controls — Dimensions and loads [Withdrawn: replaced with ISO 2020, later ISO 2020-1]
- ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
- ISO/R 566:1967 Pesticides — Common names — Sixth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 567:1995 Coke — Determination of bulk density in a small container
- ISO 568:1976 Textile machinery and accessories — Heald frames for single or double row of healds — Designation of dimensions [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2]
- ISO 569:1982 Textile machinery and accessories — Heald frames — Co-ordinated dimensions in relation to the pitch of the harness [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2]
- ISO 570:1982 Textile machinery and accessories — Heald carrying rods for healds with closed O-shaped end loops
- ISO 571:1976 Textile machinery and accessories — Metal reeds with double-spring baulk — Dimensions [Withdrawn: Replaced with ISO 366-3]
- ISO 572:1976 Textile machinery and accessories — Shuttles for pirn changing automatic looms — Dimensions [Withdrawn without replacement]
- ISO 573:1976 Textile machinery and accessories — Dobby lags and pegs in wood, metal or other suitable material — Dimensions [Withdrawn without replacement]
- ISO 574:1979 Textile machinery and accessories — Perforated cylindrical tubes for cheese dyeing [Withdrawn: Replaced with ISO 3914-7]
- ISO 575:1978 Textile machinery and accessories — Transfer cones — Half angle of the cone 4 degrees 20′ [Withdrawn without replacement]
- ISO 576:1976 Textile machinery and accessories — Paper patterns for dobbies — Dimensions [Withdrawn without replacement]
- ISO/R 577 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances
- ISO/R 577-1:1967 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 1: Normal tolerances [Withdrawn: Replaced with ISO 492]
- ISO/R 577-2:1968 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 2: Tolerances classes 6 and 5 [Withdrawn: Replaced with ISO 492]
- ISO 577-3:1973 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 3: Tolerances classes 4 [Withdrawn: Replaced with ISO 492]
- ISO 578:1987 Tapered roller bearings — Inch series — Tolerances [Withdrawn without replacement]
- ISO 579:2013 Coke — Determination of total moisture
- ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
- ISO/TR 581:2005 Weldability — Metallic materials — General principles
- ISO 582:1995 Rolling bearings — Chamfer dimensions — Maximum values
- ISO 583:2007 Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods
- ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
- ISO 585:1990 Plastics — Unplasticized cellulose acetate — Determination of moisture content
- ISO/R 586:1967 Coke — Determination of ash [Withdrawn: replaced with ISO 1171]
- ISO 587:2020 Coal and coke — Determination of chlorine using Eschka mixture
- ISO/R 588 was incorporated into ISO/R 862[3]
- ISO 589:2008 Hard coal — Determination of total moisture
- ISO 590:1981 Oil of brazilian sassafras [Withdrawn without replacement]
- ISO 591 Titanium dioxide pigments for paints
- ISO 591-1:2000 Part 1: Specifications and methods of test
- ISO 592:1998 Essential oils — Determination of optical rotation
- ISO 593:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range [Withdrawn: replaced with ISO 217]
- ISO 594 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment
- ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 1: General requirements [Withdrawn: replaced with ISO 80369-7]
- ISO 594-2:1998 Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings [Withdrawn: replaced with ISO 80369-7]
- ISO 595 Reusable all-glass or metal-and-glass syringes for medical use [Withdrawn without replacement]
- ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use — Part 1: Dimensions [Withdrawn without replacement]
- ISO 595-2:1987 Reusable all-glass or metal-and-glass syringes for medical use — Part 2: Design, performance requirements and tests [Withdrawn without replacement]
- ISO/R 596:1967 Hypodermic needles [Withdrawn without replacement]
- ISO/R 597:1967 Definitions and terminology of cements [Withdrawn without replacement]
- ISO/R 598:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for fillet welds for these positions [Withdrawn: replaced by ISO 6947]
- ISO 599:1985 Plastics — Polyamide homopolymers — Determination of matter extractable by boiling methanol [Withdrawn: replaced by ISO 6427]
- ISO/R 600:1967 Plastics — Polyamide homopolymers — Determination of the viscosity ratio in concentrated solution [Withdrawn without replacement]
- ISO 601:1981 Solid mineral fuels — Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 [Withdrawn without replacement]
- ISO 602:2015 Coal — Determination of mineral matter
- ISO 603 Bonded abrasive products — Dimensions
- ISO 603-1:1999 Part 1: Grinding wheels for external cylindrical grinding between centres
- ISO 603-2:1999 Part 2: Grinding wheels for centreless external cylindrical grinding
- ISO 603-3:1999 Part 3: Grinding wheels for internal cylindrical grinding
- ISO 603-4:1999 Part 4: Grinding wheels for surface grinding/peripheral grinding
- ISO 603-5:1999 Part 5: Grinding wheels for surface grinding/face grinding
- ISO 603-6:1999 Part 6: Grinding wheels for tool and tool room grinding
- ISO 603-7:1999 Part 7: Grinding wheels for manually guided grinding
- ISO 603-8:1999 Part 8: Grinding wheels for deburring and fettling/snagging
- ISO 603-9:1999 Part 9: Grinding wheels for high-pressure grinding
- ISO 603-10:1999 Part 10: Stones for honing and superfinishings
- ISO 603-11:1999 Part 11: Hand finishing sticks
- ISO 603-12:1999 Part 12: Grinding wheels for deburring and fettling on a straight grinder
- ISO 603-13:1999 Part 13: Grinding wheels for deburring and fettling on a vertical grinder
- ISO 603-14:1999 Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
- ISO 603-15:1999 Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines
- ISO 603-16:1999 Part 16: Grinding wheels for cutting-off on hand held power tools
- ISO 603-17:2014 Part 17: Spindle mounted wheels (ISO type 52)
- ISO 603-18:2013 Part 18: Grinding wheels for flat glass edge grinding machines
- ISO 604:2002 Plastics — Determination of compressive properties
- ISO 605:1991 Pulses — Determination of impurities, size, foreign odours, insects, and species and variety — Test methods
- ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- ISO 607:1980 Surface active agents and detergents — Methods of sample division
- ISO/R 608:1967 Classical V-belts — Lengths (sections A, B, C, D, and E) [Withdrawn: replaced with ISO 4184]
- ISO 609:1996 Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method
- ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs
- ISO 611:2003 Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary
- ISO 612:1978 Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
- ISO 613:2000 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class B [Withdrawn: replaced by ISO 25862]
- ISO 614:2012 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
- ISO/R 615:1967 Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter [Withdrawn without replacement]
- ISO 616:1995 Coke — Determination of shatter indices
- ISO/R 617:1967 Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress [Withdrawn without replacement]
- ISO 618:1974 Paper — Articles of stationery that include detachable sheets — Overall trimmed sizes [Withdrawn without replacement]
- ISO 619:1981 Manganese ores — Determination of chromium content — Diphenylcarbazide photometric method and silver persulphate titrimetric method
- ISO 620:1975 Manganese ores — Determination of zinc content — Polarographic method (zinc content between 0,005 and 0,1 %) [Withdrawn without replacement]
- ISO 621:1981 Manganese ores — Determination of metallic iron content (metallic iron content not exceeding 2 %) — Sulphosalicylic acid photometric method [Withdrawn without replacement]
- ISO 622:2016 Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method
- ISO 623:1974 Paper and board — Folders and files — Sizes [Withdrawn without replacement]
- ISO 624:1974 Pulps — Determination of dichloromethane soluble matter [Withdrawn: replaced with ISO 14453]
- ISO 625:1996 Solid mineral fuels — Determination of carbon and hydrogen — Liebig method
- ISO/R 626:1967 Strength calculation of butt welded joints [Withdrawn without replacement]
- ISO/R 627:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for butt welds for these positions [Withdrawn: replaced by ISO 6947]
- ISO/R 628:1967 Pesticides — Common names — Seventh series of terms [Withdrawn: replaced with ISO 1750]
- ISO 629:1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method
- ISO 630 Structural steels
- ISO 630-1:2011 Part 1: General technical delivery conditions for hot-rolled products
- ISO 630-2:2011 Part 2: Technical delivery conditions for structural steels for general purposes
- ISO 630-3:2012 Part 3: Technical delivery conditions for fine-grain structural steels
- ISO 630-4:2012 Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
- ISO 630-5:2014 Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- ISO 630-6:2014 Part 6: Technical delivery conditions for seismic-improved structural steels for building
- ISO 631:1975 Mosaic parquet panels — General characteristics
- ISO/R 632:1967 Methods of test for determining whether an electrode is a deep penetration electrode [Withdrawn without replacement]
- ISO 633:2019 Cork — Vocabulary
- ISO/R 634:1967 Aircraft — Methods of test for general purpose electrical cables with copper conductors [Withdrawn without replacement]
- ISO/R 635:1967 Welding consumables — Code of symbols for covered electrodes for arc welding of mild steels and low alloy high tensile steels [Withdrawn without replacement]
- ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
- ISO 637:1975 Filler rods for gas welding of mild steels and low alloy high tensile steels — Determination of mechanical properties of deposited weld metal [Withdrawn without replacement]
- ISO 638 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method
- ISO 638-1:2021 Part 1: Materials in solid form
- ISO 638-2:2021 Part 2: Suspensions of cellulosic nanomaterials
- ISO 639 Codes for the representation of names of languages
- ISO 639-1:2002 Part 1: Alpha-2 code
- ISO 639-2:1998 Part 2: Alpha-3 code
- ISO 639-3:2007 Part 3: Alpha-3 code for comprehensive coverage of languages
- ISO 639-4:2010 Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines
- ISO 639-5:2008 Part 5: Alpha-3 code for language families and groups
- ISO 639-6:2009 Part 6: Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement]
- ISO 640:1984 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-3]
- ISO 640-2:1993 Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-3]
- ISO 641:1975 Laboratory glassware — Interchangeable spherical ground joints
- ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
- ISO 643:2019 Steels — Micrographic determination of the apparent grain size
- ISO/R 644:1967 Conventional signs to be used in schemes for the installations of ventilation systems in ships [Withdrawn without replacement]
- ISO/R 645:1967 Statistics — Vocabulary and symbols — First series [Withdrawn: replaced with ISO 3534]
- ISO/IEC 646:1991 Information technology — ISO 7-bit coded character set for information interchange
- ISO 647:2017 Brown coals and lignites — Determination of the yields of tar, water, gas and coke residue by low temperature distillation
- ISO 648:2008 Laboratory glassware — Single-volume pipettes
- ISO 649 Laboratory glassware — Density hydrometers for general purposes
- ISO 649-1:1981 Part 1: Specification
- ISO 649-2:1981 Part 2: Test methods and use
- ISO 650:1977 Relative density 60/60 degrees F hydrometers for general purposes
- ISO 651:1975 Solid-stem calorimeter thermometers [Withdrawn without replacement]
- ISO 652:1975 Enclosed-scale calorimeter thermometers [Withdrawn without replacement]
- ISO 653:1980 Long solid-stem thermometers for precision use [Withdrawn without replacement]
- ISO 654:1980 Short solid-stem thermometers for precision use [Withdrawn without replacement]
- ISO 655:1980 Long enclosed-scale thermometers for precision use [Withdrawn without replacement]
- ISO 656:1980 Short enclosed-scale thermometers for precision use [Withdrawn without replacement]
- ISO 657 Hot-rolled steel sections
- ISO 658:2002 Oilseeds — Determination of content of impurities
- ISO 659:2009 Oilseeds — Determination of oil content (Reference method)
- ISO 660:2020 Animal and vegetable fats and oils — Determination of acid value and acidity
- ISO 661:2003 Animal and vegetable fats and oils — Preparation of test sample
- ISO 662:2016 Animal and vegetable fats and oils — Determination of moisture and volatile matter content
- ISO 663:2017 Animal and vegetable fats and oils — Determination of insoluble impurities content
- ISO 664:2008 Oilseeds — Reduction of laboratory sample to test sample
- ISO 665:2020 Oilseeds — Determination of moisture and volatile matter content
- ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges
- ISO 667:1981 Rubber, compounded — Determination of cure rate — Shearing disk method [Withdrawn: replaced with ISO 289-2]
- ISO 668:2020 Series 1 freight containers — Classification, dimensions and ratings
- ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
- ISO/R 670:1968 Straight resistance spot welding electrodes — Mechanical and electrical requirements [Withdrawn: replaced with ISO 5184]
- ISO 671:1982 Steel and cast iron — Determination of sulphur content — Combustion titrimetric method
- ISO 672:1978 Soaps — Determination of moisture and volatile matter content — Oven method
- ISO 673:1981 Soaps — Determination of content of ethanol-insoluble matter
- ISO 674:1988 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A – B – C – D – E – F – G – H – K) [Withdrawn: replaced with ISO 6508-3]
- ISO 675:2014 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point
- ISO 676:1995 Spices and condiments — Botanical nomenclature
- ISO 677:1976 Straight bevel gears for general engineering and heavy engineering — Basic rack
- ISO 678:1976 Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches
- ISO 679:2009 Cement — Test methods — Determination of strength
- ISO 680:1990 Cement — Test methods — Chemical analysis [Withdrawn: replaced with ISO 29581-1]
- ISO/R 681:1968 Chemical analysis of cements — Minor constituents of Portland cement [Withdrawn without replacement]
- ISO/R 682:1968 Chemical analysis of cements — Determination of sulphur as sulphide [Withdrawn without replacement]
- ISO 683 Heat-treatable steels, alloy steels and free-cutting steels
- ISO 683-1:2016 Part 1: Non-alloy steels for quenching and tempering
- ISO 683-2:2016 Part 2: Alloy steels for quenching and tempering
- ISO 683-3:2022 Part 3: Case-hardening steels
- ISO 683-4:2016 Part 4: Free-cutting steels
- ISO 683-5:2017 Part 5: Nitriding steels
- ISO 683-14:2004 Part 14: Hot-rolled steels for quenched and tempered springs
- ISO 683-15:1992 Part 15: Valve steels for internal combustion engines
- ISO 683-17:2014 Part 17: Ball and roller bearing steels
- ISO 683-18:2014 Part 18: Bright steel products
- ISO 684:1974 Analysis of soaps — Determination of total free alkali
- ISO 685:2020 Analysis of soaps — Determination of total alkali content and total fatty matter content
- ISO 686:1985 Photography — 35 mm filmstrips — Specifications for double-frame and single-frame formats [Withdrawn without replacement]
- ISO 687:2010 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
- ISO 688:1975 Filler rods for braze welding — Determination of characteristics of deposited metal [Withdrawn without replacement]
- ISO 689:1975 Microcopying — ISO micromire — Description and use for checking a reading apparatus [Withdrawn without replacement]
- ISO 690:2010 Information and documentation — Guidelines for bibliographic references and citations to information resources
- ISO 691:2005 Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use
- ISO 692:1982 Pulps — Determination of alkali solubility
- ISO 693:1982 Dimensions of seam welding wheel blanks
- ISO 694:2000 Ships and marine technology — Positioning of magnetic compasses in ships [Withdrawn: replaced by ISO 25862]
- ISO 695:1991 Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification
- ISO 696:1975 Surface active agents — Measurement of foaming power — Modified Ross-Miles method
- ISO 697:1981 Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume
- ISO 698:1975 Filler rods for braze welding — Determination of conventional bond strength on steel, cast iron and other metals [Withdrawn without replacement]
- ISO 699:2015 Pulps — Determination of alkali resistance
- ISO 700 – ISO 999
- ISO 700:1982 Power sources for manual metal arc welding with covered electrodes and for the TIG process [Withdrawn: replaced by IEC 60974-1:1998, now withdrawn without replacement]
- ISO 701:1998 International gear notation — Symbols for geometrical data
- ISO 702 Machine tools — Connecting dimensions of spindle noses and work holding chucks
- ISO 702-1:2009 Part 1: Conical connection
- ISO 702-2:2007 Part 2: Camlock type
- ISO 702-3:2007 Part 3: Bayonet type
- ISO 702-4:2004 Part 4: Cylindrical connection
- ISO 703:2017 Conveyor belts — Transverse flexibility (troughability) — Test method
- ISO 704:2009 Terminology work — Principles and methods
- ISO 705:2015 Rubber latex — Determination of density between 5 degrees C and 40 degrees C
- ISO 706:2004 Rubber latex — Determination of coagulum content (sieve residue)
- ISO 707:2008 Milk and milk products — Guidance on sampling
- ISO/R 708:1968 Filler rods for gas welding — Test to determine the compatibility of steel filler rods and the parent metal in the welding of steels [Withdrawn without replacement]
- ISO 709:2001 Essential oils — Determination of ester value
- ISO 710 Graphical symbols for use on detailed maps, plans and geological cross-sections
- ISO 710-1:1974 Part 1: General rules of representation
- ISO 710-2:1974 Part 2: Representation of sedimentary rocks
- ISO 710-3:1974 Part 3: Representation of magmatic rocks
- ISO 710-4:1982 Part 4: Representation of metamorphic rocks
- ISO 710-5:1989 Part 5: Representation of minerals
- ISO 710-6:1984 Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
- ISO 710-7:1984 Part 7: Tectonic symbols
- ISO 711:1985 Cereals and cereal products — Determination of moisture content (Basic reference method) [Withdrawn without replacement]
- ISO 712:2009 Cereals and cereal products — Determination of moisture content — Reference method
- ISO 713:1975 Zinc — Determination of lead and cadmium contents — Polarographic method [Withdrawn without replacement]
- ISO 714:1975 Zinc — Determination of iron content — Photometric method
- ISO 715:1975 Zinc — Determination of lead content — Polarographic method [Withdrawn without replacement]
- ISO 716:1986 Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A – B – C – D – E – F – G – H – K) [Withdrawn: replaced with ISO 6508-2]
- ISO 717 Acoustics — Rating of sound insulation in buildings and of building elements
- ISO 717-1:2020 Part 1: Airborne sound insulation
- ISO 717-2:2020 Part 2: Impact sound insulation
- ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods
- ISO 719:2020 Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification
- ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
- ISO 721:1991 Rock drilling equipment — Integral stems
- ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round
- ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
- ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
- ISO 725:2009 ISO inch screw threads — Basic dimensions
- ISO 726:1982 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-3]
- ISO 727 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure
- ISO 727-1:2002 Part 1: Metric series
- ISO 727-2:2005 Part 2: Inch-based series
- ISO 728:2021 Coke — Size analysis by sieving
- ISO 729:1988 Oilseeds — Determination of acidity of oils
- ISO 730:2009 Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
- ISO 731 Formic acid for industrial use — Methods of test
- ISO 731-1:1977 Formic acid for industrial use — Methods of test — Part 1: General [Withdrawn without replacement]
- ISO 731-2:1977 Formic acid for industrial use — Methods of test — Part 2: Determination of total acidity — Titrimetric method [Withdrawn without replacement]
- ISO 731-3:1977 Formic acid for industrial use — Methods of test — Part 3: Determination of content of other acids — Potentiometric method [Withdrawn without replacement]
- ISO 731-4:1977 Formic acid for industrial use — Methods of test — Part 4: Visual limit test for inorganic chlorides [Withdrawn without replacement]
- ISO 731-5:1977 Formic acid for industrial use — Methods of test — Part 5: Visual limit test for inorganic sulphates [Withdrawn without replacement]
- ISO 731-6:1977 Formic acid for industrial use — Methods of test — Part 6: Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 731-7:1977 Formic acid for industrial use — Methods of test — Part 7: Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn without replacement]
- ISO 732:2000 Photography — 120-size and 220-size films — Dimensions
- ISO/R 733:1968 Hexagon bolts and nuts — Metric series — Tolerances on widths across flats, widths across corners [Withdrawn: replaced with ISO 4759-1]
- ISO 734:2015 Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum)
- ISO 735:1977 Oilseed residues — Determination of ash insoluble in hydrochloric acid
- ISO 736:1977 Oilseed residues — Determination of diethyl ether extract [Withdrawn without replacement]
- ISO 737:1975 Coniferous sawn timber — Sizes — Methods of measurement
- ISO 738:2015 Coniferous sawn timber — Sizes — Permissible deviations and shrinkage [Withdrawn without replacement]
- ISO 739:1976 Sodium carbonate for industrial use — Preparation and storage of test samples
- ISO 740:1976 Sodium carbonate for industrial use — Determination of total soluble alkalinity — Titrimetric method
- ISO 741:1976 Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method [Withdrawn without replacement]
- ISO 742:1973 Sodium carbonate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
- ISO 743:1976 Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
- ISO/R 744:1968 Sodium carbonate for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 745:1976 Sodium carbonate for industrial use — Determination of loss of mass and of non-volatile matter at 250 degrees C [Withdrawn without replacement]
- ISO 746:1976 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C
- ISO/R 747:1968 Sodium carbonate for industrial use — Expression of test results [Withdrawn without replacement]
- ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats — Velocity area methods using point velocity measurements
- ISO 749:1977 Oilseed residues — Determination of total ash
- ISO 750:1998 Fruit and vegetable products — Determination of titratable acidity
- ISO 751:1998 Fruit and vegetable products — Determination of water-insoluble solids
- ISO 752:2004 Zinc ingots
- ISO 753 Acetic acid for industrial use — Methods of test
- ISO 753-1:1981 Part 1: General [Withdrawn without replacement]
- ISO 753-2:1981 Part 2: Determination of acetic acid content — Titrimetric method [Withdrawn without replacement]
- ISO 753-3:1981 Part 3: Determination of formic acid content — Iodometric method [Withdrawn without replacement]
- ISO 753-4:1981 Part 4: Determination of acetaldehyde monomer content — Titrimetric method [Withdrawn without replacement]
- ISO 753-5:1981 Part 5: Determination of total acetaldehyde content — Titrimetric method [Withdrawn without replacement]
- ISO 753-6:1981 Part 6: Determination of permanganate index [Withdrawn without replacement]
- ISO 753-7:1981 Part 7: Determination of dichromate index [Withdrawn without replacement]
- ISO 753-8:1981 Part 8: Visual limit test for inorganic chlorides [Withdrawn without replacement]
- ISO 753-9:1981 Part 9: Visual limit test for inorganic sulphates [Withdrawn without replacement]
- ISO 753-10:1981 Part 10: Visual limit test for heavy metals (including iron) [Withdrawn without replacement]
- ISO 754:1982 Acetic anhydride for industrial use — Methods of test [Withdrawn without replacement]
- ISO 755 Butan-1-ol for industrial use — Methods of test
- ISO 755-1:1981 Part 1: General [Withdrawn without replacement]
- ISO 755-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement]
- ISO 755-3:1981 Part 3: Sulphuric acid colour test [Withdrawn without replacement]
- ISO 756 Propan-2-ol for industrial use — Methods of test
- ISO 756-1:1981 Part 1: General
- ISO 756-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement]
- ISO 756-3:1981 Part 3: Test for miscibility with water [Withdrawn without replacement]
- ISO 757 Acetone for industrial use — Methods of test
- ISO 757-1:1982 Part 1: General [Withdrawn without replacement]
- ISO 757-2:1982 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement]
- ISO 757-3:1982 Part 3: Test for miscibility with water [Withdrawn without replacement]
- ISO 757-4:1983 Part 4: Determination of permanganate time [Withdrawn without replacement]
- ISO 757-5:1982 Part 5: Control test with Agulhon’s reagent [Withdrawn without replacement]
- ISO 758:1976 Liquid chemical products for industrial use — Determination of density at 20 degrees C
- ISO 759:1981 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
- ISO 760:1978 Determination of water — Karl Fischer method (General method)
- ISO 761:1977 Acetic anhydride and butan-1-ol for industrial use — Determination of bromine number [Withdrawn without replacement]
- ISO 762:2003 Fruit and vegetable products — Determination of mineral impurities content
- ISO 763:2003 Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid
- ISO 764:2020 Horology — Magnetic resistant watches
- ISO 765:2016 Pesticides considered not to require common names
- ISO 766:1972 Fibre building boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
- ISO 767:1975 Fibre building boards — Determination of moisture content [Withdrawn: replaced with ISO 9425]
- ISO 768:1972 Fibre building boards — Determination of bending strength [Withdrawn without replacement]
- ISO 769:1972 Fibre building boards — Hard and medium boards — Determination of water absorption and of swelling in thickness after immersion in water [Withdrawn without replacement]
- ISO 770:2002 Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
- ISO 771:1977 Oilseed residues — Determination of moisture and volatile matter content
- ISO 772:2011 Hydrometry — Vocabulary and symbols
- ISO/R 773:1969 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
- ISO/R 774:1969 Taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
- ISO/R 775:1969 Cylindrical and 1/10 conical shaft ends [Withdrawn without replacement]
- ISO 776:2011 Pulps — Determination of acid-insoluble ash
- ISO 777:2005 Paper, board and pulp — Determination of acid-soluble calcium [Withdrawn: replaced with ISO 12830]
- ISO 778:2005 Paper, board and pulp — Determination of acid-soluble copper [Withdrawn: replaced with ISO 12830]
- ISO 779:2005 Paper, board and pulp — Determination of acid-soluble iron [Withdrawn: replaced with ISO 12830]
- ISO 780:2015 Packaging – Distribution packaging — Graphical symbols for handling and storage of packages
- ISO/R 781:1968 Measurement of fluid flow by means of Venturi tubes inserted in circular cross-section conduits running full [Withdrawn: replaced with ISO 5167, later ISO 5167-1]
- ISO 782:1975 Microcopying — Measurement of screen luminance of microfilm readers [Withdrawn without replacement, but later restored as ISO 7565]
- ISO 783:1999 Metallic materials — Tensile testing at elevated temperature [Withdrawn: replaced with ISO 6892-2]
- ISO/R 784:1968 Conventional signs to be used in schemes for the installations of sanitary systems in ships [Withdrawn without replacement]
- ISO/R 785:1968 Pesticides — Common names — Eighth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 786:1968 Units and symbols for refrigeration [Withdrawn without replacement]
- ISO 787 General methods of test for pigments and extenders
- ISO 787-1:1982 Part 1: Comparison of colour of pigments
- ISO 787-2:1981 Part 2: Determination of matter volatile at 105 degrees C
- ISO 787-3:2000 Part 3: Determination of matter soluble in water — Hot extraction method
- ISO 787-4:1981 Part 4: Determination of acidity or alkalinity of the aqueous extract
- ISO 787-5:1980 Part 5: Determination of oil absorption value
- ISO 787-7:2009 Part 7: Determination of residue on sieve — Water method — Manual procedure
- ISO 787-8:2000 Part 8: Determination of matter soluble in water — Cold extraction method
- ISO 787-9:2019 Part 9: Determination of pH value of an aqueous suspension
- ISO 787-10:1993 Part 10: Determination of density — Pyknometer method
- ISO 787-11:1981 Part 11: Determination of tamped volume and apparent density after tamping
- ISO/R 787-12:1970 Part 12: Determination of [Withdrawn without replacement]
- ISO 787-13:2019 Part 13: Determination of water-soluble sulphates, chlorides and nitrates
- ISO 787-14:2019 Part 14: Determination of resistivity of aqueous extract
- ISO 787-15:2019 Part 15: Comparison of resistance to light of coloured pigments of similar types
- ISO 787-16:1986 Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method
- ISO 787-17:2019 Part 17: Comparison of lightening power of white pigments
- ISO 787-18:1983 Part 18: Determination of residue on sieve — Mechanical flushing procedure
- ISO 787-19:2020 Part 19: Determination of water-soluble nitrates (Salicylic acid method)
- ISO 787-20:1979 Part 20: Comparison of ease of dispersion (Oscillatory shaking method) [Withdrawn: replaced with ISO 8780-2]
- ISO 787-21:1979 Part 21: Comparison of heat stability of pigments using a stoving medium
- ISO 787-22:1980 Part 22: Comparison of resistance to bleeding of pigments
- ISO 787-23:1979 Part 23: Determination of density (using a centrifuge to remove entrained air)
- ISO 787-24:1985 Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods
- ISO 787-25:2019 Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
- ISO 787-28:2019 Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS
- ISO 788:2021 Ultramarine pigments
- ISO 789 Agricultural tractors — Test procedures
- ISO 789-1:2018 Part 1: Power tests for power take-off
- ISO 789-2:2018 Part 2: Rear three-point linkage lifting capacity
- ISO 789-3:2015 Part 3: Turning and clearance diameters
- ISO 789-4:1986 Part 4: Measurement of exhaust smoke
- ISO 789-5:1983 Part 5: Partial power PTO — Non-mechanically transmitted power
- ISO 789-6:2019 Part 6: Centre of gravity
- ISO 789-7:1991 Part 7: Axle power determination
- ISO 789-8:1991 Part 8: Engine air cleaner
- ISO 789-9:2018 Part 9: Power tests for drawbar
- ISO/OECD 789-10:2006 Part 10: Hydraulic power at tractor/implement interface
- ISO 789-11:1996 Part 11: Steering capability of wheeled tractors
- ISO 789-12:2000 Part 12: Low temperature starting
- ISO 789-13:2018 Part 13: Vocabulary and specimen test report
- ISO 790:1973 Freight containers — Coding and identification [Withdrawn: replaced with ISO 6346]
- ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method
- ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method
- ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method
- ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method
- ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method
- ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method
- ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method
- ISO/R 798:1968 Chemical analysis of aluminium and its alloys — Gravimetric determination of zinc in aluminium alloys (zinc content between 0.50 and 6.5 %) [Withdrawn: replaced with ISO 1784]
- ISO 799 Ships and marine technology — Pilot ladders
- ISO 799-1:2019 Part 1: Design and specification
- ISO 800:1992 Plastics — Phenolic moulding materials — Specification [Withdrawn: replaced with ISO 14526]
- ISO 801 Pulps — Determination of saleable mass in lots
- ISO 801-1:1994 Part 1: Pulp baled in sheet form
- ISO 801-2:1994 Part 2: Pulps (such as flash-dried pulps) baled in slabs
- ISO 801-3:1994 Part 3: Unitized bales
- ISO 802:1976 Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples [Withdrawn: replaced with ISO 23028]
- ISO 803:1976 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C (conventional moisture) [Withdrawn: replaced with ISO 806]
- ISO 804:1976 Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by alkaline fusion [Withdrawn without replacement]
- ISO 805:1976 Aluminium oxide primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 806:2004 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C and 1 000 degrees C
- ISO/R 807:1968 Chemical analysis of magnesium and magnesium alloys — Polarographic determination of zinc (zinc content between 0.1 and 4 %) [Withdrawn without replacement]
- ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex
- ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %)
- ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %)
- ISO 811:2018 Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
- ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
- ISO 813:2019 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
- ISO 814:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
- ISO 815 Rubber, vulcanized or thermoplastic — Determination of compression set
- ISO 815-1:2019 Part 1: At ambient or elevated temperatures
- ISO 815-2:2019 Part 2: At low temperatures
- ISO 816:1983 Rubber, vulcanized — Determination of tear strength of small test pieces (Delft test pieces) [Withdrawn: replaced with ISO 34-2]
- ISO 817:2014 Refrigerants — Designation and safety classification
- ISO 818:1975 Fibre building boards — Definition — Classification [Withdrawn without replacement]
- ISO 819:1975 Fibre building boards — Determination of density [Withdrawn: replaced with ISO 9427]
- ISO 820:1975 Particle boards — Definition and classification [Withdrawn without replacement]
- ISO 821:1975 Particle boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
- ISO 822:1975 Particle boards — Determination of density [Withdrawn: replaced with ISO 9427]
- ISO 823:1975 Particle boards — Determination of moisture content [Withdrawn: replaced with ISO 9425]
- ISO/R 824 Household refrigerators
- ISO/R 824-1:1968 Part 1: Performance requirements [Withdrawn: replaced with ISO 7371]
- ISO/R 825 Household refrigerators
- ISO/R 825-1:1968 Part 1: Special low-temperature compartments for the storage of frozen foodstuffs [Withdrawn: replaced with ISO 7371]
- ISO/R 826:1968 Mechanical property limits for rolled products of aluminium and aluminium alloys [Withdrawn without replacement]
- ISO/R 827:1968 Mechanical property limits for extruded products of aluminium and aluminium alloys [Withdrawn without replacement]
- IEC/TR 828:1988 Pin allocations for future microprocessor systems using the IEC 603-2 connector [Withdrawn without replacement]
- ISO/R 829:1968 Mechanical property limits for aluminium alloy forgings [Withdrawn without replacement]
- ISO 830:1999 Freight containers — Vocabulary
- ISO/R 831:1968 Rules for construction of stationary boilers [Withdrawn without replacement]
- ISO 832:1994 Information and documentation — Bibliographic description and references — Rules for the abbreviation of bibliographic terms
- ISO 833:1974 Information and documentation — International list of periodical word title abbreviations [Withdrawn without replacement]
- ISO 834 Fire-resistance tests — Elements of building construction
- ISO 834-1:1999 Part 1: General requirements
- ISO 834-2:2019 Part 2: Requirements and recommendations for measuring furnace exposure on test samples
- ISO/TR 834-3:2012 Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
- ISO 834-4:2000 Part 4: Specific requirements for loadbearing vertical separating elements
- ISO 834-5:2000 Part 5: Specific requirements for loadbearing horizontal separating elements
- ISO 834-6:2000 Part 6: Specific requirements for beams
- ISO 834-7:2000 Part 7: Specific requirements for columns
- ISO 834-8:2002 Part 8: Specific requirements for non-loadbearing vertical separating elements
- ISO 834-9:2003 Part 9: Specific requirements for non-loadbearing ceiling elements
- ISO 834-10:2014 Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
- ISO 834-11:2014 Part 11: Specific requirements for the assessment of fire protection to structural steel elements
- ISO 834-12:2012 Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
- ISO 834-13:2019 Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
- ISO 834-14:2019 Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar
- ISO 835:2007 Laboratory glassware — Graduated pipettes
- ISO 836:2001 Terminology for refractories
- ISO/R 837:1968 Aircraft seat rails and pins [Withdrawn: replaced with ISO 7166]
- ISO 838:1974 Paper — Holes for general filing purposes — Specifications
- ISO 839 Milling machine arbors with 7/24 tapers
- ISO 839-1:2006 Part 1: Dimensions and designation
- ISO 839-2:1977 Part 2: Accessories
- ISO 840:1973 Numerical control of machines — 7-bit coded character set [Withdrawn: replaced with ISO 6983-1]
- ISO 841:2001 Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature
- ISO 842:1984 Raw materials for paints and varnishes — Sampling [Withdrawn: replaced with ISO 15528]
- ISO 843:1997 Information and documentation — Conversion of Greek characters into Latin characters
- ISO 844:2014 Rigid cellular plastics — Determination of compression properties
- ISO 845:2006 Cellular plastics and rubbers — Determination of apparent density
- ISO 846:2019 Plastics — Evaluation of the action of microorganisms
- ISO/R 847:1968 Phosphoric acid for industrial use — Determination of sulphate content — Volumetric method [Withdrawn: replaced with ISO 2997]
- ISO 848:1981 Phosphoric acid for industrial use — Determination of calcium content — Titrimetric method [Withdrawn without replacement]
- ISO/R 849:1968 Phosphoric acid for industrial use — Determination of iron content — 2,2′- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 850:1976 Sodium tripolyphosphate for industrial use — Determination of matter insoluble in water [Withdrawn without replacement]
- ISO 851:1976 Sodium tripolyphosphate for industrial use — Measurement of pH — Potentiometric method [Withdrawn without replacement]
- ISO/R 852:1968 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of iron content — 2,2′- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 853:1976 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of loss on ignition [Withdrawn without replacement]
- ISO/R 854:1968 Requirements for 28-volt D.C. flat strip fuses for aircraft [Withdrawn without replacement]
- ISO 855:2003 Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
- ISO 856:2006 Oil of peppermint (Mentha x piperita L.)
- ISO 857 Welding and allied processes — Vocabulary
- ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms
- ISO 858:1973 Fishing nets — Designation of netting yarns in the Tex System
- ISO/R 859:1968 Testing and rating room air conditioners [Withdrawn: replaced with ISO 5151]
- ISO 860:2007 Terminology work — Harmonization of concepts and terms
- ISO/R 861:1968 Hexagon socket head cap screws — Metric series [Withdrawn: replaced with ISO 4762]
- ISO 862:1984 Surface active agents — Vocabulary
- ISO 863:2008 Cement — Test methods — Pozzolanicity test for pozzolanic cements
- ISO 864:1988 Arc welding — Solid and tubular cored wires which deposit carbon and carbon manganese steel — Dimensions of wires, spools, rims and coils [Withdrawn without replacement]
- ISO 865:1981 Slots in platens for projection welding machines
- ISO 866:2016 Centre drills for centre holes without protecting chamfers — Type A
- ISO/R 867:1968 Spindle noses and face plates — Bayonet type — Sizes for interchangeability — Metric series [Withdrawn: replaced with ISO 702-3]
- ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
- ISO/R 869:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Moulding method [Withdrawn without replacement]
- ISO/R 870:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Casting method [Withdrawn without replacement]
- ISO 871:2006 Plastics — Determination of ignition temperature using a hot-air furnace
- ISO/R 872:1968 Plastics — Determination of ash of unplasticized cellulose acetate [Withdrawn: replaced with ISO 3451-3]
- ISO 873:1980 Peaches — Guide to cold storage
- ISO 874:1980 Fresh fruits and vegetables — Sampling
- ISO 875:1999 Essential oils — Evaluation of miscibility in ethanol
- ISO/R 876:1968 Special method of mechanical testing to determine the coding for deep penetration electrodes [Withdrawn without replacement]
- ISO 877 Plastics — Methods of exposure to solar radiation
- ISO 877-1:2009 Part 1: General guidance
- ISO 877-2:2009 Part 2: Direct weathering and exposure behind window glass
- ISO 877-3:2018 Part 3: Intensified weathering using concentrated solar radiation
- ISO/R 878:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of the enclosed carbon arc [Withdrawn: replaced with ISO 4892]
- ISO/R 879:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of a xenon lamp [Withdrawn: replaced with ISO 4892]
- ISO 880:1981 Asbestos-cement siding shingles [Withdrawn without replacement]
- ISO 881:1980 Asbestos-cement pipes, joints and fittings for sewerage and drainage [Withdrawn without replacement]
- ISO 882 Cardamom (Elettaria cardamomum (Linnaeus) Maton var. minuscula Burkill) — Specification
- ISO 882-1:1993 Part 1: Whole capsules
- ISO 882-2:1993 Part 2: Seeds
- ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
- ISO/R 884:1968 Pictorial marking of transit packages containing photographic materials sensitive to radiant energy [Withdrawn: replaced with ISO 780]
- ISO 885:2000 General purpose bolts and screws — Metric series — Radii under the head
- ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %)
- ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes — General plan
- ISO 888:2012 Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
- ISO/R 889:1968 Test code for stationary steam generators of the power station type [Withdrawn without replacement]
- ISO/R 890:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Positions [Withdrawn: replaced with ISO 4242]
- ISO/R 891:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Dimensions [Withdrawn: replaced with ISO 4242]
- ISO/R 892:1968 Cinematography — Dimensions of projection reels for 8 mm motion-picture film (other than type S) [Withdrawn without replacement]
- ISO 893:1989 Surface active agents — Technical alkane sulfonates — Methods of analysis
- ISO 894:1977 Surface active agents — Technical sodium primary alkylsulphates — Methods of analysis
- ISO 895:1977 Surface active agents — Technical sodium secondary alkylsulphates — Methods of analysis
- ISO/TR 896:1977 Surface active agents — Scientific classification [Withdrawn without replacement]
- ISO 897:2000 Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side
- ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
- ISO 899 Plastics — Determination of creep behaviour
- ISO 899-1:2017 Part 1: Tensile creep
- ISO 899-2:2003 Part 2: Flexural creep by three-point loading
- ISO 900:1977 Aluminium oxide primarily used for the production of aluminium — Determination of titanium content — Diantipyrylmethane photometric method [Withdrawn without replacement]
- ISO 901:1976 Aluminium oxide primarily used for the production of aluminium — Determination of absolute density — Pyknometer method [Withdrawn without replacement]
- ISO 902:1976 Aluminium oxide primarily used for the production of aluminium — Measurement of the angle of repose
- ISO 903:1976 Aluminium oxide primarily used for the production of aluminium — Determination of untamped density [Withdrawn without replacement]
- ISO 904:1976 Hydrochloric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement]
- ISO 905:1976 Hydrochloric acid for industrial use — Evaluation of hydrochloric acid concentration by measurement of density [Withdrawn without replacement]
- ISO 906:1976 Hydrochloric acid for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 907:1976 Hydrochloric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
- ISO 908:1980 Hydrochloric acid for industrial use — Determination of oxidizing or reducing substances content — Titrimetric method [Withdrawn without replacement]
- ISO/R 909:1968 Hydrochloric acid for industrial use — Determination of iron content — 2,2′- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 910:1977 Sulphuric acid and oleum for industrial use — Determination of total acidity, and calculation of free sulphur trioxide content of oleum — Titrimetric method
- ISO 911:1977 Sulphuric acid for industrial use — Evaluation of sulphuric acid concentration by measurement of density [Withdrawn without replacement]
- ISO/R 912:1968 Sulphuric acid and oleum for industrial use — Determination of sulphur dioxide content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 913:1977 Sulphuric acid and oleum for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement]
- ISO 914:1977 Sulphuric acid and oleum for industrial use — Determination of total nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
- ISO/R 915:1968 Sulphuric acid and oleum for industrial use — Determination of iron content — 2,2′- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 916:2020 Testing of refrigerating systems
- ISO 917:1989 Testing of refrigerant compressors [Withdrawn without replacement]
- ISO 918:1983 Volatile organic liquids for industrial use — Determination of distillation characteristics
- ISO/R 919:1969 Guide for the preparation of classified vocabularies (example of method) [Withdrawn: replaced with ISO 10241]
- ISO 920:1976 Wool — Determination of fibre length (barbe and hauteur) using a comb sorter
- ISO 921:1997 Nuclear energy — Vocabulary [Withdrawn without replacement]
- ISO/R 922:1969 Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index [Withdrawn: replaced with ISO 1873-1, now replaced by ISO 9113]
- ISO 923:2000 Coal cleaning equipment — Performance evaluation
- ISO 924:1989 Coal preparation plant — Principles and conventions for flowsheets
- ISO 925:2019 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
- ISO/R 926:1969 Solid mineral fuels — Determination of total nitrogen, sulphur, chlorine, and phosphorus — Gravimetric method [Withdrawn: replaced with ISO 333 (now withdrawn), ISO 334, ISO 352 (now withdrawn), and ISO 622]
- ISO 927:2009 Spices and condiments — Determination of extraneous matter and foreign matter content
- ISO 928:1997 Spices and condiments — Determination of total ash
- ISO 929:1980 Spices and condiments — Determination of water-insoluble ash [Withdrawn without replacement]
- ISO 930:1997 Spices and condiments — Determination of acid-insoluble ash
- ISO 931:1980 Green bananas — Guide to storage and transport
- ISO/R 932:1969 Animal fats — Determination of insoluble impurities content [Withdrawn: replaced with ISO 663]
- ISO/R 933:1969 Animal fats — Determination of moisture and volatile matter content [Withdrawn: replaced with ISO 662]
- ISO 934:1980 Animal and vegetable fats and oils — Determination of water content — Entrainment method
- ISO 935:1988 Animal and vegetable fats and oils — Determination of titre
- ISO 936:1998 Meat and meat products — Determination of total ash
- ISO 937:1978 Meat and meat products — Determination of nitrogen content (Reference method)
- ISO 938:1975 Hand-operated stillage trucks — Principal dimensions
- ISO 939:1980 Spices and condiments — Determination of moisture content — Entrainment method
- ISO 940:1979 Spices and condiments — Determination of alcohol-soluble extract [Withdrawn without replacement]
- ISO 941:1980 Spices and condiments — Determination of cold water-soluble extract
- ISO/R 942:1969 Whiteheart malleable cast iron [Withdrawn: replaced with ISO 5922]
- ISO/R 943:1969 Blackheart malleable cast iron [Withdrawn: replaced with ISO 5922]
- ISO/R 944:1969 Pearlitic malleable cast iron [Withdrawn: replaced with ISO 5922]
- ISO 945 Microstructure of cast irons
- ISO 945-1:2019 Part 1: Graphite classification by visual analysis
- ISO/TR 945-2:2011 Part 2: Graphite classification by image analysis
- ISO/TR 945-3:2016 Part 3: Matrix structures
- ISO 945-4:2019 Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons
- ISO 946:1975 Grey cast iron — Beam unnotched impact test [Withdrawn without replacement]
- ISO/R 947:1969 Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness [Withdrawn: replaced with ISO 1106-3, later ISO 17636, now ISO 17636-1]
- ISO 948:1980 Spices and condiments — Sampling
- ISO 949:1987 Cauliflowers — Guide to cold storage and refrigerated transport
- ISO 950:1979 Cereals — Sampling (as grain) (Withdrawn: replaced by ISO 13690, later ISO 24333)
- ISO 951:1979 Pulses in bags — Sampling (Withdrawn: replaced by ISO 13690, later ISO 24333)
- ISO/R 952:1969 Light metal and light metal alloys — Tubes — Tensile Test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 953:1969 Light metal and light metal alloys — Tubes — Drift expanding test [Withdrawn: replaced with ISO 8493]
- ISO/R 954:1969 Light metal and light metal alloys — Tubes — Bend test [Withdrawn: replaced with ISO 7438]
- ISO/R 955:1969 Aluminium and aluminium alloys — Tubes — Flattening test [Withdrawn: replaced with ISO 8492]
- ISO/R 956:1969 Light metal and light metal alloys — Wires — Tensile Test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 957:1969 Aluminium and aluminium alloys — Wires — Simple torsion test [Withdrawn: replaced with ISO 7800]
- ISO/R 958:1969 Aluminium and aluminium alloys — Wires — Wrapping test [Withdrawn: replaced with ISO 7802]
- ISO 959 Pepper (Piper nigrum L.), whole or ground — Specification
- ISO 959-1:1998 Part 1: Black pepper
- ISO 959-2:1998 Part 2: White pepper
- ISO 960:1988 Plastics — Polyamides (PA) — Determination of water content [Withdrawn: replaced with ISO 15512]
- ISO/R 961:1969 Information processing — Implementation of the 6-bit and 7-bit coded character sets on 7- track 12,7 mm (0.5 in) magnetic tape [Withdrawn without replacement]
- ISO 962:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape
- ISO 963:1973 Information processing — Guide for the definition of 4- bit character sets derived from the 7- bit coded character set for information processing interchange [Withdrawn without replacement]
- ISO/R 964:1969 Shipbuilding details — Mating dimensions for pipeline flanges for ships
- ISO 965 ISO general purpose metric screw threads — Tolerances
- ISO/R 966:1969 Seeds — Sampling and methods of test [Withdrawn without replacement]
- ISO/R 967:1969 Pesticides — Common names — Ninth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 968:1969 Pesticides — Common names — Tenth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 969:1969 Pesticides — Common names — Eleventh series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 970:1969 Pesticides — Common names — Twelfth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 971:1969 Pesticides — Common names — Thirteenth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 972:1997 Chillies and capsicums, whole or ground (powdered) — Specification
- ISO 973:1999 Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground — Specification
- ISO 974:2000 Plastics — Determination of the brittleness temperature by impact
- ISO 975:2021 Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method
- ISO 976:2013 Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH
- ISO/R 977:1969 Sodium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 3195]
- ISO/R 978:1969 Sodium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 3195]
- ISO 979:1974 Sodium hydroxide for industrial use — Method of assay
- ISO 980:1976 Sodium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement]
- ISO 981:1973 Sodium hydroxide for industrial use — Determination of chloride content — Mercurimetric method
- ISO 982:1976 Sodium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 983:1974 Sodium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 984:1974 Sodium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement]
- ISO 985:1974 Sodium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement]
- ISO 986:1976 Sodium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement]
- ISO/R 987:1969 Sodium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement]
- ISO/R 988:1969 Potassium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 2466]
- ISO/R 989:1969 Potassium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 2466]
- ISO 990:1974 Potassium hydroxide for industrial use — Method of assay [Withdrawn without replacement]
- ISO 991:1976 Potassium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement]
- ISO 992:1975 Potassium hydroxide for industrial use — Determination of chlorides content — Mercurimetric method [Withdrawn without replacement]
- ISO 993:1976 Potassium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 994:1973 Potassium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 995:1975 Potassium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement]
- ISO 996:1976 Potassium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement]
- ISO 997:1976 Potassium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement]
- ISO/R 998:1969 Potassium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement]
- ISO 999:1996 Information and documentation — Guidelines for the content, organization, and presentation of indexes
- ISO 1000 – ISO 1499
- ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [Withdrawn 2009-11-17: replaced with ISO 80000-1]
- ISO/IEC 1001:2012 Information technology – File structure and labelling of magnetic tapes for information interchange
- ISO 1002:1983 Rolling bearings — Airframe bearings — Characteristics, boundary dimensions, tolerances, static load ratings
- ISO 1003:2008 Spices — Ginger (Zingiber officinale Roscoe) — Specification
- ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
- ISO 1004-1:2013 Part 1: Print specifications for E-13B
- ISO 1004-2:2013 Part 2: Print specifications for CMC7
- ISO 1005 Railway rolling stock material
- ISO 1005-1:1994 Part 1: Rough-rolled tyres for tractive and trailing stock — Technical delivery conditions
- ISO 1005-2:1986 Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock — Dimensional, balancing and assembly requirements
- ISO 1005-3:1982 Part 3: Axles for tractive and trailing stock — Quality requirements
- ISO 1005-4:1986 Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock — Quality requirements
- ISO/R 1005-5:1969 Part 5: Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Withdrawn without replacement]
- ISO 1005-6:1994 Part 6: Solid wheels for tractive and trailing stock — Technical delivery conditions
- ISO 1005-7:1982 Part 7: Wheelsets for tractive and trailing stock — Quality requirements
- ISO 1005-8:1986 Part 8: Solid wheels for tractive and trailing stock — Dimensional and balancing requirements
- ISO 1005-9:1986 Part 9: Axles for tractive and trailing stock — Dimensional requirements
- ISO 1006:1983 Building construction — Modular coordination — Basic module [Withdrawn: replaced with ISO 21723]
- ISO 1007 Photography – 135-size film and magazine – Specifications
- ISO 1008:1992 Photography — Paper dimensions — Pictorial sheets
- ISO 1009:2000 Photography — Paper dimensions — Rolls for printers
- ISO 1010:1973 Photography — Colour paper for general use — Sizes of sheet material [Withdrawn: replaced with ISO 1008]
- ISO 1011:1973 Photography — Colour paper for roll paper printers — Sizes of rolls [Withdrawn: replaced with ISO 1009]
- ISO 1012:1998 Photography — Films in sheets and rolls for general use — Dimensions
- ISO 1013:2020 Coke — Determination of bulk density in a large container
- ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity
- ISO 1015:1992 Brown coals and lignites — Determination of moisture content — Direct volumetric method [Withdrawn without replacement]
- ISO/R 1016:1969 Brown coals and lignites — Determination of ash [Withdrawn: replaced with ISO 1171]
- ISO 1017:2006 Brown coals and lignites — Determination of acetone-soluble material
- ISO 1018:2019 Hard coal — Determination of moisture-holding capacity
- ISO 1019:1982 Cinematography — Spools, daylight loading type for 16 mm motion-picture cameras — Dimensions
- ISO 1020:1974 Cinematography — Spools, daylight loading type for double-8 mm motion-picture cameras — Dimensions [Withdrawn without replacement]
- ISO 1021:1980 Aircraft — Engine nacelle fire extinguisher apertures and doors
- ISO 1022:1988 Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions (Inch series) (Not valid for new designs) [Withdrawn: replaced with ISO 8775 on 2012-04-02]
- ISO 1023:1974 Aircraft — High pressure air charging valves [Withdrawn without replacement]
- ISO 1024:1989 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-1]
- ISO 1025:1981 Textile machinery and accessories — Sectional beams for warp knitting machines — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-5]
- ISO 1026:1982 Fruit and vegetable products — Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation
- ISO 1027:1983 Radiographic image quality indicators for non-destructive testing — Principles and identification [Withdrawn: replaced with ISO 19232-(1-2)]
- ISO 1028:1973 Information processing — Flowchart symbols [Withdrawn: replaced with ISO 5807]
- ISO 1029:1974 Coniferous sawn timber — Defects — Classification
- ISO 1030:1975 Coniferous sawn timber — Defects — Measurement
- ISO 1031:1974 Coniferous sawn timber — Defects — Terms and definitions
- ISO 1032:1974 Coniferous sawn timber — Sizes — Terms and definitions [Withdrawn: replaced with ISO 24294]
- ISO 1033:1975 Aircraft — Dimensions for general purpose push-pull three-pole circuit-breakers
- ISO 1034:1973 Aircraft – Ground air-conditioning connections
- ISO 1035 Hot-rolled steel bars
- ISO 1035-1 Part 1: Dimensions of round bars
- ISO 1035-2 Part 2: Dimensions of square bars
- ISO 1035-3 Part 3: Dimensions of flat bars
- ISO 1035-4 Part 4: Tolerances
- ISO 1036:1984 Textile machinery — Dyeing and finishing machines — Definition of left and right sides
- ISO 1037:1982 Textile machinery and accessories — Beams for dyeing slivers and yarn — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-7]
- ISO/R 1038:1969 Rolling bearings — Cylindrical rolling bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
- ISO 1039:1995 Cinematography — Cores for motion-picture and magnetic film rolls — Dimensions
- ISO 1040:1983 Building construction — Modular coordination — Multimodules for horizontal coordinating dimensions [Withdrawn: replaced with ISO 21723]
- ISO 1041:1973 Essential oils — Determination of freezing point
- ISO 1042:1998 Laboratory glassware — One-mark volumetric flasks
- ISO 1043 Plastics — Symbols and abbreviated terms
- ISO 1043-1:2011 Part 1: Basic polymers and their special characteristics
- ISO 1043-2:2011 Part 2: Fillers and reinforcing materials
- ISO 1043-3:2016 Part 3: Plasticizers
- ISO 1043-4:2021 Part 4: Flame retardants
- ISO 1044:1993 Industrial trucks — Lead-acid traction batteries for electric trucks — Preferred voltages [Withdrawn without replacement]
- ISO/R 1045:1969 Straight resistance spot welding electrodes – Dimensions [Withdrawn: replaced with ISO 5184]
- ISO 1046:1973 Architectural and building drawings — Vocabulary [Withdrawn: replaced with ISO 10209-1, now ISO 10209]
- ISO 1047:1973 Architectural and building drawings — Presentation of drawings — Scales [Withdrawn without replacement]
- ISO 1048:1991 Photography — Exposed roll films — Identification [Withdrawn: replaced with ISO 732]
- ISO 1049:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating conveyors and feeders with rectangular or trapezoidal trough
- ISO 1050:1975 Continuous mechanical handling equipment for loose bulk materials — Screw conveyors
- ISO 1051:1999 Rivet shank diameters
- ISO 1052:1982 Steels for general engineering purposes [Withdrawn without replacement]
- ISO 1053:1975 Zinc — Determination of copper content — Spectrophotometric method [Withdrawn without replacement]
- ISO 1054:1975 Zinc — Determination of cadmium content — Polarographic method [Withdrawn without replacement]
- ISO 1055:1975 Zinc and zinc alloys — Determination of iron content — Spectrophotometric method [Withdrawn without replacement]
- ISO 1056:1975 Numerical control of machines — Punched tape block formats — Coding of preparatory functions G and miscellaneous functions M [Withdrawn: replaced with ISO 6983-1]
- ISO 1057:1973 Numerical control of machines — Interchangeable punched tape variable block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
- ISO 1058:1973 Numerical control of machines — Punched tape variable block for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
- ISO 1059:1973 Numerical control of machines — Punched tape fixed block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
- ISO 1060 Plastics — Homopolymer and copolymer resins of vinyl chloride
- ISO 1060-1:1998 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24024-1]
- ISO 1060-2:1998 Part 2: Preparation of test samples and determination of properties [Withdrawn: replaced with ISO 24024-2]
- ISO 1061:1990 Plastics — Unplasticized cellulose acetate — Determination of free acidity
- ISO/R 1062:1969 Pesticides — Common names — Fourteenth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 1063:1974 Surface active agents — Determination of stability in hard water
- ISO 1064:1974 Surface active agents — Determination of apparent density of pastes on filling
- ISO 1065:1991 Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents — Determination of cloud point
- ISO 1066:1975 Analysis of soaps — Determination of glycerol content — Titrimetric method
- ISO 1067:1974 Analysis of soaps — Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter
- ISO 1068:1975 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of compacted apparent bulk density
- ISO 1069:1973 Magnetic compasses and binnacles for sea navigation – Vocabulary
- ISO 1070:1992 Liquid flow measurement in open channels – Slope-area method
- ISO 1071:2015 Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron — Classification
- ISO 1072:1975 Solid wood parquet — General characteristics
- ISO 1073 Alphanumeric character sets for optical recognition
- ISO 1073-1:1976 Part 1: Character set OCR-A – Shapes and dimensions of the printed image
- ISO 1073-2:1976 Part 2: Character set OCR-B – Shapes and dimensions of the printed image
- ISO 1074:1991 Counterbalanced fork-lift trucks — Stability tests [Withdrawn: replaced with ISO 22915-2]
- ISO/R 1075:1969 Performance requirements for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO/R 1076:1969 General purpose electric cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement]
- ISO/R 1077:1969 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series – Class 1 tolerances) [Withdrawn without replacement]
- ISO/R 1078:1969 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series – Class 1 tolerances) [Withdrawn without replacement]
- ISO 1079:1989 Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-2]
- ISO 1080:1975 Machine tools — Morse taper shanks — Cotter slots with taper keys
- ISO 1081:2013 Belt drives – V-belts and V-ribbed belts, and corresponding grooved pulleys – Vocabulary
- ISO 1082:1990 Mining — Shackle type connector units for chain conveyors
- ISO 1083:2018 Spheroidal graphite cast irons — Classification
- ISO 1084:1975 Industrial tractors — Definition and nominal rating [Withdrawn without replacement]
- ISO 1085:2016 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
- ISO 1086:1991 Information and documentation – Title leaves of books
- ISO 1087:2019 Terminology work and terminology science — Vocabulary
- ISO 1088:2007 Hydrometry – Velocity-area methods using current-meters – Collection and processing of data for determination of uncertainties in flow measurement
- ISO 1089:1980 Electrode taper fits for spot welding equipment — Dimensions
- ISO 1090:1981 Office machines and data processing equipment — Function key symbols on typewriters [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 1091:1977 Typewriters — Layout of printing and function keys [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 1092
- ISO 1092-1:1974 Adding machines and calculating machines — Numeric section of ten-key keyboards [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 1093:1981 Adding machines and calculating machines — Keytop and printed or displayed symbols [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO/R 1094:1969 Adding machines and calculating machines — Classification [Withdrawn without replacement]
- ISO 1095:1989 Shipbuilding and marine structures — Toughened safety glass panes for side scuttles [Withdrawn: replaced with ISO 21005]
- ISO 1096:2021 Plywood — Classification
- ISO 1097:1975 Plywood — Measurement of dimensions of panels [Withdrawn without replacement]
- ISO 1098:1975 Veneer plywood for general use — General requirements [Withdrawn without replacement]
- ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method [Withdrawn without replacement]
- ISO 1100 Hydrometry – Measurement of liquid flow in open channels
- ISO 1100-1:1996 Part 1: Establishment and operation of a gauging station [Withdrawn: replaced with ISO 18365]
- ISO 1100-2:2010 Part 2: Determination of the stage-discharge relationship [Withdrawn: replaced with ISO 18320]
- ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
- ISO 1102:2001 Commercial road vehicles — 50 mm drawbar eye — Interchangeability
- ISO 1103:2007 Road vehicles — Coupling balls for caravans and light trailers — Dimensions
- ISO 1104:1977 Surface active agents — Technical sodium alkylarylsulphonates (excluding benzene derivatives) — Methods of analysis
- ISO/R 1105:1969 Pesticides considered not to require common names — Second list [Withdrawn: replaced with ISO 765]
- ISO 1106 Recommended practice for radiographic examination of fusion welded joints
- ISO 1106-1:1984 Part 1: Fusion welded butt joints in steel plates up to 50 mm thick [Withdrawn: replaced with ISO 17636]
- ISO 1106-2:1985 Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness [Withdrawn: replaced with ISO 17636]
- ISO 1106-3:1984 Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness [Withdrawn: replaced with ISO 17636]
- ISO 1107:2017 Fishing nets – Netting – Basic terms and definitions
- ISO 1108:1992 Spices and condiments — Determination of non-volatile ether extract
- ISO 1109:1975 Refractory products — Classification of dense shaped refractory products [Withdrawn: replaced with ISO 10081-1]
- ISO 1110:2019 Plastics — Polyamides — Accelerated conditioning of test specimens
- ISO 1111 Single cold-reduced tinplate and single cold-reduced blackplate
- ISO 1111-1:1983 Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet [Withdrawn: replaced with ISO 11949]
- ISO 1111-2:1983 Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form [Withdrawn: replaced with ISO 11949]
- ISO 1112:2009 Horology – Functional and non-functional jewels
- ISO 1113:1979 Information processing – Representation of the 7- bit coded character set on punched tape
- ISO 1114:1977 Cocoa beans — Cut test [Withdrawn: replaced with ISO 2451]
- ISO/R 1115:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Withdrawn without replacement]
- ISO 1116:1999 Micrographics — 16 mm and 35 mm microfilm spools and reels — Specifications [Withdrawn without replacement]
- ISO 1117:1975 Bonded abrasive products — Grinding-wheel dimensions (Part 2) [Withdrawn: replaced with ISO 603-(1-16)]
- ISO 1118:1978 Aluminium and aluminium alloys — Determination of titanium — Spectrophotometric chromotropic acid method
- ISO 1119:2011 Geometrical product specifications (GPS) – Series of conical tapers and taper angles
- ISO 1120:2012 Conveyor belts — Determination of strength of mechanical fastenings — Static test method
- ISO 1121:1976 Conveyor belts — List of characteristics which may be required according to use [Withdrawn without replacement]
- ISO 1122 Vocabulary of gear terms
- ISO 1122-1:1998 Part 1: Definitions related to geometry
- ISO 1122-2:1999 Part 2: Definitions related to worm gear geometry
- ISO 1123:1976 Tapered roller bearings — Inch series — Chamfer dimension limits [Withdrawn without replacement]
- ISO 1124:1988 Rubber compounding ingredients — Carbon black shipment sampling procedures
- ISO 1125:2015 Rubber compounding ingredients — Carbon black — Determination of ash
- ISO 1126:2015 Rubber compounding ingredients — Carbon black — Determination of loss on heating
- ISO 1127:1992 Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
- ISO/R 1128:1969 Steel tubes — Butt-welding bends 5D (90° and 180°) [Withdrawn: replaced with ISO 3419]
- ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers — Dimensions, tolerances and conventional masses per unit length [Withdrawn without replacement]
- ISO 1130:1975 Textile fibres — Some methods of sampling for testing
- ISO 1131:1976 Textile machinery and accessories — Weft pirns for box-loaders for automatic looms — Dimensions of pirn tip [Withdrawn without replacement]
- ISO 1132 Rolling bearings – Tolerances
- ISO 1132-1:2000 Part 1: Terms and definitions
- ISO 1132-2:2001 Part 2: Measuring and gauging principles and methods
- ISO 1133 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics
- ISO 1133-1:2011 Part 1: Standard method
- ISO 1133-2:2011 Part 2: Method for materials sensitive to time-temperature history and/or moisture
- ISO 1134:1993 Pears — Cold storage
- ISO 1135 Transfusion equipment for medical use
- ISO 1135-1:1987 Part 1: Glass transfusion bottles, closures and caps [Withdrawn without replacement]
- ISO 1135-3:2016 Part 3: Blood-taking sets for single use
- ISO 1135-4:2015 Part 4: Transfusion sets for single use, gravity feed
- ISO 1135-5:2015 Part 5: Transfusion sets for single use with pressure infusion apparatus
- ISO 1136:2015 Wool — Determination of mean diameter of fibres — Air permeability method
- ISO 1137:1975 Plastics — Determination of behaviour in a ventilated tubular oven [Withdrawn without replacement]
- ISO 1138:2007 Rubber compounding ingredients — Carbon black — Determination of sulfur content
- ISO 1139:1973 Textiles — Designation of yarns
- ISO 1140:2021 Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes
- ISO 1141:2021 Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes
- ISO 1142:1973 Ropes — Sampling and conditioning for testing [Withdrawn: replaced with ISO 2307]
- ISO 1143:2021 Metallic materials — Rotating bar bending fatigue testing
- ISO 1144:2016 Textiles — Universal system for designating linear density (Tex System)
- ISO/R 1145:1969 Refractory arch bricks — Dimensions [Withdrawn: replaced with ISO 5019-2]
- ISO 1146:1988 Pyrometric reference cones for laboratory use – Specification
- ISO 1147:1995 Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test
- ISO 1148:1980 Plastics — Aqueous dispersions of polymers and copolymers — Determination of pH [Withdrawn: replaced with ISO 976]
- ISO/R 1149:1969 Layout of multilingual classified vocabularies [Withdrawn: replaced with ISO 10241]
- ISO 1150:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines with automatic drawing-in
- ISO 1151 Flight dynamics – Concepts, quantities and symbols
- ISO 1151-1:1988 Part 1: Aircraft motion relative to the air
- ISO 1151-2:1985 Part 2: Motions of the aircraft and the atmosphere relative to the Earth
- ISO 1151-3:1989 Part 3: Derivatives of forces, moments and their coefficients
- ISO 1151-4:1994 Part 4: Concepts and quantities used in the study of aircraft stability and control
- ISO 1151-5:1987 Part 5: Quantities used in measurements
- ISO 1151-6:1982 Part 6: Aircraft geometry
- ISO 1151-7:1985 Part 7: Flight points and flight envelopes
- ISO 1151-8:1992 Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft
- ISO 1151-9:1993 Part 9: Models of atmospheric motions along the trajectory of the aircraft
- ISO 1152:1974 Flight dynamics – Concepts, quantities and symbols – Part 2: Motions of the aircraft and the atmosphere relative to the Earth [Renamed ISO 1151-2]
- ISO 1153:1972 Flight dynamics – Concepts, quantities and symbols – Part 3: Derivatives of forces, moments and their coefficients [Renamed ISO 1151-3]
- ISO 1154:1975 Information processing – Punched paper tape – Dimensions and location of feed holes and code holes
- ISO 1155:1978 Information processing – Use of longitudinal parity to detect errors in information messages
- ISO/R 1156:1969 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Withdrawn without replacement]
- ISO 1157:1990 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio [Withdrawn without replacement]
- ISO 1158:1998 Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content
- ISO 1159:1978 Plastics — Vinyl chloride-vinyl acetate copolymers — Determination of vinyl acetate [Withdrawn without replacement]
- ISO 1160:1976 Rolling bearings for railway axle-boxes — Acceptance inspection [Withdrawn without replacement]
- ISO 1161:2016 Series 1 freight containers — Corner and intermediate fittings — Specifications
- ISO 1162:1975 Cereals and pulses — Method of test for infestation by X-ray examination [Withdrawn: replaced with ISO 6639-4]
- ISO 1163 Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials
- ISO 1163-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 21306-1]
- ISO 1163-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 21306-2]
- ISO/R 1164:1970 Polyethylene (PE) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)]
- ISO/R 1165:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)]
- ISO/R 1166:1970 Polyethylene (PE) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)]
- ISO 1167 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure
- ISO 1167-1:2006 Part 1: General method
- ISO 1167-2:2006 Part 2: Preparation of pipe test pieces
- ISO 1168:1973 Combine harvesters — Width of cut and number of knife sections [Withdrawn without replacement]
- ISO 1169:2006 Zinc alloys — Determination of aluminium content — Titrimetric method
- ISO 1170:2020 Coal and coke — Calculation of analyses to different bases
- ISO 1171:2010 Solid mineral fuels — Determination of ash
- ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
- ISO 1173:2001 Assembly tools for screws and nuts — Drive ends for hand- and machine-operated screwdriver bits and connecting parts — Dimensions, torque testing
- ISO 1174 Assembly tools for screws and nuts — Driving squares
- ISO 1174-1:2011 Part 1: Driving squares for hand socket tools
- ISO 1174-2:1996 Part 2: Driving squares for power socket tools
- ISO 1175:1976 Shipbuilding — Dimensions and sectional properties of aluminium alloy sections for marine use [Withdrawn without replacement]
- ISO 1176:1990 Road vehicles – Masses – Vocabulary and codes
- ISO 1177:1985 Information processing – Character structure for start/stop and synchronous character oriented transmission
- ISO 1178:1976 Magnesium alloys — Determination of soluble zirconium — Alizarin sulphonate photometric method
- ISO 1179 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
- ISO 1179-1:2013 Part 1: Threaded ports
- ISO 1179-2:2013 Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
- ISO 1179-3:2007 Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
- ISO 1179-4:2007 Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
- ISO 1180:1983 Shanks for pneumatic tools and fitting dimensions of chuck bushings
- ISO 1181:2004 Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes
- ISO 1182:2020 Reaction to fire tests for products—Non-combustibility test
- ISO 1183 Plastics — Methods for determining the density of non-cellular plastics
- ISO 1183-1:2019 Part 1: Immersion method, liquid pycnometer method and titration method
- ISO 1183-2:2019 Part 2: Density gradient column method
- ISO 1183-3:1999 Part 3: Gas pyknometer method
- ISO 1184:1983 Plastics — Determination of tensile properties of films [Withdrawn: replaced with ISO 527-3]
- ISO 1185:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
- ISO/R 1186:1970 Pressures in brake lines and braking efficiency [Withdrawn without replacement]
- ISO 1187:1983 Special wrought copper alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 1188:1984 Cinematography — Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film — Specifications
- ISO 1189:1986 Cinematography — Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints — Specifications
- ISO 1190 Copper and copper alloys — Code of designation
- ISO 1190-1:1982 Part 1: Designation of materials
- ISO 1190-2:1982 Part 2: Designation of tempers
- ISO 1191:1975 Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number [Withdrawn: replaced with ISO 1628-3]
- ISO 1193:1973 Butter triers [Withdrawn: replaced with ISO 707]
- ISO 1194:1973 Cheese triers [Withdrawn: replaced with ISO 707]
- ISO/R 1195:1970 Plastics — Determination of the water vapour transmission rate of plastics films and thin sheets — Dish method [Withdrawn without replacement]
- ISO 1198:1972 Sealed-beam landing lamps for aircraft — Dimensions
- ISO/R 1200:1971 Cinematography — Labelling of containers for unexposed motion-picture films and magnetic films — Minimum information specifications [Withdrawn: replaced with ISO 3042]
- ISO 1201:1972 Cinematography — 8 mm motion-picture film with picture — Location and width of magnetic striping and gaps of recording and reproducing magnetic heads for magnetic sound record [Withdrawn without replacement]
- ISO 1202:1981 Essential oils — Determination of 1,8-cineole content [Withdrawn without replacement]
- ISO 1203:1998 Photography — Roll film cameras — Back window location
- ISO 1204:1990 Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
- ISO 1205:1972 Reciprocating internal combustion engines — Designation of the cylinders [Withdrawn: replaced with ISO 1204]
- ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO 1207:2011 Slotted cheese head screws — Product grade A
- ISO 1208:1982 Spices and condiments — Determination of filth
- ISO 1209 Rigid cellular plastics — Determination of flexural properties
- ISO 1209-1:2007 Part 1: Basic bending test
- ISO 1209-2:2007 Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 1210:1992 Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source [Withdrawn: replaced with IEC 60695-11-10]
- ISO 1211:2010 Milk — Determination of fat content — Gravimetric method (Reference method)
- ISO 1212:1995 Apples — Cold storage
- ISO 1213 Solid mineral fuels – Vocabulary
- ISO 1213-1:2020 Part 1: Terms relating to coal preparation
- ISO 1213-2:2016 Part 2: Terms relating to sampling, testing and analysis
- ISO/R 1213-3 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Withdrawn: replaced with ISO 1213-2]
- ISO/R 1214:1971 Counterbalanced fork lift trucks — Rated capacity [Withdrawn without replacement]
- ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging
- ISO 1216:2017 Boiled reproduction cork — Grading, classification and packing
- ISO 1217:2009 Displacement compressors—Acceptance tests
- ISO 1218:1975 Plastics — Polyamides — Determination of “melting point” [Withdrawn: replaced with ISO 3146]
- ISO 1219 Fluid power systems and components – Graphical symbols and circuit diagrams
- ISO 1219-1:2012 Part 1: Graphical symbols for conventional use and data-processing applications
- ISO 1219-2:2012 Part 2: Circuit diagrams
- ISO 1219-3:2016 Part 3: Symbol modules and connected symbols in circuit diagrams
- ISO/R 1220:1970 Methods of test for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO 1222 Photography – Tripod connections
- ISO 1223:2003 Cinematography — Picture areas for motion-picture films for television — Position and dimensions
- ISO 1224 Rolling bearings — Instrument precision bearings
- ISO 1224-1:2007 Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings [Withdrawn without replacement]
- ISO 1224-2:2007 Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings [Withdrawn without replacement]
- ISO/R 1225 was merged into ISO/R 1224.
- ISO/R 1226:1970 Symbolic designation of direction of closing and faces of doors, windows and shutters [Withdrawn without replacement]
- ISO 1227:1979 Starch, including derivatives and by-products — Vocabulary [Withdrawn without replacement]
- ISO 1228:1975 Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number [Withdrawn: replaced with ISO 1628-5]
- ISO 1229:1989 Photography — Expendable photoflash lamps — Determination of light output [Withdrawn without replacement]
- ISO 1230:2007 Photography — Determination of flash guide numbers for electronic flash equipment
- ISO/R 1231:1970 Seat belt assemblies for motorists [Withdrawn without replacement]
- ISO 1232:1976 Aluminium oxide primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method [Withdrawn without replacement]
- ISO 1233:1975 Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution [Withdrawn: replaced with ISO 1628-6]
- ISO 1234:1997 Split pins
- ISO 1237:1981 Mustard seed — Specification
- ISO 1241:1996 Essential oils — Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols
- ISO 1242:1999 Essential oils — Determination of acid value
- ISO 1247 Aluminium pigments for paints
- ISO 1247-1:2021 Part 1: General aluminium pigments
- ISO 1247-2:2021 Part 2: Vacuum metallized aluminium pigments
- ISO 1248:2006 Iron oxide pigments — Specifications and methods of test
- ISO 1249:1974 Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
- ISO 1250:1972 Mineral solvents for paints — White spirits and related hydrocarbon solvents
- ISO/R 1260:1970 Guide to the use of ISO/R 390 “Sampling and inspection of asbestos-cement products” [Withdrawn: replaced with ISO 390]
- ISO 1264:1980 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of pH of aqueous extract
- ISO 1265:2007 Plastics — Poly(vinyl chloride) resins — Determination of number of impurities and foreign particles
- ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
- ISO 1269:2006 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water)
- ISO 1270:1975 Plastics — PVC resins — Determination of ash and sulphated ash [Withdrawn: replaced with ISO 3451-5]
- ISO 1271:1983 Essential oils — Determination of carbonyl value — Free hydroxylamine method
- ISO 1272:2000 Essential oils — Determination of content of phenols
- ISO 1275:2006 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
- ISO 1279:1996 Essential oils — Determination of carbonyl value — Potentiometric methods using hydroxylammonium chloride
- ISO/TR 1281 Rolling bearings — Explanatory notes on ISO 281
- ISO/TR 1281-1:2021 Part 1: Basic dynamic load rating and basic rating life
- ISO/TR 1281-2:2008 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
- ISO/R 1283 Brown coals and lignites — Determination of ash [Draft numbered ISO 1016]
- ISO 1288:2016 Glass in building — Determination of the bending strength of glass
- ISO 1288-1:2016 Part 1: Fundamentals of testing glass
- ISO 1288-2:2016 Part 2: Coaxial double-ring test on flat specimens with large test surface areas
- ISO 1288-3:2016 Part 3: Test with specimen supported at two points (four point bending)
- ISO 1288-4:2016 Part 4: Testing of channel shaped glass
- ISO 1288-5:2016 Part 5: Coaxial double ring test on flat specimens with small test surface areas
- ISO/R 1291 Pesticides — Common names — Ninth series of terms [Draft numbered ISO/R 967]
- ISO/R 1292 Pesticides — Common names — Eleventh series of terms [Draft numbered ISO/R 969]
- ISO/R 1295:1970 Paper vocabulary — Fifth series of terms [Withdrawn: Replaced with ISO 4046]
- ISO 1302:2002 Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation [Withdrawn: Replaced with ISO 21920-1]
- ISO 1304:2016 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number
- ISO 1306:1995 Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density
- ISO 1307:2006 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
- ISO 1310:1974 Carbon black for use in the rubber industry — Sampling packaged shipments [Withdrawn: Replaced with ISO 1124]
- ISO/R 1311 Shipbuilding details — Mating dimensions for pipeline flanges for ships [Draft numbered ISO/R 964]
- ISO/R 1312 Pesticides — Common names — Twelfth series of terms [Draft numbered ISO/R 970]
- ISO/R 1313 Pesticides — Common names — Thirteenth series of terms [Draft numbered ISO/R 971]
- ISO 1324:1985 Solid wood parquet — Classification of oak strips
- ISO 1325:1973 Plastics — Determination of electrical properties of thin sheet and film [Withdrawn without replacement]
- ISO/R 1326:1970 Plastics — Determination of flammability and burning rate of plastics in the form of film [Withdrawn: Replaced with ISO 9773]
- ISO 1328 Cylindrical gears — ISO system of flank tolerance classification
- ISO 1328-1:2013 Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- ISO 1328-2:2020 Part 2: Definitions and allowable values of double flank radial composite deviations
- ISO/R 1330:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)]
- ISO/DIS 1331, 1332, and 1333 became ISO/R 1164, 1165, and 1166, respectively, meaning these numbers are unused.
- ISO 1336:1980 Wrought coppers (having minimum copper contents of 97,5 %) — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 1337:1980 Wrought coppers (having minimum copper contents of 99,85 %) — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 1338:1977 Cast copper alloys — Composition and mechanical properties [Withdrawn without replacement]
- ISO 1340:1976 Cylindrical gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement]
- ISO 1341:1976 Straight bevel gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement]
- ISO 1342:2012 Essential oil of rosemary (Rosmarinus officinalis L.)
- ISO 1346:2021 Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes
- ISO 1352:2021 Metallic materials — Torque-controlled fatigue testing
- ISO/R 1353 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Draft numbered ISO 1024]
- ISO 1355:1989 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-3]
- ISO/R 1359 Heat-treated steels, alloy steels and free-cutting steels – Part 4: Wrought, quenched, and tempered steels with 1 % chromium and 0.2 % molybdenum and controlled sulphur content [Renamed ISO/R 683-4]
- ISO/R 1360 Heat-treated steels, alloy steels and free-cutting steels – Part 5: Wrought quenched and tempered manganese steels [Draft renamed ISO/R 683-5]
- ISO 1361:1997 Light-gauge metal containers — Round open-top cans — Internal diameters
- ISO/R 1362 Heat-treated steels, alloy steels and free-cutting steels – Part 7: Wrought quenched and tempered chromium steels [Draft renamed ISO/R 683-7]
- ISO/R 1364 Heat-treated steels, alloy steels and free-cutting steels – Part 9: Wrought free-cutting steels [Draft renamed ISO/R 683-9]
- ISO/R 1366 Heat-treated steels, alloy steels and free-cutting steels – Part 11: Wrought case hardening steels [Draft renamed ISO/R 683-11]
- ISO/R 1376 Railway rolling stock material – Rough tyres for trailer stock Dimensions and tolerances [Draft renamed ISO/R 1005-2]
- ISO/R 1378 Railway rolling stock material – Rolled or forged wheel centres for tyred wheels for trailer stock [Draft renamed ISO/R 1005-4]
- ISO/R 1379 Railway rolling stock material – Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Draft renamed ISO/R 1005-5]
- ISO 1382:2020 Rubber – Vocabulary
- ISO 1385 Phthalate esters for industrial use — Methods of test
- ISO 1385-1:1977 Part 1: General
- ISO 1385-2:1977 Part 2: Measurement of colour after heat treatment (Diallyl phthalate excluded) [Withdrawn without replacement]
- ISO 1385-3:1977 Part 3: Determination of ash [Withdrawn without replacement]
- ISO 1385-4:1977 Part 4: Titrimetric method [Withdrawn without replacement]
- ISO 1385-5:1977 Part 5: Determination of ester content — Titrimetric method after saponification [Withdrawn without replacement]
- ISO 1386:1983 Solvent acetates for industrial use — Methods of test [Withdrawn without replacement]
- ISO 1387:1982 Methanol for industrial use — Methods of test [Withdrawn without replacement]
- ISO 1388 Ethanol for industrial use — Methods of test
- ISO 1388-1:1981 Part 1: General
- ISO 1388-2:1981 Part 2: Detection of alkalinity or determination of acidity to phenolphthalein
- ISO 1388-3:1981 Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method
- ISO 1388-4:1981 Part 4: Estimation of content of carbonyl compounds present in moderate amounts — Titrimetric method
- ISO 1388-5:1981 Part 5: Determination of aldehydes content — Visual colorimetric method
- ISO 1388-6:1981 Part 6: Test for miscibility with water
- ISO 1388-7:1981 Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)) — Photometric method
- ISO 1388-8:1981 Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)) — Visual colorimetric method
- ISO 1388-9:1981 Part 9: Determination of esters content — Titrimetric method after saponification
- ISO 1388-10:1981 Part 10: Estimation of hydrocarbons content — Distillation method
- ISO 1388-11:1981 Part 11: Test for detection of furfural
- ISO 1388-12:1981 Part 12: Determination of permanganate time
- ISO 1389 Phthalic anhydride for industrial use — Methods of test
- ISO 1389-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1389-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement]
- ISO 1389-3:1977 Part 3: Measurement of colour stability [Withdrawn without replacement]
- ISO 1389-4:1977 Part 4: Measurement of colour after treatment with sulphuric acid [Withdrawn without replacement]
- ISO 1389-5:1977 Part 5: Determination of free acidity — Potentiometric method [Withdrawn without replacement]
- ISO 1389-6:1977 Part 6: Determination of phthalic anhydride content — Titrimetric method [Withdrawn without replacement]
- ISO 1389-7:1977 Part 7: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement]
- ISO 1389-8:1977 Part 8: Determination of ash [Withdrawn without replacement]
- ISO 1389-9:1977 Part 9: Determination of impurities oxidizable in the cold by potassium permanganate — Iodometric method [Withdrawn without replacement]
- ISO 1389-10:1977 Part 10: Determination of 1,4- naphthaquinone content — Colorimetric method [Withdrawn without replacement]
- ISO 1389-11:1977 Part 11: Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1390 Maleic anhydride for industrial use — Methods of test
- ISO 1390-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1390-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement]
- ISO 1390-3:1977 Part 3: Determination of free acidity — Potentiometric method [Withdrawn without replacement]
- ISO 1390-4:1977 Part 4: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement]
- ISO 1390-5:1977 Part 5: Determination of ash [Withdrawn without replacement]
- ISO 1390-6:1977 Part 6: Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1391 Paraformaldehyde for industrial use — Methods of test
- ISO 1391-1:1976 Part 1: General [Withdrawn without replacement]
- ISO 1391-2:1976 Part 2: Determination of ash [Withdrawn without replacement]
- ISO 1391-3:1976 Part 3: Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1391-4:1976 Part 4: Determination of water-insoluble matter [Withdrawn without replacement]
- ISO 1392:1977 Determination of crystallizing point — General method
- ISO 1393:1977 Liquid halogenated hydrocarbons for industrial use — Determination of acidity — Titrimetric method [Withdrawn without replacement]
- ISO 1394:1977 Liquid halogenated hydrocarbons for industrial use — Determination of cloud point [Withdrawn without replacement]
- ISO 1395:1977 Short pitch transmission precision bush chains and chain wheels [Withdrawn without replacement]
- ISO 1396:1975 Vulcanized and unvulcanized compounded rubber — Determination of copper content — Zinc diethyldithiocarbamate photometric method [Withdrawn: replaced with ISO 8053]
- ISO 1397:1975 Compounded rubber — Determination of manganese content — Sodium periodate photometric method [Withdrawn: replaced with ISO 7780]
- ISO/R 1398:1970 Rubber seals — Joint rings in asbestos-cement water piping [Withdrawn: replaced with ISO 4633]
- ISO 1399:1982 Rubber, vulcanized — Determination of permeability to gases — Constant volume method [Withdrawn: replaced with ISO 2782]
- ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2]
- ISO 1401:2016 Rubber hoses for agricultural spraying
- ISO 1402:2021 Rubber and plastics hoses and hose assemblies – Hydrostatic testing
- ISO 1403:2019 Rubber hoses, textile-reinforced, for general-purpose water applications — Specification
- ISO/R 1404:1970 Industrial air hose [Withdrawn: replaced with ISO 2398]
- ISO 1407:2011 Rubber — Determination of solvent extract
- ISO 1408:1995 Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods
- ISO 1409:2020 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension
- ISO 1413:2016 Horology – Shock-resistant wrist watches
- ISO/TR 1417:1974 Automobiles — Anchorages for seat belts [Withdrawn without replacement]
- ISO 1419:2019 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
- ISO 1420:2016 Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
- ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
- ISO/R 1428:1971 Fire-refined high-conductivity tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431]
- ISO/R 1429:1971 Fire-refined tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431]
- ISO/R 1430:1971 Phosphorus-deoxidized copper — Refinery shapes [Withdrawn: replaced with ISO 431]
- ISO 1431 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking
- ISO 1431-1:2012 Part 1: Static and dynamic strain testing
- ISO 1431-2:1994 Part 2: Dynamic strain test [Withdrawn: replaced with ISO 1431-1]
- ISO 1431-3:2017 Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
- ISO 1432:2021 Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)
- ISO 1433:1995 Rubber, vulcanized — Preferred gradations of properties [Withdrawn without replacement]
- ISO 1434:2016 Natural rubber in bales — Amount of bale coating — Determination
- ISO 1435:1996 Rubber compounding ingredients — Carbon black (pelletized) — Determination of fines content
- ISO 1436:2020 Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
- ISO 1437:2017 Rubber compounding ingredients — Carbon black — Determination of sieve residue
- ISO 1438:2017 Hydrometry – Open channel flow measurement using thin-plate weirs
- ISO/R 1439 Refractory arch bricks — Dimensions [Draft numbered ISO/R 1145]
- ISO 1440 Pyrometric reference cones for laboratory use – Specification [Draft numbered ISO/R 1146]
- ISO 1442:1997 Meat and meat products — Determination of moisture content (Reference method)
- ISO 1443:1973 Meat and meat products — Determination of total fat content
- ISO 1444:1996 Meat and meat products — Determination of free fat content
- ISO 1446:2001 Green coffee — Determination of water content — Basic reference method
- ISO 1447:1978 Green coffee — Determination of moisture content (Routine method) [Withdrawn without replacement]
- ISO 1452 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U)
- ISO 1452-1:2009 Part 1: General
- ISO 1452-2:2009 Part 2: Pipes
- ISO 1452-3:2009 Part 3: Fittings
- ISO 1452-4:2009 Part 4: Valves
- ISO 1452-5:2009 Part 5: Fitness for purpose of the system
- ISO/R 1453 Adding machines and calculating machines — Numeric section of ten-key keyboards [Draft numbered ISO/R 1092]
- ISO/R 1454 Adding machines and calculating machines — Keytop and printed or displayed symbols [Draft numbered ISO/R 1093]
- ISO/R 1455:1969 Adding machines and calculating machines — Classification [Draft numbered ISO/R 1094]
- ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
- ISO 1457:1974 Metallic coatings — Electroplated coatings of copper plus nickel plus chromium on iron or steel [Withdrawn: replaced with ISO 1456]
- ISO 1458:2002 Metallic coatings — Electrodeposited coatings of nickel [Withdrawn: replaced with ISO 1456]
- ISO 1459:1973 Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles [Withdrawn: replaced with ISO 1461]
- ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area
- ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
- ISO 1462:1973 Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests — Method for the evaluation of the results [Withdrawn: replaced with ISO 10289]
- ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
- ISO 1464:2018 Aerospace — Tripod jacks — Clearance dimensions
- ISO 1465:1989 Aircraft — Liquid oxygen replenishment couplings — Mating dimensions
- ISO 1466:1973 Lever-operated manual switches for aircraft — Performance requirements
- ISO 1467:1973 General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements
- ISO/R 1468:1970 Methods of test for general purpose electrical cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement]
- ISO/R 1469:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Draft numbered ISO 1115]
- ISO 1472:1977 Textile machinery and accessories — Cylindrical tubes for draw-twisters — Dimensions and permissible run-out [Withdrawn without replacement]
- ISO 1478:1999 Tapping screws thread
- ISO 1479:2011 Hexagon head tapping screws
- ISO/R 1480:1970 Hexagon head tapping screws — Inch series [Withdrawn without replacement]
- ISO 1481:2011 Slotted pan head tapping screws
- ISO 1482:2011 Slotted countersunk (flat) head tapping screws
- ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws
- ISO/R 1488 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series – Class 1 tolerances) [Draft numbered ISO/R 1077]
- ISO/R 1489 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series – Class 1 tolerances) [Draft numbered ISO/R 1078]
- ISO/R 1490:1970 Performance requirements for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO/R 1491:1970 Methods of test for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO/R 1494 Steel tubes — Butt-welding bends 5D (90° and 180°) [Draft numbered ISO/R 1128]
- ISO 1496 Series 1 freight containers — Specification and testing
- ISO 1496-1:2013 Part 1: General cargo containers for general purposes
- ISO 1496-2:2018 Part 2: Thermal containers
- ISO 1496-3:2019 Part 3: Tank containers for liquids, gases and pressurized dry bulk
- ISO 1496-4:1991 Part 4: Non-pressurized containers for dry bulk
- ISO 1496-5:2018 Part 5: Platform and platform-based containers
- ISO 1500 – ISO 1999
- ISO 1501:2009 ISO miniature screw threads
- ISO 1502:1996 ISO general-purpose metric screw threads – Gauges and gauging
- ISO 1503:2008 Spatial orientation and direction of movement — Ergonomic requirements
- ISO 1505:1993 Textile machinery — Widths relating to dyeing and finishing machines — Definitions and range of nominal widths
- ISO 1506:1982 Textile machinery – Dyeing, finishing and allied machinery – Classification and nomenclature [Withdrawn without replacement]
- ISO/R 1508 Pesticides — Common names — Fourteenth series of terms [Draft numbered ISO/R 1062]
- ISO 1509:1973 General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements
- ISO/R 1511:1970 Protective helmets for road users [Withdrawn without replacement]
- ISO 1512:1991 Paints and varnishes — Sampling of products in liquid or paste form [Withdrawn: replaced with ISO 15528]
- ISO 1513:2010 Paints and varnishes — Examination and preparation of test samples
- ISO 1514:2016 Paints and varnishes — Standard panels for testing
- ISO 1515:1973 Paints and varnishes — Determination of volatile and non-volatile matter [Withdrawn: replaced with ISO 3251]
- ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method
- ISO 1517:1973 Paints and varnishes — Surface-drying test — Ballotini method [Withdrawn: replaced with ISO 9117-3]
- ISO 1518 Paints and varnishes — Determination of scratch resistance
- ISO 1518-1:2019 Part 1: Constant-loading method
- ISO 1518-2:2019 Part 2: Variable-loading method
- ISO 1519:2011 Paints and varnishes — Bend test (cylindrical mandrel)
- ISO 1520:2006 Paints and varnishes — Cupping test
- ISO 1521:1973 Paints and varnishes — Determination of resistance to water — Water immersion method [Withdrawn: replaced with ISO 2812-2]
- ISO 1522:2006 Paints and varnishes — Pendulum damping test
- ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
- ISO 1524:2020 Paints, varnishes and printing inks — Determination of fineness of grind
- ISO 1530:2003 Fishing nets — Description and designation of knotted netting
- ISO 1531:1973 Fishing nets – Hanging of netting – Basic terms and definitions
- ISO 1532:1973 Fishing nets – Cutting knotted netting to shape (“tapering”)
- ISO/R 1534:1970 Protective helmets for motor motorists’ set belts with retractors [Withdrawn without replacement]
- ISO 1535:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belts
- ISO 1536:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belt pulleys
- ISO 1537:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Idlers
- ISO 1538:1984 Programming languages – ALGOL 60
- ISO/IEC 1539 Information technology – Programming languages – Fortran
- ISO/IEC 1539-1:2018 Part 1: Base language
- ISO/IEC 1539-2:2000 Part 2: Varying length character strings
- ISO/IEC 1539-3:1999 Part 3: Conditional compilation [Withdrawn without replacement]
- ISO 1540:2006 Aerospace — Characteristics of aircraft electrical systems
- ISO/R 1542:1971 Nomenclature of terms used in the benzole industry- Part I [Withdrawn: replaced with ISO 1543, now withdrawn without replacement]
- ISO 1543:1981 Benzole industry — Vocabulary [Withdrawn without replacement]
- ISO 1546:1981 Procedure for milk recording for cows [Withdrawn without replacement]
- ISO 1547:1975 Aircraft — Precision fuse-links — General requirements
- ISO 1548:1976 Aircraft — Precision fuse-links — Type A
- ISO 1549:1976 Aircraft — Precision fuse-links — Type B
- ISO 1550:1973 Potassium hydroxide for industrial use — Determination of sodium content — Flame emission spectrophotometric method
- ISO/R 1551:1970 Potassium hydroxide for industrial use — Determination of sodium content — Gravimetric method using uranyl acetate and magnesium acetate [Withdrawn without replacement]
- ISO 1552:1976 Liquid chlorine for industrial use — Method of sampling (for determining only the volumetric chlorine content)
- ISO 1553:1976 Unalloyed copper containing not less than 99,90 % of copper — Determination of copper content — Electrolytic method [Withdrawn without replacement]
- ISO 1554:1976 Wrought and cast copper alloys — Determination of copper content — Electrolytic method
- ISO/R 1555:1971 Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 1556:1971 Copper and copper alloy tubes of circular section — Flattening Test [Withdrawn: replaced with ISO 8492]
- ISO 1559:1995 Dental materials — Alloys for dental amalgam [Withdrawn: replaced with ISO 24234]
- ISO 1560:1985 Dental mercury [Withdrawn: replaced with ISO 24234]
- ISO 1561:1995 Dental casting wax [Withdrawn: replaced with ISO 15854]
- ISO 1562:2004 Dentistry — Casting gold alloys [Withdrawn: replaced with ISO 22674]
- ISO 1563:1990 Dental alginate impression material [Withdrawn: replaced with ISO 21563]
- ISO 1564:1995 Dental aqueous impression materials based on agar [Withdrawn: replaced with ISO 21563]
- ISO 1565:1978 Dental silicate cement (hand mixed) [Withdrawn: replaced with ISO 9917]
- ISO 1566:1978 Dental zinc phosphate cement [Withdrawn: replaced with ISO 9917]
- ISO 1567:1999 Dentistry — Denture base polymers [Withdrawn: replaced with ISO 20795-1]
- ISO 1570:1975 Zinc and zinc alloys — Determination of tin content — Spectrophotometric method [Withdrawn without replacement]
- ISO/R 1571:1970 Shanks for pneumatic tools and fitting dimensions of chuck bushings — Part II
- ISO 1572:1980 Tea — Preparation of ground sample of known dry matter content
- ISO 1573:1980 Tea — Determination of loss in mass at 103 degrees C
- ISO 1574:1980 Tea — Determination of water extract [Withdrawn: replaced with ISO 9768]
- ISO 1575:1987 Tea — Determination of total ash
- ISO 1576:1988 Tea — Determination of water-soluble ash and water-insoluble ash
- ISO 1577:1987 Tea — Determination of acid-insoluble ash
- ISO 1578:1975 Tea — Determination of alkalinity of water-soluble ash
- ISO 1580:2011 Slotted pan head screws — Product grade A
- ISO 1585:2020 Road vehicles — Engine test code — Net power
- ISO 1586:1977 Textile machinery and accessories – Shuttles – Terms and designation in relation to the position of the shuttle eye
- ISO 1587:1975 Gypsum rock for the manufacture of binders — Specifications [Withdrawn without replacement]
- ISO/R 1588:1971 Binders based on calcium sulphate — Definitions, classification, and nomenclature [Withdrawn without replacement]
- ISO/R 1589 Rivet shank diameters [Draft numbered ISO 1051]
- ISO 1592:1977 Urea for industrial use — Determination of nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
- ISO 1593:1977 Urea for industrial use — Determination of alkalinity — Titrimetric method [Withdrawn without replacement]
- ISO 1594:1977 Urea for industrial use — Determination of ash
- ISO/R 1595:1970 Urea for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method
- ISO 1597:1994 Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield [Withdrawn without replacement]
- ISO 1598:1990 Plastics – Cellulose acetate — Determination of insoluble particles
- ISO 1599:1990 Plastics — Cellulose acetate — Determination of viscosity loss on moulding
- ISO 1600:1990 Plastics — Cellulose acetate — Determination of light absorption on moulded specimens produced using different periods of heating
- ISO 1604:1989 Belt drives — Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
- ISO 1607 Positive-displacement vacuum pumps — Measurement of performance characteristics
- ISO 1607-1:1993 Part 1: Measurement of volume rate of flow (pumping speed) [Withdrawn: replaced with ISO 21360-2]
- ISO 1607-2:1989 Part 2: Measurement of ultimate pressure [Withdrawn: replaced with ISO 21360-2]
- ISO 1608 Vapour vacuum pumps — Measurement of performance characteristics
- ISO 1608-1:1993 Part 1: Measurement of volume rate of flow (pumping speed)
- ISO 1608-2:1989 Part 2: Measurement of critical backing pressure
- ISO 1609:2020 Vacuum technology — Dimensions of non-knife edge flanges
- ISO 1614:1976 Glycerines for industrial use — Samples and test methods — General [Withdrawn without replacement]
- ISO 1615:1976 Glycerines for industrial use — Determination of alkalinity or acidity — Titrimetric method [Withdrawn without replacement]
- ISO 1616:1976 Glycerines for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
- ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium — Determination of sodium content — Flame emission spectrophotometric method [Withdrawn without replacement]
- ISO 1618:1976 Aluminium oxide primarily used for the production of aluminium — Determination of vanadium content — N-Benzoyl-N-phenylhydroxylamine photometric method [Withdrawn without replacement]
- ISO 1619:1976 Cryolite, natural and artificial — Preparation and storage of test samples
- ISO 1620:1976 Cryolite, natural and artificial — Determination of silica content — Reduced molybdosilicate spectrophotometric method
- ISO 1622 Plastics — Polystyrene (PS) moulding and extrusion materials
- ISO 1622-1:2012 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24022-1]
- ISO 1622-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24022-2]
- ISO 1624:2001 Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water
- ISO 1625:1998 Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures [Withdrawn: replaced with ISO 3251]
- ISO/R 1627:1970 Plastics — Method of test to determine the change in electrical properties of polyethylene due to the migration of plasticizers [Withdrawn without replacement]
- ISO 1628 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers
- ISO 1628-1:2021 Part 1: General principles
- ISO 1628-2:2020 Part 2: Poly(vinyl chloride) resins
- ISO 1628-3:2010 Part 3: Polyethylenes and polypropylenes
- ISO 1628-4:1999 Part 4: Polycarbonate (PC) moulding and extrusion materials
- ISO 1628-5:1998 Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
- ISO 1628-6:1990 Part 6: Methyl methacrylate polymers
- ISO 1629:2013 Rubber and latices – Nomenclature
- ISO 1634 Wrought copper and copper alloy plate, sheet and strip
- ISO 1634-1:1987 Part 1: Technical conditions of delivery for plate, sheet and strip for general purposes [Withdrawn without replacement]
- ISO 1634-2:1987 Part 2: Technical conditions of delivery for plate and sheet for boilers, pressure vessels and heat-exchangers [Withdrawn without replacement]
- ISO 1634-3:1987 Part 3: Technical conditions of delivery for wrought copper alloy strip for springs [Withdrawn without replacement]
- ISO 1635:1974 Wrought copper and copper alloys — Round tubes for general purposes — Mechanical properties [Withdrawn without replacement]
- ISO 1637:1987 Wrought copper and copper alloy rod and bar — Technical conditions of delivery [Withdrawn without replacement]
- ISO 1638:1987 Wrought copper and copper alloy wire — Technical conditions of delivery [Withdrawn without replacement]
- ISO 1639:1974 Wrought copper alloys — Extruded sections — Mechanical properties [Withdrawn without replacement]
- ISO 1640:1974 Wrought copper alloys — Forgings — Mechanical properties [Withdrawn without replacement]
- ISO 1641 End mills and slot drills
- ISO 1641-1:2016 Part 1: Milling cutters with cylindrical shanks
- ISO 1641-2:2011 Part 2: Dimensions and designation of milling cutters with Morse taper shanks
- ISO 1641-3:2011 Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
- ISO 1642:1987 Plastics — Industrial laminated sheets based on thermosetting resins — Specification [Withdrawn without replacement]
- ISO/R 1646:1970 Rolling bearings — Double row self-aligning ball bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
- ISO/R 1648:1971 Rolling bearings — Radial bearings with shields or seals — Outside diameter tolerances — Normal tolerance class and tolerance class 6 [Withdrawn: Replaced with ISO 492]
- ISO 1651:1974 Tube drawing mandrels
- ISO 1652:2011 Rubber latex — Determination of apparent viscosity by the Brookfield test method
- ISO 1653:1975 Vulcanized rubbers — Determination of compression set under constant deflection at low temperatures [Withdrawn: replaced with ISO 815, later ISO 815-(1-2)]
- ISO/R 1654:1971 Raw rubber and rubber latex — Determination of copper [Withdrawn: replaced with ISO 8053]
- ISO 1655:1975 Raw rubber and rubber latex — Determination of manganese content — Potassium periodate photometric method [Withdrawn: replaced with ISO 7780]
- ISO 1656:2019 Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
- ISO 1657:1986 Rubber, raw and rubber latex — Determination of iron content — 1,10-Phenanthroline photometric method
- ISO 1658:2015 Natural rubber (NR) — Evaluation procedure
- ISO/R 1659 Layout of multilingual classified vocabularies [Draft numbered ISO/R 1149]
- ISO 1660:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Profile tolerancing
- ISO/R 1661:1971 Technical drawings – Tolerances of form and position – Part IV: Practical examples of indications on drawings. [Withdrawn without replacement]
- ISO/R 1662:1971 Refrigerating plants — Safety requirements [Withdrawn: replaced with ISO 5149, later ISO 5149-(1-4)]
- ISO 1663:2007 Rigid cellular plastics – Determination of water vapour transmission properties
- ISO 1666:1996 Starch — Determination of moisture content — Oven-drying method
- ISO/TR 1672:1977 Hardware representation of ALGOL basic symbols in the ISO 7- bit coded character set for information processing interchange [Withdrawn without replacement]
- ISO 1673:1991 Onions — Guide to storage
- ISO 1675:1985 Plastics — Liquid resins — Determination of density by the pyknometer method
- ISO 1677:1977 Sealed radioactive sources — General [Withdrawn: replaced with ISO 2919]
- ISO 1679:1973 Data processing — Implementation of the ISO 7- bit coded character set on punched cards [Withdrawn: replaced with ISO 6586]
- ISO 1680:2013 Acoustics – Test code for the measurement of airborne noise emitted by rotating electrical machines
- ISO 1681:1973 Information processing – Unpunched paper cards – Specification
- ISO 1682:1973 Information processing — 80 columns punched paper cards — Dimensions and location of rectangular punched holes [Withdrawn without replacement]
- ISO 1683:2015 Acoustics – Preferred reference values for acoustical and vibratory levels
- ISO 1684:1975 Wire, bar and tube drawing dies — Specifications
- ISO/R 1685:1971 Shipbuilding details — Multi-purpose chocks of cast steel [Withdrawn without replacement]
- ISO 1686:1976 Sodium and potassium silicates for industrial use — Samples and methods of test — General
- ISO 1687:1976 Sodium and potassium silicates for industrial use — Determination of density at 20 degrees C of products in solution — Method using density hydrometer and method using pyknometer [Withdrawn without replacement]
- ISO 1688:1976 Sodium and potassium silicates for industrial use — Determination of dry matter — Gravimetric method [Withdrawn without replacement]
- ISO 1689:1976 Sodium and potassium silicates for industrial use — Calculation of the ratio : silicon dioxide/sodium oxide or silicon dioxide/potassium oxide
- ISO 1690:1976 Sodium and potassium silicates for industrial use — Determination of silica content — Gravimetric method by insolubilization
- ISO 1691:1976 Sodium and potassium silicates for industrial use — Determination of carbonates content — Gas-volumetric method
- ISO 1692:1976 Sodium and potassium silicates for industrial use — Determination of total alkalinity — Titrimetric method
- ISO 1693:1976 Cryolite, natural and artificial — Determination of fluorine content — Modified Willard-Winter method
- ISO 1694:1976 Cryolite, natural and artificial — Determination of iron content — 1,10- Phenanthroline photometric method
- ISO 1695:1977 o-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1696:1977 p-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1697:1977 Chlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1698:1977 o-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1699:1977 P-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1700:1988 Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions
- ISO 1701 Test conditions for milling machines with table of variable height — Testing of the accuracy
- ISO 1701-0:1984 Part 0: General introduction [Withdrawn: replaced with ISO 1701-1 and ISO 1701-2]
- ISO 1701-1:2004 Part 1: Machines with horizontal spindle
- ISO 1701-2:2004 Part 2: Machines with vertical spindle
- ISO 1703:2005 Assembly tools for screws and nuts – Designation and nomenclature
- ISO 1704:2008 Ships and marine technology — Stud-link anchor chains
- ISO/R 1707:1970 Formic acid for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn: replaced with ISO 731-6, now withdrawn without replacement]
- ISO 1708:1989 Acceptance conditions for general purpose parallel lathes — Testing of the accuracy
- ISO 1709:2018 Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing
- ISO/R 1710:1970 Fundamental principles for protection in the design and construction of installations for work on unsealed radioactive materials [Withdrawn without replacement]
- ISO 1711 Assembly tools for screws and nuts — Technical specifications
- ISO 1711-1:2019 Part 1: Hand-operated wrenches and sockets
- ISO 1711-2:2019 Part 2: Machine-operated sockets (impact)
- ISO/R 1713:1970 Restraining devices for children in motor vehicles
- ISO 1716:2018 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
- ISO 1717:1974 Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions
- ISO 1718:1991 Rock drilling equipment — Drill rods with tapered connection for percussive drilling
- ISO 1719:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208]
- ISO 1720:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 1 1/2 to 2 in (38 to 51 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208]
- ISO 1721:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
- ISO 1722:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm)
- ISO 1724:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
- ISO 1726 Road vehicles — Mechanical coupling between tractors and semi-trailers
- ISO 1726-1:2000 Part 1: Interchangeability between tractors and semi-trailers for general cargo
- ISO 1726-2:2007 Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers
- ISO 1726-3:2010 Part 3: Requirements for semi-trailer contact area to fifth wheel
- ISO/R 1727:1970 Pressures in brake lines and braking efficiency [Draft numbered ISO 1186]
- ISO 1728:2006 Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability
- ISO 1729:1973 Information processing — Unpunched paper tape — Specification [Withdrawn without replacement]
- ISO 1730:1980 Dictation equipment – Basic operating requirements
- ISO/R 1731:1971 Dictation equipment – Classification
- ISO 1736:2008 Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method)
- ISO 1737:2008 Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method)
- ISO 1738:2004 Butter — Determination of salt content
- ISO 1739:2006 Butter — Determination of the refractive index of the fat (Reference method)
- ISO 1740:2004 Milkfat products and butter — Determination of fat acidity (Reference method)
- ISO 1741:1980 Dextrose — Determination of loss in mass on drying — Vacuum oven method
- ISO 1742:1980 Glucose syrups — Determination of dry matter — Vacuum oven method
- ISO 1743:1982 Glucose syrup — Determination of dry matter content — Refractive index method
- ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems
- ISO 1746:1998 Rubber or plastics hoses and tubing — Bending tests [Withdrawn: replaced with ISO 10619-1]
- ISO 1747:1976 Rubber, vulcanized — Determination of adhesion to rigid plates in shear — Quadruple shear method [Withdrawn: replaced with ISO 1827]
- ISO/R 1748 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Draft numbered ISO/R 1156]
- ISO 1749:1973 Aircraft — Elastomeric sealing rings — Packaging and identification [Withdrawn without replacement]
- ISO 1750:1981 Pesticides and other agrochemicals – Common names
- ISO 1751:2012 Ships and marine technology — Ships’ side scuttles
- ISO 1753:1975 Cinematography — Recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162]
- ISO 1754:2010 Photography — Cameras using 35 mm film and roll film — Dimensions of picture sizes
- ISO 1755:1987 Photography — Projector slides — Dimensions
- ISO 1756:1975 Industrial trucks — Dimensions of stillages — Connection gauge
- ISO 1757:1996 Personal photographic dosemeters [Withdrawn without replacement]
- ISO 1758:1976 Direct-reading electroscope-type pocket exposure meters [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
- ISO 1759:1976 Indirect-reading capacitor-type pocket exposure meters and accessory electrometers [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
- ISO/R 1761:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using spectral analysis [Withdrawn: replaced with ISO 3891, now withdrawn without replacement]
- ISO 1762:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C
- ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
- ISO 1764:1975 Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings [Withdrawn: replaced with ISO 8543]
- ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness
- ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate
- ISO/R 1767:1971 Rubber — Determination of rebound resilience of vulcanizates [Withdrawn: replaced with ISO 4662]
- ISO 1768:1975 Glass hydrometers – Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
- ISO 1769:1975 Laboratory glassware – Pipettes – Colour coding
- ISO 1770:1981 Solid-stem general purpose thermometers [Withdrawn without replacement]
- ISO 1771:1981 Enclosed-scale general purpose thermometers [Withdrawn without replacement]
- ISO 1772:1975 Laboratory crucibles in porcelain and silica
- ISO 1773:1997 Laboratory glassware — Narrow-necked boiling flasks
- ISO 1775:1975 Porcelain laboratory apparatus — Requirements and methods of test
- ISO 1776:1985 Glass — Resistance to attack by hydrochloric acid at 100 degrees C — Flame emission or flame atomic absorption spectrometric method
- ISO 1780:1984 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model I — Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness — Dimensions and specifications
- ISO 1781:1983 Cinematography — Projector usage of 8 mm Type S motion-picture film for direct front projection
- ISO 1783:1973 Magnesium alloys — Determination of zinc — Volumetric method
- ISO 1784:1976 Aluminium alloys — Determination of zinc — EDTA titrimetric method
- ISO 1785:1983 Cinematography — Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) — Position and dimensions
- ISO/R 1786:1970 Statistics — Vocabulary and symbols — Second series [Withdrawn: replaced with ISO 3534]
- ISO 1787:1984 Cinematography — Camera usage of 8 mm Type S motion-picture film — Specifications
- ISO 1788 Specification for compostable plastics [Rejected draft]
- ISO 1789:1983 Building construction — Modular co-ordination — Storey heights and room heights for residential buildings [Withdrawn: replaced with ISO 6512, now replaced with ISO 21723]
- ISO/R 1790:1970 Building construction – Modular co-ordination – Reference lines of horizontal controlling co-ordinating dimensions [Withdrawn: replaced with ISO 2848]
- ISO 1791:1983 Building construction – Modular co-ordination – Vocabulary [Withdrawn: replaced with ISO 6707-1]
- ISO 1793:2005 Cinematography — Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) — Dimensions
- ISO/R 1794:1971 Cellular plastics and rubbers — Determination of linear dimensions [Withdrawn: replaced with ISO 1923]
- ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
- ISO 1796:1982 Rubber, raw — Sample preparation [Withdrawn: replaced with ISO 1795]
- ISO 1797:2017 Dentistry — Shanks for rotary and oscillating instruments
- ISO 1798:2008 Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
- ISO/R 1799:1971 Dimensions of elastomeric toroidal sealing rings for pipe-fittings in aircraft [Withdrawn without replacement]
- ISO/R 1800:1971 Dimensions of elastomeric toroidal sealing rings for aircraft [Withdrawn without replacement]
- ISO 1802:1992 Natural rubber latex concentrate — Determination of boric acid content
- ISO 1803:1997 Building construction – Tolerances – Expression of dimensional accuracy – Principles and terminology [Withdrawn: replaced with ISO 6707-1]
- ISO 1804:1972 Doors – Terminology [Withdrawn: replaced with ISO 22496]
- ISO 1805:2006 Fishing nets — Determination of breaking force and knot breaking force of netting yarns
- ISO 1806:2002 Fishing nets — Determination of mesh breaking force of netting
- ISO 1807:1975 Continuous mechanical handling equipment for loose bulk materials — Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal trough
- ISO 1809:1977 Textile machinery and accessories – Types of formers for yarn packages – Nomenclature
- ISO 1810:1976 Copper alloys — Determination of nickel (low contents) — Dimethylglyoxime spectrophotometric method [Withdrawn without replacement]
- ISO 1811 Copper and copper alloys — Selection and preparation of samples for chemical analysis
- ISO 1811-1:1988 Part 1: Sampling of cast unwrought products
- ISO 1811-2:1988 Part 2: Sampling of wrought products and castings
- ISO 1812:1976 Copper alloys — Determination of iron content — 1,10- Phenanthroline spectrophotometric method
- ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
- ISO 1815:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating feeders and conveyors with tubular trough
- ISO 1816:1975 Continuous mechanical handling equipment for loose bulk materials and unit loads — Belt conveyors — Basic characteristics of motorized driving pulleys
- ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
- ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2]
- ISO 1819:1977 Continuous mechanical handling equipment — Safety code — General rules
- ISO 1820:1975 Continuous mechanical handling equipment for loose bulk materials — Storage equipment : Storage bins and bunkers, silos and hoppers, bin gates — Safety code [Withdrawn: replaced with ISO 8456]
- ISO 1821:1975 Continuous mechanical handling equipment for loose bulk materials — Belt feeders and conveyors — Safety code [Withdrawn: replaced with ISO 8456]
- ISO 1822:1973 Wool — Determination of fibre length using a single-fibre length-measuring machine [Withdrawn: replaced with ISO 6989]
- ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service — Specification
- ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
- ISO 1826:1981 Rubber, vulcanized — Time-interval between vulcanization and testing — Specification [Withdrawn: replaced with ISO 471, and later ISO 23529]
- ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
- ISO 1828:2012 Health informatics – Categorial structure for terminological systems of surgical procedures
- ISO 1829:1975 Selection of tolerance zones for general purposes [Withdrawn: replaced with ISO 286-1]
- ISO 1830:2005 Paper, board and pulps — Determination of acid-soluble manganese [Withdrawn: replaced with ISO 12830]
- ISO 1831:1980 Printing specifications for optical character recognition
- ISO 1832:2017 Indexable inserts for cutting tools — Designation
- ISO 1833 Textiles — Quantitative chemical analysis
- ISO 1833-1:2020 Part 1: General principles of testing
- ISO 1833-2:2020 Part 2: Ternary fibre mixtures
- ISO 1833-3:2019 Part 3: Mixtures of acetate with certain other fibres (method using acetone)
- ISO 1833-4:2017 Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite)
- ISO 1833-5:2006 Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
- ISO 1833-6:2018 Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
- ISO 1833-7:2017 Part 7: Mixtures of polyamide with certain other fibres (method using formic acid)
- ISO 1833-8:2006 Part 8: Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
- ISO 1833-9:2019 Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol)
- ISO 1833-10:2019 Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane)
- ISO 1833-11:2017 Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid)
- ISO 1833-12:2020 Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)
- ISO 1833-13:2019 Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone)
- ISO 1833-14:2019 Part 14: Mixtures of acetate with certain other fibres (method using glacial acetic acid)
- ISO 1833-15:2019 Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content)
- ISO 1833-16:2019 Part 16: Mixtures of polypropylene fibres with certain other fibres (method using xylene)
- ISO 1833-17:2019 Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid)
- ISO 1833-18:2019 Part 18: Mixtures of silk with other protein fibres (method using sulfuric acid)
- ISO 1833-19:2006 Part 19: Mixtures of cellulose fibres and asbestos (method by heating)
- ISO 1833-20:2018 Part 20: Mixtures of elastane with certain other fibres (method using dimethylacetamide)
- ISO 1833-21:2019 Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates with certain other fibres (method using cyclohexanone)
- ISO 1833-22:2020 Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride)
- ISO 1833-24:2010 Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)
- ISO 1833-25:2020 Part 25: Mixtures of polyester with certain other fibres (method using trichloroacetic acid and chloroform)
- ISO 1833-26:2020 Part 26: Mixtures of melamine with certain other fibres (method using hot formic acid)
- ISO 1833-27:2018 Part 27: Mixtures of cellulose fibres with certain other fibres (method using aluminium sulfate)
- ISO 1833-28:2019 Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid)
- ISO 1833-29:2020 Part 29: Mixtures of polyamide with polypropylene/polyamide bicomponent (method using sulfuric acid)
- ISO 1834:1999 Short link chain for lifting purposes — General conditions of acceptance
- ISO 1835:2018 Round steel short link chains for lifting purposes — Medium tolerance sling chains — Grade 4, stainless steel
- ISO 1836:1980 Short link chain for lifting purposes — Grade M (4), calibrated, for chain hoists and other lifting appliances [Withdrawn without replacement]
- ISO 1837:2003 Lifting hooks – Nomenclature
- ISO 1838:1993 Fresh pineapples — Storage and transport
- ISO 1839:1980 Tea — Sampling
- ISO 1840:1976 Definitions of living animals for slaughter — Porcines [Withdrawn without replacement]
- ISO 1841 Meat and meat products — Determination of chloride content
- ISO 1841-1:1996 Part 1: Volhard method
- ISO 1841-2:1996 Part 2: Potentiometric method
- ISO 1842:1991 Fruit and vegetable products — Determination of pH
- ISO 1843 Higher alcohols for industrial use — Methods of test (ISO/R 1843:1970 was Higher alcohols for industrial use — measurement of colour in Hazen units)
- ISO 1843-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1843-2:1977 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement]
- ISO 1843-3:1977 Part 3: Determination of carbonyl compounds content — Potentiometric method [Withdrawn without replacement]
- ISO 1843-4:1977 Part 4: Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn without replacement]
- ISO 1843-5:1977 Part 5: Determination of total alcohols content — Titrimetric method [Withdrawn without replacement]
- ISO 1843-6:1977 Part 6: Determination of ash [Withdrawn without replacement]
- ISO 1843-7:1982 Part 7: Determination of distillation yield [Withdrawn without replacement]
- ISO 1843-8:1982 Part 8: Sulphuric acid colour test [Withdrawn without replacement]
- ISO/R 1844:1970 Higher alcohols for industrial use — Determination of density at 20 degrees C [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement]
- ISO/R 1845:1970 Higher alcohols for industrial use — Determination of distillation yield [Withdrawn: replaced with ISO 1843-7, now withdrawn without replacement]
- ISO/R 1846:1970 Higher alcohols for industrial use — Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn: replaced with ISO 1843-2, now withdrawn without replacement]
- ISO/R 1847:1970 Higher alcohols for industrial use — Determination of carbonyl compounds content — Potentiometric method [Withdrawn: replaced with ISO 1843-3, now withdrawn without replacement]
- ISO/R 1848:1970 Higher alcohols for industrial use — Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn: replaced with ISO 1843-4, now withdrawn without replacement]
- ISO/R 1849:1970 Higher alcohols for industrial use — Determination of water content by the Karl Fischer method [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement]
- ISO/R 1850:1970 Higher alcohols for industrial use — Determination of total alcohols content — Titrimetric method [Withdrawn: replaced with ISO 1843-5, now withdrawn without replacement]
- ISO/R 1851:1970 Higher alcohols for industrial use — Determination of ash [Withdrawn: replaced with ISO 1843-6, now withdrawn without replacement]
- ISO/R 1852:1970 Higher alcohols for industrial use — Sulphuric acid colour test [Withdrawn: replaced with ISO 1843-8, now withdrawn without replacement]
- ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
- ISO 1854:2008 Whey cheese — Determination of fat content — Gravimetric method (Reference method)
- ISO/R 1855:1975 Cellular rubbers – Determination of apparent density [Withdrawn: replaced with ISO 845]
- ISO 1856:2018 Flexible cellular polymeric materials — Determination of compression set
- ISO 1858:1977 Information processing – General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications
- ISO 1859:1973 Information processing – Unrecorded magnetic tapes for interchange instrumentation applications – General dimensional requirements
- ISO 1860:1986 Information processing – Precision reels for magnetic tape used in interchange instrumentation applications
- ISO 1861:1975 Information processing – 7- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement]
- ISO 1862:1975 Information processing – 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement]
- ISO/IEC 1863:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) – 32 cpmm (800 cpi)
- ISO/IEC 1864:1992 Information technology – Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange – 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1
- ISO 1865:1977 Textile machinery and accessories — Serrated bars for mechanical warp stop motions — Designations of dimensions, and dimensions of cross-section
- ISO 1866:1975 Pelletized carbon black for use in the rubber industry delivered in bulk or in bins — Specification for maximum fines content [Withdrawn without replacement]
- ISO 1867:1975 Carbon black for use in the rubber industry — Specification for sieve residue [Withdrawn without replacement]
- ISO 1868:1982 Rubber compounding ingredients — Carbon black — Specification limits for loss on heating [Withdrawn without replacement]
- ISO 1869:1977 Methylene chloride for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1870:1977 Chloroform for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1871:1979 Food and feed products — General guidelines for the determination of nitrogen by the Kjeldahl method
- ISO 1872 Plastics — Polyethylene (PE) moulding and extrusion materials
- ISO 1872-1:1993 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 17855-1]
- ISO 1872-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 17855-2]
- ISO 1873 Plastics — Polypropylene (PP) moulding and extrusion materials
- ISO 1873-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19069-1]
- ISO 1873-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19069-2]
- ISO 1874 Plastics — Polyamide (PA) moulding and extrusion materials
- ISO 1874-1:2010 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 16396-1]
- ISO 1874-2:2012 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 16396-2]
- ISO 1875:1982 Plastics — Plasticized cellulose acetate — Determination of matter extractable by diethyl ether
- ISO 1876 Swing doors — Dimensioning rules [Rejected draft][4]
- ISO 1877 Single-leaf wooden swing doors — Principal dimensions [Rejected draft][4]
- ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish [Withdrawn without replacement]
- ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method — Vocabulary [Withdrawn without replacement]
- ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of progressive profile transformation — Profile recording instruments [Withdrawn: replaced with ISO 3274]
- ISO 1881:1973 Coke not greater than 60 mm top size — Determination of mechanical strength
- ISO/R 1882 Vocabulary of terms relating to solid mineral fuels — Part 2: Terms relating to coal sampling and analysis [Draft named ISO/R 1223-2]
- ISO/R 1883 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Draft named ISO/R 1223-3]
- ISO 1886:1990 Reinforcement fibres — Sampling plans applicable to received batches [Withdrawn without replacement]
- ISO 1887:2014 Textile glass — Determination of combustible-matter content
- ISO 1888:2022 Textile glass — Staple fibres or filaments — Determination of average diameter
- ISO 1889:2009 Reinforcement yarns — Determination of linear density
- ISO 1890:2009 Reinforcement yarns — Determination of twist
- ISO 1891:2009 Fasteners – Terminology
- ISO 1891-2:2014 Part 2: Vocabulary and definitions for coatings
- ISO 1893:2007 Refractory products — Determination of refractoriness under load — Differential method with rising temperature
- ISO 1894:1979 General purpose Series 1 freight containers — Minimum internal dimensions [Withdrawn: Replaced with ISO 1496-1]
- ISO/TR 1896:1991 Products in fibre-reinforced cement — Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection [Withdrawn without replacement]
- ISO 1897:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Methods of test (ISO/R 1897 was Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water content by the Karl Fischer method)
- ISO 1897-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1897-2:1977 Part 2: Determination of water — Dean and Stark method [Withdrawn without replacement]
- ISO 1897-3:1977 Part 3: Determination of neutral oils and pyridine bases [Withdrawn without replacement]
- ISO 1897-4:1977 Part 4: Visual test for impurities insoluble in sodium hydroxide solution (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
- ISO 1897-5:1977 Part 5: Visual test for impurities insoluble in water (Phenol only) [Withdrawn without replacement]
- ISO 1897-6:1977 Part 6: Test for absence of hydrogen sulphide (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-7:1977 Part 7: Measurement of colour (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-8:1977 Part 8: Determination of o-cresol content (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-9:1977 Part 9: Determination of m-cresol content (Cresylic acid only) [Withdrawn without replacement]
- ISO 1897-10:1982 Part 10: Determination of dry residue after evaporation on a water bath (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
- ISO 1897-11:1983 Part 11: Determination of crystallizing point (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
- ISO 1897-12:1983 Part 12: Determination of distillation characteristics (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-13:1983 Part 13: Determination of residue on distillation (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO/R 1898:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water — Dean and Stark method [Withdrawn: Replaced with ISO 1897-2]
- ISO/R 1899:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of neutral oils and pyridine bases [Withdrawn: Replaced with ISO 1897-3]
- ISO/R 1900:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of dry residue after evaporation on a water bath [Withdrawn: Replaced with ISO 1897-10]
- ISO/R 1901:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-11]
- ISO/R 1902:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Visual test for impurities insoluble in sodium hydroxide solution [Withdrawn: Replaced with ISO 1897-4]
- ISO/R 1903:1971 Phenol, m-cresol, cresylic acid and xylenols for industrial use — Determination of density at 20 degrees C [Withdrawn: Replaced with ISO 1897-1]
- ISO 1904:1972 Liquefied phenol for industrial use — Determination of phenols content — Bromination method [Withdrawn without replacement]
- ISO/R 1905:1971 Liquefied phenol for industrial use — Visual test for impurities insoluble in water [Withdrawn: Replaced with ISO 1897-5]
- ISO/R 1906:1971 Cresylic acid and xylenols for industrial use — Determination of distillation characteristics [Withdrawn: Replaced with ISO 1897-12]
- ISO/R 1907:1971 Cresylic acid and xylenols for industrial use — Determination of residue on distillation [Withdrawn: Replaced with ISO 1897-13]
- ISO/R 1908:1971 Cresylic acid and xylenols for industrial use — Test for absence of hydrogen sulphide [Withdrawn: Replaced with ISO 1897-6]
- ISO/R 1909:1971 Cresylic acid and xylenols for industrial use — Measurement of colour [Withdrawn: Replaced with ISO 1897-7]
- ISO/R 1910:1971 Cresylic acid and xylenols for industrial use — Determination of o-cresol content [Withdrawn: Replaced with ISO 1897-8]
- ISO/R 1911:1971 Cresylic acid for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-9]
- ISO/R 1912:1971 Paper vocabulary — Sixth series of terms (Definition of optical properties) [Withdrawn: Replaced with ISO 4046]
- ISO/R 1913:1971 Formic acid for industrial use — Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn: replaced with ISO 731-7, now withdrawn without replacement]
- ISO 1914:1972 Boric acid for industrial use — Determination of boric acid content — Volumetric method [Withdrawn without replacement]
- ISO 1915:1972 Boric oxide for industrial use — Determination of boric oxide content — Volumetric method [Withdrawn without replacement]
- ISO 1916:1972 Disodium tetraborates for industrial use — Determination of sodium oxide and boric oxide contents and loss on ignition [Withdrawn without replacement]
- ISO 1917:1972 Hydrated sodium perborates for industrial use — Determination of sodium oxide, boric oxide and available oxygen contents — Volumetric methods [Withdrawn without replacement]
- ISO 1918:1972 Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use — Determination of sulphur compounds — Volumetric method [Withdrawn without replacement]
- ISO 1919:1998 Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
- ISO 1920 Testing of concrete
- ISO 1920-1:2004 Part 1: Sampling of fresh concrete
- ISO 1920-2:2016 Part 2: Properties of fresh concrete
- ISO 1920-3:2019 Part 3: Making and curing test specimens
- ISO 1920-4:2020 Part 4: Strength of hardened concrete
- ISO 1920-5:2018 Part 5: Density and water penetration depth
- ISO 1920-6:2019 Part 6: Sampling, preparing and testing of concrete cores
- ISO 1920-7:2004 Part 7: Non-destructive tests on hardened concrete
- ISO 1920-8:2009 Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
- ISO 1920-9:2009 Part 9: Determination of creep of concrete cylinders in compression
- ISO 1920-10:2010 Part 10: Determination of static modulus of elasticity in compression
- ISO 1920-11:2013 Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
- ISO 1920-12:2015 Part 12: Determination of the carbonation resistance of concrete — Accelerated carbonation method
- ISO 1920-13:2018 Part 13: Properties of fresh self compacting concrete
- ISO 1920-14:2019 Part 14: Setting time of concrete mixtures by resistance to penetration
- ISO 1922:2018 Rigid cellular plastics — Determination of shear properties
- ISO 1923:1981 Cellular plastics and rubbers — Determination of linear dimensions
- ISO 1924 Paper and board — Determination of tensile properties
- ISO 1924-1:1992 Part 1: Constant rate of loading method [Withdrawn without replacement]
- ISO 1924-2:2008 Part 2: Constant rate of elongation method (20 mm/min)
- ISO 1924-3:2005 Part 3: Constant rate of elongation method (100 mm/min)
- ISO 1925:2001 Mechanical vibration — Balancing — Vocabulary [Withdrawn: replaced with ISO 21940-2]
- ISO 1926:2009 Rigid cellular plastics — Determination of tensile properties
- ISO 1927 Monolithic (unshaped) refractory products
- ISO 1927-1:2012 Part 1: Introduction and classification
- ISO 1927-2:2012 Part 2: Sampling for testing
- ISO 1927-3:2012 Part 3: Characterization as received
- ISO 1927-4:2012 Part 4: Determination of consistency of castables
- ISO 1927-5:2012 Part 5: Preparation and treatment of test pieces
- ISO 1927-6:2012 Part 6: Measurement of physical properties
- ISO 1927-7:2012 Part 7: Tests on pre-formed shapes
- ISO 1927-8:2012 Part 8: Determination of complementary properties
- ISO 1928:2020 Coal and coke — Determination of gross calorific value
- ISO 1929:1993 Abrasive belts — Dimensions, tolerances and designation
- ISO 1938 Geometrical product specifications (GPS) – Dimensional measuring equipment
- ISO 1938-1:2015 Part 1: Plain limit gauges of linear size
- ISO 1938-2:2017 Part 2: Reference disk gauges
- ISO/R 1939:1970 Pneumatic cylinders – cylinder bores and port sizes [Withdrawn without replacement]
- ISO 1940 Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state
- ISO 1940-1:2003 Part 1: Specification and verification of balance tolerances [Withdrawn: replaced with ISO 21940-11]
- ISO 1940-2:1997 Part 2: Mechanical vibration — Balance quality requirements of rigid rotors — Part 2: Balance errors [Withdrawn: replaced with ISO 21940-14]
- ISO/R 1941:1970 Flat seal for hydraulic couplings [Withdrawn without replacement]
- ISO 1942:2020 Dentistry – Vocabulary
- ISO/R 1943:1970 Coupling Threads for Hydraulic or Pneumatic Piping [Withdrawn: replaced with ISO 1179-(1-4)]
- ISO/R 1944:1970 Pipe couplings for hydraulic piping (pipe threads) [Withdrawn without replacement]
- ISO 1946:1976 Textile machinery and accessories — Condenser bobbins for woollen spinning — Dimensions [Withdrawn without replacement]
- ISO 1947:1973 System of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 to 630 mm [Withdrawn without replacement]
- ISO 1948:1987 Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of auxiliaries
- ISO 1949:1987 Aircraft — Electrical connectors — Design requirements
- ISO 1950:1974 Aircraft — Identification of servicing, maintenance, ground handling and safety/hazard points [Withdrawn without replacement]
- ISO 1951:2007 Presentation/representation of entries in dictionaries – Requirements, recommendations and information
- ISO 1952:2008 Solid mineral fuels — Determination of extractable metals in dilute hydrochloric acid
- ISO 1953:2015 Hard coal — Size analysis by sieving
- ISO 1954:2013 Plywood — Tolerances on dimensions
- ISO 1955:1982 Citrus fruits and derived products — Determination of essential oils content (Reference method)
- ISO 1956 Fruits and vegetables – Morphological and structural terminology
- ISO 1956-1:1982 (No part title)
- ISO 1956-2:1989 (No part title)
- ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests
- ISO 1958:1973 Textile floor coverings — Determination of mass of total pile yarn per unit area [Withdrawn: replaced with ISO 8543]
- ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio [Withdrawn: replaced with ISO 8543]
- ISO 1963:1973 Aircraft — Interchangeability dimensions of battery connectors for automatic coupling [Withdrawn without replacement]
- ISO 1964:1987 Shipbuilding – Indication of details on the general arrangement plans of ships
- ISO 1965:1973 Aluminium terminal ends for crimping to aircraft aluminium electrical cables
- ISO 1966:1973 Crimped joints for aircraft electrical cables
- ISO 1967:1974 Aircraft — Fire-resisting electrical cables — Dimensions, conductor resistance and mass
- ISO 1968:2004 Fibre ropes and cordage – Vocabulary
- ISO 1969:2004 Fibre ropes — Polyethylene — 3- and 4-strand ropes
- ISO 1970:1973 Ropes and cordage — Eight-strand plaited manila and sisal ropes [Withdrawn without replacement]
- ISO 1971:1975 Aircraft — Accessory drives and mounting pads
- ISO 1973:2021 Textile fibres — Determination of linear density — Gravimetric method and vibroscope method
- ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method
- ISO 1975:1973 Magnesium and magnesium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex
- ISO 1976:1975 Zinc alloys — Determination of copper content — Electrolytic method [Withdrawn without replacement]
- ISO 1977:2006 Conveyor chains, attachments and sprockets
- ISO 1980:1977 Nitric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement]
- ISO 1981:1977 Nitric acid for industrial use — Determination of nitrous compounds — Titrimetric method [Withdrawn without replacement]
- ISO/R 1982:1971 Nitric acid for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1983:1977 Nitric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
- ISO 1984 Test conditions for manually controlled milling machines with table of fixed height – Testing of the accuracy
- ISO 1984-1:2001 Part 1: Machines with horizontal spindle
- ISO 1984-2:2001 Part 2: Machines with vertical spindle
- ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy
- ISO 1986 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy
- ISO 1986-1:2014 Part 1: Machines with table length of up to 1 600 mm
- ISO 1988:1975 Hard coal — Sampling [Withdrawn: replaced with ISO 18283]
- ISO/IEC 1989:2014 Information technology – Programming languages, their environments and system software interfaces – Programming language COBOL
- ISO 1990 Fruits – Nomenclature
- ISO 1990-1:1982 First list
- ISO 1990-2:1985 Second list
- ISO 1991 Vegetables – Nomenclature
- ISO 1991-1:1982 First list
- ISO 1991-2:1995 Part 2: Second list
- ISO 1992 Commercial refrigerated cabinets — Methods of test
- ISO 1992-1:1974 Part 1: Calculation of linear dimensions, areas and volumes [Withdrawn without replacement]
- ISO 1992-2:1973 Part 2: General test conditions [Withdrawn without replacement]
- ISO 1992-3:1973 Part 3: Temperature test [Withdrawn without replacement]
- ISO 1992-4:1974 Part 4: Defrosting test [Withdrawn without replacement]
- ISO 1992-5:1974 Part 5: Water vapour condensation test [Withdrawn without replacement]
- ISO 1992-6:1974 Part 6: Electrical energy consumption test [Withdrawn without replacement]
- ISO 1993 [Draft renamed ISO 1992-2]
- ISO 1994:1976 Hard coal — Determination of oxygen content [Withdrawn without replacement]
- ISO 1995:1981 Aromatic hydrocarbons — Sampling
- ISO 1996 Acoustics – Description, measurement and assessment of environmental noise
- ISO 1996-1:2016 Part 1: Basic quantities and assessment procedures[5]
- ISO 1996-2:2017 Part 2: Determination of sound pressure levels
- ISO 1997:2018 Granulated cork and cork powder — Classification, properties and packing
- ISO 1998 Petroleum industry – Terminology
- ISO 1998-1:1998 Part 1: Raw materials and products
- ISO 1998-2:1998 Part 2: Properties and tests
- ISO 1998-3:1998 Part 3: Exploration and production
- ISO 1998-4:1998 Part 4: Refining
- ISO 1998-5:1998 Part 5: Transport, storage, distribution
- ISO 1998-6:2000 Part 6: Measurement
- ISO 1998-7:1998 Part 7: Miscellaneous terms
- ISO 1998–99:2000 Part 99: General and index
- ISO 1999:2013 Acoustics – Estimation of noise-induced hearing loss
- ISO 2000:2020 Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR)
- ISO 2002:1975 Raw styrene-butadiene rubber (SBR) — Determination of organic acid content [Withdrawn: replaced with ISO 7781]
- ISO 2003:1975 Raw styrene-butadiene rubber (SBR) — Determination of soap content [Withdrawn: replaced with ISO 7781]
- ISO 2004:2017 Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications
- ISO 2005:2014 Rubber latex, natural, concentrate — Determination of sludge content
- ISO 2006 Rubber latex, synthetic — Determination of mechanical stability
- ISO 2006-1:2009 Part 1: High-speed method
- ISO 2006-1:2009 Part 2: Moderate-speed method under load
- ISO 2007:2018 Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method
- ISO 2008:1987 Rubber latex, styrene-butadiene — Determination of volatile unsaturates [Withdrawn without replacement]
- ISO 2009:2011 Slotted countersunk flat head screws — Product grade A
- ISO 2010:2011 Slotted raised countersunk head screws — Product grade A
- ISO 2011 Nuclear energy — Vocabulary — second list [draft incorporated into ISO 921][3]
- ISO 2012:1976 Textile machinery and accessories — Cone sectional warping machines — Maximum usable width
- ISO 2013:1983 Textile machinery and accessories — Beams — Method of measuring variations of form and position [Withdrawn: replaced with ISO 8116-8]
- ISO 2014:1976 Writing of calendar dates in all-numeric form [Withdrawn: replaced by ISO 8601:1988]
- ISO 2015:1976 Numbering of weeks [Withdrawn: replaced by ISO 8601:1988]
- ISO 2016:1981 Capillary solder fittings for copper tubes — Assembly dimensions and tests
- ISO 2017 Mechanical vibration and shock – Resilient mounting systems
- ISO 2017-1:2005 Part 1: Technical information to be exchanged for the application of isolation systems
- ISO 2017-2:2007 Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
- ISO 2017-3:2015 Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
- ISO 2020 Aerospace — Preformed flexible steel wire rope for aircraft controls
- ISO 2020-1:1997 Part 1: Dimensions and loads
- ISO 2020-2:1997 Part 2: Technical specification
- ISO 2021:1975 Data processing — Implementation of the ISO 8- bit coded character sets on punched cards [Withdrawn: replaced with ISO 6586]
- ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
- ISO 2023:1994 Rubber footwear — Lined industrial vulcanized-rubber boots — Specification [Withdrawn: replaced with ISO 20344]
- ISO 2024:1981 Rubber footwear, lined conducting — Specification [Withdrawn without replacement]
- ISO 2025:1972 Lined industrial rubber boots with general purpose oil resistance [Withdrawn without replacement]
- ISO 2026:2020 Aircraft — Connections for starting engines by air
- ISO 2027:1990 Natural rubber latex concentrate, evaporated, preserved — Specification
- ISO 2028:2015 Synthetic rubber latex — Preparation of dry polymer
- ISO 2030:2018 Granulated cork — Size analysis by mechanical sieving
- ISO 2031:2015 Granulated cork — Determination of apparent bulk density
- ISO 2032:1973 Heat-resisting equipment wires for aircraft
- ISO 2033:1983 Information processing – Coding of machine readable characters (MICR and OCR)
- ISO 2035:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test [Withdrawn without replacement]
- ISO 2036:1976 Wood for manufacture of wood flooring — Symbols for marking according to species
- ISO 2037:1992 Stainless steel tubes for the food industry [Withdrawn without replacement]
- ISO 2039 Plastics — Determination of hardness
- ISO 2039-1:2001 Part 1: Ball indentation method
- ISO 2039-2:1987 Part 2: Rockwell hardness
- ISO 2040:1972 Strontium chromate pigments for paints
- ISO 2041:2009 Mechanical vibration, shock and condition monitoring – Vocabulary
- ISO 2042:1973 Aircraft electrical circuit diagrams
- ISO 2043:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Oven test [Withdrawn: replaced with ISO 580]
- ISO 2044:1974 Unplasticized polyvinyl chloride (PVC) moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test
- ISO 2045:1988 Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement [Withdrawn: replaced with ISO 1452-(2,3)]
- ISO 2046:1973 Gaseous breathing oxygen supplies for aircraft
- ISO 2047:1975 Information processing – Graphical representations for the control characters of the 7- bit coded character set
- ISO 2048:1990 Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement [Withdrawn: replaced with ISO 1452-3]
- ISO 2049:1996 Petroleum products — Determination of colour (ASTM scale)
- ISO 2050:1976 Potassium chloride for industrial use — Determination of potassium content — Flame emission spectrophotometric method [Withdrawn without replacement]
- ISO 2051:1976 Potassium chloride for industrial use — Determination of potassium content — Potassium tetraphenylborate gravimetric method [Withdrawn without replacement]
- ISO 2052:1976 Potassium chloride for industrial use — Determination of potassium content — Sodium tetraphenylborate titrimetric method [Withdrawn without replacement]
- ISO 2053:1976 Potassium chloride for industrial use — Determination of moisture content — Gravimetric method [Withdrawn without replacement]
- ISO 2056:1976 Moulded polyvinyl chloride (PVC) pipes and fittings — Determination of Vicat softening temperature [Withdrawn: replaced with ISO 2507, now ISO 2507-(1-2)]
- ISO 2057:1981 Agricultural tractors — Remote control hydraulic cylinders for trailed implements
- ISO 2058:1973 Raw styrene butadiene rubber (SBR) — Determination of volatile matter [Withdrawn: replaced with ISO 248]
- ISO 2059: Concrete and reinforced concrete — notation [Rejected draft][3]
- ISO 2060:1994 Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method
- ISO 2061:2015 Textiles — Determination of twist in yarns — Direct counting method
- ISO 2062:2009 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
- ISO 2063 Thermal spraying — Zinc, aluminium and their alloys
- ISO 2063-1:2019 Part 1: Design considerations and quality requirements for corrosion protection systems
- ISO 2063-2:2017 Part 2: Execution of corrosion protection systems
- ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
- ISO 2065:1972 Textile machinery and accessories — Cylindrical tubes for tape yarns [Withdrawn: replaced with ISO 3914-3]
- ISO 2066:2004 Resilient floor coverings — Determination of moisture content of agglomerated composition cork
- ISO 2067:2019 Granulated cork, broken cork and crushed cork — Sampling for the determination of moisture content
- ISO 2068:1972 Barium chromate pigments for paints
- ISO 2069:1976 Aluminium oxide primarily used for the production of aluminium — Determination of calcium content — Flame atomic absorption method [Withdrawn without replacement]
- ISO 2070:1997 Aluminium oxide primarily used for the production of aluminium — Determination of calcium content [Withdrawn without replacement]
- ISO 2071:1976 Aluminium oxide primarily used for the production of aluminium — Determination of zinc content — Flame atomic absorption method [Withdrawn without replacement]
- ISO 2072:1981 Aluminium oxide primarily used for the production of aluminium — Determination of zinc content — PAN photometric method [Withdrawn without replacement]
- ISO 2073:1976 Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by hydrochloric acid attack under pressure [Withdrawn without replacement]
- ISO 2074:2007 Plywood – Vocabulary
- ISO 2075:1972 Cutting netting to shape — Determination of the cutting rate [Withdrawn without replacement]
- ISO 2076:2021 Textiles – Man-made fibres – Generic names
- ISO 2077:1979 Pure expanded corkboard — Determination of the modulus of rupture by bending [Withdrawn without replacement]
- ISO 2078:1993 Textile glass — Yarns — Designation
- ISO 2079:1981 Surface treatment and metallic coatings — General classification of terms [Withdrawn: replaced with ISO 2080]
- ISO 2080:2022 Metallic and other inorganic coatings – Surface treatment, metallic and other inorganic coatings – Vocabulary
- ISO 2081:2018 Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel
- ISO 2082:2017 Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel
- ISO 2083:1973 Gasoline — Determination of lead content — Volumetric chromate method [Withdrawn without replacement]
- ISO 2084:1974 Pipeline flanges for general use — Metric series — Mating dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
- ISO 2085:2018 Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
- ISO/R 2091:1971 Hydraulic cylinders — Internal diameters and piston rod diameters — Metric series [Withdrawn without replacement]
- ISO 2092:1981 Light metals and their alloys — Code of designation based on chemical symbols [Withdrawn without replacement]
- ISO 2093:1986 Electroplated coatings of tin — Specification and test methods
- ISO 2094:1999 Textile floor coverings — Determination of thickness loss under dynamic loading
- ISO 2095:1977 Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate [Withdrawn: replaced with ISO 8543]
- ISO 2096:1972 Glycerols for industrial use — Methods of sampling
- ISO 2097:1972 Glycerols for industrial use — Determination of water content — Karl Fischer method [Withdrawn without replacement]
- ISO 2098:1972 Glycerols for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement]
- ISO 2099:1972 Purified glycerol for industrial use — Determination of density at 20 degrees C [Withdrawn without replacement]
- ISO 2100:1987 Aircraft — Electrical connectors — Tests
- ISO/R 2101:1971 Aluminium and aluminium alloys — Shear test for rivet wire and rivets [Withdrawn without replacement]
- ISO 2103:1986 Loads due to use and occupancy in residential and public buildings [Withdrawn without replacement]
- ISO/R 2105:1971 Textile machinery and accessories — Tubes for draw-winders for man-made fibres [Withdrawn: replaced with ISO 3914-3]
- ISO 2106:2019 Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
- ISO 2107:2007 Aluminium and aluminium alloys — Wrought products — Temper designations
- ISO 2108:2005 Information and documentation – International standard book number (ISBN)
- ISO 2109:1975 Continuous mechanical handling equipment — Light duty belt conveyors for loose bulk materials
- ISO 2110:1989 Information technology – Data communication – 25-pole DTE/DCE interface connector and contact number assignments
- ISO 2111:1985 Data communication — Basic mode control procedures — Code independent information transfer [Withdrawn without replacement]
- ISO 2112:1990 Plastics — Aminoplastic moulding materials — Specification [Withdrawn: replaced with ISO 14527-(1-3) and ISO 14528-(1-3)]
- ISO 2113:1996 Reinforcement fibres — Woven fabrics — Basis for a specification
- ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value
- ISO 2115:1996 Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature
- ISO 2117 Terms and symbols for flight dynamics — Part 1: aircraft motion relative to the air [Draft renamed ISO 1151-1]
- ISO 2119:1972 Magnesium-zinc-zirconium alloy castings — Chemical composition [Withdrawn: replaced with ISO 3115]
- ISO 2120:1972 Liquid chlorine for industrial use — Determination of the content of chlorine by volume in the vaporized product
- ISO 2121:1972 Liquid chlorine for industrial use — Determination of water content — Gravimetric method
- ISO 2122:1972 Sodium and potassium silicates for industrial use — Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water
- ISO 2123:1972 Sodium and potassium silicates for industrial use — Determination of dynamic viscosity [Withdrawn without replacement]
- ISO 2124:1972 Sodium and potassium silicates for industrial use — Determination of silica content — Titrimetric method [Withdrawn without replacement]
- ISO 2125:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating feeders and conveyors, shaking or reciprocating feeders and oscillating conveyors — Safety code [Withdrawn: replaced with ISO 8456]
- ISO 2126:1975 Office machines — Basic arrangement for the alphanumeric section of keyboards operated with both hands [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 2128:2010 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope
- ISO 2131:1972 Surface active agents — Simplified classification
- ISO 2132:1972 Offset duplicators — Attachment features of plates [Withdrawn without replacement]
- ISO 2133:1976 Stencils for duplicators — Minimum overprint and attachment features [Withdrawn without replacement]
- ISO 2135:2017 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
- ISO/TR 2136:1977 Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties [Withdrawn: replaced with ISO 6361-2]
- ISO 2137:2020 Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum [Withdrawn without replacement]
- ISO 2139:1975 Continuous mechanical handling equipment for loose bulk materials — Oscillating conveyors and shaking or reciprocating feeders with tubular trough
- ISO 2140:1975 Continuous mechanical handling equipment for loose bulk materials — Apron conveyors
- ISO 2141:1972 Lifting hooks — General characteristics [Withdrawn without replacement]
- ISO 2142:1981 Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing
- ISO 2143:2017 Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
- ISO 2144:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 900 °C
- ISO 2145:1978 Documentation – Numbering of divisions and subdivisions in written documents
- ISO 2146:2010 Information and documentation – Registry services for libraries and related organizations
- ISO/R 2147:1971 Aluminium alloys — Sand cast test pieces — Mechanical properties [Withdrawn: replaced with ISO 3522]
- ISO 2148:1974 Continuous handling equipment – Nomenclature
- ISO 2149:1975 Continuous mechanical handling equipment for unit loads — Overhead monorail chain conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2150:1975 Continuous mechanical handling equipment for unit loads — Overhead twin rail chain conveyors (power and free) — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2151:2004 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2)
- ISO 2155:1974 Aircraft — Fire-resisting electrical cables — Performance requirements
- ISO 2156:1974 Aircraft — Fire-resisting electrical cables — Methods of test
- ISO 2157:2016 Dentistry — Nominal diameters and designation code numbers for rotary instruments
- ISO 2160:1998 Petroleum products — Corrosiveness to copper — Copper strip test
- ISO 2161 UNJ threads for Aerospace-Inch Series [Rejected draft][4]
- ISO 2162 Technical product documentation – Springs
- ISO 2162-1:1993 Part 1: Simplified representation
- ISO 2162-2:1993 Part 2: Presentation of data for cylindrical helical compression springs
- ISO 2162-3:1993 Part 3: Vocabulary [Withdrawn: replaced with ISO 26909]
- ISO 2163:1975 Industrial trucks — Wheels and castors — Vocabulary [Withdrawn: replaced with ISO 22877]
- ISO 2164:1975 Pulses — Determination of glycosidic hydrocyanic acid
- ISO 2165:1974 Ware potatoes — Guide to storage
- ISO 2166:1981 Carrots — Guide to storage
- ISO 2167:1991 Round-headed cabbage — Guide to cold storage and refrigerated transport
- ISO 2168:1974 Table grapes — Guide to cold storage
- ISO 2169:1981 Fruits and vegetables — Physical conditions in cold stores — Definitions and measurement
- ISO 2170:1980 Cereals and pulses — Sampling of milled products [Withdrawn: replaced with ISO 13690, later ISO 24333]
- ISO 2171:2007 Cereals, pulses and by-products – Determination of ash yield by incineration
- ISO 2172:1983 Fruit juice — Determination of soluble solids content — Pycnometric method
- ISO 2173:2003 Fruit and vegetable products — Determination of soluble solids — Refractometric method
- ISO 2174:1990 Surface active agents — Preparation of water with known calcium hardness
- ISO 2175:1981 Industrial wheels for non-powered equipment — Dimensions and nominal load capacities [Withdrawn: replaced with ISO 22883 and ISO 22884]
- ISO 2176:1995 Petroleum products — Lubricating grease — Determination of dropping point
- ISO 2177:2003 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
- ISO 2178:2016 Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
- ISO 2179:1986 Electroplated coatings of tin-nickel alloy — Specification and test methods
- ISO 2182 Tests for colour fastness of textiles – Sixth series [Draft renamed ISO/R 105-6]
- ISO 2184 Industrial castors — Dimensions of top plates
- ISO 2184-1:1972 Part 1: Oblong top-plates with 4 bolt holes [Withdrawn: replaced with ISO 22883 and ISO 22884]
- ISO 2185:1972 Muscovite mica blocks, thins and films — Visual classification [Withdrawn without replacement]
- ISO 2186:2007 Fluid flow in closed conduits – Connections for pressure signal transmissions between primary and secondary elements
- ISO 2187:1990 Spinning preparatory machinery, spinning and doubling (twisting) machinery – List of equivalent terms
- ISO 2189:1986 Expanded pure agglomerated cork — Determination of bulk density [Withdrawn without replacement]
- ISO 2190:2016 Granulated cork — Determination of moisture content
- ISO 2191:1972 Cork — Expanded pure agglomerated — Deformation under constant pressure [Withdrawn without replacement]
- ISO 2192:1984 Petroleum products — Determination of total sulfur content — Lamp method [Withdrawn without replacement]
- ISO 2194:1991 Industrial screens — Woven wire cloth, perforated plate and electroformed sheet — Designation and nominal sizes of openings
- ISO 2195:1972 Data interchange on rolled-up punched paper tape — General requirements [Withdrawn without replacement]
- ISO 2196:1975 Continuous mechanical handling equipment for unit loads — Single strand floor mounted truck conveyors (chain above floor) — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2197:1972 Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample
- ISO 2198:1972 Sodium hydrogen carbonate for industrial use — Determination of sodium carbonate — Titrimetric method [Withdrawn without replacement]
- ISO 2199:1972 Sodium hydrogen carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method
- ISO 2200:1972 Sodium hydrogen carbonate for industrial use — Determination of moisture content — Gravimetric method [Withdrawn without replacement]
- ISO 2201:1972 Sodium hydrogen carbonate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
- ISO 2202:1972 Liquid chlorine for industrial use — Determination of water content using an electrolytic analyser [Withdrawn without replacement]
- ISO 2203:1973 Technical drawings – Conventional representation of gears
- ISO 2204:1979 Acoustics — Guide to International Standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings [Withdrawn without replacement]
- ISO 2205:1975 Textile machinery and accessories – Drafting arrangements for spinning machines – Terminology
- ISO 2206:1987 Packaging — Complete, filled transport packages — Identification of parts when testing
- ISO 2207:1980 Petroleum waxes — Determination of congealing point
- ISO 2208:1973 Phenol, o-cresol, m-cresol and p-cresol for industrial use — Determination of crystallizing point after drying with a molecular sieve [Withdrawn without replacement]
- ISO 2209:1973 Liquid halogenated hydrocarbons for industrial use — Sampling
- ISO 2210:1972 Liquid halogenated hydrocarbons for industrial use — Determination of residue on evaporation [Withdrawn without replacement]
- ISO 2211:1973 Liquid chemical products — Measurement of colour in Hazen units (platinum-cobalt scale)
- ISO 2212:1972 Trichloroethylene for industrial use — Methods of test [Withdrawn without replacement]
- ISO 2213:1972 Perchloroethylene for industrial use — Methods of test [Withdrawn without replacement]
- ISO 2214:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use — Determination of manganese content — Formaldehyde oxime photometric method [Withdrawn without replacement]
- ISO 2215:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use — Determination of copper content — Zinc dibenzyldithiocarbamate photometric method [Withdrawn without replacement]
- ISO 2216:1972 Crude sodium borates for industrial use — Determination of sodium oxide and boric oxide contents — Volumetric method [Withdrawn without replacement]
- ISO 2217:1972 Crude sodium borates for industrial use — Determination of matter insoluble in alkaline medium and preparation of test solutions [Withdrawn without replacement]
- ISO 2218:1972 Crude sodium borates for industrial use — Determination of loss in mass after heating at 900 degrees C [Withdrawn without replacement]
- ISO 2219:2010 Thermal insulation products for buildings — Factory-made products of expanded cork (ICB) — Specification
- ISO 2220:1972 Hand finishing sticks and oil stones — Dimensions [Withdrawn: replaced with ISO 603-(1-16)]
- ISO 2221:1972 Formaldehyde solutions for industrial use — Limit test for inorganic chlorides [Withdrawn without replacement]
- ISO 2222:1972 Formaldehyde solutions for industrial use — Limit test for inorganic sulphates [Withdrawn without replacement]
- ISO 2223:1972 Formaldehyde solutions for industrial use — Limit test for heavy metals (excluding iron) [Withdrawn without replacement]
- ISO 2224:1972 Formaldehyde solutions for industrial use — Determination of ash [Withdrawn without replacement]
- ISO 2225:1972 Formaldehyde solutions for industrial use — Determination of acidity [Withdrawn without replacement]
- ISO 2226:1972 Formaldehyde solutions for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 2227:1972 Formaldehyde solutions for industrial use — Determination of formaldehyde content
- ISO 2228:1972 Formaldehyde solutions for industrial use — Determination of methanol content
- ISO 2229:1973 Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
- ISO 2230:2002 Rubber products — Guidelines for storage
- ISO 2231:1989 Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing
- ISO 2232:1990 Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications
- ISO 2233:2000 Packaging — Complete, filled transport packages and unit loads — Conditioning for testing
- ISO 2234:2000 Packaging — Complete, filled transport packages and unit loads — Stacking tests using a static load
- ISO 2235:1993 Abrasive sheets — Dimensions, tolerances and designation [Withdrawn: replaced with ISO 21948]
- ISO 2236:1991 Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
- ISO 2238:2018 Machine bridge reamers
- ISO 2239:1972 Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of daylight [Withdrawn: replaced with ISO 7589]
- ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
- ISO 2241:1972 Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of tungsten illumination [Withdrawn: replaced with ISO 7589]
- ISO 2242:1972 Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of photoflood illumination [Withdrawn: replaced with ISO 7589]
- ISO/R 2243:1972 Photography — Illumination conditions for viewing colour transparencies and their reproductions [Withdrawn: replaced with ISO 3664]
- ISO 2244:2000 Packaging — Complete, filled transport packages and unit loads — Horizontal impact tests
- ISO 2245:2006 Shaped insulating refractory products — Classification
- ISO 2246:1972 Dense shaped refractory products — Nomenclature of manufacturing processes [Withdrawn without replacement]
- ISO 2247:2000 Packaging — Complete, filled transport packages and unit loads — Vibration tests at fixed low frequency
- ISO 2248:1985 Packaging — Complete, filled transport packages — Vertical impact test by dropping
- ISO 2249:1973 Acoustics — Description and measurement of physical properties of sonic booms
- ISO 2250:2017 Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
- ISO 2251:1991 Lined antistatic rubber footwear — Specification [Withdrawn without replacement]
- ISO 2252:1983 Rubber footwear, lined industrial, for use at low temperatures [Withdrawn without replacement]
- ISO 2253:1999 Curry powder — Specification
- ISO 2254:2004 Cloves, whole and ground (powdered) — Specification
- ISO 2255:1996 Coriander (Coriandrum sativum L.), whole or ground (powdered) — Specification
- ISO 2256:1984 Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) — Specification
- ISO 2257:1980 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools
- ISO 2258:1976 Printing ribbons – Minimum markings to appear on containers
- ISO 2259:1972 Pots for propagation and transplantation made of peat and other plant material — Sampling [Withdrawn without replacement]
- ISO 2261:1994 Reciprocating internal combustion engines — Hand-operated control devices — Standard direction of motion
- ISO 2262:1984 General purpose thimbles for use with steel wire ropes — Specification
- ISO 2264:1972 Rolling bearings — Bearings with spherical outside surface and extended inner ring width [Withdrawn: replaced with ISO 9628]
- ISO/R 2265:1972 Rolling bearings with locating snap ring — Dimensions [Withdrawn: replaced with ISO 464]
- ISO 2266:1974 Textile machinery and accessories — Metal travellers for spinning and twisting [Withdrawn: replaced with ISO 96-(1-2)]
- ISO 2267:1986 Surface active agents — Evaluation of certain effects of laundering — Methods of preparation and use of unsoiled cotton control cloth
- ISO 2268:1972 Surface active agents (non-ionic) — Determination of polyethylene glycols and non-ionic active matter (adducts) — Weibull method
- ISO 2269:2000 Shipbuilding — Class A magnetic compasses, azimuth reading devices and binnacles — Tests and certification [Withdrawn: replaced with ISO 25862]
- ISO 2270:1989 Non-ionic surface active agents — Polyethoxylated derivatives — Iodometric determination of oxyethylene groups
- ISO 2271:1989 Surface active agents — Detergents — Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
- ISO 2272:1989 Surface active agents — Soaps — Determination of low contents of free glycerol by molecular absorption spectrometry
- ISO 2276:1972 Reciprocating internal combustion engines — Definition of right-hand and left-hand single bank engines [Withdrawn: replaced with ISO 1204]
- ISO 2277:1973 Static invertors for aircraft
- ISO 2281:1990 Horology – Water-resistant watches [Withdrawn: replaced with ISO 22810:2010]
- ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps
- ISO 2284:2017 Hand taps for parallel and taper pipe threads — General dimensions and marking
- ISO 2285:2019 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
- ISO 2286 Rubber- or plastics-coated fabrics — Determination of roll characteristics
- ISO 2286-1:2016 Part 1: Methods for determination of length, width and net mass
- ISO 2286-2:2016 Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
- ISO 2286-3:2016 Part 3: Method for determination of thickness
- ISO 2288:1997 Agricultural tractors and machines — Engine test code — Net power [Withdrawn without replacement]
- ISO 2289:1972 Rotary drilling equipment — Kellys [Withdrawn without replacement]
- ISO 2290:1972 Rotary drilling equipment — Upper and lower Kelly cocks [Withdrawn without replacement]
- ISO 2291:1980 Cocoa beans — Determination of moisture content (Routine method) [Withdrawn: replaced with ISO 2451]
- ISO 2292:2017 Cocoa beans — Sampling
- ISO 2293:1988 Meat and meat products — Enumeration of micro-organisms — Colony count technique at 30 degrees C (Reference method) [Withdrawn without replacement]
- ISO 2294:1974 Meat and meat products — Determination of total phosphorus content (Reference method) [Withdrawn: replaced with ISO 23776]
- ISO 2295:1974 Avocados — Guide for storage and transport
- ISO 2296:2018 Metal slitting saws with fine and coarse teeth — Metric series
- ISO 2297:1973 Chemical analysis of aluminium and its alloys — Complexometric determination of magnesium
- ISO/R 2298:1972 Alluminium and its alloys — Determination of chromium — Spectrophotometric method using diphenylcarbazide [Withdrawn without replacement]
- ISO 2299:1973 Sawn timber of broadleaved species — Defects — Classification
- ISO 2300 – ISO 2499
- [edit]
- ISO 2300:1973 Sawn timber of broadleaved species — Defects — Terms and definitions
- ISO 2301:1973 Sawn timber of broadleaved species — Defects — Measurement
- ISO 2302:2020 Isobutene-isoprene rubber (IIR) — Evaluation procedure
- ISO 2303:2019 Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedures
- ISO 2306:1972 Drills for use prior to tapping screw threads
- ISO 2307:2019 Fibre ropes — Determination of certain physical and mechanical properties
- ISO 2308:1972 Hooks for lifting freight containers of up to 30 tonnes capacity — Basic requirements
- ISO 2309:1980 Coke — Sampling [Withdrawn: replaced with ISO 18283]
- ISO 2311:1972 Electrolytic cathode copper [Withdrawn: replaced with ISO 431]
- ISO 2312:1972 Carbon tetrachloride for industrial use — Methods of test [Withdrawn without replacement]
- ISO 2313 Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery
- ISO 2313-1:2021 Part 1: Method of the horizontally folded specimen
- ISO 2313-2:2021 Part 2: Method of the vertically folded specimen
- ISO 2314:2009 Gas turbines — Acceptance tests
- ISO 2315:1980 Aircraft — Two- and four-pole sealed electromagnetic relays, 2 A and 3 A — Clearance and fixing dimensions
- ISO 2316:1973 Rolling bearings — Metric tapered roller bearings — Bearing width and cup width [Withdrawn: replaced with ISO 355]
- ISO 2318 Measurement of carbon variation in threads of hardened and tempered bolts, screws, and studs [Rejected draft]
- ISO 2320:2015 Fasteners — Prevailing torque steel nuts — Functional properties
- ISO 2321:2017 Rubber threads — Methods of test
- ISO 2322:2014 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
- ISO 2324:1972 End mills and slot drills — Milling cutters with 7/24 taper shanks [Withdrawn: replaced with ISO 1641-3]
- ISO 2325:1986 Coke — Size analysis (Nominal top size 20 mm or less) [Withdrawn: replaced with ISO 728]
- ISO 2326:1972 Continuous mechanical handling equipment for loose bulk materials — Aeroslides
- ISO 2327:1972 Pneumatic handling appliances for loose bulk materials — Piping
- ISO 2328:2011 Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions
- ISO 2329:1983 Fork-lift trucks — Fork arms — Dimensions [Withdrawn without replacement]
- ISO 2330:2002 Fork-lift trucks — Fork arms — Technical characteristics and testing
- ISO 2331:1974 Fork lift trucks – Hook-on type fork arms – Vocabulary
- ISO 2332:2009 Agricultural tractors and machinery — Connection of implements via three-point linkage — Clearance zone around implement
- ISO 2333:1972 Shipbuilding — Cargo gear particulars book [Withdrawn without replacement]
- ISO 2335 Commercial refrigerated cabinets — Methods of test — Temperature Test [Draft renamed ISO 1992-3]
- ISO 2336:1980 Hand and machine hacksaw blades — Dimensions for lengths up to 450 mm and pitches up to 6,3 mm [Withdrawn without replacement]
- ISO 2337 [Draft merged into ISO 370]
- ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel
- ISO 2339:1986 Taper pins, unhardened
- ISO 2340:1986 Clevis pins without head
- ISO 2341:1986 Clevis pins with head
- ISO 2342:2003 Slotted headless screws with shank
- ISO 2343:1972 Hexagon socket set screws — Metric series [Withdrawn: replaced with ISO 4026, ISO 4027, ISO 4028, and ISO 4029]
- ISO 2344:1998 Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housings [Withdrawn without replacement]
- ISO 2345:1994 Road vehicles — M18 x 1,5 spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
- ISO 2346:2001 Road vehicles — M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing [Withdrawn without replacement]
- ISO 2347:1994 Road vehicles — M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
- ISO 2349:1973 Rolling bearings — Tapered rolling bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class) [Withdrawn: Replaced with ISO 492 and ISO 578 (now withdrawn)]
- ISO 2351 Assembly tools for screws and nuts — Machine-operated screwdriver bits
- ISO 2351-1:2007 Part 1: Screwdriver bits for slotted head screws
- ISO 2351-2:2002 Part 2: Screwdriver bits for cross-recessed head screws
- ISO 2352:2000 Assembly tools for screws and nuts — Spiral ratchet screwdriver ends — Dimensions [Withdrawn without replacement]
- ISO 2353:1972 Magnesium and its alloys — Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver — Periodate photometric method
- ISO 2354:1976 Magnesium alloys — Determination of insoluble zirconium — Alizarin sulphonate photometric method
- ISO 2355:1972 Chemical analysis of magnesium and its alloys — Determination of rare earths — Gravimetric method
- ISO 2358:1972 Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series [Withdrawn: replaced with ISO 7040, ISO 7041, ISO 7042, ISO 7043, and ISO 7044]
- ISO 2359:1972 Prevailing torque-type steel hexagon locknuts — Dimensions — Inch series [Withdrawn without replacement]
- ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method
- ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
- ISO 2362:1972 Aluminium fluoride for industrial use — Determination of fluorine content — Modified Willard-Winter method [Withdrawn without replacement]
- ISO 2363:1972 Sulphuric acid and oleums for industrial use — Determination of oxides of nitrogen — 2,4- Xylenol spectrophotometric method [Withdrawn without replacement]
- ISO 2364:1972 Ammonium nitrate for industrial use — Determination of free acidity — Volumetric method [Withdrawn without replacement]
- ISO 2365:1972 Ammonium nitrate for industrial use — Measurement of pH value — Potentiometric method [Withdrawn without replacement]
- ISO 2366:1974 Cryolite, natural and artificial — Determination of sodium content — Flame emission and atomic absorption spectrophotometric methods
- ISO 2367:1972 Cryolite, natural and artificial — Determination of aluminium content — 8- Hydroxyquinoline gravimetric method
- ISO 2368:1972 Aluminium fluoride for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 2369:1972 Aluminium fluoride for industrial use — Determination of silica content — Spectrophotometric method using the reduced silicomolybdic complex [Withdrawn without replacement]
- ISO 2370:2019 Textiles — Determination of fineness of flax fibres — Permeametric methods
- ISO 2371:1974 Field balancing equipment — Description and evaluation [Withdrawn without replacement]
- ISO 2372:1974 Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards [Withdrawn: replaced with ISO 10816-1]
- ISO 2373:1987 Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity [Withdrawn without replacement]
- ISO 2374:1983 Lifting appliances — Range of maximum capacities for basic models
- ISO/IEC 2375:2003 Information technology – Procedure for registration of escape sequences and coded character sets
- ISO 2376:2019 Anodizing of aluminium and its alloys — Determination of breakdown voltage and withstand voltage
- ISO 2377:1972 Magnesium alloy sand castings — Reference test bar [Withdrawn without replacement]
- ISO 2378:1972 Aluminium alloy chill castings — Reference test bar [Withdrawn without replacement]
- ISO 2379:1972 Aluminium alloy sand castings — Reference test bar [Withdrawn without replacement]
- ISO 2380:1979 Screwdriver blades for slotted head screws [Withdrawn without replacement]
- ISO 2381:1972 Continuous mechanical handling equipment for unit loads — Single strand floor truck conveyors (chain below floor) — Safety code [Withdrawn: replaced with ISO 7149]
- ISO/IEC 2382:2015 Information technology – Vocabulary
- ISO/IEC 2382-36:2019 Part 36: Learning, education and training
- ISO/IEC 2382-37:2017 Part 37: Biometrics
- ISO 2383 Data processing — Vocabulary — Part 04: Organization of data [Draft merged into ISO 2382]
- ISO 2384:1977 Documentation – Presentation of translations
- ISO 2385:2020 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Sampling to determine moisture content
- ISO 2386:2019 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Determination of moisture content
- ISO 2387:1972 Continuous mechanical handling equipment for loose bulk materials — Mobile belt conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2388:1972 Continuous mechanical handling equipment for unit loads — Mobile belt conveyors (canvas, rubber, plastic, etc.) — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2389:1972 Continuous mechanical handling equipment for loose bulk materials — Picking table conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2390:1972 Continuous mechanical handling equipment for loose bulk materials — Apron conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2391:1972 Continuous mechanical handling equipment for loose bulk materials — Scraper conveyors and “en masse” conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2392:1972 Continuous mechanical handling equipment for loose bulk materials — Hydraulic conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
- ISO 2394:2015 General principles on reliability for structures
- ISO 2395:1990 Test sieves and test sieving – Vocabulary
- ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air — Specification
- ISO 2400:2012 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
- ISO 2401:2018 Welding consumables — Covered electrodes — Determination of the efficiency, metal recovery and deposition coefficient
- ISO 2402:1972 Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
- ISO 2403:2021 Textiles — Cotton fibres — Determination of micronaire value
- ISO 2404:1986 Cinematography — Six-track magnetic sound records on 70 mm striped release prints — Locations and dimensions
- ISO 2405:1972 Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick [Withdrawn: replaced with ISO 1106-2]
- ISO 2406:1974 Continuous mechanical handling equipment — Mobile and portable conveyors — Constructional specifications
- ISO 2407:1997 Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy
- ISO 2408:2017 Steel wire ropes — Requirements
- ISO 2409:2020 Paints and varnishes — Cross-cut test
- ISO 2410:1973 Household refrigerators — Methods of test for the information of the consumer [Withdrawn without replacement]
- ISO 2411:2017 Rubber- or plastics-coated fabrics — Determination of coating adhesion
- ISO 2412:1982 Shipbuilding — Colours of indicator lights
- ISO 2415:2004 Forged shackles for general lifting purposes — Dee shackles and bow shackles
- ISO 2416:1992 Passenger cars — Mass distribution
- ISO 2417:2016 Leather — Physical and mechanical tests — Determination of the static absorption of water
- ISO 2418:2017 Leather — Chemical, physical and mechanical and fastness tests — Sampling location
- ISO 2419:2012 Leather — Physical and mechanical tests — Sample preparation and conditioning
- ISO 2420:2017 Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area
- ISO 2421:2003 Coated abrasives — Cylindrical sleeves
- ISO 2422:1986 Truncated cone abrasive sleeves — Dimensions and designation [Withdrawn without replacement]
- ISO 2423:1982 Acceptance conditions for radial drilling machines with the arm adjustable in height — Testing of accuracy
- ISO 2424:2007 Textile floor coverings — Vocabulary
- ISO 2425:2010 Hydrometry – Measurement of liquid flow in open channels under tidal conditions
- ISO 2426 Plywood — Classification by surface appearance
- ISO 2426-1:2020 Part 1: General
- ISO 2426-2:2020 Part 2: Hardwood
- ISO 2426-3:2020 Part 3: Softwood
- ISO 2426-4:2020 Part 4: Palm-plywood
- ISO 2427:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of beech [Withdrawn: replaced with ISO 2426-(2-3)]
- ISO 2428:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of birch [Withdrawn: replaced with ISO 2426-(2-3)]
- ISO 2429:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of broadleaved species of tropical Africa [Withdrawn: replaced with ISO 2426-(2-3)]
- ISO 2430:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of poplar [Withdrawn: replaced with ISO 2426-(2-3)]
- ISO 2431:2019 Paints and varnishes — Determination of flow time by use of flow cups
- ISO 2433:1999 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of accuracy
- ISO 2434:1973 Compressed non-breathing air for use in aircraft
- ISO 2435:1973 Nitrogen for use in aircraft
- ISO 2436:1973 Heat-resisting equipment wires for aircraft — Methods of test
- ISO 2437:1972 Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick [Withdrawn without replacement]
- ISO 2438:1981 Rubber latex, synthetic — Codification [Withdrawn without replacement]
- ISO 2439:2008 Flexible cellular polymeric materials — Determination of hardness (indentation technique)
- ISO 2440:2019 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
- ISO 2441:1975 Pipeline flanges for general use — Shapes and dimensions of pressure-tight surfaces [Withdrawn: replaced with ISO 7005-(1-3)]
- ISO 2443:1980 Vines — Root stock, cuttings, scions and plants — Specification [Withdrawn without replacement]
- ISO 2444:1988 Joints in building – Vocabulary [Withdrawn: replaced with ISO 6707-1]
- ISO 2445:1972 Joints in building — Fundamental principles for design
- ISO 2446:2008 Milk — Determination of fat content [Withdrawn: replaced with ISO 19662]
- ISO 2447:1998 Fruit and vegetable products — Determination of tin content
- ISO 2448:1998 Fruit and vegetable products — Determination of ethanol content
- ISO 2449:1974 Milk and liquid milk products — Density hydrometers for use in products with a surface tension of approximately 45 mN/m [Withdrawn without replacement]
- ISO 2450:2008 Cream — Determination of fat content — Gravimetric method (Reference method)
- ISO 2451:2017 Cocoa beans — Specification and quality requirements
- ISO 2452 Data processing — Vocabulary — Part 05: Representation of data [Draft merged into ISO 2382]
- ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
- ISO 2454:1995 Rubber products — Determination of zinc content — EDTA titrimetric method
- ISO 2455 Data processing — Vocabulary — [Draft merged into ISO 2382]
- ISO 2456:1986 Surface active agents — Water used as a solvent for tests — Specification and test methods
- ISO 2457:1976 Solid wood parquet — Classification of beech strips
- ISO 2458:1975 End-suction centrifugal pumps (rating 16 bar) — Test Code [Rejected draft]
- ISO 2460:1973 Sodium hydrogen carbonate for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method
- ISO 2461:1973 Sodium hydrogen carbonate for industrial use — Determination of matter insoluble in water
- ISO 2462:1973 Sodium chlorate for industrial use — Determination of moisture content — Gravimetric method
- ISO 2463:1973 Sodium chlorate for industrial use — Determination of chloride content — Mercurimetric method
- ISO 2464:1973 Crude glycerine for industrial use — Calculation of Matter (Organic) Non-Glycerol (MONG) [Withdrawn without replacement]
- ISO 2465:1973 Glycerols for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
- ISO 2466:1973 Potassium hydroxide for industrial use — Sampling — Test sample — Preparation of the main solution for carrying out certain determinations
- ISO 2467:2004 Cinematography — Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints — Positions and dimensions
- ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
- ISO 2470 Paper, board and pulps — Measurement of diffuse blue reflectance factor
- ISO 2470-1:2016 Part 1: Indoor daylight conditions (ISO brightness)
- ISO 2470-2:2016 Part 2: Outdoor daylight conditions (D65 brightness)
- ISO 2471:2008 Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method
- ISO 2472:1975 Ebonite — Determination of tensile strength and elongation at break [Withdrawn without replacement]
- ISO 2473:1972 Ebonite — Determination of cross-breaking strength [Withdrawn without replacement]
- ISO 2474:1972 Ebonite — Determination of crushing strength [Withdrawn without replacement]
- ISO 2475:2011 Chloroprene rubber (CR) — General-purpose types — Evaluation procedure
- ISO 2476:2014 Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures
- ISO 2477:2005 Shaped insulating refractory products — Determination of permanent change in dimensions on heating
- ISO 2478:1987 Dense shaped refractory products — Determination of permanent change in dimensions on heating
- ISO 2479:1972 Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
- ISO 2480:1972 Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
- ISO 2481:1973 Sodium chloride for industrial use — Determination of halogens, expressed as chlorine — Mercurimetric method
- ISO 2482:1973 Sodium chloride for industrial use — Determination of calcium and magnesium contents — EDTA complexometric methods
- ISO 2483:1973 Sodium chloride for industrial use — Determination of the loss of mass at 110 degrees C
- ISO 2484:1973 Potassium sulphate for industrial use — Determination of potassium content — Flame emission spectrophotometric method [Withdrawn without replacement]
- ISO 2485:1973 Potassium sulphate for industrial use — Determination of potassium content — Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
- ISO 2486:1973 Potassium sulphate for industrial use — Determination of potassium content — Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
- ISO 2487:1973 Potassium sulphate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 2488:1973 Potassium sulphate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
- ISO 2489:1973 Potassium sulphate for industrial use — Determination of acidity to methyl orange [Withdrawn without replacement]
- ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module — Nominal dimensions
- ISO 2491:1974 Thin parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
- ISO 2492:1974 Thin taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
- ISO 2493 Paper and board — Determination of bending resistance
- ISO 2493-1:2010 Part 1: Constant rate of deflection
- ISO 2493-2:2011 Part 2: Taber-type tester
- ISO 2494:1974 Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method [Withdrawn: replaced with ISO 8791-(2-3)]
- ISO 2495:1995 Iron blue pigments — Specifications and methods of test
- ISO 2496:1973 secButyl alcohol for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2497:1973 Methyl ethyl ketone for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2498:1974 Methyl ethyl ketone for industrial use — Examination for residual odour [Withdrawn without replacement]
- ISO 2499:1974 isoButyl methyl ketone for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2500:1974 isoAmyl ethyl ketone for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2501:1973 Methyl ethyl ketone, isobutyl methyl ketone and isoamyl ethyl ketone for industrial use — Determination of alcoholic impurities — Volumetric method [Withdrawn without replacement]
- ISO 2502 Gas welding equipment — Safety code [Rejected draft][5]
- ISO 2503:2009 Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
- ISO 2504:1973 Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.) [Withdrawn without replacement]
- ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
- ISO 2506:1981 Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification [Withdrawn: replaced with ISO 2505]
- ISO 2507 Thermoplastics pipes and fittings — Vicat softening temperature
- ISO 2507-1:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
- ISO 2507-2:1995 Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
- ISO 2508:1981 Unplasticized polyvinyl chloride (PVC) pipes — Water absorption — Determination and specification [Withdrawn without replacement]
- ISO 2509:1989 Sound-absorbing expanded pure agglomerated cork in tiles
- ISO 2510:1989 Sound-reducing composition cork in tiles [Withdrawn without replacement]
- ISO 2511:1974 Furfural for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2512:1974 Furfural for industrial use — Determination of total carbonyl compounds — Volumetric method [Withdrawn without replacement]
- ISO 2513:1974 Acetaldehyde for industrial use — Determination of density at 15 degrees C [Withdrawn without replacement]
- ISO 2514:1974 Acetaldehyde for industrial use — Determination of water content — Karl Fischer method [Withdrawn without replacement]
- ISO 2515:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of ammoniacal nitrogen content — Volumetric method after distillation [Withdrawn without replacement]
- ISO 2516:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of total alkalinity — Volumetric method [Withdrawn without replacement]
- ISO 2517:1974 Diacetone alcohol for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2518:1974 Diacetone alcohol and hexylene glycol for industrial use — Test for miscibility with water [Withdrawn without replacement]
- ISO 2519:1974 Hexylene glycol for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2520:1974 Tritolyl phosphate for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2521:1974 Tritolyl phosphate for industrial use — Determination of acidity to phenol red — Volumetric method [Withdrawn without replacement]
- ISO 2522:1974 Tritolyl phosphate for industrial use — Determination of apparent free phenols content — Volumetric method [Withdrawn without replacement]
- ISO 2523:1974 Adipate esters for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2524:1974 Adipate esters for industrial use — Measurement of colour after heat treatment [Withdrawn without replacement]
- ISO 2525:1974 Adipate esters for industrial use — Determination of acidity to phenolphthalein — Volumetric method [Withdrawn without replacement]
- ISO 2526:1974 Adipate esters for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement]
- ISO 2527:1974 Adipate esters for industrial use — Determination of ester content — Volumetric method [Withdrawn without replacement]
- ISO 2528:2017 Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
- ISO 2529:1973 Aircraft — Zones, access doors and panels — Referencing system [Withdrawn without replacement]
- ISO 2530:1975 Keyboard for international information processing interchange using the ISO 7- bit coded character set — Alphanumeric area [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
- ISO 2532:1974 Steel wire ropes – Vocabulary
- ISO 2533:1975 Standard Atmosphere
- ISO 2534:2020 Road vehicles — Engine test code — Gross power
- ISO 2535:2001 Plastics — Unsaturated-polyester resins — Measurement of gel time at ambient temperature
- ISO 2536:1974 Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series — Dimensions of flanges [Withdrawn without replacement]
- ISO 2537:2007 Hydrometry – Rotating-element current-meters
- ISO 2538 Geometrical product specifications (GPS) – Wedges
- ISO 2538-1:2014 Part 1: Series of angles and slopes
- ISO 2538-2:2014 Part 2: Dimensioning and tolerancing
- ISO 2539:1974 Numerical control of machines — Punched tape variable block format for contouring and contouring/positioning [Withdrawn: replaced with ISO 6983-1]
- ISO 2540:2016 Centre drills for centre holes with protecting chamfer — Type B
- ISO 2541:2016 Centre drills for centre holes with radius form — Type R
- ISO 2542:1980 Internal combustion engines — Spark plug ignition — Terminology [Withdrawn: replaced with ISO 6518-1]
- ISO 2543:1973 Copper and copper alloys — Determination of manganese — Spectrophotometric method [Withdrawn without replacement]
- ISO 2544:1975 Textile machinery and accessories — Warping machinery — Preparation of warp for weaving — Vocabulary [Withdrawn without replacement]
- ISO 2546:1973 Seamless plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
- ISO 2547:1973 Welded plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
- ISO 2548:1973 Centrifugal, mixed flow and axial pumps — Code for acceptance tests — Class C [Withdrawn: replaced with ISO 9906]
- ISO 2549:1972 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground
- ISO 2550:1972 Textile floor coverings — Hand-made carpets — Determination of types of knots
- ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form — Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
- ISO 2553:2019 Welding and allied processes – Symbolic representation on drawings – Welded joints
- ISO 2554:1997 Plastics — Unsaturated polyester resins — Determination of hydroxyl value
- ISO 2555:2018 Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method
- ISO 2556:1974 Plastics — Determination of the gas transmission rate of films and thin sheets under atmospheric pressure — Manometric method [Withdrawn without replacement]
- ISO 2557 Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified maximum reversion
- ISO 2557-1:1989 Part 1: Bars [Withdrawn without replacement]
- ISO 2557-2:1986 Part 2: Plates [Withdrawn without replacement]
- ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
- ISO 2559:2011 Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
- ISO 2560:2020 Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification
- ISO 2561:2012 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
- ISO 2562:1973 Modular units for machine tool construction — Slide units
- ISO 2563:2009 Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings
- ISO 2564 Conveyor chains, attachments and chain wheels — Part 2: Chain wheels [Draft renamed ISO 1977-2]
- ISO 2565 Conveyor chains, attachments and chain wheels — Part 3: Attachments — Metric series [Draft renamed ISO 1977-3]
- ISO 2566 Steel — Conversion of elongation values
- ISO 2566-1:2021 Part 1: Carbon and low-alloy steels
- ISO 2566-2:2021 Part 2: Austenitic steels
- ISO 2568:1988 Hand- and machine-operated circular screwing dies and hand-operated die stocks
- ISO 2569:1994 Cork stoppers — Vocabulary [Withdrawn without replacement]
- ISO 2572:1982 Textile machinery and accessories — Card gauges
- ISO 2573:1977 Tensile testing systems — Determination of K-value [Withdrawn without replacement]
- ISO 2574:1994 Aircraft – Electrical cables – Identification marking
- ISO 2575:2021 Road vehicles – Symbols for controls, indicators and tell-tales
- ISO 2576:1972 Chemical analysis of zinc alloys — Polarographic determination of lead and cadmium in zinc alloys containing copper [Withdrawn without replacement]
- ISO 2577:2007 Plastics — Thermosetting moulding materials — Determination of shrinkage
- ISO 2578:1993 Plastics — Determination of time-temperature limits after prolonged exposure to heat
- ISO 2579 Plastics — Instrumental evaluation of color difference [Rejected draft]
- ISO 2580 Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
- ISO 2580-1:2002 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19062-1]
- ISO 2580-2:2003 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19062-2]
- ISO 2581:1975 Rigid cellular plastics — Determination of apparent thermal conductivity by means of a heat-flow meter [Withdrawn: replaced with ISO 8301]
- ISO 2582:1978 Cork and cork products — Determination of thermal conductivity — Hot plate method [Withdrawn without replacement]
- ISO 2583:1972 Tool shanks and equipment with 7/24 tapers — Collar dimensions [Withdrawn: replaced with ISO 297]
- ISO 2584:2016 Cylindrical cutters with plain bore and key drive — Metric series
- ISO 2585:1972 Slotting cutters with plain bore and key drive — Metric series
- ISO 2586:1985 Shell end mills with plain bore and tenon drive — Metric series
- ISO 2587:1972 Side and face milling cutters with plain bore and key drive — Metric series
- ISO 2588:2014 Leather — Sampling — Number of items for a gross sample
- ISO 2589:2016 Leather — Physical and mechanical tests — Determination of thickness
- ISO 2590:1973 General method for the determination of arsenic — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
- ISO 2591 Test sieving
- ISO 2591-1:1988 Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
- ISO 2592:2017 Petroleum and related products — Determination of flash and fire points — Cleveland open cup method
- ISO/IEC 2593:2000 Information technology – Telecommunications and information exchange between systems – 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
- ISO 2594:1972 Building drawings — Projection methods [Withdrawn: replaced with ISO 128-43]
- ISO 2595:1973 Building drawings — Dimensioning of production drawings — Representation of manufacturing and work sizes [Withdrawn: replaced with ISO 129, now ISO 129-1]
- ISO 2596:2006 Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods
- ISO 2597 Iron ores — Determination of total iron content
- ISO 2597-1:2006 Part 1: Titrimetric method after tin(II) chloride reduction
- ISO 2597-2:2019 Part 2: Titrimetric methods after titanium(III) chloride reduction
- ISO 2598 Iron ores — Determination of silicon content
- ISO 2598-1:1992 Part 1: Gravimetric methods
- ISO 2598-2:1992 Part 2: Reduced molybdosilicate spectrophotometric method
- ISO 2599:2003 Iron ores — Determination of phosphorus content — Titrimetric method
- ISO 2600 Iron ores — Sampling — Incremental method [Rejected draft]
- ISO 2601 Iron ores — Preparation of samples [Rejected draft]
- ISO 2602:1980 Statistical interpretation of test results – Estimation of the mean – Confidence interval
- ISO 2603:2016 Simultaneous interpreting — Permanent booths — Requirements
- ISO 2604 Steel products for pressure purposes — Quality requirements
- ISO 2604-1:1975 Part 1: Forgings [Withdrawn: replaced with ISO 9327-(1-5)]
- ISO 2604-2:1975 Part 2: Wrought [Withdrawn: replaced with ISO 9329-(1-4)]
- ISO 2604-3:1975 Part 3: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9330-(1-3)]
- ISO 2604-4:1975 Part 4: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9328-(1-5)]
- ISO 2604-5:1978 Part 5: Longitudinally welded austenitic stainless steel tubes [Withdrawn: replaced with ISO 9330-6]
- ISO 2604-6:1978 Part 6: Submerged arc longitudinally or spirally welded steel tubes [Withdrawn: replaced with ISO 9330-1]
- ISO/TR 2604-7:1986 Part 7: Carbon steel plate (thicknesses over 100 to 250 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
- ISO 2604-8:1985 Part 8: Plates of weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition (thicknesses from 3 to 70 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
- ISO 2605 Steel products for pressure purposes — Derivation and verification of elevated temperature properties [Original draft renamed ISO 2604-2]
- ISO 2605-1:1976 Part 1: Yield or proof stress of carbon and low alloy steel products [Withdrawn without replacement]
- ISO 2605-2:1976 Part 2: Proof stress of austenitic steel products [Withdrawn without replacement]
- ISO 2605-3:1985 Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- ISO 2606 [Draft renamed ISO 2604-3]
- ISO 2607 [Draft renamed ISO 2604-4]
- ISO 2608 Carbon and low-alloy steels — procedure for deriving minimum proof stress values
- ISO 2624:1990 Copper and copper alloys — Estimation of average grain size
- ISO 2625:1973 Copper and copper alloys — Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
- ISO 2626:1973 Copper — Hydrogen embrittlement test
- ISO 2627:1973 Copper and copper alloys — Simple torsion testing of wire [Withdrawn: replaced with ISO 7800]
- ISO 2628:1973 Basic mode control procedures – Complements
- ISO 2629:1973 Basic mode control procedures – Conversational information message transfer
- ISO/TR 2630:1978 Rubbers, raw — Sampling for inspection by variables [Withdrawn: replaced with ISO 1795]
- ISO 2631 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration
- ISO 2631-1:1997 Part 1: General requirements
- ISO 2631-2:2003 Part 2: Vibration in buildings (1 Hz to 80 Hz)
- ISO 2631-3:1985 Part 3: Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0,1 to 0,63 Hz [Withdrawn: replaced with ISO 2631-1]
- ISO 2631-4:2001 Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
- ISO 2631-5:2018 Part 5: Method for evaluation of vibration containing multiple shocks
- ISO 2632 Roughness comparison specimens
- ISO 2632-1:1985 Part 1: Turned, ground, bored, milled, shaped and planed [Withdrawn without replacement]
- ISO 2632-2:1985 Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished [Withdrawn without replacement]
- ISO 2632-3:1979 Part 3: Cast surfaces [Withdrawn without replacement]
- ISO 2633:1974 Determination of imposed floor loads in production buildings and warehouses [Withdrawn without replacement]
- ISO 2634 Current codes for designing reinforcements of openings [Rejected draft][6]
- ISO 2635:2003 Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications — Dimensions and characteristics
- ISO 2636:1973 Information processing — Conventions for incorporating flowchart symbols in flowcharts [Withdrawn: replaced with ISO 5807]
- ISO 2637:1973 Aluminium and its alloys — Determination of zinc — Atomic absorption method [Withdrawn: replaced with ISO 5194]
- ISO 2638 Liquid flow measurement in open channels — Dilution methods for the measurement of steady flow — Part 2: Integration method [Draft renamed ISO 555-2
- ISO 2639:2002 Steels — Determination and verification of the depth of carburized and hardened cases [Withdrawn: replaced with ISO 18203]
- ISO 2640 Commercial refrigerated cabinets — Methods of test — Defrosting test [Draft renamed ISO 1992-4]
- ISO 2641 Commercial refrigerated cabinets — Methods of test — Water vapour condensation test [Draft renamed ISO 1992-5]
- ISO 2642 Commercial refrigerated cabinets — Methods of test — Electrical energy consumption test [Draft renamed ISO 1992-6]
- ISO 2643 Commercial refrigerated cabinets — Methods of test — Test for odour of material [Rejected draft]
- ISO 2644:1975 Materials and equipment for petroleum and natural gas industries — Steel drill pipe for oil or natural gas wells [Withdrawn without replacement]
- ISO 2645:1975 Materials and equipment for petroleum and natural gas industries — Casing and tubing for oil or natural gas wells [Withdrawn: replaced with ISO 11960]
- ISO 2646:1974 Wool — Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
- ISO 2647:2020 Wool — Determination of percentage of medullated fibres by the projection microscope
- ISO 2648:2020 Wool — Determination of fibre length distribution parameters — Capacitance method
- ISO 2649:1974 Wool — Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester [Withdrawn without replacement]
- ISO 2650 – ISO 2999
- [edit]
- ISO 2650:1974 Environmental tests for aircraft equipment – Part 1: Scope and applicability [Withdrawn: replaced with ISO 7137]
- ISO 2651 Environmental tests for aircraft equipment – Part 2.1: Temperature, pressure and humidity [Rejected draft]
- ISO 2652 Environmental tests for aircraft equipment – Part 2.2: Humidity (24 h cycle) [Rejected draft]
- ISO 2653:1975 Environmental tests for aircraft equipment
- ISO 2653-1:1975 — Part 1: Ice formation [Withdrawn: replaced with ISO 7137]
- ISO 2655:1975 Environmental tests for aircraft equipment – Part 2.5: Waterproofness [Withdrawn: replaced with ISO 7137]
- ISO 2657:1976 Environmental tests for aircraft equipment – Part 2.7: Change of temperature [Withdrawn: replaced with ISO 7137]
- ISO 2658:1976 Environmental tests for aircraft equipment – Part 2.8: Mould growth [Withdrawn: replaced with ISO 7137]
- ISO 2659 Environmental tests for aircraft equipment – Part 2.9: Salt mist [Rejected draft]
- ISO 2663 Environmental tests for aircraft equipment – Part 2.13: Sealing tests [Rejected draft]
- ISO 2668 Environmental tests for aircraft equipment – Part 3.1: Vibration [Rejected draft]
- ISO 2669:1995 Environmental tests for aircraft equipment – Steady-state acceleration
- ISO 2671:1982 Environmental tests for aircraft equipment – Part 3.4: Acoustic vibration
- ISO 2676:1975 Environmental tests for aircraft equipment – Part 4.1: [Withdrawn: replaced with ISO 7137]
- ISO 2678:1985 Environmental tests for aircraft equipment — Insulation resistance and high voltage tests for electrical equipment
- ISO 2683 Environmental tests for aircraft equipment – Part 5.1: Explosion proofness [Rejected draft]
- ISO 2684:1974 Environmental tests for aircraft equipment – Part 5.2: Fluid contamination [Withdrawn: replaced with ISO 7137]
- ISO 2685:1998 Aircraft – Environmental test procedure for airborne equipment – Resistance to fire in designated fire zones
- ISO 2690:1973 Unrecorded magnetic tapes for instrumentation applications — Physical properties and test methods [Withdrawn without replacement]
- ISO 2691:1987 Photography — Expendable photoflash lamps (without integral reflector) — Definitions and requirements for luminous flux/time characteristics [Withdrawn without replacement]
- ISO 2692:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- ISO 2694: Pressure Wessels [rejected draft]
- ISO 2695:1976 Fibre building boards — Hard and medium boards for general purposes — Quality specifications — Appearance, shape and dimensional tolerances [Withdrawn without replacement]
- ISO 2696:1976 Fibre building boards — Hard and medium boards for general purposes — Quality specifications — Water absorption and swelling in thickness [Withdrawn without replacement]
- ISO 2697:1999 Diesel engines — Fuel nozzles — Size “S”
- ISO 2698:2016 Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
- ISO 2699:1994 Diesel engines — Flange-mounted fuel injectors, size “S” — Types 2, 3, 4, 5 and 6
- ISO 2700:1974 Road vehicles — Screw-mounted injection nozzle holders size “S” — Type 1 [Withdrawn without replacement]
- ISO 2701:1977 Drawn wire for general purpose non-alloy steel wire ropes — Terms of acceptance [Withdrawn without replacement]
- ISO 2702:1977 Heat-treated steel tapping screws — Mechanical properties
- ISO 2703:1973 Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification [Withdrawn without replacement]
- ISO 2704:1998 Road vehicles — M10 x 1 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
- ISO 2705:2006 Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
- ISO 2706 Micrographics — Transparent A6 size microfiche of uniform division — Image arrangement No. 1 [Draft merged into ISO 2707]
- ISO 2707:1980 Micrographics — Transparent A6 size microfiche of uniform division — Image arrangements No. 1 and No. 2 [Withdrawn: replaced with ISO 9923]
- ISO 2708:1980 Micrographics — Transparent A6 size microfiche of variable division — Image arrangements A and B [Withdrawn: replaced with ISO 9923]
- ISO 2709:2008 Information and documentation – Format for information exchange
- ISO 2710 Reciprocating internal combustion engines – Vocabulary
- ISO 2710-1:2000 Part 1: Terms for engine design and operation
- ISO 2710-2:1999 Part 2: Terms for engine maintenance
- ISO 2711:1973 Information processing interchange – Representation of ordinal dates [Withdrawn: replaced by ISO 8601:1988]
- ISO 2712:1973 Copper and copper alloys — Rockwell superficial hardness test (N and T scales) [Withdrawn: replaced with ISO 1024]
- ISO 2713:1973 Copper and copper alloys — Rockwell hardness test (B, F and G scales) [Withdrawn: replaced with ISO 6508]
- ISO 2714:2017 Liquid hydrocarbons — Volumetric measurement by displacement meter
- ISO 2715:2017 Liquid hydrocarbons — Volumetric measurement by turbine flowmeter
- ISO 2716:1972 Freight containers — Coding and identification [Withdrawn: replaced with ISO 6346]
- ISO 2717:1973 Sulphuric acid and oleum for industrial use — Determination of lead content — Dithizone photometric method [Withdrawn without replacement]
- ISO 2718:1974 Standard layout for a method of chemical analysis by gas chromatography [Withdrawn without replacement]
- ISO 2719:2016 Determination of flash point — Pensky-Martens closed cup method
- ISO 2720:1974 Photography — General purpose photographic exposure meters (photoelectric type) — Guide to product specification
- ISO 2721:2013 Photography — Film-based cameras — Automatic controls of exposure
- ISO 2722:1997 Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature [Withdrawn: replaced with ISO 28706-1]
- ISO 2723:1995 Vitreous and porcelain enamels for sheet steel — Production of specimens for testing [Withdrawn: replaced with ISO 28764]
- ISO 2724:1973 Vitreous and porcelain enamels for cast iron — Production of specimens for testing [Withdrawn: replaced with ISO 28764]
- ISO 2725 Assembly tools for screws and nuts — Square drive sockets
- ISO 2725-1:2017 Part 1: Hand-operated sockets
- ISO 2725-2:2017 Part 2: Machine-operated sockets (“impact”)
- ISO 2725-3:2017 Part 3: Machine-operated sockets (“non-impact”)
- ISO 2726:1995 Woodworking tools — Metal-bodied bench planes, plane cutters and cap irons [Withdrawn without replacement]
- ISO 2727:1973 Modular units for machine tool construction — Headstocks
- ISO 2728:1982 Woodworking tools — Plane irons [Withdrawn: replaced with ISO 2726]
- ISO 2729:1995 Woodworking tools — Chisels and gouges
- ISO 2730:1973 Woodworking tools — Wooden bodied planes [Withdrawn without replacement]
- ISO 2731:1973 Dee shackles [Withdrawn: replaced with ISO 2415]
- ISO 2732:1984 Steel and cast iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method [Withdrawn: replaced with ISO 10714]
- ISO 2733:1983 Vitreous and porcelain enamels — Apparatus for testing with acid and neutral liquids and their vapours [Withdrawn: replaced with ISO 28706-2]
- ISO 2734:1997 Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids [Withdrawn: replaced with ISO 28706-4]
- ISO 2735:1973 Hermetically sealed metal food containers — Capacities and diameters of round open-top and vent hole cans for milk [Withdrawn: replaced with ISO 3004-6 (now replaced with ISO 10653 and 10654 and ISO/TR 11761, 11762, and 11776) and ISO/TR 8610]
- ISO 2736 Concrete tests — Test specimens
- ISO 2736-1 Part 1: Sampling of fresh concrete [Withdrawn: replaced with ISO 1920-1]
- ISO 2736-2 Part 2: Making and curing of test specimens for strength tests [Withdrawn: replaced with ISO 1920-3]
- ISO 2737:1973 Permeable sintered metal materials — Determination of oil content [Withdrawn: replaced with ISO 2738]
- ISO 2738:1999 Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity
- ISO 2739:2012 Sintered metal bushings — Determination of radial crushing strength
- ISO 2740:2009 Sintered metal materials, excluding hardmetals — Tensile test pieces
- ISO 2741:1973 Zinc alloys — Complexometric determination of magnesium [Withdrawn without replacement]
- ISO 2742:1998 Vitreous and porcelain enamels — Determination of resistance to boiling citric acid [Withdrawn: replaced with ISO 28706-2]
- ISO 2743:1986 Vitreous and porcelain enamels — Determination of resistance to condensing hydrochloric acid vapour [Withdrawn: replaced with ISO 28706-2]
- ISO 2744:1998 Vitreous and porcelain enamels — DDetermination of resistance to boiling water and water vapour [Withdrawn: replaced with ISO 28706-2]
- ISO 2745:1998 Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide [Withdrawn: replaced with ISO 28706-4]
- ISO 2746:2015 Vitreous and porcelain enamels — High voltage test
- ISO 2747:1998 Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock
- ISO 2748:1983 Textile machinery and accessories — Lingoes for Jacquard weaving [Withdrawn without replacement]
- ISO 2749:1973 Urea for industrial use — Measurement of the pH of a solution of urea of conventional concentration (100 g/L) — Potentiometric method [Withdrawn without replacement]
- ISO 2750:1974 Urea for industrial use — Measurement of colour in Hazen units (platinum-cobalt scale) of a urea-formaldehyde solution [Withdrawn without replacement]
- ISO 2751:1973 Urea for industrial use — Determination of the buffer coefficient — Potentiometric method [Withdrawn without replacement]
- ISO 2752:1973 Urea for industrial use — Measurement of the variation of pH in the presence of formaldehyde — Potentiometric method [Withdrawn without replacement]
- ISO 2753:1973 Urea for industrial use — Determination of water content — Karl Fischer method [Withdrawn without replacement]
- ISO 2754:1973 Urea for industrial use — Determination of biuret content — Photometric method [Withdrawn without replacement]
- ISO 2755:1973 1,1,1- Trichloroethane for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2756:1973 Hexachlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2757:1973 1,2,4- Trichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 2758:2014 Paper — Determination of bursting strength
- ISO 2759:2014 Board — Determination of bursting strength
- ISO 2760:1975 Crude sodium borates for industrial use — Determination of total aluminium content — Titrimetric method [Withdrawn without replacement]
- ISO 2761:1975 Crude sodium borates for industrial use — Determination of total titanium content — Photometric method [Withdrawn without replacement]
- ISO 2762:1973 Hydrochloric acid for industrial use — Determination of soluble sulphates — Turbidimetric method
- ISO 2763 Data processing — Vocabulary — Part 02: Mathematics and logic, arithmetic and logical operations [Draft merged into ISO 2382]
- ISO 2764:1974 Terms and symbols for flight dynamics — Concepts, quantities and symbols used in the study of aircraft stability and control [Withdrawn: replaced with ISO 1151-4]
- ISO 2765:1974 Flight dynamics — Concepts, quantities and symbols — Quantities used in measurements [Withdrawn: replaced with ISO 1151-5]
- ISO 2766:1973 Single lifting hooks with shank — Capacity up to 25 tonnes — Grades M, P, S (T, V) — Hammer and drop forged hooks [Withdrawn without replacement]
- ISO 2767:1973 Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity [Withdrawn: replaced with ISO 10215 and ISO 10216]
- ISO 2768 General tolerances
- ISO 2768-1:1989 Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 2768-2:1989 Part 2: Geometrical tolerances for features without individual tolerance indications [Withdrawn: replaced with ISO 22081]
- ISO 2769:1973 Modular units for machine tool construction — Wing bases for slide units
- ISO 2770:1974 Tapping screws according to ISO/R 1478 to 1483 — Minimum and maximum lengths [Withdrawn without replacement]
- ISO 2771:1980 Iron ores — Determination of aluminium content — Oxine gravimetric and titrimetric methods [Withdrawn without replacement]
- ISO 2772:2019 Test conditions for box type vertical drilling machines — Testing of the accuracy
- ISO 2773 Test conditions for pillar type vertical drilling machines
- ISO 2773-1:1973 Part 1: Geometrical tests
- ISO 2773-2:1973 Part 2: Practical test
- ISO 2775:1977 Office machines and printing machines used for information processing – Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
- ISO 2776:1974 Modular co-ordination — Co-ordinating sizes for doorsets — External and internal [Withdrawn without replacement]
- ISO 2777:1974 Modular co-ordination — Co-ordinating sizes for rigid flat sheet boards used in building [Withdrawn without replacement]
- ISO/TR 2778:1977 Wrought aluminium and aluminium alloys — Drawn tubes — Mechanical properties [Withdrawn: replaced with ISO 6363-2]
- ISO 2779:1973 Aluminium machining alloys — Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg [Withdrawn: replaced with ISO 209-1]
- ISO 2780:2018 Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
- ISO 2781:2018 Rubber, vulcanized or thermoplastic — Determination of density
- ISO 2782 Rubber, vulcanized or thermoplastic — Determination of permeability to gases
- ISO 2782-1:2016 Part 1: Differential-pressure methods
- ISO 2782-2:2018 Part 2: Equal-pressure method
- ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer [Withdrawn without replacement]
- ISO 2784:1974 Continuous forms used for information processing – Sizes and sprocket feed holes
- ISO 2785:1986 Directives for selection of asbestos-cement pipes subject to external loads with or without internal pressure [Withdrawn without replacement]
- ISO 2786 Modular co-ordination — Internal wood doorsets — Principal dimensions [Rejected draft]
- ISO 2787:1984 Rotary and percussive pneumatic tools — Performance tests
- ISO 2788:1986 Documentation – Guidelines for the establishment and development of monolingual thesauri [Withdrawn: replaced by ISO 25964-1:2011]
- ISO 2789:2013 Information and documentation – International library statistics
- ISO 2790:2020 Belt drives — V-belts for the automotive industry and corresponding pulleys — Dimensions
- ISO 2791:1973 Bow shackles [Withdrawn: replaced with ISO 2415]
- ISO 2792 Dentistry – Vocabulary – Part 2 [Draft merged into ISO 1942]
- ISO 2793 Dentistry – Vocabulary – Part 3 [Draft merged into ISO 1942]
- ISO 2794 Dentistry – Vocabulary – Part 4 [Draft merged into ISO 1942]
- ISO 2795:2020 Plain bearings — Sintered bushes — Dimensions and tolerances
- ISO 2796:1986 Cellular plastics, rigid — Test for dimensional stability
- ISO 2797:2017 Textile glass — Rovings — Basis for a specification
- ISO 2798:1974 Plastics — Designation of copolymer resins of vinyl chloride [Withdrawn: replaced with ISO 1060-1]
- ISO/TR 2799:1978 Cellular plastics — Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load [Withdrawn: replaced with ISO 7616]
- ISO 2800:1973 Photography — Expendable photoflash lamps — Definition and evaluation of flashability [Withdrawn without replacement]
- ISO/TR 2801:2007 Clothing for protection against heat and flame — General recommendations for selection, care and use of protective clothing
- ISO 2802:1974 Textile machinery and accessories — Plastic travellers for spinning and twisting [Withdrawn: replaced with ISO 96-2]
- ISO 2803:1974 Photography — Silver-gelatin type microfilms — Processing and storage for archival purposes [Withdrawn: replaced with ISO 4331 and ISO 4332 (both replaced with ISO 10602, now replaced with ISO 18901), and ISO 5466 (now replaced with ISO 18911)]
- ISO 2804:1996 Wire, bar or tube drawing dies — As-sintered pellets of hardmetal (carbide) — Dimensions
- ISO 2805 Transliteration of the alphabets of non-Slavic languages using Cyrillic characters [Rejected draft]
- ISO 2806:1994 Industrial automation systems – Numerical control of machines – Vocabulary
- ISO 2808:2019 Paints and varnishes — Determination of film thickness
- ISO 2809:1976 Paints and varnishes — Determination of light fastness of paints for interior use [Withdrawn: replaced with ISO 11341, now replaced with ISO 16474-(1-2)]
- ISO 2810:2020 Paints and varnishes — Natural weathering of coatings — Exposure and assessment
- ISO 2811 Paints and varnishes — Determination of density
- ISO 2811-1:2016 Part 1: Pycnometer method
- ISO 2811-2:2011 Part 2: Immersed body (plummet) method
- ISO 2811-3:2011 Part 3: Oscillation method
- ISO 2811-4:2011 Part 4: Pressure cup method
- ISO 2812 Paints and varnishes — Determination of resistance to liquids
- ISO 2812-1:2017 Part 1: Immersion in liquids other than water
- ISO 2812-2:2018 Part 2: Water immersion method
- ISO 2812-3:2019 Part 3: Method using an absorbent medium
- ISO 2812-4:2017 Part 4: Spotting methods
- ISO 2812-5:2018 Part 5: Temperature-gradient oven method
- ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
- ISO 2814:1973 Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour [Withdrawn without replacement]
- ISO 2815:2003 Paints and varnishes — Buchholz indentation test
- ISO 2816:1973 Fundamental characteristics of a system of shoe sizing to be known as Mondopoint [Withdrawn: replaced with ISO 9407]
- ISO 2817:1999 Tobacco and tobacco products — Determination of silicated residues insoluble in hydrochloric acid
- ISO 2818:2018 Plastics — Preparation of test specimens by machining
- ISO 2819:2017 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
- ISO 2820:1974 Leather — Raw hides of cattle and horses — Method of trim
- ISO 2821:1974 Leather — Raw hides of cattle and horses — Preservation by stack salting
- ISO 2822 Raw cattle hides and calf skins
- ISO 2822-1:1998 Part 1: Descriptions of defects
- ISO 2823 Statistics — Vocabulary and symbols — Third series [Rejected draft merged into ISO 3534]
- ISO 2824 Symbolic designation of direction of closing and faces of doors, windows and shutters — Part 2 [Rejected draft]
- ISO 2825:1981 Spices and condiments — Preparation of a ground sample for analysis
- ISO 2826:1974 Apricots — Guide to cold storage
- ISO 2827:1988 Photography — Electronic flash equipment — Determination of light output and performance
- ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium — Determination of fluorine content — Alizarin complexone and lanthanum chloride spectrophotometric method
- ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium — Determination of phosphorus content — Reduced phosphomolybdate spectrophotometric method
- ISO 2830:1973 Cryolite, natural and artificial — Determination of aluminium content — Atomic absorption method
- ISO 2831:1973 Sodium fluoride for industrial use — Determination of water-insoluble matter
- ISO 2832:1973 Sodium fluoride for industrial use — Determination of moisture content
- ISO 2833:1973 Sodium fluoride for industrial use — Determination of fluorine content — Modified Willard-Winter method
- ISO 2834 Graphic technology — Laboratory preparation of test prints
- ISO 2834-1:2020 Part 1: Paste inks
- ISO 2834-2:2015 Part 2: Liquid printing inks
- ISO 2834-3:2008 Part 3: Screen printing inks
- ISO 2835:1974 Prints and printing inks — Assessment of light fastness [Withdrawn without replacement]
- ISO 2836:2021 Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents
- ISO 2837:1996 Graphic technology — Prints and printing inks — Assessment of resistance to solvents [Withdrawn: replaced with ISO 2836]
- ISO 2838:1974 Prints and printing inks — Assessment of resistance to alkalis [Withdrawn: replaced with ISO 2836]
- ISO 2839:1974 Prints and printing inks — Assessment of resistance to soaps [Withdrawn: replaced with ISO 2836]
- ISO 2840:1974 Prints and printing inks — Assessment of resistance of prints to detergents [Withdrawn: replaced with ISO 2836]
- ISO 2841:1974 Prints and printing inks — Assessment of resistance of prints to cheese [Withdrawn: replaced with ISO 2836]
- ISO 2842:1974 Prints and printing inks — Assessment of resistance of prints to edible oils [Withdrawn: replaced with ISO 2836]
- ISO 2843:1974 Prints and printing inks — Assessment of resistance of prints to impregnation by wax or paraffin wax [Withdrawn: replaced with ISO 2836]
- ISO 2844:1974 Prints and printing inks — Assessment of resistance of prints to spices [Withdrawn: replaced with ISO 2836]
- ISO 2845:1975 Set of printing inks for letterpress printing — Colorimetric characteristics [Withdrawn: replaced with ISO 2846-1]
- ISO 2846 Graphic technology — Colour and transparency of printing ink sets for four-colour printing (originally Set of printing inks for offset printing — Colorimetric characteristics)
- ISO 2846-1:2017 Part 1: Sheet-fed and heat-set web offset lithographic printing
- ISO 2846-2:2007 Part 2: Coldset offset lithographic printing
- ISO 2848:1984 Building construction – Modular coordination – Principles and rules
- ISO 2849 Building construction – Modular coordination – Modules for vertical dimensions [Rejected draft]
- ISO 2850:1973 Potassium sulphate for industrial use — Determination of loss of mass at 105 degrees C [Withdrawn without replacement]
- ISO 2851:1993 Stainless steel bends and tees for the food industry [Withdrawn without replacement]
- ISO 2852:1993 Stainless steel clamp pipe couplings for the food industry [Withdrawn without replacement]
- ISO 2853:1993 Stainless steel threaded couplings for the food industry [Withdrawn without replacement]
- ISO 2854:1976 Statistical interpretation of data – Techniques of estimation and tests relating to means and variances
- ISO 2855:1976 Radioactive materials — Packagings — Test for contents leakage and radiation leakage [Withdrawn without replacement]
- ISO 2856:1981 Elastomers — General requirements for dynamic testing [Withdrawn: replaced with ISO 4664]
- ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
- ISO 2858:1975 End-suction centrifugal pumps (rating 16 bar) — Designation, nominal duty point and dimensions
- ISO 2859 Sampling procedures for inspection by attributes
- ISO 2859-1:1999 Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 2859-2:2020 Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
- ISO 2859-3:2005 Part 3: Skip-lot sampling procedures
- ISO 2859-4:2020 Part 4: Procedures for assessment of declared quality levels
- ISO 2859-5:2005 Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 2859-10:2006 Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes [Withdrawn: replaced with ISO 28590]
- ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
- ISO 2861:2020 Vacuum technology — Dimensions of clamped-type quick-release couplings
- ISO 2862:1974 Cinematography — Single-track magnetic sound record on 35 mm motion-picture films — Position and dimensions [Withdrawn without replacement]
- ISO 2863:1973 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Run length of film — Dimensions and specifications [Withdrawn without replacement]
- ISO 2864:1974 Interchangeable magnetic six-disk pack — Physical and magnetic characteristics [Withdrawn without replacement]
- ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium — Determination of boron content — Curcumin spectrophotometric method
- ISO 2866:1974 Sulphur for industrial use — Determination of total carbon content — Titrimetric method [Withdrawn without replacement]
- ISO 2867:2011 Earth-moving machinery — Access systems
- ISO 2868:1973 Surface active agents — Detergents — Anionic-active matter stable to acid hydrolysis — Determination of trace amounts
- ISO 2869:1973 Surface active agents — Detergents — Anionic-active matter hydrolyzable under alkaline conditions — Determination of hydrolyzable and non-hydrolyzable anionic-active matter
- ISO 2870:2009 Surface active agents — Detergents — Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
- ISO 2871 Surface active agents — Detergents — Determination of cationic-active matter content
- ISO 2871-1:2010 Part 1: High-molecular-mass cationic-active matter
- ISO 2871-2:2010 Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
- ISO 2872:1985 Packaging — Complete, filled transport packages — Compression test [Withdrawn: replaced with ISO 12048]
- ISO 2873:2000 Packaging — Complete, filled transport packages and unit loads — Low pressure test
- ISO 2874:1985 Packaging — Complete, filled transport packages — Stacking test using compression tester [Withdrawn: replaced with ISO 12048]
- ISO 2875:2000 Packaging — Complete, filled transport packages and unit loads — Water-spray test
- ISO 2876:1985 Packaging — Complete, filled transport packages — Rolling test
- ISO 2877:1974 Sulphuric acid for industrial use — Determination of chlorides content — Potentiometric method [Withdrawn without replacement]
- ISO 2878:2017 Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance
- ISO 2879:1975 Glycerine for industrial use — Determination of glycerol content — Titrimetric method [Withdrawn without replacement]
- ISO 2880 Determination of Sound Power Emitted by Sma 11 Noise Sources in Reverberation Rooms — Part 1: Broad Band Sources [Rejected draft]
- ISO 2881:1992 Tobacco and tobacco products — Determination of alkaloid content — Spectrometric method
- ISO 2882:1979 Rubber, vulcanized — Antistatic and conductive products for hospital use — Electrical resistance limits [Withdrawn without replacement]
- ISO 2883:1980 Rubber, vulcanized — Antistatic and conductive products for industrial use — Electrical resistance limits [Withdrawn without replacement]
- ISO 2884 Paints and varnishes — Determination of viscosity using rotary viscometers
- ISO 2884-1:1999 Part 1: Cone-and-plate viscometer operated at a high rate of shear
- ISO 2884-2:2003 Part 2: Disc or ball viscometer operated at a specified speed
- ISO 2885:1973 Acetaldehyde for industrial use — Determination of total content of carbonyl compounds — Volumetric method [Withdrawn without replacement]
- ISO 2886:1973 Acetaldehyde for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 2887:1973 secButyl alcohol, methyl ethyl ketone, isobutyl methyl ketone, isoamyl ethyl ketone, diacetone alcohol and hexylene glycol for industrial use — Determination of acidity to phenolphthalein — Volumetric method [Withdrawn without replacement]
- ISO 2888:1973 Furfural for industrial use — Determination of acidity to phenolphthalein — Volumetric method [Withdrawn without replacement]
- ISO 2889:2021 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
- ISO 2890:1973 Road vehicles — Vacuum braking for caravans and light trailers [Withdrawn without replacement]
- ISO 2891:1977 Modular units for machine tool construction — Centre bases and columns [Withdrawn without replacement]
- ISO 2892:2007 Austenitic cast irons — Classification
- ISO 2893 General Methods of Test for Pigments — Comparison of Ease of Dispersion (Oscillatory Shaking Method) [Rejected Draft]
- ISO 2894:1980 Embossed credit cards — Specifications, numbering system and registration procedure [Withdrawn: replaced with ISO 7810, ISO 7811-(1-5), and ISO/IEC 7813]
- ISO 2895:1974 Cinematography — Screen luminance for review room projection of motion-picture film intended for indoor theatres [Withdrawn: replaced with ISO 2910]
- ISO 2896:2001 Rigid cellular plastics — Determination of water absorption
- ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes [Withdrawn without replacement]
- ISO 2898 Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials
- ISO 2898-1:1996 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24023-1]
- ISO 2898-2:2008 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24023-2]
- ISO 2899:1974 Sulphuric acid and oleums for industrial use — Determination of ammoniacal nitrogen content — Spectrophotometric method [Withdrawn without replacement]
- ISO 2900:1973 Potassium Hydroxide for Industrial Use – Determination of Carbon Dioxide Content – Titrimetric Method [Withdrawn without replacement]
- ISO 2901:2016 ISO metric trapezoidal screw threads — Basic and design profiles
- ISO 2902:2016 ISO metric trapezoidal screw threads — General plan
- ISO 2903:2016 ISO metric trapezoidal screw threads — Tolerances
- ISO 2904:2020 ISO metric trapezoidal screw threads — Basic dimensions
- ISO 2905:1985 Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads
- ISO 2906:2002 Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Position and dimensions
- ISO 2907:2002 Cinematography — Maximum projectable image area on 35 mm motion-picture film — Position and dimensions
- ISO 2908:1974 Petroleum waxes — Determination of oil content [Withdrawn without replacement]
- ISO 2909:2002 Petroleum products — Calculation of viscosity index from kinematic viscosity
- ISO 2910:2018 Cinematography — Screen luminance and chrominance for the projection of film motion pictures
- ISO 2911:2004 Sweetened condensed milk — Determination of sucrose content — Polarimetric method
- ISO 2912:1973 Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions
- ISO 2913:1975 Wool — Colorimetric determination of cystine plus cysteine in hydrolysates
- ISO 2915:1975 Wool — Determination of cysteic acid content of wool hydrolysates by paper electrophoresis and colorimetry
- ISO 2916:1975 Wool — Determination of alkali content
- ISO 2917:1999 Meat and meat products — Measurement of pH — Reference method
- ISO 2918:1975 Meat and meat products — Determination of nitrite content (Reference method)
- ISO 2919:2012 Radiological protection — Sealed radioactive sources — General requirements and classification
- ISO 2920:2004 Whey cheese — Determination of dry matter (Reference method)
- ISO 2921:2019 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
- ISO 2922:2020 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours
- ISO 2923:1996 Acoustics – Measurement of noise on board vessels
- ISO 2924:1973 Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm
- ISO 2925:1973 Aluminium fluoride for industrial use – Preparation and storage of test samples [Withdrawn without replacement]
- ISO 2926:2013 Aluminium oxide used for the production of primary aluminium — Particle size analysis for the range 45 μm to 150 μm — Method using electroformed sieves
- ISO 2927:1973 Aluminium oxide primarily used for the production of aluminium — Sampling
- ISO 2928:2021 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification
- ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
- ISO 2930:2017 Rubber, raw natural — Determination of plasticity retention index (PRI)
- ISO 2931:2017 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
- ISO 2932:1981 Anodizing of aluminium and its alloys — Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution [Withdrawn without replacement]
- ISO 2933:1974 Bonded abrasive products — Grinding wheel dimensions (Part 3) [Withdrawn: replaced with ISO 603-(1-16)]
- ISO 2934:1973 Modular units for machine tool construction — Wing base for columns
- ISO 2935:1974 Circular saw blades for woodworking — Dimensions
- ISO 2936:2014 Assembly tools for screws and nuts — Hexagon socket screw keys
- ISO 2937:1974 Plain end seamless steel tubes for mechanical application [Withdrawn without replacement]
- ISO 2938:1974 Hollow steel bars for machining [Withdrawn without replacement]
- ISO 2939:2015 Cinematography — Picture image area on 35 mm motion-picture release prints — Position and dimensions and analogue and digital photographic sound to picture record displacement
- ISO 2940 Milling cutters mounted on centring arbors having a 7/24 taper
- ISO 2940-1:1974 Fitting dimensions — Centring arbors
- ISO 2940-2:1974 Inserted tooth cutters
- ISO 2941:2009 Hydraulic fluid power — Filter elements — Verification of collapse/burst pressure rating
- ISO 2942:2018 Hydraulic fluid power — Filter elements — Verification of fabrication integrity and determination of the first bubble point
- ISO 2943:1998 Hydraulic fluid power — Filter elements — Verification of material compatibility with fluids
- ISO 2944:2000 Fluid power systems and components — Nominal pressures
- ISO 2945 Bases for the design of structures [Rejected draft, but partly covered by ISO 4356]
- ISO 2946 Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms [Draft renamed ISO 3742]
- ISO 2947:1973 Textiles — Integrated conversion table for replacing traditional yarn numbers by rounded values in the Tex System
- ISO 2948 Brown coals and lignites — Extensive method of analysis of ash [Rejected draft]
- ISO 2949 Brown coals and lignites — Analysis of ash [Rejected draft]
- ISO 2950:1974 Brown coals and lignites — Classification by types on the basis of total moisture content and tar yield
- ISO 2951:2019 Rubber, vulcanized rubber — Determination of insulation resistance
- ISO 2953:1999 Mechanical vibration — Balancing machines — Description and evaluation [Withdrawn: replaced with ISO 21940-21]
- ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
- ISO 2955:1983 Information processing — Representation of SI and other units in systems with limited character sets [Withdrawn without replacement]
- ISO 2958:1973 Road vehicles — Exterior protection for passenger cars
- ISO 2959:2011 Textiles — Woven fabric descriptions
- ISO 2960:1974 Textiles — Determination of bursting strength and bursting distension — Diaphragm method [Withdrawn: replaced with ISO 13938-1]
- ISO 2961:1974 Aluminium oxide primarily used for the production of aluminium — Determination of an adsorption index
- ISO 2962:2010 Cheese and processed cheese products — Determination of total phosphorus content — Molecular absorption spectrometric method
- ISO/TS 2963:2006 Cheese and processed cheese products — Determination of citric acid content — Enzymatic method
- ISO 2964:1985 Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions
- ISO 2965:2019 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Determination of air permeability
- ISO 2966:1988 Cinematography — 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) — Cutting and perforating dimensions [Withdrawn without replacement]
- ISO 2967:1982 Cinematography — Magnetic stripes for sound records on 35 mm motion-picture film perforated 8 mm Type S-5R (1-3-5-7-0) — Positions and width dimensions [Withdrawn without replacement]
- ISO 2968:1981 Cinematography — Recorded characteristics for magnetic sound record on 8 mm Type S motion- picture prints and full-coat magnetic film perforated 8 mm Type S — Specifications [Withdrawn without replacement]
- ISO 2969:2015 Cinematography — B-chain electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements
- ISO 2970:1974 Cheese — determination of chloride content [Withdrawn without replacement]
- ISO 2971:2013 Cigarettes and filter rods — Determination of nominal diameter — Method using a non-contact optical measuring apparatus
- ISO 2972:1979 Numerical control of machines – Symbols
- ISO 2973 Freight containers [Rejected Draft[
- ISO 2974:2018 Diesel engines — 60° female cones for high-pressure fuel injection components
- ISO 2975 Measurement of water flow in closed conduits – Tracer methods
- ISO 2975-1:1974 Part 1: General
- ISO 2975-2:1975 Part 2: Constant rate injection method using non-radioactive tracers
- ISO 2975-3:1976 Part 3: Constant rate injection method using radioactive tracers
- ISO 2975-6:1977 Part 6: Transit time method using non-radioactive tracers
- ISO 2975-7:1977 Part 7: Transit time method using radioactive tracers
- ISO 2976:2005 Coated abrasives — Abrasive belts — Selection of width/length combinations
- ISO 2977:1997 Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point
- ISO 2979 Aircraft — Design of intermodal containers [Rejected draft]
- ISO 2982 Rolling bearings — Accessories
- ISO 2982-1:2013 Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
- ISO 2982-2:2013 Part 2: Dimensions for locknuts and locking devices
- ISO 2983:1975 Rolling bearings — Locknuts, wide series, and lockwashers with bent inner tab [Withdrawn without replacement]
- ISO 2990:1974 Nitric acid for industrial use — Evaluation of the nitric acid concentration by measurement of density [Withdrawn without replacement]
- ISO 2991:1974 Nitric acid for industrial use — Determination of ammoniacal nitrogen content — Spectrophotometric method [Withdrawn without replacement]
- ISO 2992:1974 Ammonium sulphate for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method
- ISO 2993:1974 Ammonium sulphate for industrial use — Determination of free acidity — Titrimetric method
- ISO 2994:1974 Ammonium sulphate for industrial use — Determination of matter insoluble in water — Gravimetric method [Withdrawn without replacement]
- ISO 2995:1974 Ammonium nitrate for industrial use — Determination of matter insoluble in water — Gravimetric method [Withdrawn without replacement]
- ISO 2996:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of particle size distribution by mechanical sieving [Withdrawn without replacement]
- ISO 2997:1974 Phosphoric acid for industrial use — Determination of sulphate content — Method by reduction and titrimetry
- ISO 2998:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of orthophosphate content — Photometric method using the reduced molybdophosphate [Withdrawn without replacement]
- ISO 2999:1974 Sodium pyrophosphate for industrial use — Estimation of pyrophosphate content — Potentiometric method [Withdrawn without replacement]
- ISO 3000:1974 Sodium tripolyphosphate for industrial use — Estimation of tripolyphophate content — Tris(ethylenediamine) cobalt (III) chloride gravimetric method [Withdrawn without replacement]
- ISO 3001:1999 Plastics — Epoxy compounds — Determination of epoxy equivalent
- ISO 3002 Basic quantities in cutting and grinding
- ISO 3002-1:1982 Part 1: Geometry of the active part of cutting tools – General terms, reference systems, tool and working angles, chip breakers
- ISO 3002-2:1982 Part 2: Geometry of the active part of cutting tools – General conversion formulae to relate tool and working angles
- ISO 3002-3:1984 Part 3: Geometric and kinematic quantities in cutting
- ISO 3002-4:1984 Part 4: Forces, energy, power
- ISO 3002-5:1989 Part 5: Basic terminology for grinding processes using grinding wheels
- ISO 3003:1974 Dried-milk borers [Withdrawn: replaced with ISO 707]
- ISO 3004 Light gauge metal containers — Capacities and related cross-sections
- ISO 3004-1:1986 Part 1: Open-top cans for general food [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
- ISO 3004-2:1989 Part 2: Open-top cans for meat and products containing meat for human consumption [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
- ISO 3004-3:1986 Part 3: Open-top cans for drinks
- ISO 3004-4:1986 Part 4: Open-top cans for edible oil [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
- ISO 3004-5:1988 Part 5: Open-top cans for fish and other fishery products [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
- ISO 3004-6:1986 Part 6: Open-top cans for milk [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
- ISO 3005:1978 Textiles — Determination of dimensional change of fabrics induced by free-steam
- ISO 3006:2015 Road vehicles — Passenger car wheels for road use — Test methods
- ISO 3007:1999 Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
- ISO 3008 Fire resistance tests — Door and shutter assemblies
- ISO 3008-1:2019 Part 1: General requirements
- ISO 3008-2:2017 Part 2: Lift landing door assemblies
- ISO 3008-3:2016 Part 3: Door and shutter assemblies horizontally oriented
- ISO 3008-4:2021 Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction
- ISO 3009:2003 Fire-resistance tests — Elements of building construction — Glazed elements
- ISO 3010:2017 Bases for design of structures — Seismic actions on structures
- ISO 3011:2021 Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
- ISO 3012:1999 Petroleum products — Determination of thiol (mercaptan) sulfur in light and middle distillate fuels — Potentiometric method
- ISO 3013:1997 Petroleum products — Determination of the freezing point of aviation fuels
- ISO 3014:1993 Petroleum products — Determination of the smoke point of kerosine
- ISO 3015:2019 Petroleum and related products from natural or synthetic sources — Determination of cloud point
- ISO 3016:2019 Petroleum and related products from natural or synthetic sources — Determination of pour point
- ISO 3017:1981 Abrasive discs — Designation, dimensions and tolerances — Selection of disc outside diameter/centre hole diameter combinations [Withdrawn: replaced with ISO 21950]
- ISO 3018:1974 Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions
- ISO 3019 Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors
- ISO 3019-1:2001 Part 1: Inch series shown in metric units
- ISO 3019-2:2001 Part 2: Metric series
- ISO 3019-3:1988 Part 3: Polygonal flanges (including circular flanges) [Withdrawn: replaced with ISO 3019-2:2001]
- ISO/AWI 3020 Agricultural tractors and self-propelled sprayers — Protection of the Operator (driver) against hazardous substances [Under development; originally planned ISO 3020 Test conditions for box type vertical drilling machines — Testing of the accuracy — Practical test became ISO 2772-2]
- ISO 3020-1 Part 1: Terminology and overview [Under development]
- ISO 3020-2 Part 2: Cab and HVAC design concepts [Under development]
- ISO 3020-3 Part 3: Classification, requirements and test procedures [Under development]
- ISO 3020-4 Part 4: Filters – Requirements and test procedures [Under development]
- ISO 3020-5 Part 5: System validation [Under development]
- ISO 3021 Adventure tourism — Hiking and trekking activities — Requirements and recommendations [Under development]
- ISO 3022:1988 Cinematography — 35 mm motion-picture film perforated 16 mm (1-3-0) — Cutting and perforating dimensions
- ISO 3023:1995 Cinematography — 65 mm and 70 mm unexposed motion-picture film — Cutting and perforating dimensions
- ISO 3024:1983 Cinematography — Motion-picture camera cartridge, 8 mm type S, model 1 — Camera run length, perforation cut-out and end-of-run notch in film — Specifications
- ISO 3025:1974 Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model II — Film load position [Withdrawn without replacement]
- ISO 3026:1992 Cinematography — Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667) — Position and dimensions
- ISO 3027:1984 Cinematography — Magnetic stripes and recording head gaps for sound record on 8 mm Type S motion-picture films — Position and width dimensions [Withdrawn without replacement]
- ISO 3028:1984 Photography — Camera flash illuminants — Determination of ISO spectral distribution index (ISO/SDI)
- ISO 3029:1995 Photography – 126-size cartridges – Dimensions of cartridge, film and backing paper [Withdrawn without replacement]
- ISO 3030:2022 Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions and tolerances
- ISO 3031:2021 Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO 3032 Test conditions for pillar type vertical drilling machines — Testing of the accuracy [Draft numbered ISO 2773-2]
- ISO 3033 Oil of spearmint
- ISO 3033-1:2005 Part 1: Native type (Mentha spicata L.)
- ISO 3033-2:2005 Part 2: Chinese type (80% and 60%) (Mentha viridis L. var. crispa Benth.), redistilled oil
- ISO 3033-3:2005 Part 3: Indian type (Mentha spicata L.), redistilled oil
- ISO 3033-4:2005 Part 4: Scotch variety (Mentha x gracilis Sole)
- ISO 3034:2011 Corrugated fibreboard — Determination of single sheet thickness
- ISO 3035:2011 Corrugated fibreboard — Determination of flat crush resistance
- ISO 3036:1975 Board — Determination of puncture resistance
- ISO 3037:2013 Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
- ISO 3038:1975 Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion
- ISO 3039:2010 Corrugated fibreboard — Determination of grammage of the component papers after separation
- ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
- ISO 3041:1975 Welding requirements — Categories of service requirements for welded joints [Withdrawn without replacement]
- ISO 3042:1992 Cinematography — Labelling of containers for raw-stock motion-picture films and magnetic films — Minimum information specifications
- ISO 3043:1975 Oil of pimento berry [Withdrawn without replacement]
- ISO 3044:2020 Essential oil of Corymbia citriodora (Hook.) K.D. Hill and L.A.S. Johnson (syn. Eucalyptus citriodora Hook.)
- ISO 3045:2004 Oil of bay [Pimenta racemosa (Mill.) J.W. Moore]
- ISO 3046 Reciprocating internal combustion engines – Performance
- ISO 3046-1:2002 Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use
- ISO 3046-2:1987 Part 2: Test methods [Withdrawn: replaced with ISO 3046-1:2002]
- ISO 3046-3:2006 Part 3: Test measurements
- ISO 3046-4:2009 Part 4: Speed governing
- ISO 3046-5:2001 Part 5: Torsional vibrations
- ISO 3046-6:2020 Part 6: Overspeed protection
- ISO 3046-7:1995 Part 7: Codes for engine power [Withdrawn: replaced with ISO 3046-1:2002]
- ISO 3047:1982 Cinematography — Spool, daylight loading type, for 35 mm motion-picture cameras (capacity 30 m – 100 ft) — Dimensions
- ISO 3048:1974 Gypsum plasters — General test conditions [Withdrawn without replacement]
- ISO 3049:1974 Gypsum plasters — Determination of physical properties of powder [Withdrawn without replacement]
- ISO 3051:1974 Gypsum plasters — Determination of mechanical properties [Withdrawn without replacement]
- ISO 3052:1974 Gypsum plasters — Determination of water of crystallization content [Withdrawn without replacement]
- ISO 3053:2004 Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
- ISO 3054:2017 Essential oil of lavandin Abrial (Lavandula angustifolia Mill. × Lavandula latifolia Medik.), French type
- ISO 3055:2021 Kitchen equipment — Coordinating sizes
- ISO 3056:1986 Non-calibrated round steel link lifting chain and chain slings — Use and maintenance
- ISO 3057:1998 Non-destructive testing — Metallographic replica techniques of surface examination
- ISO 3058:1998 Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers
- ISO 3059:2012 Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
- ISO 3060:1974 Textiles — Cotton fibres — Determination of breaking tenacity of flat bundles
- ISO 3061:2008 Oil of black pepper (Piper nigrum L.)
- ISO 3062:1974 Oil of sandalwood (Eucarya spicata), Australia [Withdrawn without replacement]
- ISO 3063:2004 Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
- ISO 3064:2015 Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.))
- ISO 3065:2021 Essential oil of Eucalyptus, Australian type
- ISO 3066:1986 Duplicating machines — Registration [Withdrawn without replacement]
- ISO 3067:1983 Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model I — Notches for film speed, film identification and colour-balancing filter — Dimensions and positions [Withdrawn without replacement]
- ISO 3068:1982 Cinematography — Magnetic stripes for sound records on 16 mm motion-picture film perforated 8 mm Type S-2R (1-4) and (1-3) — Positions and width dimensions [Withdrawn without replacement]
- ISO 3069:2000 End-suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing
- ISO 3070 Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle
- ISO 3070-0:1982 Part 0: Introduction [Withdrawn: replaced with ISO 3070-(1-3):2007]
- ISO 3070-1:2007 Part 1: Machines with fixed column and movable table
- ISO 3070-2:2016 Part 2: Machines with movable column along the X-axis (floor type)
- ISO 3070-3:2007 Part 3: Machines with movable column and movable table
- ISO 3071:2020 Textiles — Determination of pH of aqueous extract
- ISO 3072:1975 Wool — Determination of solubility in alkali
- ISO 3073:1975 Wool — Determination of acid content
- ISO 3074:2014 Wool — Determination of dichloromethane-soluble matter in combed sliver
- ISO 3075:1980 Short link chain for lifting purposes — Grade S (6) non calibrated, for chain slings etc. [Withdrawn without replacement]
- ISO 3076:2012 Round steel short link chains for general lifting purposes — Medium tolerance sling chains for chain slings — Grade 8
- ISO 3077:2001 Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain
- ISO 3078:2016 Shipbuilding — Cargo winches
- ISO 3079 A two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions [Under development]
- ISO 3080:1974 Guide for the mechanical balancing of marine main steam turbine machinery for merchant service [Withdrawn without replacement]
- ISO 3081:1986 Iron ores — Increment sampling — Manual method [Withdrawn: replaced with ISO 3082]
- ISO 3082:2017 Iron ores – Sampling and sample preparation procedures
- ISO 3083:1986 Iron ores — Preparation of samples — Manual method [Withdrawn: replaced with ISO 3082]
- ISO 3084:1998 Iron ores — Experimental methods for evaluation of quality variation
- ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
- ISO 3086:2006 Iron ores — Experimental methods for checking the bias of sampling
- ISO 3087:2020 Iron ores — Determination of the moisture content of a lot
- ISO 3088:1975 Welding requirements — Factors to be considered in specifying requirements for fusion welded joints in steel (technical influencing factors) [Withdrawn without replacement]
- ISO 3089:2005 Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws
- ISO 3090:1974 Ropes and cordage — Netting yarns — Determination of change in length after immersion in water [Withdrawn without replacement]
- ISO 3091:1975 Meat and meat products — Determination of nitrate content (Reference method)
- ISO/CIE 3092 Light and lighting – Energy performance of lighting in buildings – Explanation and justification of ISO/CIE 20086 [Under development]
- ISO 3093:2009 Wheat, rye and their flours, durum wheat and durum wheat semolina — Determination of the falling number according to Hagberg-Perten
- ISO 3094:1974 Fruit and vegetable products — Determination of copper content — Photometric method [Withdrawn without replacement]
- ISO 3095:2013 Acoustics – Railway applications – Measurement of noise emitted by railbound vehicles
- ISO 3096:2018 Rolling bearings — Needle rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO/R 3097:1974 Rolling bearings — Needle rollers — Light and medium series — Dimensions and tolerance values [Withdrawn: replaced with ISO 1206]
- ISO 3098 Technical product documentation – Lettering
- ISO 3098-1:2015 Part 1: General requirements
- ISO 3098-2:2000 Part 2: Latin alphabet, numerals and marks
- ISO 3098-3:2000 Part 3: Greek alphabet
- ISO 3098-4:2000 Part 4: Diacritical and particular marks for the Latin alphabet
- ISO 3098-5:1997 Part 5: CAD lettering of the Latin alphabet, numerals and marks
- ISO 3098-6:2000 Part 6: Cyrillic alphabet
- ISO 3099:1974 Oilseed residues — Determination of total nitrogen content [Withdrawn without replacement]
- ISO 3100 Meat and meat products — Sampling and preparation of test samples
- ISO 3100-1:1991 Part 1: Sampling [Withdrawn: replaced with ISO 17604]
- ISO 3100-2:1998 Part 2: Preparation of test samples for microbiological examination [Withdrawn: replaced with ISO 6887-2]
- ISO 3101:1981 Wheels and castors — Triangular top plates with three fixing holes [Withdrawn: replaced with ISO 22883 and ISO 22884]
- ISO 3102:1981 Wheels and castors for non-powered equipment — Off-set for swivel castors [Withdrawn: replaced with ISO 22883 and ISO 22884]
- ISO 3103 Tea – Preparation of liquor for use in sensory tests
- ISO 3104:2020 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
- ISO 3105:1994 Glass capillary kinematic viscometers – Specifications and operating instructions
- ISO 3106:1974 Dental zinc oxide/eugenol filling materials [Withdrawn: replaced with ISO 3107]
- ISO 3107:2011 Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements
- ISO 3108:2017 Steel wire ropes — Test method — Determination of measured breaking force
- ISO 3109:1984 Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws [Withdrawn: replaced with ISO 2351-3]
- ISO 3110:1975 Copper alloys — Determination of aluminium as alloying element — Volumetric method [Withdrawn without replacement]
- ISO 3111:1975 Copper alloys — Determination of tin as alloying element — Volumetric method [Withdrawn without replacement]
- ISO 3112:1975 Copper and copper alloys — Determination of lead — Extracting titration method [Withdrawn without replacement]
- ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
- ISO 3115:1981 Castings in magnesium alloys containing zirconium — Chemical composition and mechanical properties [Withdrawn: replaced with ISO 16220]
- ISO 3116:2019 Magnesium and magnesium alloys — Wrought magnesium and magnesium alloys
- ISO 3117:1977 Tangential keys and keyways [Withdrawn without replacement]
- ISO 3118:1976 Sodium perborates for industrial use — Determination of particle size distribution by mechanical sieving [Withdrawn without replacement]
- ISO 3119:1976 Boric acid, boric oxide and disodium tetraborates for industrial use — Determination of chromium content — Diphenylcarbazide photometric method [Withdrawn without replacement]
- ISO 3120:1976 diSodium tetraborates and crude sodium borates for industrial use — Determination of water content — Gravimetric method [Withdrawn without replacement]
- ISO 3121:1976 Boric acid, boric oxide and disodium tetraborates for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
- ISO 3122:1976 Boric acid, boric oxide, disodium tetraborates, sodium perborates and crude borates for industrial use — Determination of iron content — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 3123:1976 Sodium perborates for industrial use — Determination of rate of solution — Conductivity method [Withdrawn without replacement]
- ISO 3124:1976 Crude sodium borates for industrial use — Determination of iron soluble in alkaline medium — 2,2′- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 3125:1976 Crude sodium borates for industrial use — Determination of aluminium soluble in alkaline medium — EDTA titrimetric method [Withdrawn without replacement]
- ISO 3126:2005 Plastics piping systems — Plastics components — Determination of dimensions
- ISO 3127:1994 Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
- ISO 3129:2019 Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
- ISO 3130:1975 Wood — Determination of moisture content for physical and mechanical tests [Withdrawn: replaced with ISO 13061-1]
- ISO 3131:1975 Wood — Determination of density for physical and mechanical tests [Withdrawn: replaced with ISO 13061-2]
- ISO 3132:1975 Wood — Testing in compression perpendicular to grain [Withdrawn: replaced with ISO 13061-5]
- ISO 3133:1975 Wood — Determination of ultimate strength in static bending [Withdrawn: replaced with ISO 13061-3]
- ISO 3134 Light metals and their alloys — Terms and definitions
- ISO 3134-1:1985 Part 1: Materials [Withdrawn without replacement]
- ISO 3134-2:1985 Part 2: Unwrought products [Withdrawn without replacement]
- ISO 3134-3:1985 Part 3: Wrought products [Withdrawn without replacement]
- ISO 3134-4:1985 Part 4: Castings [Withdrawn without replacement]
- ISO 3134-5:1981 Part 5: Methods of processing and treatment [Withdrawn without replacement]
- ISO 3136:1983 Rubber latex — Styrene-butadiene — Determination of bound styrene content
- ISO 3137:1974 Anhydrous hydrogen fluoride for industrial use — Sampling
- ISO 3138:1974 Anhydrous hydrogen fluoride for industrial use — Determination of non-volatile acid content — Titrimetric method [Withdrawn without replacement]
- ISO 3139:1976 Aqueous hydrofluoric acid for industrial use — Sampling and methods of test
- ISO 3140:2019 Essential oil of sweet orange expressed [Citrus sinensis (L.)]
- ISO 3141:1997 Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
- ISO 3142:1997 Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
- ISO 3143:1997 Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
- ISO 3144:1974 Carbon disulphide for industrial use — Sampling and methods of test
- ISO 3145:1974 Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars [Withdrawn: replaced with ISO 9628]
- ISO 3146:2000 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
- ISO 3147:1975 Heat exchangers — Verification of thermal balance of water-fed or steam-fed primary circuits — Principles and test requirements [Withdrawn without replacement]
- ISO 3148:1975 Radiators, convectors and similar appliances — Determination of thermal output — Test method using air-cooled closed booth [Withdrawn without replacement]
- ISO 3149:1975 Radiators, convectors and similar appliances — Determination of thermal output — Test method using liquid-cooled closed booth [Withdrawn without replacement]
- ISO 3150:1975 Radiators, convectors and similar appliances — Calculation of thermal output and presentation of results [Withdrawn without replacement]
- ISO/TR 3151 Visualization elements of PLM-MES interface [Under development; originally planned ISO 3151 was an engineering standard][3]
- ISO/TR 3151-1 Part 1: Overview [Under development]
- ISO/TR 3152:2022 Road vehicles — Comparison between ISO 26262-12 and other parts of the ISO 26262 series to support motorcycle adaptation
- ISO 3154:1988 Stranded wire ropes for mine hoisting — Technical delivery requirements
- ISO 3155:1976 Stranded wire ropes for mine hoisting — Fibre components — Characteristics and tests
- ISO 3156:1976 Stranded wire ropes for mine hoisting — Impregnating compounds, lubricants and service dressings — Characteristics and tests
- ISO 3157:1991 Radioluminescence for time measurement instruments — Specifications [Withdrawn without replacement]
- ISO 3158:1976 Timekeeping instruments — Symbolization of control positions
- ISO 3159:2009 Timekeeping instruments — Wrist-chronometers with spring balance oscillator
- ISO 3160 Watch-cases and accessories — Gold alloy coverings
- ISO 3160-1:1998 Part 1: General requirements
- ISO 3160-2:2015 Part 2: Determination of fineness, thickness, corrosion resistance and adhesion
- ISO 3160-3:1993 Part 3: Abrasion resistance tests of a type of coating on standard gauges [Withdrawn: replaced with ISO 23160]
- ISO 3161:1999 Aerospace — UNJ threads — General requirements and limit dimensions
- ISO 3162:1974 Caravans and light trailers — Couplings for vacuum braking systems — Dimensional characteristics [Withdrawn without replacement]
- ISO 3163 Adventure tourism — Terminology [Under development’ original draft unknown]
- ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
- ISO 3165:1976 Sampling of chemical products for industrial use — Safety in sampling
- ISO 3166 Codes for the representation of names of countries and their subdivisions
- ISO 3166-1:2020 Part 1: Country codes
- ISO 3166-2:2020 Part 2: Country subdivision code
- ISO 3166-3:2020 Part 3: Code for formerly used names of countries
- ISO 3167:2014 Plastics — Multipurpose test specimens
- ISO 3168:1998 Aerospace — Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3169 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry [Under development]
- ISO 3170:2004 Petroleum liquids — Manual sampling
- ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
- ISO/TR 3172:1974 Paints and varnishes — Large scale brushing test [Withdrawn without replacement]
- ISO 3173:1974 Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines operating under steady state conditions [Withdrawn: replaced with ISO 11614]
- ISO 3174:1994 Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type
- ISO 3175 Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments
- ISO 3175-1:2017 Part 1: Assessment of performance after cleaning and finishing
- ISO 3175-2:2017 Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene
- ISO 3175-3:2017 Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents
- ISO 3175-4:2018 Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning
- ISO 3175-5:2019 Part 5: Procedure for testing performance when cleaning and finishing using dibutoxymethane
- ISO 3175-6:2017 Part 6: Procedure for testing performance when cleaning and finishing using decamethylpentacyclosiloxane
- ISO 3176 Textiles — Determination of dimensional stability on dry cleaning in perchloroethylene, excluding finishing laboratory method [Rejected draft]
- ISO 3177:1975 Potassium hydroxide for industrial use — Determination of chlorides content — Photometric method [Withdrawn without replacement]
- ISO 3178:1988 Steel wire ropes for general purposes — Terms of acceptance [Withdrawn without replacement]
- ISO 3179:1974 Coniferous sawn timber — Nominal dimensions [Withdrawn without replacement]
- ISO 3180 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of hydroxyapatite powders [Under development; originally planned ISO 3180 merged into ISO 3179]
- ISO 3181 [draft merged into ISO 3179]
- ISO 3182 Light Measuring System for Smoke Emission Testing [Under development; originally planned ISO 3182 merged into ISO 3179]
- ISO 3183:2019 Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
- ISO 3184:1998 Reach and straddle fork-lift trucks — Stability tests [Withdrawn: replaced with ISO 22915-3]
- ISO 3185:2021 Aerospace — Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
- ISO 3186:2008 Aerospace — Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa — Dimensions
- ISO 3187:1989 Refractory products — Determination of creep in compression
- ISO 3188:1978 Starches and derived products — Determination of nitrogen content by the Kjeldahl method — Titrimetric method
- ISO 3189 Sockets for wire ropes for general purposes
- ISO 3189-1:1985 Part 1: General characteristics and conditions of acceptance [Withdrawn without replacement]
- ISO 3189-2:1985 Part 2: Special requirements for sockets produced by forging or machined from the solid [Withdrawn without replacement]
- ISO 3189-3:1985 Part 3: Special requirements for sockets produced by casting [Withdrawn without replacement]
- ISO 3190:1975 Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle — Testing of the accuracy
- ISO 3191:1998 Aerospace — Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3193:2008 Aerospace — Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
- ISO 3194:1975 Potassium hydroxide for industrial use — Determination of sulphur compounds — Method by reduction and titrimetry [Withdrawn without replacement]
- ISO 3195:1975 Sodium hydroxide for industrial use — Sampling — Test Sample — Preparation of the main solution for carrying out certain determinations
- ISO 3196:1975 Sodium hydroxide for industrial use — Determination of carbonates content — Titrimetric method
- ISO 3197:1975 Sodium hydroxide for industrial use — Determination of chlorides content — Photometric method [Withdrawn without replacement]
- ISO 3198:1975 Sodium hydroxide for industrial use — Determination of sulphur compounds — Method by reduction and titrimetry [Withdrawn without replacement]
- ISO 3199:1975 Sodium chlorate for industrial use — Determination of chlorate content — Dichromate titrimetric method
- ISO 3200:1975 Sodium and potassium silicates for industrial use — Determination of sulphates content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 3201:1975 Sodium and potassium silicates for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 3202:1997 Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
- ISO 3203:1993 Aerospace — Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
- ISO 3205:1976 Preferred test temperatures [Withdrawn without replacement]
- ISO 3206:1975 Surface active agents — Analysis of technical alkane sulphonates — Determination of alkane monosulphonates content [Withdrawn without replacement]
- ISO 3207:1975 Statistical interpretation of data — Determination of a statistical tolerance interval [Withdrawn: replaced with ISO 16269-6]
- ISO 3208:1974 Road vehicles — Evaluation of protrusions inside passenger cars
- ISO 3209:2016 Aerospace — Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3210:2017 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
- ISO 3211:2018 Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
- ISO 3212:1975 Polypropylene pipes — Burst test requirements [Withdrawn without replacement]
- ISO 3213:2009 Polypropylene (PP) pipes — Effect of time and temperature on the expected strength
- ISO 3214:2000 Oil of Litsea cubeba (Litsea cubeba Pers.)
- ISO 3215:1998 Oil of nutmeg, Indonesian type (Myristica fragrans Houtt.)
- ISO 3216:1997 Oil of cassia, Chinese type (Cinnamomum aromaticum Nees, syn. Cinnamomum cassia Nees ex Blume)
- ISO 3217:1974 Oil of lemongrass (Cymbopogon citratus)
- ISO 3218:2014 Essential oils — Principles of nomenclature
- ISO 3219 Rheology
- ISO 3219-1:2021 Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
- ISO 3219-2:2021 Part 2: General principles of rotational and oscillatory rheometry
- ISO 3220:1975 Copper and copper alloys — Determination of arsenic — Photometric method
- ISO 3221:1998 Aerospace — Nuts, anchor, self-locking, fixed, 90 degrees corner, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3222:1998 Aerospace — Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3223:1998 Aerospace — Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3224:1998 Aerospace — Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3225:1998 Aerospace — Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
- ISO 3228:2013 Rolling bearings — Cast and pressed housings for insert bearings — Boundary dimensions and tolerances
- ISO 3230:1998 Aerospace — Rivets, solid, 100 degrees normal countersunk head with dome, metallic material, with or without surface treatment — Dimensions
- ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide [Withdrawn: replaced with ISO 22479]
- ISO 3232:1974 Paints and varnishes — Determination of quantity of material in a container [Withdrawn without replacement]
- ISO 3233 Paints and varnishes — Determination of percentage volume of non-volatile matter
- ISO 3233-1:2019 Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes’ principle
- ISO 3233-2:2019 Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes’ principle
- ISO 3233-3:2015 Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
- ISO 3234:1975 Sodium sulphate for industrial use — Determination of loss in mass at 110 degrees C [Withdrawn without replacement]
- ISO 3235:1975 Sodium sulphate for industrial use — Determination of acid-insoluble matter [Withdrawn without replacement]
- ISO 3236:1975 Sodium sulphate for industrial use — Determination of chlorides content — Mercurimetric method [Withdrawn without replacement]
- ISO 3237:1975 Sodium sulphate for industrial use — Determination of sulphates content — Calculation method and barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 3238:1975 Sodium sulphate for industrial use — Determination of calcium content — EDTA complexometric method [Withdrawn without replacement]
- ISO 3239:1975 Sodium sulphate for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 3240:1975 Sodium sulphate for industrial use — Determination of acidity or alkalinity [Withdrawn without replacement]
- ISO 3241:1975 Sodium sulphate for industrial use — Measurement of pH — Potentiometric method [Withdrawn without replacement]
- ISO 3242 Blockchain and distributed ledger technologies – Use cases [Under development]
- ISO 3243:1975 Keyboards for countries whose languages have alphabetic extenders — Guidelines for harmonization [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 3244:1984 Office machines and data processing equipment — Principles governing the positioning of control keys on keyboards [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 3245:2015 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO 3246:1977 Dentistry — Working space of the dentist — Definitions and principles [Withdrawn without replacement]
- ISO 3247 Mosaic parquet panels — Classification of oak strips [Rejected draft]
- ISO 3248:2016 Paints and varnishes — Determination of the effect of heat
- ISO 3249:1975 Reciprocating internal combustion engines — Definitions of locations on an engine [Withdrawn: replaced with ISO 1204]
- ISO/TS 3250:2021 Petroleum, petrochemical and natural gas industries — Calculation and reporting production efficiency in the operating phase [Original draft with this number unknown]
- ISO 3251:2019 Paints, varnishes and plastics — Determination of non-volatile-matter content
- ISO 3252:2019 Powder metallurgy – Vocabulary
- ISO 3253:1998 Gas welding equipment — Hose connections for equipment for welding, cutting and allied processes [Withdrawn: replaced with ISO/TR 28821]
- ISO 3254:1989 Shipbuilding and marine structures — Toughened safety glass panes for rectangular windows [Withdrawn: replaced with ISO 21005]
- ISO 3255:1974 Magnesium and magnesium alloys — Determination of aluminium — Chromazurol S photometric method
- ISO 3256:1977 Aluminium and aluminium alloys — Determination of magnesium — Atomic absorption spectrophotometric method
- ISO 3257:1992 Rubber compounding ingredients — Carbon black — Method of evaluation in styrene-butadiene rubbers [Withdrawn without replacement]
- ISO 3258:1976 Air distribution and air diffusion — Vocabulary [Withdrawn without replacement]
- ISO 3259 Pulps — Determination of pentosans content — Furfural method [Rejected draft]
- ISO 3260:2015 Pulps — Determination of chlorine consumption (Degree of delignification)
- ISO 3261:1975 Fire tests — Vocabulary [Withdrawn without replacement]
- ISO 3262 Extenders — Specifications and methods of test
- ISO 3262-1:2020 Part 1: Introduction and general test methods
- ISO 3262-2:1998 Part 2: Barytes (natural barium sulfate)
- ISO 3262-3:1998 Part 3: Blanc fixe
- ISO 3262-4:1998 Part 4: Whiting
- ISO 3262-5:1998 Part 5: Natural crystalline calcium carbonate
- ISO 3262-6:1998 Part 6: Precipitated calcium carbonate
- ISO 3262-7:1998 Part 7: Dolomite
- ISO 3262-8:1998 Part 8: Natural clay
- ISO 3262-9:1997 Part 9: Calcined clay
- ISO 3262-10:2000 Part 10: Natural talc/chlorite in lamellar form
- ISO 3262-11:2000 Part 11: Natural talc, in lamellar form, containing carbonates
- ISO 3262-12:2001 Part 12: Muscovite-type mica
- ISO 3262-13:1997 Part 13: Natural quartz (ground)
- ISO 3262-14:2000 Part 14: Cristobalite
- ISO 3262-15:2000 Part 15: Vitreous silica
- ISO 3262-16:2000 Part 16: Aluminium hydroxides
- ISO 3262-17:2000 Part 17: Precipitated calcium silicate
- ISO 3262-18:2000 Part 18: Precipitated sodium aluminium silicate
- ISO 3262-19:2021 Part 19: Precipitated silica
- ISO 3262-20:2021 Part 20: Fumed silica
- ISO 3262-21:2000 Part 21: Silica sand (unground natural quartz)
- ISO 3262-22:2000 Part 22: Flux-calcined kieselguhr
- ISO 3263:1974 Continuous mechanical handling equipment for loose bulk materials — Bucket elevators — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3264:1974 Continuous mechanical handling equipment for loose bulk materials — Screw feeders and conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3265:1974 Continuous mechanical handling equipment for loose bulk materials — Wagon tipplers handling rail-borne wagons (rotary, side discharge and end discharge) — Safety code
- ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes
- ISO 3267:1991 Road vehicles — Headlamp cleaners [Withdrawn without replacement]
- ISO 3268:1978 Plastics — Glass reinforced materials — Determination of tensile properties [Withdrawn: replaced with ISO 527-(4-5)]
- ISO 3269:2019 Fasteners — Acceptance inspection
- ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
- ISO 3271:2015 Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices
- ISO 3272 Microfilming of technical drawings and other drawing office documents
- ISO 3272-1:2003 Part 1: Operating procedures
- ISO 3272-2:1994 Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
- ISO 3272-3:2001 Part 3: Aperture card for 35 mm microfilm
- ISO 3272-4:1994 Part 4: Microfilming of drawings of special and exceptional elongated sizes
- ISO 3272-5:1999 Part 5: Test procedures for diazo duplicating of microfilm images in aperture cards [Withdrawn without replacement]
- ISO 3272-6:2000 Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
- ISO 3273 Transparent A6 Microfiche – Additional physical characteristics [Rejected draft]
- ISO 3274:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Nominal characteristics of contact (stylus) instruments
- ISO 3275:1974 Information processing – Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange
- ISO 3276:1975 Continuous mechanical handling equipment for unit loads — Belt conveyors (canvas, rubber, plastic, etc.), steel band conveyors and wire mesh belt conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3277:1974 Continuous mechanical handling equipment for unit loads — Suspended swing-tray conveyors and fixed-tray conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3278:1974 Continuous mechanical handling equipment for unit loads — Canvas-sling elevators and conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3279:1974 Continuous mechanical handling equipment for unit loads — Hydraulic conveyors — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3280:1974 Continuous mechanical handling equipment for unit loads — Gravity roller and wheel conveyors, extensible-roller or telescopic-roller conveyors, and hinged-roller conveyors (gates) — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3281:1974 Continuous mechanical handling equipment for unit loads — Spiral roller conveyor chutes, spiral chutes, and chutes for packages — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3282:1976 Aircraft — Dimensions for single-hole and triple-hole mounting (Class 3) lever-operated manual switches
- ISO 3283:1974 Continuous mechanical handling equipment — Transfer points — Safety code [Withdrawn: replaced with ISO 7149]
- ISO 3284:1974 Continuous mechanical handling equipment for loose bulk materials — Dimensions of bends for use in pneumatic handling
- ISO 3285:1986 Road vehicles — Ignition coil mounting brackets [Withdrawn without replacement]
- ISO 3286:2016 Single point cutting tools — Corner radii
- ISO 3287:1999 Powered industrial trucks – Symbols for operator controls and other displays
- ISO 3288 Individual space heating appliances — General test methods [Rejected draft]
- ISO 3289 Independent room heaters burnings solid fuel — Particular test methods [Rejected draft]
- ISO 3290 Rolling bearings — Balls
- ISO 3290-1:2014 Part 1: Steel balls
- ISO 3290-2:2014 Part 2: Ceramic balls
- ISO 3291:2016 Extra-long Morse taper shank twist drills
- ISO 3292:2016 Extra-long parallel shank twist drills
- ISO 3293:2016 Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
- ISO 3294:2016 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
- ISO 3295:1975 Narrow bandsaw blades for woodworking — Dimensions
- ISO 3296:1975 Textile machinery and accessories — Tubes for ring-spinning, doubling and twisting spindles, taper 1:64 [Withdrawn: replaced with ISO 368]
- ISO 3297:2020 Information and documentation – International standard serial number (ISSN)
- ISO 3298:1994 Photography — Processing chemicals — Specifications for glacial acetic acid
- ISO 3299:1994 Photography — Processing chemicals — Specifications for 1-phenyl-3-pyrazolidinone
- ISO 3300 – ISO 3649
- [edit]
- ISO 3300:1976 Photography — Processing chemicals — Specifications for anhydrous sodium thiosulfate [Withdrawn: replaced with ISO 10636]
- ISO 3301:1975 Statistical interpretation of data – Comparison of two means in the case of paired observations
- ISO 3302 Rubber — Tolerances for products
- ISO 3302-1:2014 Part 1: Dimensional tolerances
- ISO 3302-2:2008 Part 2: Geometrical tolerances
- ISO 3303 Rubber- or plastics-coated fabrics — Determination of bursting strength
- ISO 3303-1 Part 1: Steel-ball method
- ISO 3303-2 Part 2: Hydraulic method
- ISO 3304:1985 Plain end seamless precision steel tubes — Technical conditions for delivery [Withdrawn without replacement]
- ISO 3305:1985 Plain end welded precision steel tubes — Technical conditions for delivery
- ISO 3306:1985 Plain end as-welded and sized precision steel tubes — Technical conditions for delivery
- ISO 3307:1975 Information interchange – Representations of time of the day [Withdrawn: replaced by ISO 8601:1988]
- ISO 3308:2012 Routine analytical cigarette-smoking machine — Definitions and standard conditions
- ISO/IEC 3309:1993 Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Frame structure [Withdrawn: replaced by ISO/IEC 13239]
- ISO 3310 sieves — Technical requirements and testing
- ISO 3310-1:2016 Part 1: Test sieves of metal wire cloth
- ISO 3310-2:2013 Part 2: Test sieves of perforated metal plate
- ISO 3310-3:1990 Part 3: Test sieves of electroformed sheets
- ISO/TR 3311:1974 Plain end precision steel tubes, welded and seamless — General tables of dimensions and masses per unit length [Withdrawn: replaced by ISO 4200]
- ISO 3312:1987 Sintered metal materials and hardmetals — Determination of Young modulus
- ISO/TR 3313:2018 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
- ISO 3314:1975 Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
- ISO 3315:2018 Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests
- ISO 3316:2018 Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests
- ISO 3317:2015 Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
- ISO 3318:2016 Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads
- ISO 3319 Guide for the use of ISO 2859 “Sampling procedures and tables for inspection by attributes” [Rejected draft]
- ISO 3320:2013 Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
- ISO 3321:1975 Fluid power systems and components — Cylinder bores and piston rod diameters — Inch series [Withdrawn without replacement]
- ISO 3322:1985 Fluid power systems and components — Cylinders — Nominal pressures [Withdrawn without replacement]
- ISO 3323:1987 Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved
- ISO 3324 Aircraft tyres and rims
- ISO 3324-1:2013 Part 1: Specifications [Withdrawn without replacement]
- ISO 3324-2:2013 Part 2: Part 2: Test methods for tyres [Withdrawn without replacement]
- ISO 3325:1996 Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
- ISO 3326:2013 Hardmetals — Determination of (the magnetization) coercivity [Withdrawn without replacement]
- ISO 3327:2009 Hardmetals — Determination of transverse rupture strength
- ISO 3328:1975 Nitric acid for industrial use — Determination of sulphate content — Method by reduction and titrimetry [Withdrawn without replacement]
- ISO 3329:1975 Ammonium nitrate for industrial use — Determination of content of sulphur compounds — Method by reduction and titrimetry [Withdrawn without replacement]
- ISO 3330:1975 Ammonium nitrate for industrial use — Determination of ammoniacal nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
- ISO 3331:1975 Ammonium nitrate for industrial use — Determination of total nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
- ISO 3332:1975 Ammonium sulphate for industrial use — Determination of ammoniacal nitrogen content — Titrimetric method after distillation
- ISO 3333:1975 Ammonium sulphate for industrial use — Determination of copper content — Zinc dibenzyldithiocarbamate photometric method [Withdrawn without replacement]
- ISO 3334:2006 Micrographics — ISO resolution test chart No. 2 — Description and use
- ISO 3335:1977 Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties [Withdrawn: replaced with ISO 209-1]
- ISO 3336:1993 Dentistry — Synthetic polymer teeth [Withdrawn: replaced with ISO 22112]
- ISO 3337:2000 T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
- ISO 3338 Cylindrical shanks for milling cutters
- ISO 3338-1:1996 Part 1: Dimensional characteristics of plain cylindrical shanks
- ISO 3338-2:2013 Part 2: Dimensional characteristics of flatted cylindrical shanks
- ISO 3338-3:1996 Part 3: Dimensional characteristics of threaded shanks
- ISO 3339 Tractors and machinery for agriculture and forestry — Classification and terminology
- ISO 3339-0:1986 Part 0: Classification system and classification [Withdrawn without replacement]
- ISO 3340:1976 Fibre building boards — Determination of sand content
- ISO 3341:2000 Textile glass — Yarns — Determination of breaking force and breaking elongation
- ISO 3342:2011 Textile glass — Mats — Determination of tensile breaking force
- ISO 3343:2010 Reinforcement yarns — Determination of twist balance index
- ISO 3344:1997 Reinforcement products — Determination of moisture content
- ISO 3345:1975 Wood — Determination of ultimate tensile stress parallel to grain [Withdrawn: replaced with ISO 13061-6]
- ISO 3346:1975 Wood — Determination of ultimate tensile stress perpendicular to grain [Withdrawn: replaced with ISO 13061-7]
- ISO 3347:1976 Wood — Determination of ultimate shearing stress parallel to grain [Withdrawn: replaced with ISO 13061-8]
- ISO 3348:1975 Wood — Determination of impact bending strength [Withdrawn: replaced with ISO 13061-10]
- ISO 3349:1975 Wood — Determination of modulus of elasticity in static bending [Withdrawn: replaced with ISO 13061-4]
- ISO 3350:1975 Wood — Determination of static hardness [Withdrawn: replaced with ISO 13061-12]
- ISO 3351:1975 Wood — Determination of resistance to impact indentation [Withdrawn: replaced with ISO 13061-11]
- ISO/TR 3352:1974 Acoustics — Assessment of noise with respect to its effect on the intelligibility of speech [Withdrawn without replacement]
- ISO 3353 Aerospace — Lead and runout threads
- ISO 3353-1:2020 Part 1: Rolled external threads
- ISO 3353-2:2020 Part 2: Internal threads
- ISO 3354:2008 Measurement of clean water flow in closed conduits – Velocity-area method using current-meters in full conduits and under regular flow conditions
- ISO 3355:1975 Shoe sizes — System of length grading (for use in the Mondopoint system) [Withdrawn: replaced with ISO 9407]
- ISO 3356:2009 Milk — Determination of alkaline phosphatase
- ISO 3357:1975 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of total phosphorus(V) oxide content — Quinoline phosphomolybdate gravimetric method
- ISO 3358:1979 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Separation by column chromatography and determination of the different phosphate forms [Withdrawn without replacement]
- ISO 3359:1975 Phosphoric acid for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
- ISO 3360:1976 Phosphoric acid and sodium phosphates for industrial use (including foodstuffs) — Determination of fluorine content — Alizarin complexone and lanthanum nitrate photometric method
- ISO 3361:1975 Phosphoric acid for industrial use — Determination of soluble silica content — Reduced molybdosilicate spectrophotometric method [Withdrawn without replacement]
- ISO 3362:1976 Benzyl chloride for industrial use — Methods of test [Withdrawn without replacement]
- ISO 3363:1976 Fluorochlorinated hydrocarbons for industrial use — Determination of acidity — Titrimetric method
- ISO 3364:2017 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
- ISO 3365:2016 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
- ISO 3366:1999 Coated abrasives — Abrasive rolls
- ISO 3367:1975 Coated abrasives — Rolls for widths of 50 mm and greater — Any backing — Designation and dimensions [Withdrawn: replaced with ISO 3366]
- ISO 3368:1975 Coated abrasives — Cloth rolls up to and including 40 mm width — Designation and dimensions [Withdrawn: replaced with ISO 3366]
- ISO 3369:2006 Impermeable sintered metal materials and hardmetals — Determination of density
- ISO 3371:1975 Modular units for machine tool construction — Rotary tables and multi-sided centre bases for rotary tables
- ISO 3372:1975 Shipbuilding — Inland vessels — Mushroom-type ventilator heads [Withdrawn without replacement]
- ISO 3373 Fibre building boards — Determination of paint absorption [Rejected draft]
- ISO 3374:2000 Reinforcement products — Mats and fabrics — Determination of mass per unit area
- ISO 3375:2009 Textile glass — Determination of stiffness of rovings
- ISO 3376:2020 Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation
- ISO 3377 Leather — Physical and mechanical tests — Determination of tear load
- ISO 3377-1:2011 Part 1: Single edge tear
- ISO 3377-2:2016 Part 2: Double edge tear
- ISO 3378:2002 Leather — Physical and mechanical tests — Determination of resistance to grain cracking and grain crack index
- ISO 3379:2015 Leather — Determination of distension and strength of surface (Ball burst method)
- ISO 3380:2015 Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 °C
- ISO 3381:2021 Railway applications – Acoustics – Noise measurement inside railbound vehicles
- ISO 3382 Acoustics — Measurement of room acoustic parameters
- ISO 3382-1:2009 Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces
- ISO 3382-2:2008 Acoustics — Measurement of room acoustic parameters — Part 2: Reverberation time in ordinary rooms
- ISO 3382-3:2022 Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices
- ISO 3383:1985 Rubber — General directions for achieving elevated or subnormal temperatures for test purposes [Withdrawn: replaced with ISO 23529]
- ISO 3384 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression
- ISO 3384-1:2019 Part 1: Testing at constant temperature
- ISO 3384-2:2019 Part 2: Testing with temperature cycling
- ISO 3385:2014 Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
- ISO 3386 Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression
- ISO 3386-1:1986 Part 1: Low-density materials
- ISO 3386-2:1997 Part 2: High-density materials
- ISO 3387:2020 Rubber — Determination of crystallization effects by hardness measurements
- ISO 3388:1977 Patent documents — Bibliographic references — Essential and complementary elements [Withdrawn: replaced with ISO 690]
- ISO 3389:1975 Aircraft — Radio frequency flexible coaxial cables — Dimensions and electrical characteristics [Withdrawn without replacement]
- ISO 3390:1976 Aluminium oxide primarily used for the production of aluminium — Determination of manganese content — Flame atomic absorption method [Withdrawn without replacement]
- ISO 3391:1976 Cryolite, natural and artificial — Determination of calcium content — Flame atomic absorption method
- ISO 3392:1976 Cryolite, natural and artificial, and aluminium fluoride for industrial use — Determination of water content — Electrometric method [Withdrawn without replacement]
- ISO 3393:1976 Cryolite, natural and artificial, and aluminium fluoride for industrial use — Determination of moisture content — Gravimetric method
- ISO 3394:2012 Packaging – Complete, filled transport packages and unit loads – Dimensions of rigid rectangular packages
- ISO 3395:1975 Rotary drilling equipment — Roller bits and blade drag bits [Withdrawn without replacement]
- ISO 3396:1975 Rotary drilling equipment — Diamond drilling bits and diamond core bits [Withdrawn without replacement]
- ISO 3397:1977 Broadleaved wood raw parquet blocks — General characteristics
- ISO 3398:1977 Broadleaved wood raw parquet blocks — Classification of oak parquet blocks
- ISO 3399:1976 Broadleaved wood raw parquet blocks — Classification of beech parquet blocks
- ISO 3400:1997 Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method
- ISO 3401:1991 Cigarettes — Determination of alkaloid retention by the filters — Spectrometric method
- ISO 3402:1999 Tobacco and tobacco products — Atmosphere for conditioning and testing
- ISO 3405:2019 Petroleum and related products from natural or synthetic sources — Determination of distillation characteristics at atmospheric pressure
- ISO 3406:1975 Tobacco and tobacco products — Expression of analytical test results [Withdrawn without replacement]
- ISO 3407:1983 Information processing – Information interchange on 3,81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1 600 ftpi) [Withdrawn without replacement]
- ISO 3408 Ball screws
- ISO 3408-1:2006 Part 1: Vocabulary and designation
- ISO 3408-2:2021 Part 2: Nominal diameters, leads, nut dimensions and mounting bolts — Metric series
- ISO 3408-3:2006 Part 3: Acceptance conditions and acceptance tests
- ISO 3408-4:2006 Part 4: Static axial rigidity
- ISO 3408-5:2006 Part 5: Static and dynamic axial load ratings and operational life
- ISO 3409:1975 Passenger cars — Lateral spacing of foot controls
- ISO 3410:1989 Agricultural machinery — Endless variable-speed V-belts and groove sections of corresponding pulleys
- ISO 3411:2007 Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope
- ISO 3412:1992 Road vehicles — Screened and waterproof spark-plugs and their connections — Types 1A and 1B
- ISO 3413:1975 Information processing — Recorded magnetic tapes for interchange instrumentation applications — Standard tape speeds and track configurations [Withdrawn: replaced with ISO 6068]
- ISO 3414 Modular coordination — co-ordinating sizes for windows [Rejected draft]
- ISO 3415:1986 Textile floor coverings — Determination of thickness loss after brief, moderate static loading
- ISO 3416:1986 Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading
- ISO 3417:2008 Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter [Withdrawn: replaced with ISO 6502-2]
- ISO 3418:1975 Steel Tubes — Butt-welding bends, types 3D and 5D (45°, 90°, and 180°), without quality requirements [Withdrawn without replacement]
- ISO 3419:1981 Non-alloy and alloy steel butt-welding fittings
- ISO 3420:1975 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of ash — Gravimetric method [Withdrawn without replacement]
- ISO 3421 Petroleum and natural gas industries — Drilling and production equipment — Offshore conductor design, setting depth and installation [Under development]
- ISO 3422:1975 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of total carbon dioxide content — Titrimetric method [Withdrawn without replacement]
- ISO 3423:1975 Sulphuric acid and oleums for industrial use — Determination of sulphur dioxide content — Iodometric method
- ISO 3424:1975 Sodium perborates for industrial use — Determination of bulk density [Withdrawn without replacement]
- ISO 3425:1975 Sulphur for industrial use — Determination of ash at 850-900 degrees C and of residue at 200 degrees C
- ISO 3426:1975 Sulphur for industrial use — Determination of loss in mass at 80 degrees C
- ISO 3427:1976 Gaseous halogenated hydrocarbons (liquefied gases) — Taking of a sample
- ISO 3428:1976 Sodium fluoride for industrial use — Preparation and storage of test samples
- ISO 3429:1976 Sodium fluoride primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method
- ISO 3430:1976 Sodium fluoride primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method
- ISO 3431:1976 Sodium fluoride primarily used for the production of aluminium — Determination of soluble sulphates content — Turbidimetric method
- ISO 3432:2008 Cheese — Determination of fat content — Butyrometer for Van Gulik method
- ISO 3433:2008 Cheese — Determination of fat content — Van Gulik method
- ISO 3434:2012 Ships and marine technology — Heated glass panes for ships’ rectangular windows
- ISO 3435:1977 Continuous mechanical handling equipment — Classification and symbolization of bulk materials
- ISO 3437:1975 Road vehicles — Determination of fuel leakage in the event of a collision [Withdrawn without replacement]
- ISO 3438:2013 Subland twist drills for holes prior to tapping screw threads (originally Subland twist drills with Morse taper shanks for holes prior to tapping screw threads)
- ISO 3439:2003 Subland twist drills with cylindrical shanks for holes prior to tapping screw threads [Withdrawn: replaced with ISO 3438]
- ISO 3440 Twist drills with indexable inserts made of cemented carbide, with parallel shank, for metal and plastics [Rejected draft]
- ISO 3441 Twist drills with indexable inserts made of cemented carbide, with Morse taper shank, for metal and plastics [Rejected draft]
- ISO 3442 Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws
- ISO 3442-1:2005 Part 1: Manually operated chucks with tongue and groove type jaws
- ISO 3442-2:2005 Part 2: Power-operated chucks with tongue and groove type jaws
- ISO 3442-3:2007 Part 3: Power-operated chucks with serrated jaws
- ISO 3443 Tolerances for building
- ISO 3443-1:1979 Part 1: Basic principles for evaluation and specification
- ISO 3443-2:1979 Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes
- ISO 3443-3:1987 Part 3: Procedures for selecting target size and predicting fit
- ISO 3443-4:1986 Part 4: Method for predicting deviations of assemblies and for allocation of tolerances
- ISO 3443-5:1982 Part 5: Series of values to be used for specification of tolerances
- ISO 3443-6:1986 Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control — Method 1
- ISO 3443-7:1988 Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control — Method 2 (Statistical control method)
- ISO 3443-8:1989 Part 8: Dimensional inspection and control of construction work
- ISO 3444 Stainless steel wire ropes [Under development; originally planned ISO 3444 was Paper and board – Determination of abrasion resistance – Taber method]
- ISO/IEC TR 3445:2022 Information technology – Cloud computing – Audit of cloud services [Originally planned ISO 3445 was Modular coordination — Preferred sizes for horizontal controlling dimensions]
- ISO 3446 Timber Structures – Determination of characteristic values of sawn timber from tests on Small Clear Wood Specimens [Under development; originally planned ISO 3446 was Modular coordination — Preferred sizes for vertical controlling dimensions]
- ISO 3447:1975 Joints in building — General check-list of joint functions
- ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
- ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
- ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems
- ISO 3451 Plastics — Determination of ash
- ISO 3451-1:2019 Part 1: General methods
- ISO 3451-2:1998 Part 2: Poly(alkylene terephthalate) materials
- ISO 3451-3:1984 Part 3: Unplasticized cellulose acetate
- ISO 3451-4:1998 Part 4: Polyamides
- ISO 3451-5:2002 Part 5: Poly(vinyl chloride)
- ISO 3452 Non-destructive testing — Penetrant testing
- ISO 3452-1:2021 Part 1: General principles
- ISO 3452-2:2021 Part 2: Testing of penetrant materials
- ISO 3452-3:2013 Part 3: Reference test blocks
- ISO 3452-4:1998 Part 4: Equipment
- ISO 3452-5:2008 Part 5: Penetrant testing at temperatures higher than 50 degrees C
- ISO 3452-6:2008 Part 6: Penetrant testing at temperatures lower than 10 degrees C
- ISO 3453:1984 Non-destructive testing — Liquid penetrant inspection — Means of verification [Withdrawn without replacement]
- ISO 3454:2008 Hydrometry – Direct depth sounding and suspension equipment
- ISO 3455:2021 Hydrometry – Calibration of current-meters in straight open tanks
- ISO 3456:1975 Aircraft — Lever-operated manual switches (Class 3) — Performance requirements
- ISO 3457:2003 Earth-moving machinery — Guards — Definitions and requirements
- ISO 3458:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
- ISO 3459:2015 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
- ISO 3460:1975 Unplasticized polyvinyl chloride (PVC) pressures pipes — Metric series — Dimensions of adapter for backing flange [Withdrawn: replaced with ISO 1452-3]
- ISO 3461 General principles for the creation of graphical symbols
- ISO 3461-1:1988 Part 1: Graphical symbols for use on equipment [Withdrawn: replaced with ISO 80416-1]
- ISO 3461-2:1987 Part 2: Graphical symbols for use in technical product documentation [Withdrawn: replaced with ISO 80416-1]
- ISO 3462:1980 Tractors and machinery for agriculture and forestry — Seat reference point — Method of determination [Withdrawn without replacement]
- ISO 3463:2006 Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions
- ISO 3464:1977 Textile machinery and accessories — Bearings for bottom rollers and allied dimensions — Caps with central nose and caps with side lugs [Withdrawn without replacement]
- ISO 3465:1975 Hand taper pin reamers
- ISO 3466:2016 Machine taper pin reamers with parallel shanks
- ISO 3467:2016 Machine taper pin reamers with Morse taper shanks
- ISO 3468:2014 Passenger cars — Windscreen defrosting and demisting systems — Test method
- ISO 3469:1989 Passenger cars — Windscreen washing systems — Test methods
- ISO 3470:1989 Passenger cars — Windscreen demisting systems — Test method [Withdrawn: replaced with ISO 3468]
- ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
- ISO 3472:1975 Unplasticized polyvinyl chloride (PVC) pipes — Specification and determination of resistance to acetone [Withdrawn without replacement]
- ISO 3473:1977 Unplasticized polyvinyl chloride (PVC) pipes — Effect of sulphuric acid — Requirement and test method [Withdrawn without replacement]
- ISO 3474:1976 Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity [Withdrawn without replacement]
- ISO 3475:2020 Essential oil of aniseed (Pimpinella anisum L.)
- ISO 3476:1975 Modular units for machine tool construction — Tenon drive and flanges for mounting multi- spindle heads
- ISO 3477:1981 Polypropylene (PP) pipes and fittings — Density — Determination and specification [Withdrawn without replacement]
- ISO 3478:1975 Polypropylene (PP) pipes — Determination of longitudinal reversion [Withdrawn: replaced with ISO 2505-(1-2)]
- ISO 3480:1976 Polypropylene (PP) pipes — Maximum permissible longitudinal reversion [Withdrawn without replacement]
- ISO 3481 Acoustics — measurement of noise emitted by pneumatric tools and machines [Rejected draft]
- ISO 3482 Marine technology — Technical guidelines for the active source exploration with Ocean Bottom Seismometers (OBS) [Under development]
- ISO 3483 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma — mass spectrometry [Under development]
- ISO/TR 3485:1980 Plastics — Polypropylene granules — Determination of thermal stability in air by pH method [Withdrawn without replacement]
- ISO 3486:1980 Wrought copper and copper alloys — Cold-rolled flat products delivered in straight lengths (sheet) — Dimensions and tolerances [Withdrawn without replacement]
- ISO 3487:1980 Wrought copper and copper alloys — Cold-rolled flat products in coils or on reels (strip) — Dimensions and tolerances [Withdrawn without replacement]
- ISO 3488:1982 Wrought copper and copper alloys — Extruded round, square or hexagonal bars — Dimensions and tolerances [Withdrawn without replacement]
- ISO 3489:1984 Wrought copper and copper alloys — Drawn round bars — All minus tolerances on diameter and form tolerances [Withdrawn without replacement]
- ISO 3490:1984 Wrought copper and copper alloys — Drawn hexagonal bars — All minus tolerances on width across flats and form tolerances [Withdrawn without replacement]
- ISO 3491:1984 Wrought copper and copper alloys — Drawn square bars — All minus tolerances on width across flats and form tolerances [Withdrawn without replacement]
- ISO 3492:1982 Wrought copper and copper alloys — Drawn round wire — Tolerances on diameter [Withdrawn without replacement]
- ISO 3493:2014 Vanilla – Vocabulary
- ISO 3494:1976 Statistical interpretation of data – Power of tests relating to means and variances
- ISO 3495:1975 Dried milk — Determination of lactic acid and lactates content [Withdrawn: replaced with ISO 8069]
- ISO 3496:1994 Meat and meat products — Determination of hydroxyproline content
- ISO 3497:2000 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
- ISO 3498:1979 Lubricants for machine tools — Classification [Withdrawn without replacement]
- ISO 3499:1976 Plastics — Aqueous dispersions of homopolymers and copolymers of vinyl acetate — Determination of bromine number [Withdrawn without replacement]
- ISO 3500:2005 Gas cylinders — Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
- ISO 3501:2021 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
- ISO 3503:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
- ISO 3505:1975 Ropes and cordage — Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels
- ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
- ISO 3506-1:2020 Part 1: Bolts, screws and studs with specified grades and property classes
- ISO 3506-2:2020 Part 2: Nuts with specified grades and property classes
- ISO 3506-3:2009 Part 3: Set screws and similar fasteners not under tensile stress
- ISO 3506-4:2009 Part 4: Tapping screws
- ISO 3506-5:2022 Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications
- ISO 3506-6:2020 Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
- ISO 3507:1999 Laboratory glassware – Pyknometers
- ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
- ISO 3509:2005 Coffee and coffee products – Vocabulary
- ISO 3511 Industrial process measurement control functions and instrumentation – Symbolic representation[Note 3]
- ISO 3511-1:1977 Part 1: Basic requirements
- ISO 3511-2:1984 Part 2: Extension of basic requirements
- ISO 3511-3:1984 Part 3: Detailed symbols for instrument interconnection diagrams
- ISO 3511-4:1985 Part 4: Basic symbols for process computer, interface, and shared display/control functions
- ISO 3512:1992 Heavy-duty cranked-link transmission chains
- ISO 3513:1995 Chillies — Determination of Scoville index
- ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
- ISO 3515:2002 Oil of lavender (Lavandula angustifolia Mill.)
- ISO 3516:1997 Oil of coriander fruits (Coriandrum sativum L.)
- ISO 3517:2012 Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
- ISO 3518:2002 Oil of sandalwood (Santalum album L.)
- ISO 3519:2005 Oil of lime distilled, Mexican type (Citrus aurantifolia (Christm.) Swingle)
- ISO 3520:2022 Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type
- ISO 3521:1997 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
- ISO 3522:2007 Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties
- ISO 3523:2002 Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla)
- ISO 3524:2003 Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)
- ISO 3525:2008 Oil of amyris (Amyris balsamifera L.)
- ISO 3526:2005 Oil of sage, Spanish (Salvia lavandulifolia Vahl)
- ISO 3527:2016 Essential oil of parsley fruits (Petroselinum sativum Hoffm.)
- ISO 3528:2012 Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
- ISO 3529 Vacuum technology – Vocabulary
- ISO 3529-1:2019 Part 1: General terms
- ISO 3529-2:2020 Part 2: Vacuum pumps and related terms
- ISO 3529-3:2024 Part 3: Total and partial pressure vacuum gauges
- ISO 3530:1979 Vacuum technology — Mass-spectrometer-type leak-detector calibration
- ISO 3531 Financial services — Financial information eXchange session layer [Original draft with this number unknown]
- ISO 3531-1:2022 Part 1: FIX tagvalue encoding
- ISO 3531-2:2022 Part 2: FIX session layer
- ISO 3531-3 :2022Part 3: FIX session layer test cases
- ISO 3532 Information technology — 3D Printing and scanning — Medical image-based modelling
- ISO 3532-1 Part 1: General requirement [Under development]
- ISO 3532-2 Part 2: Segmentation [Under development]
- ISO 3533:2021 Sex toys — Design and safety requirements for products in direct contact with genitalia, the anus, or both
- ISO 3534 Statistics – Vocabulary and symbols
- ISO 3534-1:2006 Part 1: General statistical terms and terms used in probability
- ISO 3534-2:2006 Part 2: Applied statistics
- ISO 3534-3:2013 Part 3: Design of experiments
- ISO 3534-4:2014 Part 4: Survey sampling
- ISO 3535:1977 Forms design sheet and layout chart [Withdrawn without replacement]
- ISO 3536:2016 Road vehicles – Safety glazing materials – Vocabulary
- ISO 3537:2015 Road vehicles – Safety glazing materials – Mechanical tests
- ISO 3538:1997 Road vehicles – Safety glazing materials – Test methods for optical properties
- ISO 3539:1975 Road vehicles — Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
- ISO 3540:1976 Paper or plastic printing ribbons – Characteristics of cores
- ISO 3541:1985 Earth-moving machinery — Dimensions of fuel filler opening [Withdrawn without replacement]
- ISO 3542:1975 Earth-moving machinery — Lubrication intervals [Withdrawn: replaced with ISO 6750]
- ISO 3543:2000 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
- ISO 3544:1978 Atomizing oil burners of the monobloc type — Safety times and safety control and monitoring devices [Withdrawn without replacement]
- ISO 3545 Steel tubes and fittings — Symbols for use in specifications
- ISO 3545-1:1989 Part 1: Tubes and tubular accessories with circular cross-section
- ISO 3545-2:1989 Part 2: Square and rectangular hollow sections
- ISO 3545-3:1989 Part 3: Tubular fittings with circular cross-section
- ISO 3546:1976 Fibre building boards — Determination of surface finish (roughness) [Withdrawn without replacement]
- ISO 3547 Plain bearings — Wrapped bushes
- ISO 3547-1:2018 Part 1: Dimensions
- ISO 3547-2:2017 Part 2: Test data for outside and inside diameters
- ISO 3547-3:2017 Part 3: Lubrication holes, grooves and indentations
- ISO 3547-4:2017 Part 4: Materials
- ISO 3547-5:2020 Part 5: Checking the outside diameter
- ISO 3547-6:2020 Part 6: Checking the inside diameter
- ISO 3547-7:2020 Part 7: Measurement of wall thickness of thin-walled bushes
- ISO 3548 Plain bearings — Thin-walled half bearings with or without flange
- ISO 3548-1:2014 Part 1: Tolerances, design features and methods of test
- ISO 3548-2:2020 Part 2: Measurement of wall thickness and flange thickness
- ISO 3548-3:2012 Part 3: Measurement of peripheral length
- ISO 3549:1995 Zinc dust pigments for paints — Specifications and test methods
- ISO 3550 Cigarettes — Determination of loss of tobacco from the ends
- ISO 3550-1:1997 Part 1: Method using a rotating cylindrical cage
- ISO 3550-2:1997 Part 2: Method using a rotating cubic box (sismelatophore)
- ISO 3551 Rotary core diamond drilling equipment — System A
- ISO 3551-1:1992 Part 1: Metric units
- ISO 3551-2:1992 Part 2: Inch units
- ISO 3552 Rotary core diamond drilling equipment — System B
- ISO 3552-1:1992 Part 1: Metric units
- ISO 3552-2:1992 Part 2: Inch units
- ISO 3553 Road vehicles — High-tension connections for ignition coils and distributors
- ISO 3553-1:1987 Part 1: Socket-type
- ISO 3553-2:1997 Part 2: Plug-types
- ISO 3554:1976 Credit cards — Magnetic stripe encoding for tracks 1 and 2 [Withdrawn: replaced with ISO 7810, ISO 7811-(1-5), and ISO/IEC 7813]
- ISO 3555:1977 Centrifugal, mixed flow and axial pumps — Code for acceptance tests — Class B [Withdrawn: replaced with ISO 9906]
- ISO 3556 Sputter-ion pumps — Measurement of performance characteristics [Rejected draft]
- ISO 3557 Plastics — Recommended Practice for Spectrophotometry and Calculation of Colour in CIE Systems [Rejected draft]
- ISO 3558 Plastics — Assessment of the Color of Near White or Near Colorless Materials [Rejected draft]
- ISO 3559:1976 Road vehicles — Working voltages for lights fitted to motor vehicles and to their trailers [Withdrawn without replacement]
- ISO 3560:2013 Road vehicles — Frontal fixed barrier or pole impact test procedure
- ISO 3561:1976 Information processing – Interchangeable magnetic six-disk pack – Track format [Withdrawn without replacement]
- ISO 3562:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Physical and magnetic characteristics [Withdrawn without replacement]
- ISO 3563:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Track format [Withdrawn without replacement]
- ISO 3564:1976 Information processing – Interchangeable magnetic eleven-disk pack – Physical and magnetic characteristics [Withdrawn without replacement]
- ISO 3565:1975 Meat and meat products — Detection of salmonellae (Reference method) [Withdrawn without replacement]
- ISO 3566:1976 Sodium fluoride primarily used for the production of aluminium — Determination of chlorides content — Turbidimetric method
- ISO 3567:2011 Vacuum gauges — Calibration by direct comparison with a reference gauge
- ISO 3568 Ionization vacuum gauges — Calibration by direct comparison with a reference gauge [Rejected draft]
- ISO 3569:1976 Continuous mechanical handling equipment — Classification of unit loads
- ISO 3570 Vacuum gauges — Standard methods for calibration [Rejected draft]
- ISO 3571 Passenger lift installations
- ISO 3571-1:1977 Part 1: Residential buildings – Definitions, functional dimensions, and modular co-ordination dimensions [Withdrawn: replaced by ISO 4190-1, in 2019 replaced by ISO 8100-30]
- ISO 3572:1976 Textiles – Weaves – Definitions of general terms and basic weaves
- ISO 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities
- ISO 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 3575:2016 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
- ISO 3576:1976 Hot-rolled carbon steel sheet coils for the production of cold-reduced products [Withdrawn without replacement]
- ISO 3577:1988 Animal fats — Determination of Bömer value [Withdrawn without replacement]
- ISO 3578:1980 Steel wire ropes — Standard designations [Withdrawn without replacement]
- ISO 3579 Technical Standard for Installation of Structural Modules in Nuclear Power Plants [Under development; original rejected draft ISO 3579 Green coffee beans — Determination of mass of foreign matter was incorporated into ISO 4149]
- ISO 3580:2017 Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification
- ISO 3581:2016 Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification
- ISO 3582:2000 Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 3583:1984 Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment
- ISO 3584:2020 Road vehicles — Clevis couplings — Interchangeability
- ISO 3585:1998 Borosilicate glass 3.3 — Properties
- ISO 3586:1976 Glass plant, pipeline and fittings — General rules for testing, handling and use [Withdrawn without replacement]
- ISO 3587:1976 Glass plant, pipeline and fittings — Pipeline and fittings of nominal bore 15 to 150 mm — Compatibility and interchangeability [Withdrawn without replacement]
- ISO 3588:1977 Spices and condiments — Determination of degree of fineness of grinding — Hand sieving method (Reference method)
- ISO 3589:1975 Modular units for machine tool construction — Integral way columns
- ISO 3590:1976 Modular units for machine tool construction — Spindle units
- ISO 3591:1977 Sensory analysis – Apparatus – Wine-tasting glass
- ISO 3592:2000 Industrial automation systems — Numerical control of machines — NC processor output — File structure and language format
- ISO 3593:1981 Starch — Determination of ash
- ISO 3594:1976 Milk fat — Detection of vegetable fat by gas-liquid chromatography of sterols (Reference method) [Withdrawn without replacement]
- ISO 3595:1976 Milk fat — Detection of vegetable fat by the phytosteryl acetate test
- ISO 3596:2000 Animal and vegetable fats and oils — Determination of unsaponifiable matter — Method using diethyl ether extraction
- ISO 3597 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin
- ISO 3597-1:2003 Part 1: General considerations and preparation of rods
- ISO 3597-2:2003 Part 2: Determination of flexural strength
- ISO 3597-3:2003 Part 3: Determination of compressive strength
- ISO 3597-4:2003 Part 4: Determination of apparent interlaminar shear strength
- ISO 3598:2011 Textile glass — Yarns — Basis for a specification
- ISO 3599:1976 Vernier callipers reading to 0,1 and 0,05 mm [Withdrawn without replacement]
- ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator’s manuals — Content and format
- ISO 3601 Fluid power systems – O-rings
- ISO 3601-1:2012 Inside diameters, cross-sections, tolerances and designation codes
- ISO 3601-2:2016 Housing dimensions for general applications
- ISO 3601-3:2005 Quality acceptance criteria
- ISO 3601-4:2008 Anti-extrusion rings (back-up rings)
- ISO 3601-5:2015 Suitability of elastomeric materials for industrial applications
- ISO 3602:1989 Documentation – Romanization of Japanese (kana script)
- ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness
- ISO 3604:1976 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness under conditions of external hydraulic pressure [Withdrawn without replacement]
- ISO 3605:1987 Textile glass — Rovings — Determination of compressive strength of rod composites [Withdrawn: replaced with ISO 3597-3]
- ISO 3606:1976 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
- ISO 3607:1977 Polyethylene (PE) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
- ISO 3608:1976 Chlorinated polyvinyl chloride (CPVC) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
- ISO 3609:1977 Polypropylene (PP) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
- ISO 3610:1976 Modular units for machine tool construction — Support brackets
- ISO 3611:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Micrometers for external measurements – Design and metrological characteristics
- ISO 3612:1977 Tobacco and tobacco products — Cigarettes — Determination of rate of free combustion [Withdrawn without replacement]
- ISO 3613:2021 Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
- ISO 3614:1975 Shipbuilding — Inland vessels — Detachable ladders [Withdrawn without replacement]
- ISO 3615:1976 Magnetic tape for instrumentation applications — Standardization of analogue modes of recording [Withdrawn: replaced with ISO 6068]
- ISO 3616:2001 Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
- ISO 3617:1994 Photography — Processing chemicals — Specifications for sodium hydroxide
- ISO 3618:1994 Photography — Processing chemicals — Specifications for benzotriazole
- ISO 3619:1994 Photography — Processing chemicals — Specifications for ammonium thiosulfate solution
- ISO 3620:1994 Photography — Processing chemicals — Specifications for aluminium potassium sulfate
- ISO 3621:1994 Photography — Processing chemicals — Specifications for sodium tetraborate decahydrate
- ISO 3622:1996 Photography — Processing chemicals — Specifications for ammonium thiocyanate
- ISO 3623:1994 Photography — Processing chemicals — Specifications for anhydrous potassium carbonate
- ISO 3624:1994 Photography — Processing chemicals — Specifications for potassium ferricyanide
- ISO 3625:1994 Photography — Processing chemicals — Specifications for potassium hydroxide
- ISO 3626:1996 Photography — Processing chemicals — Specifications for potassium thiocyanate
- ISO 3627:2001 Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite
- ISO 3628:1994 Photography — Processing chemicals — Specifications for boric acid, granular
- ISO 3629:2000 Photography — Processing chemicals — Specifications for potassium metabisulfite
- ISO 3630 Dentistry — Endodontic instruments
- ISO 3630-1:2019 Part 1: General requirements
- ISO 3630-2:2013 Part 2: Enlargers
- ISO 3630-3:2021 Part 3: Compactors
- ISO 3630-4:2009 Part 4: Auxiliary instruments
- ISO 3630-5:2020 Part 5: Shaping and cleaning instruments
- ISO 3630-6 Part 6: Numeric coding system [Under development]
- ISO 3630-7 Part 7: Ultrasonic inserts [Under development]
- ISO 3631:2019 Citrus fruits — Guidelines for storage
- ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 3]
- ISO 3632-1:2011 Part 1: Specification
- ISO 3632-2:2010 Part 2: Test methods
- ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)
- ISO 3634:1979 Vegetable products — Determination of chloride content
- ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure [Withdrawn: replaced with ISO 8559-1]
- ISO 3636:1977 Size designation of clothes — Men’s and boys’ outerwear garments [Withdrawn: replaced with ISO 8559-2]
- ISO 3637:1977 Size designation of clothes — Women’s and girls’ outerwear garments [Withdrawn: replaced with ISO 8559-2]
- ISO 3638:1977 Size designation of clothes — Infants’ garments [Withdrawn: replaced with ISO 8559-2]
- ISO 3639:1981 Cinematography — Projection reels/spools 75 to 312 mm diameter for 8 mm Type S motion-picture film — Dimensions and specifications
- ISO 3640:1982 Cinematography — Motion-picture prints and sound records for international exchange of television programmes — Specifications [Withdrawn without replacement]
- ISO 3641:1976 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Cartridge fit and take-up core drive — Dimensions and specifications
- ISO 3642:1983 Cinematography — Cemented or welded splices on 8 mm Type S motion-picture film for projector use — Dimensions
- ISO 3643 Cinematography — Image area produced by 8 mm Type S Model II motion-picture camera aperture and maximum projectable image area — Positions and dimensions [Rejected draft]
- ISO 3644:1976 Cinematography — Spindles for 8 mm Type R motion-picture cameras and projectors — Dimensions
- ISO 3645:1984 Cinematography — Image area produced by 8 mm Type S motion-picture camera aperture and maximum projectable image area — Positions and dimensions
- ISO 3646:1976 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Slots, projections and cartridge hole for indicating film speed, colour balance and film identification — Dimensions and positions
- ISO 3647:1976 Cinematography — Spindles for 16 mm motion-picture camera spools and projector reels — Dimensions
- ISO 3648:1994 Aviation fuels — Estimation of net specific energy
- ISO 3649:1980 Cleaning equipment for air or other gases — Vocabulary [Withdrawn: replaced with ISO 29464]
- ISO 3650 – ISO 3999
- [edit]
- ISO 3650:1998 Geometrical Product Specifications (GPS) – Length standards – Gauge blocks
- ISO 3651 Determination of resistance to intergranular corrosion of stainless steels
- ISO 3651-1:1998 Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
- ISO 3651-2:1998 Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
- ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
- ISO 3652:1975 Shipbuilding — Inland vessels — Rope reels
- ISO 3653:1978 Cinematography — Spindles for 8 mm Type S motion-picture projector reels/spools — Dimensions
- ISO 3654:1983 Cinematography — Motion-picture camera cartridge, 8-mm Type S, Model I — Cartridge-camera interface and take-up core drive — Dimensions and specifications [Withdrawn without replacement]
- ISO 3655:1986 Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table — General introduction and testing of the accuracy
- ISO 3656:2011 Animal and vegetable fats and oils — Determination of ultraviolet absorbance expressed as specific UV extinction
- ISO 3657:2020 Animal and vegetable fats and oils — Determination of saponification value
- ISO 3658 Crude or liquid petroleum products — Determination of density and relative density — Graduated bicapillary pyknometer method [Draft merged into ISO 3838]
- ISO 3659:1977 Fruits and vegetables — Ripening after cold storage
- ISO 3660:1976 Fishing nets – Mounting and joining of netting – Terms and illustrations
- ISO 3661:1977 End-suction centrifugal pumps — Baseplate and installation dimensions
- ISO 3662:1976 Hydraulic fluid power — Pumps and motors — Geometric displacements
- ISO 3663:1976 Polyethylene (PE) pressure pipes and fittings, metric series — Dimensions of flanges
- ISO 3664:2009 Graphic technology and photography — Viewing conditions
- ISO 3665:2011 Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications
- ISO/TR 3666:1998 Viscosity of water
- ISO 3667 Aircraft — Dimensions of hermetically sealed contactors [Rejected draft]
- ISO 3668:2017 Paints and varnishes — Visual comparison of colour of paints
- ISO 3669:2020 Vacuum technology — Dimensions of knife-edge flanges
- ISO 3670:1979 Blanks for plug gauges and handles (taper lock and trilock) and ring gauges — Design and general dimensions [Withdrawn without replacement]
- ISO 3671:1976 Plastics — Aminoplastic moulding materials — Determination of volatile matter
- ISO 3672 Plastics — Unsaturated-polyester resins (UP-R)
- ISO 3672-1:2000 Part 1: Designation system
- ISO 3672-2:2000 Part 2: Preparation of test specimens and determination of properties
- ISO 3673 Plastics — Epoxy resins
- ISO 3673-1:1996 Part 1: Designation
- ISO 3673-2:2012 Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
- ISO 3674:1976 Shipbuilding — Inland vessels — Deck rail
- ISO 3675:1998 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method
- ISO 3676:2012 Packaging – Complete, filled transport packages and unit loads – Unit load dimensions
- ISO 3677:2016 Filler metal for soldering and brazing — Designation
- ISO 3678:1976 Paints and varnishes — Print-free test [Withdrawn: replaced with ISO 9117-6]
- ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
- ISO 3680:2004 Determination of flash/no flash — Rapid equilibrium closed cup method [Withdrawn: replaced with ISO 3679]
- ISO 3681:2018 Binders for paints and varnishes — Determination of saponification value — Titrimetric method
- ISO 3682:1996 Binders for paints and varnishes — Determination of acid value — Titrimetric method [Withdrawn: replaced with ISO 2114]
- ISO 3683:1978 Soft soldered joints — Determination of shear strength [Withdrawn: replaced with ISO 5187]
- ISO 3684:1990 Conveyor belts — Determination of minimum pulley diameters
- ISO 3685:1993 Tool-life testing with single-point turning tools
- ISO 3686: Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy
- ISO 3686-1:2000 Part 1: Single column type machines
- ISO 3686-2:2000 Part 2: Portal type machines with moving table
- ISO 3687:1976 Paper and board — Determination of air resistance (Gurley) [Withdrawn without replacement]
- ISO 3688:1999 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 3689:1983 Paper and board — Determination of bursting strength after immersion in water
- ISO 3690:2018 Welding and allied processes — Determination of hydrogen content in arc weld metal
- ISO 3691 Industrial trucks — Safety requirements and verification
- ISO 3691-1:2011 Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- ISO 3691-2:2016 Part 2: Self-propelled variable-reach trucks
- ISO 3691-3:2016 Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
- ISO 3691-4:2020 Part 4: Driverless industrial trucks and their systems
- ISO 3691-5:2014 Part 5: Pedestrian-propelled trucks
- ISO 3691-6:2021 Part 6: Burden and personnel carriers
- ISO/TS 3691-7:2011 Part 7: Regional requirements for countries within the European Community [Withdrawn without replacement]
- ISO 3692:1976 Information processing – Reels and cores for 25,4 mm (1 in) perforated paper tape for information interchange – Dimensions [Withdrawn without replacement]
- ISO 3693:1977 Nitric acid for industrial use — Determination of chloride ions content — Potentiometric method [Withdrawn without replacement]
- ISO 3694:1977 Ammonium sulphate for industrial use — Determination of chloride ions content — Potentiometric method [Withdrawn without replacement]
- ISO 3695:1977 Ammonium nitrate for industrial use — Determination of chloride ions content — Potentiometric method [Withdrawn without replacement]
- ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
- ISO 3697:1976 Sodium hydroxide for industrial use — Determination of calcium and magnesium contents — Flame atomic absorption method [Withdrawn without replacement]
- ISO 3698:1976 Potassium hydroxide for industrial use — Determination of calcium and magnesium contents — Flame atomic absorption method [Withdrawn without replacement]
- ISO 3699:1976 Anhydrous hydrogen fluoride for industrial use — Determination of water content — Karl Fischer method
- ISO 3700:1980 Anhydrous hydrogen fluoride for industrial use — Determination of water content — Conductimetric method [Withdrawn without replacement]
- ISO 3701:1976 Anhydrous hydrogen fluoride for industrial use — Determination of hexafluorosilicic acid content — Reduced molybdosilicate photometric method [Withdrawn without replacement]
- ISO 3702:1976 Anhydrous hydrogen fluoride for industrial use — Determination of sulphur dioxide content — Iodometric method [Withdrawn without replacement]
- ISO 3703:1993 Acid-grade and ceramic-grade fluorspar — Determination of flotation agents [Withdrawn without replacement]
- ISO 3704:1976 Sulphur for industrial use — Determination of acidity — Titrimetric method
- ISO 3705:1976 Sulphur for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method
- ISO 3706:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of total phosphorus (V) oxide content — Quinoline phosphomolybdate gravimetric method
- ISO 3707:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of calcium content — Flame atomic absorption method
- ISO 3708:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of chloride content — Potentiometric method [Withdrawn without replacement]
- ISO 3709:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of oxides of nitrogen content — 3,4- Xylenol spectrophotometric method [Withdrawn without replacement]
- ISO 3710:1990 Lead chrome green pigments — Specifications and methods of test [Withdrawn without replacement]
- ISO 3711:1990 Lead chromate pigments and lead chromate-molybdate pigments — Specifications and methods of test
- ISO 3713:1987 Ferroalloys – Sampling and preparation of samples – General rules
- ISO 3714:1980 Oil of pennyroyal [Withdrawn without replacement]
- ISO 3715 Ships and marine technology – Propulsion plants for ships
- ISO 3715-1:2002 Part 1: Vocabulary for geometry of propellers
- ISO 3715-2:2001 Part 2: Vocabulary for controllable-pitch propeller plants
- ISO 3716:2021 Hydrometry – Functional requirements and characteristics of suspended-sediment samplers
- ISO/TR 3717:1975 Textile glass — Mats and woven fabrics — Determination of wet-out time through resin [Withdrawn without replacement]
- ISO/TR 3718:1975 Textile glass — Determination of wet-through time through resin [Withdrawn without replacement]
- ISO 3719:1994 Mechanical vibration — Symbols for balancing machines and associated instrumentation [Withdrawn without replacement]
- ISO 3720:2011 Black tea — Definition and basic requirements
- ISO 3721 Information technology — Computer graphics, image processing and environmental data representation — Information model for Mixed and Augmented Reality Contents [Under development; originally planned ISO 3721 was Rigid cellular practice — classification and designation]
- ISO 3721-1 Part 1: Core Objects and Attributes [Under development]
- ISO 3721-2 Part 2: Augmentation Style Specification [Under development]
- ISO 3722:1976 Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods
- ISO 3723:2015 Hydraulic fluid power — Filter elements — Method for end load test
- ISO 3724:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant
- ISO 3725 Ships and marine technology — Aquatic nuisance species — Methods for evaluating the performance of compliance monitoring devices for ballast water discharges [Under development; originally planned ISO 3725 Statistics – Symbols merged into ISO 3534]
- ISO 3726:1983 Instant coffee — Determination of loss in mass at 70 degrees C under reduced pressure
- ISO 3727 Butter — Determination of moisture, non-fat solids and fat contents
- ISO 3727-1:2001 Part 1: Determination of moisture content (Reference method)
- ISO 3727-2:2001 Part 2: Determination of non-fat solids content (Reference method)
- ISO 3727-3:2003 Part 3: Calculation of fat content
- ISO 3728:2004 Ice-cream and milk ice — Determination of total solids content (Reference method)
- ISO 3729:1976 Fibre building boards — Determination of surface stability [Withdrawn without replacement]
- ISO 3730:2012 Shipbuilding and marine structures — Mooring winches
- ISO 3731:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage
- ISO 3732:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage
- ISO 3733:1999 Petroleum products and bituminous materials — Determination of water — Distillation method
- ISO 3734:1997 Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
- ISO 3735:1999 Crude petroleum and fuel oils — Determination of sediment — Extraction method
- ISO 3736 Digital fitting — Service procedure [originally planned ISO 3736 Standard atmospheres for conditioning and/or testing — Specifications was numbered ISO 554 to replace ISO/R 554]
- ISO 3736-1 Part 1: Ready-to-wear clothing online and off-line [Under development]
- ISO 3736-2 Part 2: Customized clothing online and off-line [Under development]
- ISO 3737:1976 Agricultural tractors and self-propelled machines — Test method for enclosure pressurization systems [Withdrawn: replaced with ISO 14269-(1-5)]
- ISO 3738 Hardmetals — Rockwell hardness test (scale A)
- ISO 3738-1:1982 Part 1: Test method
- ISO 3738-2:1988 Part 2: Preparation and calibration of standard test blocks
- ISO 3739 Industrial tyres and rims
- ISO 3739-1:2007 Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims
- ISO 3739-2:2021 Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings
- ISO 3739-3:2021 Part 3: Rims
- ISO 3740:2019 Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards
- ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms
- ISO 3742:1988 Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms [Withdrawn: replaced with ISO 3741]
- ISO 3743 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields[Note 3]
- ISO 3743-1:2010 Part 1: Comparison method for a hard-walled test room
- ISO 3743-2:2018 Part 2: Methods for special reverberation test rooms
- ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane
- ISO 3745:2012 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms
- ISO 3746:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane
- ISO 3747:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment
- ISO 3748 Acoustics — Determination of sound power levels of noise sources — Engineering method for small, nearly omnidirectional sources under free-field conditions over a reflecting plane [Rejected draft]
- ISO 3749:2022 Glass syringes — Determination of extractable tungsten [Original draft with this number unknown]
- ISO 3750:2006 Zinc alloys — Determination of magnesium content — Flame atomic absorption spectrometric method
- ISO 3751:1976 Zinc ingots — Selection and preparation of samples for chemical analysis [Withdrawn: replaced with ISO 20081]
- ISO 3752:1976 Zinc alloy ingots — Selection and preparation of samples for chemical analysis [Withdrawn: replaced with ISO 20081]
- ISO 3753:1977 Vacuum technology — Graphical symbols [Withdrawn without replacement]
- ISO 3754:1976 Steel — Determination of effective depth of hardening after flame or induction hardening [Withdrawn: replaced with ISO 18203]
- ISO 3755:1991 Cast carbon steels for general engineering purposes [Withdrawn: replaced with ISO 14737]
- ISO 3756:1976 Oil of cubeb
- ISO 3757:2002 Oil of patchouli (Pogostemon cablin (Blanco) Benth.)
- ISO 3758:2012 Textiles — Care labelling code using symbols
- ISO 3759:2011 Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
- ISO 3760:2002 Oil of celery seed (Apium graveolens L.)
- ISO 3761:2005 Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.)
- ISO 3762:1979 Paper — Preparation of a letterpress print for test purposes [Withdrawn without replacement]
- ISO 3763:1976 Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions
- ISO 3764:2016 Timekeeping instruments — Movements — Types, dimensions and nomenclature
- ISO 3765:1998 Timekeeping instruments — Wristwatches — Dimensions of bracelet-to-case fastening elements
- ISO 3766:2003 Construction drawings – Simplified representation of concrete reinforcement
- ISO 3767 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – Symbols for operator controls and other displays
- ISO 3767-1:2016 Part 1: Common symbols
- ISO 3767-2:2016 Part 2: Symbols for agricultural tractors and machinery
- ISO 3767-3:2016 Part 3: Symbols for powered lawn and garden equipment
- ISO 3767-4:2016 Part 4: Symbols for forestry machinery
- ISO 3767-5:2016 Part 5: Symbols for manual portable forestry machines
- ISO 3768:1976 Metallic coatings — Neutral salt spray test (NSS test) [Withdrawn: replaced with ISO 9227]
- ISO 3769:1976 Metallic coatings — Neutral salt spray test (NSS test) [Withdrawn: replaced with ISO 9227]
- ISO 3770:1976 Metallic coatings — Copper-accelerated acetic acid salt spray test (CASS test) [Withdrawn: replaced with ISO 9227]
- ISO 3771:2011 Petroleum products — Determination of base number — Perchloric acid potentiometric titration method
- ISO 3772:2000 Photography — Rolls of sensitized material for the pre-press industry — Dimensions and related requirements
- ISO 3773:1983 Cinematography — Tape splices for 8 mm Type S motion-picture film for projector use — Dimensions
- ISO 3774:1988 Cinematography — 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) — Cutting and perforating dimensions
- ISO 3775:1990 Cinematography — Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3) — Position and dimensions [Withdrawn without replacement]
- ISO 3776 Tractors and machinery for agriculture — Seat belts
- ISO 3776-1:2006 Part 1: Anchorage location requirements
- ISO 3776-2:2013 Part 2: Anchorage strength requirements
- ISO 3776-3:2009 Part 3: Requirements for assemblies
- ISO 3777:1976 Radiographic inspection of resistance spot welds for aluminium and its alloys — Recommended practice [Withdrawn without replacement]
- ISO/TR 3778:1987 Agricultural tractors — Maximum actuating forces required to operate controls [Withdrawn: replaced with ISO 15077]
- ISO 3779:2009 Road vehicles — Vehicle identification number (VIN) — Content and structure
- ISO 3780:2009 Road vehicles — World manufacturer identifier (WMI) code
- ISO 3781:2011 Paper and board — Determination of tensile strength after immersion in water
- ISO 3782:1980 Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model) [Withdrawn without replacement]
- ISO 3783:2006 Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)
- ISO 3784:1976 Road vehicles — Measurement of impact velocity in collision tests
- ISO 3785:2006 Metallic materials — Designation of test specimen axes in relation to product texture
- ISO 3786:1975 Shipbuilding — Inland navigation towing hooks — Scale of tractive efforts
- ISO 3787:1976 Wood — Test methods — Determination of ultimate stress in compression parallel to grain [Withdrawn: replaced with ISO 13061-167]
- ISO/IEC 3788:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3 200 ftpi), 63 cpmm (1 600 cpi)
- ISO 3789 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls
- ISO 3789-1:1982 Part 1: Common controls [Withdrawn: replaced with ISO 15077]
- ISO 3789-2:1982 Part 2: Controls for agricultural tractors and machinery [Withdrawn: replaced with ISO 15077]
- ISO 3790:1976 Fishing nets — Determination of elongation of netting yarns
- ISO 3791:1976 Office machines and data processing equipment – Keyboard layouts for numeric applications
- ISO 3792:1976 Adding machines – Layout of function keyboard
- ISO 3793:1976 Essential oils — Estimation of primary and secondary free alcohols content by acetylation in pyridine [Withdrawn without replacement]
- ISO 3794:1976 Essential oils (containing tertiary alcohols) — Estimation of free alcohols content by determination of ester value after acetylation
- ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
- ISO 3796:1999 Ships and marine technology — Clear openings for external single-leaf doors
- ISO 3797:1976 Shipbuilding — Vertical steel ladders
- ISO 3798:1976 Tinplate and blackplate — Minimum packaging requirements [Withdrawn without replacement]
- ISO 3799:1976 Textile machinery and accessories — Hydraulic lubricating fittings for textile machinery [Withdrawn without replacement]
- ISO 3800:1993 Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results
- ISO 3801:1977 Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
- ISO 3802:1976 Information processing – General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications
- ISO 3803:1984 Road vehicles — Hydraulic pressure test connection for braking equipment
- ISO 3804:1977 Plywood — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
- ISO 3805:1977 Plywood — Determination of density [Withdrawn: replaced with ISO 9427]
- ISO 3806:1977 Plywood — Determination of moisture content [Withdrawn: replaced with ISO 9425]
- ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing
- ISO 3808:2002 Road vehicles — Unscreened high-voltage ignition cables — General specifications, test methods and requirements
- ISO 3809:2004 Oil of lime (cold pressed), Mexican type (Citrus aurantifolia (Christm.) Swingle), obtained by mechanical means
- ISO 3810:1987 Floor tiles of agglomerated cork — Methods of test
- ISO 3811:1979 Meat and meat products — Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli — (Reference method) [Withdrawn: replaced with ISO 4831, ISO 4832, and ISO 7251]
- ISO 3812:1976 Essential oils of geranium and rose — Determination of ester value after hot formylation
- ISO 3813:2004 Resilient floor coverings — Cork floor tiles — Specification [Withdrawn without replacement]
- ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials — Their development and application
- ISO 3815 Zinc and zinc alloys
- ISO 3815-1:2005 Part 1: Analysis of solid samples by optical emission spectrometry
- ISO 3815-2:2005 Part 2: Analysis by inductively coupled plasma optical emission spectrometry
- ISO 3816:1976 Zinc ingots — Selection and preparation of samples for spectrographic analysis [Withdrawn: replaced with ISO 20081]
- ISO 3817:1976 Zinc alloy ingots — Selection and preparation of samples for spectrographic analysis [Withdrawn: replaced with ISO 20081]
- ISO/TR 3818:1977 Ropes and cordage — Rope assemblies used in slinging — Safe working loads [Withdrawn without replacement]
- ISO 3819:2015 Laboratory glassware – Beakers
- ISO 3820:1978 Cinematography — Sprockets for 8 mm Type S motion-picture film — Dimensions and design
- ISO 3821:2019 Gas welding equipment — Rubber hoses for welding, cutting and allied processes
- ISO 3822 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations
- ISO 3822-1:1999 Part 1: Method of measurement
- ISO 3822-2:1995 Part 2: Mounting and operating conditions for draw-off taps and mixing valves
- ISO 3822-3:2018 Part 3: Mounting and operating conditions for in-line valves and appliances
- ISO 3822-4:1997 Part 4: Mounting and operating conditions for special appliances
- ISO 3823 Dental rotary instruments — Burs
- ISO 3823-1:1997 Part 1: Steel and carbide burs
- ISO 3823-2:2003 Part 2: Finishing burs
- ISO 3824:1984 Dental silicophosphate cement (hand-mixed) [Withdrawn: replaced with ISO 9917]
- ISO 3825:1977 Glass transfusion bottles for medical use — Chemical resistance [Withdrawn without replacement]
- ISO 3826 Plastics collapsible containers for human blood and blood components
- ISO 3826-1:2013 Part 1: Conventional containers
- ISO 3826-2:2008 Part 2: Graphical symbols for use on labels and instruction leaflets
- ISO 3826-3:2006 Part 3: Blood bag systems with integrated features
- ISO 3826-4:2015 Part 4: Aphaeresis blood bag systems with integrated features
- ISO 3827 Shipbuilding — Co-ordination of dimensions in ships’ accommodation
- ISO 3827-1:1977 Part 1: Principles of dimensional co-ordination
- ISO 3827-2:1977 Part 2: Glossary of terms
- ISO 3827-3:1977 Part 3: Co-ordinating sizes for components and assemblies
- ISO 3827-4:1977 Part 4: Controlling dimensions
- ISO 3827-5:1979 Part 5: Co-ordinating sizes for key components
- ISO 3828:2008 Shipbuilding and marine structures – Deck machinery – Vocabulary and symbols
- ISO 3829 Petroleum products – Determination of density and relative density – Jaulmes pyknometer method [Rejected draft]
- ISO 3830:1993 Petroleum products — Determination of lead content of gasoline — Iodine monochloride method
- ISO 3831:1979 Timekeeping instruments — Classification and numbering system and nomenclature of components for watches and clocks [Withdrawn without replacement]
- ISO 3832:2002 Passenger cars — Luggage compartments — Method of measuring reference volume
- ISO 3833:1977 Road vehicles – Types – Terms and definitions
- ISO 3834 Quality requirements for fusion welding of metallic materials
- ISO 3834-1:2021 Part 1: Criteria for the selection of the appropriate level of quality requirements
- ISO 3834-2:2021 Part 2: Comprehensive quality requirements
- ISO 3834-3:2021 Part 3: Standard quality requirements
- ISO 3834-4:2021 Part 4: Elementary quality requirements
- ISO 3834-5:2021 Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
- ISO 3835 Equipment for vine cultivation and wine making – Vocabulary
- ISO 3835-1:1976 (No part title)
- ISO 3835-2:1977 (No part title) [Withdrawn without replacement]
- ISO 3835-3:1980 (No part title)
- ISO 3835-4:1981 (No part title)
- ISO 3835-5:1982 (No part title) [Withdrawn without replacement]
- ISO/TR 3836:1978 Shoe sizes — System of width grading (for use in the Mondopoint system) [Withdrawn without replacement]
- ISO 3837:1993 Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method
- ISO 3838:2004 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
- ISO 3839:1996 Petroleum products — Determination of bromine number of distillates and aliphatic olefins — Electrometric method
- ISO 3840:1976 Petroleum distillates — Determination of olefinic plus aromatic hydrocarbons content [Withdrawn without replacement]
- ISO 3841:1977 Petroleum waxes — Determination of melting point (cooling curve) [Withdrawn without replacement]
- ISO 3842:2006 Road vehicles — Fifth wheels — Interchangeability
- ISO 3843 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light [Draft named ISO 2135 as it was a revision of ISO/R 2135]
- ISO 3844:1975 Shoe sizes — Method of marking [Withdrawn: replaced with ISO 9407]
- ISO 3845 Petroleum and natural gas industries — High-test steel line pipe [Rejected draft]
- ISO 3846:2008 Hydrometry – Open channel flow measurement using rectangular broad-crested weirs
- ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes – End-depth method for estimation of flow in rectangular channels with a free overfall [Withdrawn: replaced with ISO 18481]
- ISO 3848:2016 Essential oil of citronella, Java type
- ISO 3849:2003 Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.)
- ISO 3850:2004 Resilient floor coverings – Determination of apparent density of composition cork
- ISO 3851:1977 Capsulated dental silicate and silico-phosphate filling materials [Withdrawn: replaced with ISO 9917]
- ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
- ISO 3853:1994 Road vehicles — Towing vehicle coupling device to tow caravans or light trailers — Mechanical strength test
- ISO 3854:1976 Road vehicles — Caravans and light trailers — Vacuum braking — Measurement of reaction time [Withdrawn without replacement]
- ISO 3855:1977 Milling cutters – Nomenclature
- ISO 3856 Paints and varnishes — Determination of “soluble” metal content
- ISO 3856-1:1984 Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method
- ISO 3856-2:1984 Part 2: Determination of antimony content — Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method
- ISO 3856-3:1984 Part 3: Determination of barium content — Flame atomic emission spectrometric method
- ISO 3856-4:1984 Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method
- ISO 3856-5:1984 Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form — Diphenylcarbazide spectrophotometric method
- ISO 3856-6:1984 Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method
- ISO 3856-7:1984 Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints — Flameless atomic absorption spectrometric method
- ISO 3857 Compressors, pneumatic tools and machines – Vocabulary
- ISO 3857-1:1977 Part 1: General
- ISO 3857-2:1977 Part 2: Compressors
- ISO 3857-3:1989 Part 3: Pneumatic tools and machines
- ISO 3857-4:2012 Part 4: Air treatment
- ISO 3858:2018 Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract
- ISO 3859:2000 Inverse dovetail cutters and dovetail cutters with cylindrical shanks
- ISO 3860:2011 Bore cutters with key drive — Form milling cutters with constant profile
- ISO 3861:2005 Rubber hoses and hose assemblies for sand and grit blasting — Specification
- ISO 3862:2020 Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification
- ISO 3863:1989 Cylindrical cork stoppers — Dimensional characteristics, sampling, packaging and marking [Withdrawn without replacement]
- ISO 3864 Graphical symbols – Safety colours and safety signs
- ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
- ISO 3866:1977 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools exceeding 19 mm
- ISO 3867:2017 Composition cork — Expansion joint fillers — Test methods
- ISO 3868:1976 Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method
- ISO 3869:2017 Agglomerated cork — Expansion joint fillers — Specifications, packaging and marking
- ISO 3870:1976 Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials — Adjustment of take-up device [Withdrawn without replacement]
- ISO 3871:2000 Road vehicles — Labelling of containers for petroleum-based or non-petroleum-based brake fluid
- ISO 3872:1976 Graphic technology — Sheet-fed printing machines — Range of sizes [Withdrawn without replacement]
- ISO 3873:1977 Industrial safety helmets
- ISO 3874:2017 Series 1 freight containers — Handling and securing
- ISO 3875:2020 Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
- ISO 3876:1986 Shipbuilding — Inland vessels — Hand-holes
- ISO 3877 Tyres, valves and tubes – List of equivalent terms
- ISO 3877-1:1997 Part 1: Tyres
- ISO 3877-2:1997 Part 2: Tyre valves
- ISO 3877-3:1978 Part 3: Tubes
- ISO 3877-4:1984 Part 4: Solid tyres
- ISO 3878:1983 Hardmetals — Vickers hardness test [Withdrawn without replacement]
- ISO 3879:1977 Welded joints — Recommended practice for liquid penetrant testing [Withdrawn: replaced with ISO 3452]
- ISO 3880 Building construction – Stairs – Vocabulary
- ISO 3880-1:1977 [Withdrawn without replacement]
- ISO 3881:1977 Building construction — Modular co-ordination — Stairs and stair openings — Co-ordinating dimensions
- ISO 3882:2003 Metallic and other inorganic coatings — Review of methods of measurement of thickness
- ISO 3883:1977 Office machines – Line and character capacity of address masters
- ISO/DIS 3884:1975 Plastic[4]
- ISO 3886:1986 Iron ores — Determination of manganese content — Periodate spectrophotometric method [Withdrawn: replaced with ISO 9682-2]
- ISO 3887:2007 Steels — Determination of the depth of decarburization
- ISO 3888 Passenger cars — Test track for a severe lane-change manoeuvre
- ISO 3888-1:2018 Part 1: Double lane-change
- ISO 3888-2:2011 Part 2: Obstacle avoidance
- ISO 3889:2006 Milk and milk products — Specification of Mojonnier-type fat extraction flasks
- ISO 3890 Milk and milk products — Determination of residues of organochlorine compounds (pesticides)
- ISO 3890-1:2009 Part 1: General considerations and extraction methods
- ISO 3890-2:2009 Part 2: Test methods for crude extract purification and confirmation
- ISO 3891:1978 Acoustics — Procedure for describing aircraft noise heard on the ground [Withdrawn without replacement]
- ISO 3892:2000 Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
- ISO 3893:1977 Concrete — Classification by compressive strength [Withdrawn without replacement]
- ISO 3894:2015 Road vehicles — Wheels/rims for commercial vehicles — Test methods
- ISO 3895:1986 Road vehicles — Screened and waterproof spark-plug and its connection — Type 2
- ISO 3896:1986 Road vehicles — Screened and waterproof spark-plug and its connection — Type 3
- ISO 3897:1997 Photography — Processed photographic plates — Storage practices [Withdrawn: replaced with ISO 18918]
- ISO 3898:2013 Bases for design of structures — Names and symbols of physical quantities and generic quantities
- ISO 3899:2005 Rubber — Nitrile latex — Determination of residual acrylonitrile content
- ISO 3900:1995 Rubber — Nitrile latex — Determination of bound acrylonitrile content
- ISO 3901:2019 Information and documentation – International Standard Recording Code (ISRC)
- ISO 3902:1990 Shipbuilding and marine structures — Gaskets for rectangular windows and side scuttles
- ISO 3903:2012 Ships and marine technology — Ships’ ordinary rectangular windows
- ISO 3904:1990 Shipbuilding and marine structures — Clear-view screens
- ISO 3905:1980 Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) [Withdrawn: replaced with ISO 6504-3]
- ISO 3906:1980 Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) [Withdrawn: replaced with ISO 6504-3]
- ISO 3907:2009 Hardmetals — Determination of total carbon — Gravimetric method
- ISO 3908:2009 Hardmetals — Determination of insoluble (free) carbon — Gravimetric method
- ISO 3909:1976 Hardmetals — Determination of cobalt — Potentiometric method
- ISO 3910:1983 Rubber boots, unlined moulded [Withdrawn without replacement]
- ISO 3911:2021 Wheels and rims for pneumatic tyres – Vocabulary, designation and marking
- ISO 3912:1977 Woodruff keys and keyways [Withdrawn without replacement]
- ISO 3913:1977 Shipbuilding — Welded steel bollards
- ISO 3914 Textile machinery and accessories — Cylindrical tubes
- ISO 3914-1:1994 Part 1: Recommended main dimensions
- ISO 3914-2:1994 Part 2: Dimensions, tolerances and designation of tubes for open-end spinning machines
- ISO 3914-3:1994 Part 3: Dimensions, tolerances and designation of tubes for tape yarns
- ISO 3914-4:1994 Part 4: Dimensions, tolerances and designation of tubes for textured yarns [Withdrawn without replacement]
- ISO 3914-5:1994 Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns [Withdrawn without replacement]
- ISO 3914-6:1994 Part 6: Dimensions, tolerances and designation of tubes for cross-wound packages in winding and twisting [Withdrawn without replacement]
- ISO 3914-7:1994 Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing
- ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
- ISO 3916:1977 Shipbuilding — Inland navigation — Rope tubs [Withdrawn without replacement]
- ISO 3917:2016 Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
- ISO 3918:2007 Milking machine installations – Vocabulary
- ISO 3919:2005 Coated abrasives — Flap wheels with shaft
- ISO 3920:1976 Honing stones of square section — Designation and dimensions [Withdrawn: replaced with ISO 603-(1-16)]
- ISO 3921:1976 Honing stones of rectangular section — Designation and dimensions [Withdrawn: replaced with ISO 603-(1-16)]
- ISO 3922:1978 Continuous mechanical handling equipment — Rotary vane feeder — Dimensional specifications [Withdrawn without replacement]
- ISO 3923 Metallic powders — Determination of apparent density
- ISO 3923-1:2018 Part 1: Funnel method
- ISO 3923-2:1981 Part 2: Scott volumeter method
- ISO 3923-3:1986 Part 3: Oscillating funnel method [Withdrawn without replacement]
- ISO 3924:2019 Petroleum products — Determination of boiling range distribution — Gas chromatography method
- ISO 3925:2014 Unsealed radioactive substances — Identification and documentation
- ISO 3926:1980 Shipbuilding — Inland navigation — Couplings for oil and fuel reception — Mating dimensions
- ISO 3927:2017 Metallic powders, excluding powders for hardmetals — Determination of compressibility in uniaxial compression
- ISO 3928:2016 Sintered metal materials, excluding hardmetals — Fatigue test pieces
- ISO 3929:2003 Road vehicles — Measurement methods for exhaust gas emissions during inspection or maintenance
- ISO 3930:2000 Instruments for measuring vehicle exhaust emissions [Withdrawn without replacement]
- ISO 3931 Fibre building boards – Determination of transversal internal bond [Rejected draft]
- ISO 3932:1976 Textiles — Woven fabrics — Measurement of width of pieces [Withdrawn: replaced with ISO 22198]
- ISO 3933:1976 Textiles — Woven fabrics — Measurement of length of pieces [Withdrawn: replaced with ISO 22198]
- ISO 3934:2021 Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
- ISO 3935:1977 Shipbuilding — Inland navigation — Fire-fighting water system — Pressures [Withdrawn without replacement]
- ISO 3936:1993 Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
- ISO 3937 Cutter arbors with tenon drive
- ISO 3937-1:2008 Part 1: Dimensions of Morse taper
- ISO 3937-2:2008 Part 2: Dimensions of 7/24 taper
- ISO 3937-3:2008 Part 3: Dimensions of hollow taper interface with flange contact surface
- ISO 3938:1986 Hydraulic fluid power — Contamination analysis — Method for reporting analysis data [Withdrawn without replacement]
- ISO 3939:1977 Fluid power systems and components — Multiple lip packing sets — Methods for measuring stack heights
- ISO 3940:1977 Tapered die-sinking cutters with parallel shanks
- ISO 3941:1977 Classification of fires
- ISO 3942:1976 Photographic grade sodium carbonate, monohydrate — Specification [Withdrawn: replaced with ISO 424]
- ISO 3943:1993 Photography — Processing chemicals — Specifications for anhydrous sodium acetate
- ISO 3944:1992 Fertilizers — Determination of bulk density (loose)
- ISO 3945:1985 Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ [Withdrawn: replaced with ISO 10816-1]
- ISO 3946:1982 Starches and derived products — Determination of total phosphorus content — Spectrophotometric method
- ISO 3947:1977 Starches, native or modified — Determination of total fat content
- ISO 3948:1977 Shipbuilding — Inland vessels — Compressed-air systems — Pressure ranges
- ISO 3949:2020 Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
- ISO 3950:2016 Dentistry – Designation system for teeth and areas of the oral cavity
- ISO 3951 Sampling procedures for inspection by variables
- ISO 3951-1:2013 Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- ISO 3951-2:2013 Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
- ISO 3951-3:2007 Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 3951-4:2011 Part 4: Procedures for assessment of declared quality levels
- ISO 3951-5:2006 Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
- ISO 3952 Kinematic diagrams – Graphical symbols
- ISO 3952-1:1981 (Motion of links of mechanisms; Kinematic pairs; Links and connections of their components; Linkage of bars and their links)
- ISO 3952-2:1981 (Friction and gear mechanisms; Cam mechanisms)
- ISO 3952-3:1979 (Maltese and ratchet mechanisms; Couplings and brakes)
- ISO 3952-4:1984 (Miscellaneous mechanisms and their components)
- ISO 3953:2011 Metallic powders — Determination of tap density
- ISO 3954:2007 Powders for powder metallurgical purposes — Sampling
- ISO 3955:1977 Sintered metal materials, excluding hardmetals — Sampling [Withdrawn without replacement]
- ISO/TR 3956:1975 Principles of structural fire-engineering design with special regard to the connection between real fire exposure and the heating conditions of the standard fire-resistance test (ISO 834)
- ISO 3957 Reaction to fire tests — Façades — Measurement of heat and smoke generation in severe exterior fire scenarios [Under development; originally planned ISO 3957 Graphic symbols — Index, survey, and compilation of the single sheets became ISO 7000]
- ISO 3958:1996 Passenger cars — Driver hand-control reach
- ISO 3959:1977 Green bananas — Ripening conditions
- ISO 3960:2017 Animal and vegetable fats and oils — Determination of peroxide value — Iodometric (visual) endpoint determination
- ISO 3961:2018 Animal and vegetable fats and oils — Determination of iodine value
- ISO 3962:1977 Materials and equipment for petroleum and natural gas industries — Tool joints for steel drill pipe for oil or natural gas wells [Withdrawn without replacement]
- ISO 3963:1977 Fertilizers — Sampling from a conveyor by stopping the belt
- ISO 3964:2016 Dentistry — Coupling dimensions for handpiece connectors
- ISO 3965:1990 Agricultural wheeled tractors — Maximum speeds — Method of determination
- ISO 3966:2020 Measurement of fluid flow in closed conduits – Velocity area method using Pitot static tubes
- ISO 3967 Petroleum products – Determination of density and relative density – Bingham pyknometer method [Rejected draft]
- ISO 3968:2017 Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow
- ISO 3969:1979 Shipbuilding — Inland vessels — Operational documentation
- ISO 3970:1977 Modular units for machine tool construction — Integral way columns — Floor-mounted type
- ISO 3971:1977 Rice milling — Symbols and equivalent terms [Withdrawn without replacement]
- ISO 3972:2011 Sensory analysis — Methodology — Method of investigating sensitivity of taste
- ISO 3973:1996 Living animals for slaughter — Vocabulary — Bovines [Withdrawn without replacement]
- ISO 3974:1977 Definitions of living animals for slaughter — Ovines
- ISO 3975:1977 Definitions of living animals for slaughter — Horses [Withdrawn without replacement]
- ISO 3976:2006 Milk fat — Determination of peroxide value
- ISO 3977 Gas turbines – Procurement
- ISO 3978:1976 Aluminium and aluminium alloys — Determination of chromium — Spectrophotometric method using diphenylcarbazide, after extraction
- ISO 3979:1977 Aluminium and aluminium alloys — Determination of nickel — Spectrophotometric method using dimethylglyoxime [Withdrawn without replacement]
- ISO 3980:1977 Aluminium and aluminium alloys — Determination of copper — Atomic absorption spectrophotometric method
- ISO 3981:1977 Aluminium and aluminium alloys — Determination of nickel — Atomic absorption spectrophotometric method
- ISO 3982 Chemical analysis of aluminum and its alloys — Complexometric determination of magnesium [Rejected draft]
- ISO 3983:1977 Cereals and cereal products — Determination of alpha-amylase activity — Colorimetric method [Withdrawn without replacement]
- ISO 3984:2004 Road vehicles — Rear moving barrier impact test procedure [Withdrawn without replacement]
- ISO/TR 3985:2021 Biotechnology — Data publication — Preliminary considerations and concepts [originally planned ISO 3985 was a rejected draft with an unknown name]
- ISO 3986 Petroleum products — Lubricating wax — Determination of cone penetration [Rejected draft]
- ISO 3987:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives
- ISO 3988 Determination of Spontaneous ignition temperature [Rejected draft]
- ISO 3989 Measurement of airborne noise emitted by compressor units including prime movers [Rejected draft]
- ISO 3990 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting cements, fissure sealants and orthodontic bonding or luting materials [Under development; originally planned ISO 3990 was Modular co-ordination — Sizes for co-ordinating lengths and widths of openings in the horizontal plane]
- ISO 3991 Agricultural machinery — Robotic feed systems — Safety [Under development; originally planned ISO 3991 was Modular co-ordination — Sizes for co-ordinating heights of openings in the vertical plane]
- ISO 3992 Petroleum waxes — Determination of needle penetration [Rejected draft]
- ISO 3993:1984 Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method
- ISO 3994:2014 Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification
- ISO 3995:1985 Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
- ISO 3996:1995 Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
- ISO 3997 Bitumen and bituminous binders – Determination of needle penetration [Rejected draft]
- ISO 3998:1977 Textiles — Determination of resistance to certain insect pests
- ISO 3999:2004 Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests
- ISO 4000 – ISO 4499
- [edit]
- ISO 4000 Passenger car tyres and rims
- ISO 4000-1:2021 Part 1: Tyres (metric series)
- ISO 4000-2:2021 Part 2: Rims
- ISO 4001:1977 Shipbuilding — Inland navigation — Raft-type life-saving apparatus
- ISO 4002 Equipment for sowing and planting
- ISO 4002-1:1979 Part 1: Concave disks type D1 — Dimensions
- ISO 4002-2:1977 Part 2: Flat disks type D2 with single bevel — Dimensions
- ISO 4003:1977 Permeable sintered metal materials — Determination of bubble test pore size
- ISO 4004:1983 Agricultural tractors and machinery — Track widths
- ISO/IEC 4005 Telecommunications and information exchange between systems — Low altitude drone area network (LADAN) [Original draft ISO 4005 was deleted]
- ISO/IEC 4005-1 Part 1: Communication model and requirements [Under development]
- ISO/IEC 4005-2 Part 2: Physical and data link protocols for shared communication [Under development]
- ISO/IEC 4005-3 Part 3: Physical and data link protocols for control communication [Under development]
- ISO/IEC 4005-4 Part 4: Physical and data link protocols for video communication [Under development]
- ISO 4006:1991 Measurement of fluid flow in closed conduits – Vocabulary and symbols
- ISO 4007:2018 Personal protective equipment – Eye and face protection – Vocabulary
- ISO 4008 Road vehicles — Fuel injection pump testing
- ISO 4008-1:1980 Part 1: Dynamic conditions
- ISO 4008-2:1983 Part 2: Static conditions
- ISO 4008-3:1987 Part 3: Application and test procedures
- ISO 4009:2000 Commercial vehicles — Location of electrical and pneumatic connections between towing vehicles and trailers [Withdrawn without replacement]
- ISO 4010:1998 Diesel engines — Calibrating nozzle, delay pintle type
- ISO/TR 4011:1976 Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines [Withdrawn: replaced with ISO 11614]
- ISO 4012:1978 Concrete — Determination of compressive strength of test specimens [Withdrawn: replaced with ISO 1920-4]
- ISO 4013:1978 Concrete — Determination of flexural strength of test specimens [Withdrawn: replaced with ISO 1920-4]
- ISO 4014:2011 Hexagon head bolts — Product grades A and B
- ISO 4015:1979 Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
- ISO 4016:2011 Hexagon head bolts — Product grade C
- ISO 4017:2014 Fasteners — Hexagon head screws — Product grades A and B
- ISO 4018:2011 Hexagon head screws — Product grade C
- ISO 4019:2001 Structural steels — Cold-formed, welded, structural hollow sections — Dimensions and sectional properties [Withdrawn: replaced with ISO 10799-2]
- ISO 4020:2001 Road vehicles — Fuel filters for diesel engines — Test methods
- ISO 4021:1992 Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system
- ISO 4022:2018 Permeable sintered metal materials — Determination of fluid permeability
- ISO 4023:2009 Rubber hoses and hose assemblies for steam — Test methods
- ISO 4024:1992 Road vehicles — Ignition coils — Low-tension cable connections
- ISO 4025 The physical and mechanical properties of bagasse particleboards [Rejected draft]
- ISO 4026:2003 Hexagon socket set screws with flat point
- ISO 4027:2003 Hexagon socket set screws with cone point
- ISO 4028:2003 Hexagon socket set screws with dog point
- ISO 4029:2003 Hexagon socket set screws with cup point
- ISO 4030:1983 Road vehicles — Vehicle identification number (VIN) — Location and attachment
- ISO 4031:1978 Information interchange – Representation of local time differentials [Withdrawn: replaced with ISO 8601:1988]
- ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
- ISO 4033:2012 Hexagon high nuts (style 2) — Product grades A and B
- ISO 4034:2012 Hexagon regular nuts (style 1) — Product grade C [Withdrawn without replacement]
- ISO 4035:2012 Hexagon thin nuts chamfered (style 0) — Product grades A and B
- ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) — Product grade B [Withdrawn without replacement]
- ISO 4037 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy
- ISO 4037-1:1996 Part 1: Radiation characteristics and production
- ISO 4037-2:1997 Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV
- ISO 4037-3:1999 Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
- ISO 4037-4:2004 Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
- ISO 4038:1996 Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings
- ISO 4039 Road vehicles — Pneumatic braking systems
- ISO 4039-1:1998 Part 1: Pipes, male fittings and tapped holes with facial sealing surface
- ISO 4039-2:1998 Part 2: Pipes, male fittings and holes with conical sealing surface
- ISO 4040:2009 Road vehicles — Location of hand controls, indicators and tell-tales in motor vehicles
- ISO 4041:1978 Rotary drilling equipment — Rotary hoses [Withdrawn without replacement]
- ISO 4042:2018 Fasteners — Electroplated coating systems
- ISO 4043:2016 Simultaneous interpreting — Mobile booths — Requirements
- ISO 4044:2017 Leather — Chemical tests — Preparation of chemical test samples
- ISO 4045:2018 Leather — Chemical tests — Determination of pH and difference figure
- ISO 4046 Paper, board, pulps and related terms – Vocabulary
- ISO 4046-1:2016 Part 1: Alphabetical index
- ISO 4046-2:2016 Part 2: Pulping terminology
- ISO 4046-3:2016 Part 3: Paper-making terminology
- ISO 4046-4:2016 Part 4: Paper and board grades and converted products
- ISO 4046-5:2016 Part 5: Properties of pulp, paper and board
- ISO 4047:1977 Leather — Determination of sulphated total ash and sulphated water-insoluble ash
- ISO 4048:2018 Leather — Chemical tests — Determination of matter soluble in dichloromethane and free fatty acid content
- ISO 4049:2019 Dentistry — Polymer-based restorative materials
- ISO 4050:1977 Shipbuilding — Inland vessels — “Rhine” and Hall’s stockless anchors
- ISO 4051:1977 Shipbuilding — Inland vessels — Steering gear — Values of torques
- ISO 4052:1983 Coffee — Determination of caffeine content (Reference method) [Withdrawn without replacement]
- ISO 4053 Measurement of gas flow in conduits — Tracer methods
- ISO 4053-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 4053-4:1978 Part 4: Transit time method using radioactive tracers [Withdrawn without replacement]
- ISO 4054:1980 Couplers, loose spigots and base-plates for use in working scaffolds made of steel tubes — Requirements and test procedure [Withdrawn without replacement]
- ISO 4055:1977 Road vehicles — Caravans and light trailers — Electromagnetic braking [Withdrawn without replacement]
- ISO 4056:1978 Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index [Withdrawn: replaced with ISO 10162]
- ISO 4057:1986 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded [Withdrawn without replacement]
- ISO 4058:1977 Magnesium and its alloys — Determination of nickel — Photometric method using dimethylglyoxime [Withdrawn without replacement]
- ISO 4059:1978 Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
- ISO 4060 Road vehicles — Seat belts — Adjusting devices [Rejected draft]
- ISO 4061 Soldering — Quality requirements for soldering of metallic materials [Under development; original draft ISO 4061 was Road vehicles — Seat belts equipment with push-button buckles — Handling characteristics]
- ISO 4062:1977 Dictation equipment — Symbols [Withdrawn: replaced by ISO 13251]
- ISO 4063:2009 Welding and allied processes – Nomenclature of processes and reference numbers
- ISO 4064 Water meters for cold potable water and hot water
- ISO 4064-1:2014 Part 1: Metrological and technical requirements
- ISO 4064-2:2014 Part 2: Test methods
- ISO 4064-3:2014 Part 3: Test report format
- ISO 4064-4:2014 Part 4: Non-metrological requirements not covered in ISO 4064-1
- ISO 4064-5:2014 Part 5: Installation requirements
- ISO 4065:2018 Thermoplastics pipes — Universal wall thickness table
- ISO 4066:1994 Construction drawings — Bar scheduling [Withdrawn: replaced with ISO 3766]
- ISO 4067 Technical drawings — Installations
- ISO 4067-1:1984 Part 1: Graphical symbols for plumbing, heating, ventilation and ducting [Withdrawn without replacement]
- ISO 4067-2:1980 Part 2: Simplified representation of sanitary appliances [Withdrawn without replacement]
- ISO 4067-3:1984 Part 3: Graphical symbols for automatic control [Rejected draft later published as ISO/TR 8545]
- ISO 4067-6:1985 Part 6: Graphical symbols for supply water and drainage systems in the ground [Withdrawn without replacement]
- ISO 4068:1978 Building and civil engineering drawings — Reference lines [Withdrawn without replacement]
- ISO 4069:1977 Building and civil engineering drawings — Representation of areas on sections and views — General principles [Withdrawn without replacement]
- ISO 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength [Under development; originally planned standard with this number was a rejected draft with an unknown name]
- ISO 4071:1978 Indirect-reading capacitor-type pocket exposure meters and accessory electrometers [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
- ISO 4072:1982 Green coffee in bags — Sampling
- ISO 4073:2009 Dentistry — Information system on the location of dental equipment in the working area of the oral health care provider
- ISO 4074:2015 Natural latex rubber condoms – Requirements and test methods
- ISO 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength [Under development; originally planned standard with this number was a rejected draft with an unknown name]
- ISO 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength [Under development; originally planned standard with this number was a rejected draft with an unknown name]
- ISO 4077 Coal preparation plant — Guide to sampling in coal preparation plants [Under development; originally planned standard with this number was a rejected draft with an unknown name]
- ISO 4079:2020 Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification
- ISO 4080:2009 Rubber and plastics hoses and hose assemblies — Determination of permeability to gas
- ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification
- ISO 4082:1981 Road vehicles — Motor vehicles — Flasher units
- ISO 4083 Dental operating chair — General requirements [Rejected Draft]
- ISO 4084:1977 Aircraft — Repairable contactors (not hermetically sealed) — Performance requirements [Withdrawn without replacement]
- ISO 4085:1979 Shipbuilding — Inland navigation — Swing derricks [Withdrawn without replacement]
- ISO 4086:2001 Road vehicles — 90 semi-trailer fifth wheel kingpin — Interchangeability
- ISO 4087:2005 Micrographics – Microfilming of newspapers for archival purposes on 35 mm microfilm
- ISO/TR 4088:1977 Rubber Thread – Classification [Withdrawn without replacement]
- ISO 4089:1979 Shipbuilding — Inland navigation — Sealing rubber for covers of cargo hatches
- ISO 4090:2001 Photography — Medical radiographic cassettes/screens/films and hard-copy imaging films — Dimensions and specifications
- ISO 4091:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements
- ISO 4092:1988 Road vehicles — Diagnostic systems for motor vehicles — Vocabulary [Withdrawn without replacement]
- ISO 4093:1999 Diesel engines — Fuel injection pumps — High-pressure pipes for testing
- ISO 4094:2017 Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3
- ISO 4095:1998 Aerospace — Bihexagonal drives — Wrenching configuration — Metric series
- ISO 4096:1978 Essential oils (containing tertiary alcohols) — Evaluation of free alcohols content by determination of ester value after cold formylation [Withdrawn without replacement]
- ISO 4097:2020 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
- ISO 4098:2018 Leather — Chemical tests — Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter
- ISO 4099:1984 Cheese — Determination of nitrate and nitrite contents — Method by cadmium reduction and photometry [Withdrawn: replaced with ISO 14673-(1-3)]
- ISO 4100:1980 Road vehicles — World parts manufacturer identifier (WPMI) code
- ISO 4101:1983 Drawn steel wire for elevator ropes — Specifications
- ISO 4102:1984 Equipment for crop protection — Sprayers — Connection threading
- ISO 4103:1979 Concrete — Classification of consistency [Withdrawn without replacement]
- ISO 4104:1984 Dental zinc polycarboxylate cements [Withdrawn: replaced with ISO 9917]
- ISO 4105:1978 Textile machinery and accessories — Wires for flexible card clothings
- ISO 4106:2012 Motorcycles — Engine test code — Net power
- ISO 4107:2010 Commercial vehicles — Wheel-hub attachment dimensions
- ISO 4108:1980 Concrete — Determination of tensile splitting strength of test specimens [Withdrawn: replaced with ISO 1920-4]
- ISO 4109:1980 Fresh concrete — Determination of the consistency — Slump test [Withdrawn: replaced with ISO 1920-2]
- ISO 4110:1979 Fresh concrete — Determination of the consistency — Vebe test [Withdrawn: replaced with ISO 1920-2]
- ISO 4111:1979 Fresh concrete — Determination of consistency — Degree of compactibility (Compaction index) [Withdrawn: replaced with ISO 1920-2]
- ISO 4112:1990 Cereals and pulses — Guidance on measurement of the temperature of grain stored in bulk
- ISO 4113:2010 Road vehicles — Calibration fluids for diesel injection equipment
- ISO/TR 4114:1979 Road vehicles — Caravans and light trailers — Static load on ball couplings [Withdrawn without replacement]
- ISO 4115:1997 Air cargo equipment — Air/land pallet nets
- ISO 4116:1986 Air cargo equipment — Ground equipment requirements for compatibility with aircraft unit load devices
- ISO 4117:1993 Air and air/land cargo pallets — Specification and testing
- ISO 4118:2016 Air cargo — Non-certified lower deck containers — Design and testing
- ISO 4119:1995 Pulps — Determination of stock concentration
- ISO 4120:2021 Sensory analysis — Methodology — Triangle test
- ISO 4121:2003 Sensory analysis — Guidelines for the use of quantitative response scales
- ISO/TR 4122:1977 Equipment for working the soil — Dimensions of flat disks — Type A [Withdrawn without replacement]
- ISO 4123:1979 Belt conveyors — Impact rings for carrying idlers and discs for return idlers — Main dimensions
- ISO 4124:1994 Liquid hydrocarbons — Dynamic measurement — Statistical control of volumetric metering systems
- ISO 4125:1991 Dry fruits and dried fruits – Definitions and nomenclature
- ISO 4126 Safety devices for protection against excessive pressure
- ISO 4126-1:2013 Part 1: Safety valves
- ISO 4126-2:2018 Part 2: Bursting disc safety devices
- ISO 4126-3:2020 Part 3: Safety valves and bursting disc safety devices in combination
- ISO 4126-4:2013 Part 4: Pilot operated safety valves
- ISO 4126-5:2013 Part 5: Controlled safety pressure relief systems (CSPRS)
- ISO 4126-6:2014 Part 6: Application, selection and installation of bursting disc safety devices
- ISO 4126-7:2013 Part 7: Common data
- ISO 4126-9:2008 Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices
- ISO 4126-10:2010 Part 10: Sizing of safety valves for gas/liquid two-phase flow
- ISO 4127 Shipbuilding — Inland navigation — Fairleads
- ISO 4127-1:1979 Part 1: Two-lip fairleads
- ISO 4127-2:1979 Part 2: Two-Roller fairleads
- ISO 4128:1985 Aircraft — Air mode modular containers
- ISO 4129:2012 Road vehicles – Mopeds – Symbols for controls, indicators and tell-tales [Withdrawn without replacement]
- ISO 4130:1978 Road vehicles – Three-dimensional reference system and fiducial marks – Definitions
- ISO 4131:1979 Road vehicles — Dimensional codes for passenger cars
- ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series
- ISO 4133:1979 Meat and meat products — Determination of glucono-delta-lactone content (Reference method) [Withdrawn without replacement]
- ISO 4134:2021 Meat and meat products — Determination of L-(+)-glutamic acid content — Reference method
- ISO 4135:2022 Anaesthetic and respiratory equipment – Vocabulary
- ISO 4136:2012 Destructive tests on welds in metallic materials — Transverse tensile test
- ISO/TR 4137:1978 Plastics — Determination of modulus of elasticity by alternating flexure [Withdrawn without replacement]
- ISO 4138:2021 Passenger cars — Steady-state circular driving behaviour — Open-loop test methods
- ISO 4139:1979 Ferrosilicon – Determination of aluminium content – Flame atomic absorption spectrometric method
- ISO 4140:1979 Ferrochromium and ferrosilicochromium – Determination of chromium content – Potentiometric method
- ISO 4141 Road vehicles — Multi-core connecting cables
- ISO 4141-1:2019 Part 1: Test methods and requirements for basic performance sheathed cables
- ISO 4141-2:2019 Part 2: Test methods and requirements for high performance sheathed cables
- ISO 4141-3:2019 Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
- ISO 4141-4:2009 Part 4: Test methods and requirements for coiled cable assemblies
- ISO 4142:2002 Laboratory glassware — Test tubes
- ISO 4143:1981 Shipbuilding — Inland vessels — Open rowing lifeboats
- ISO 4144:2003 Pipework — Stainless steel fittings threaded in accordance with ISO 7-1
- ISO 4145:1986 Non-alloy steel fittings threaded to ISO 7-1
- ISO 4146:1980 Shipbuilding — Inland vessels — Manholes [Withdrawn: replaced by ISO 5894]
- ISO 4147:1997 Aerospace — Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 250 MPa (at ambient temperature)/235 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C — Dimensions
- ISO 4148:2004 Road vehicles — Special warning lamps — Dimensions
- ISO 4149:2005 Green coffee — Olfactory and visual examination and determination of foreign matter and defects
- ISO 4150:2011 Green coffee or raw coffee — Size analysis — Manual and machine sieving
- ISO 4151:1987 Road vehicles — Mopeds — Type, location and functions of controls [Withdrawn without replacement]
- ISO 4152 Glass‐reinforced thermosetting plastics (GRP) pipes — Determination of the apparent axial long‐term modulus of pipes subject to beam bending [Originally planned ISO 4152 was Welder’s test on non-alloy and low-alloy steels for manual metal arc welding]
- ISO 4153:1981 Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure
- ISO 4154 Traditional Chinese medicine — Sinomenium acutum stem [Under development]
- ISO 4155 Magnesium and magnesium alloys — Determination of nickel — Inductively coupled plasma optical emission spectrometric method [Under development]
- ISO 4156 Straight cylindrical involute splines — Metric module, side fit
- ISO 4156-1:2021 Part 1: Generalities
- ISO 4156-2:2021 Part 2: Dimensions
- ISO 4156-3:2021 Part 3: Inspection
- ISO 4157 Construction drawings – Designation systems
- ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium – Determination of silicon content – Gravimetric method
- ISO 4159:1978 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method
- ISO 4160 Hexagon nuts and bolts with flange, style 1 — Small Series — Product grade B [Draft merged into ISO 4161 and ISO 4162]
- ISO 4161:2012 Hexagon nuts with flange, style 2 — Coarse thread
- ISO 4162:2012 Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B
- ISO 4164:2012 Mopeds — Engine test code — Net power
- ISO 4165 Road vehicles — Electrical connections — Double-pole connection
- ISO 4166:1979 Hexagon nuts for fine mechanics — Product grade F [Withdrawn without replacement]
- ISO 4167:2012 Polyolefin agricultural twines
- ISO 4168:2002 Timekeeping instruments — Conditions for carrying out checks on radioluminescent deposits [Withdrawn without replacement]
- ISO 4169:1979 Office machines — Keyboards — Key numbering system and layout charts
- ISO 4170:1995 Air cargo equipment — Interline pallet nets
- ISO 4171:1993 Air cargo equipment — Interline pallets
- ISO 4172:1991 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated structures
- ISO 4173:1980 Ferromolybdenum – Determination of molybdenum content – Gravimetric method
- ISO 4174:1998 Cereals, oilseeds and pulses — Measurement of unit pressure loss in one-dimensional air flow through bulk grain
- ISO 4175:1979 Shipbuilding — Shipborne barges, series 1 — Main dimensions
- ISO 4176:1981 Fertilizers — Determination of nitrate nitrogen content — Nitron gravimetric method [Withdrawn without replacement]
- ISO 4177 Magnesium and magnesium alloys – Determination of chromium – Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown]
- ISO 4178:1980 Complete, filled transport packages — Distribution trials — Information to be recorded
- ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
- ISO 4180:2019 Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules
- ISO 4181 Magnesium and magnesium alloys — Determination of strontium — Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown]
- ISO 4182:1999 Motor vehicles — Measurement of variations in dipped-beam headlamp angle as a function of load [Withdrawn without replacement]
- ISO 4183:1995 Belt drives — Classical and narrow V-belts — Grooved pulleys (system based on datum width)
- ISO 4184:1992 Belt drives — Classical and narrow V-belts — Lengths in datum system
- ISO 4185:1980 Measurement of liquid flow in closed conduits – Weighing method
- ISO 4186:1980 Asparagus — Guide to storage
- ISO 4187:1980 Horse-radish — Guide to storage
- ISO 4188 Magnesium and magnesium alloys – Determination of arsenic – Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown]
- ISO 4189 Magnesium and magnesium alloys — Determination of sodium — Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown]
- ISO 4190 Lift (US: Elevator) installation
- ISO 4190-1:2010 Part 1: Class I, II, III and VI lifts [Withdrawn: replaced with ISO 8100-30]
- ISO 4190-2:2001 Part 2: Class IV lifts
- ISO 4190-3:1982 Part 3: Service lifts class V
- ISO 4190-5:2006 Part 5: Control devices, signals and additional fittings
- ISO 4190-6:1984 Part 6: Passenger lifts to be installed in residential buildings — Planning and selection [Withdrawn: replaced with ISO 8100-32]
- ISO/TR 4191:2014 Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
- ISO 4192:1981 Aluminium and aluminium alloys — Determination of lead content — Flame atomic absorption spectrometric method
- ISO 4193:1981 Aluminium and aluminium alloys — Determination of chromium content — Flame atomic absorption spectrometric method
- ISO 4194:1981 Magnesium alloys — Determination of zinc content — Flame atomic absorption spectrometric method
- ISO 4195:2012 Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods
- ISO 4196:1984 Graphical symbols — Use of arrows [Withdrawn: replaced with ISO 80416-2]
- ISO 4197:1989 Equipment for working the soil — Hoe blades — Fixing dimensions
- ISO 4198:1984 Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance
- ISO 4199:1979 Plain bearings — Shaft diameters for unsplit bushes [Withdrawn without replacement]
- ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
- ISO 4202:2016 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
- ISO 4203:1978 Parallel shank tools — Driving tenons and sockets — Dimensions [Withdrawn without replacement]
- ISO 4204:2016 Countersinks, 90°, with Morse taper shanks and detachable pilots
- ISO 4205:2016 Countersinks, 90°, with parallel shanks and solid pilots
- ISO 4206:2016 Counterbores with parallel shanks and solid pilots
- ISO 4207:2016 Counterbores with Morse taper shanks and detachable pilots
- ISO 4208:1977 Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions
- ISO 4209 Truck and bus tyres and rims (metric series)
- ISO 4209-1:2001 Part 1: Tyres
- ISO 4209-2:2020 Part 2: Rims
- ISO 4210 Cycles — Safety requirements for bicycles
- ISO 4210-1:2014 Part 1: Terms and definitions
- ISO 4210-2:2015 Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
- ISO 4210-3:2014 Part 3: Common test methods
- ISO 4210-4:2014 Part 4: Braking test methods
- ISO 4210-5:2014 Part 5: Steering test methods
- ISO 4210-6:2015 Part 6: Frame and fork test methods
- ISO 4210-7:2014 Part 7: Wheels and rims test methods
- ISO 4210-8:2014 Part 8: Pedal and drive system test methods
- ISO 4210-9:2014 Part 9: Saddles and seat-post test methods
- ISO 4211:1979 Furniture — Assessment of surface resistance to cold liquids
- ISO 4211-2:2013 Part 2: Assessment of resistance to wet heat
- ISO 4211-3:2013 Part 3: Assessment of resistance to dry heat
- ISO 4211-4:1988 Part 4: Assessment of resistance to impact
- ISO 4211-5:2021 Part 5: Assessment of resistance to abrasion
- ISO 4212 Corrosion of Metals and Alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel [Under development; original draft with this number unknown]
- ISO 4213.2 Information technology — Artificial Intelligence — Assessment of machine learning classification performance [Under development; original draft with this number unknown]
- ISO 4214 Milk and milk products — Determination of amino acids in infant formula and other dairy products [Under development; original draft with this number unknown]
- ISO 4215 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions [Under development; original draft with this number unknown]
- ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method [Original draft with this number unknown]
- ISO 4217:2015 Codes for the representation of currencies
- ISO 4218 Printing machines — Vocabulary
- ISO 4218-1:1979 Part 1: Fundamental terms
- ISO 4219:1979 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment
- ISO 4220:1983 Ambient air — Determination of a gaseous acid air pollution index — Titrimetric method with indicator or potentiometric end-point detection
- ISO 4221:1980 Air quality — Determination of mass concentration of sulphur dioxide in ambient air — Thorin spectrophotometric method
- ISO 4222 Ambient air — Measurement of particulate fall-out — Horizontal deposit gauge method [Rejected draft]
- ISO 4223 Definitions of some terms used in the tyre industry
- ISO 4223-1:2017 Part 1: Pneumatic tyres
- ISO 4223-2:1991 Part 2: Solid tyres
- ISO 4224:2000 Ambient air — Determination of carbon monoxide — Non-dispersive infrared spectrometric method
- ISO 4225:2020 Air quality – General aspects – Vocabulary
- ISO 4226:2007 Air quality – General aspects – Units of measurement
- ISO/TR 4227:1989 Planning of ambient air quality monitoring
- ISO 4228:1986 Spanners and wrenches — Spline drive ends for power socket wrenches
- ISO 4229:2017 Assembly tools for screws and nuts — Single-head engineer’s wrenches for lower torque applications — Maximum outside dimensions of heads and test torques
- ISO 4230:2016 Hand- and machine-operated circular screwing dies for taper pipe threads — R series
- ISO 4231:2016 Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
- ISO 4232 Office machines – Minimum information to be included in specification sheets
- ISO 4232-1:1979 Part 1: Duplicators [Withdrawn without replacement]
- ISO 4232-2:1980 Part 2: Document copying machines
- ISO 4232-3:1984 Part 3: Postal franking machines [Withdrawn without replacement]
- ISO 4233 Hot helium leak testing method for high temperature pressure-bearing components in nuclear fusion reactors [Under development; original draft with this number unknown]
- ISO 4238:1976 Cinematography — Optical printing ratios for enlargement and reduction of motion-picture film images — Specifications
- ISO 4240-1 Fine bubble technology — Environmental applications — Part 1: Inspection method using online particle counter in dissolved air flotation (DAF) plant [Under development; original draft with this number unknown, but relates to Cinematography]
- ISO 4241:2019 Cinematography — Projection film leader (time-based), trailer and cue marks — Specifications
- ISO 4242:1980 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Positions and width dimensions
- ISO 4243:1979 Cinematography — Picture image area and photographic sound record on 16 mm motion-picture release prints — Positions and dimensions
- ISO 4244:1979 Cinematography — Photographic sound record on 8 mm Type S motion-picture prints — Position and width dimensions [Withdrawn without replacement]
- ISO 4245 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications [Draft numbered as ISO 26, which the draft was a revision of]
- ISO 4246:1994 Cinematography – Vocabulary
- ISO 4247:1977 Jig bushes and accessories for drilling purposes — Dimensions [Withdrawn without replacement]
- ISO 4248:1978 Jig bushes – Definitions and nomenclature
- ISO 4249 Motorcycle tyres and rims (Code-designated series)
- ISO 4249-1:1985 Part 1: Tyres
- ISO 4249-2:1990 Part 2: Tyre load ratings
- ISO 4249-3:2010 Part 3: Rims
- ISO 4250 Earth-mover tyres and rims
- ISO 4250-1:2017 Part 1: Tyre designation and dimensions
- ISO 4250-2:2017 Part 2: Loads and inflation pressures
- ISO 4250-3:2020 Part 3: Rims
- ISO 4251 Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines
- ISO 4251-1:2019 Part 1: Tyre designation and dimensions, and approved rim contours
- ISO 4251-2:2019 Part 2: Tyre load ratings
- ISO 4251-3:2006 Part 3: Rims [Withdrawn: replaced with ISO 18804]
- ISO 4251-4:2010 Part 4: Tyre classification and nomenclature [Withdrawn without replacement]
- ISO 4251-5:1992 Part 5: Logging and forestry service tyres [Withdrawn: replaced with ISO 18807]
- ISO 4252:2007 Agricultural tractors — Operator’s workplace, access and exit — Dimensions
- ISO 4253:1993 Agricultural tractors — Operator’s seating accommodation — Dimensions
- ISO 4254 Agricultural machinery — Safety
- ISO 4254-1:2013 Part 1: General requirements
- ISO 4254-2:1986 Part 2: Anhydrous ammonia applicators [Withdrawn without replacement]
- ISO 4254-3:1992 Part 3: Tractors [Withdrawn: replaced with ISO 26322-(1,2)]
- ISO 4254-4:1990 Part 4: Forestry winches [Withdrawn: replaced by ISO 19472]
- ISO 4254-5:2018 Part 5: Power-driven soil-working machines
- ISO 4254-6:2020 Part 6: Sprayers and liquid fertilizer distributors
- ISO 4254-7:2017 Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters
- ISO 4254-8:2018 Part 8: Solid fertilizer distributors
- ISO 4254-9:2018 Part 9: Seed drills
- ISO 4254-10:2009 Part 10: Rotary tedders and rakes
- ISO 4254-11:2010 Part 11: Pick-up balers
- ISO 4254-12:2012 Part 12: Rotary disc and drum mowers and flail mowers
- ISO 4254-13:2012 Part 13: Large rotary mowers
- ISO 4254-14:2016 Part 14: Bale wrappers
- ISO 4254-15 Part 15: Row-crop flail mowers [Abandoned draft]
- ISO 4254-16:2018 Part 16: Portable agricultural grain augers
- ISO 4254-17:2022 Part 17: Root crop harvesters
- ISO 4256:1996 Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method
- ISO 4257:2001 Liquefied petroleum gases — Method of sampling
- ISO 4259 Petroleum and related products — Precision of measurement methods and results
- ISO 4259-1:2017 Part 1: Determination of precision data in relation to methods of test
- ISO 4259-2:2017 Part 2: Interpretation and application of precision data in relation to methods of test
- ISO 4259-3:2020 Part 3: Monitoring and verification of published precision data in relation to methods of test
- ISO 4259-4:2021 Part 4: Use of statistical control charts to validate ‘in-statistical-control’ status for the execution of a standard test method in a single laboratory
- ISO 4260:1987 Petroleum products and hydrocarbons — Determination of sulfur content — Wickbold combustion method [Withdrawn without replacement]
- ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
- ISO 4262:1993 Petroleum products — Determination of carbon residue — Ramsbottom method
- ISO 4263 Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test
- ISO 4263-1:2003 Part 1: Procedure for mineral oils
- ISO 4263-2:2003 Part 2: Procedure for category HFC hydraulic fluids
- ISO 4263-3:2015 Part 3: Anhydrous procedure for synthetic hydraulic fluids
- ISO 4263-4:2006 Part 4: Procedure for industrial gear oils
- ISO 4264:2018 Petroleum products — Calculation of cetane index of middle-distillate fuels by the four variable equation
- ISO 4265:1986 Petroleum products — Lubricating oils and additives — Determination of phosphorus content — Quinoline phosphomolybdate method [Withdrawn without replacement]
- ISO 4266 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods
- ISO 4266-1:2002 Part 1: Measurement of level in atmospheric tanks
- ISO 4266-2:2002 Part 2: Measurement of level in marine vessels
- ISO 4266-3:2002 Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
- ISO 4266-4:2002 Part 4: Measurement of temperature in atmospheric tanks
- ISO 4266-5:2002 Part 5: Measurement of temperature in marine vessels
- ISO 4266-6:2002 Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
- ISO 4267 Petroleum and liquid petroleum products — Calculation of oil quantities
- ISO 4267-1 Part 1: Static measurement [Rejected draft]
- ISO 4267-2:1988 Part 2: Dynamic measurement
- ISO 4268:2000 Petroleum and liquid petroleum products — Temperature measurements — Manual methods
- ISO 4269:2001 Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters
- ISO 4270 Petroleum products – Determination of density and relative density – Reischauer pyknometer method [Rejected draft]
- ISO 4271 Petroleum products – Determination of density and relative density – Conical pyknometer method [Rejected draft]
- ISO 4272 Intelligent transport systems — Truck platooning systems (TPS) — Functional and operational requirements [Under development; original draft with this number unknown]
- ISO 4273 Intelligent transport systems — Automated braking during low speed manoeuvring (ABLS) — Requirements and test procedures [Under development; original draft with this number unknown]
- ISO 4274:1977 Urea for industrial use — Determination of biuret content — Flame atomic absorption and photometric absorption methods [Withdrawn without replacement]
- ISO 4275:1977 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of arsenic content — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
- ISO 4276:1978 Anhydrous ammonia for industrial use — Evaluation of residue on evaporation — Gravimetric method [Withdrawn without replacement]
- ISO/TR 4277:2009 Cryolite, natural and artificial — Conventional test for evaluation of free fluorides content
- ISO 4278:1977 Sodium fluoride for industrial use — Determination of carbonate content — Gravimetric method [Withdrawn without replacement]
- ISO 4279:1977 Aluminium fluoride for industrial use — Determination of sodium content — Flame emission spectrophotometric method [Withdrawn without replacement]
- ISO 4280:1977 Cryolite, natural and artificial, and aluminium fluoride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
- ISO 4281:1977 Sodium hexafluorosilicate for industrial use — Determination of free acidity and total hexafluorosilicate content — Titrimetric method
- ISO 4282:1992 Acid-grade and ceramic-grade fluorspar — Determination of loss in mass at 105 degrees C [Withdrawn without replacement]
- ISO 4283:1993 All grades of fluorspar — Determination of carbonate content — Titrimetric method [Withdrawn without replacement]
- ISO 4284:1993 Acid-grade and ceramic-grade fluorspar — Determination of sulfide content — Iodometric method [Withdrawn without replacement]
- ISO 4285:1977 Phosphoric acid for industrial use — Guide to sampling techniques
- ISO 4286:2021 Intelligent transport systems — Use cases for sharing of probe data [Original draft with this number unknown]
- ISO 4287:1997 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters [Withdrawn: replaced with ISO 21920-2]
- ISO 4288:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Rules and procedures for the assessment of surface texture [Withdrawn: replaced with ISO 21920-3]
- ISO 4289 Recommendation and specification of HVOF cermet coatings for metallurgical roll components [Under development; originally planned ISO 4289 was Instruments for the measurement of surface roughness by the profile method contact (stylus) instruments of consecutive profile transformation – Profile recording instruments calibration and means]
- ISO 4290 Agricultural wheeled tractors and attachments — Front loaders — Dimensional and operational ratings [Under development; original draft with this number unknown]
- ISO 4291:1985 Methods for the assessment of departure from roundness – Measurement of variations in radius
- ISO 4292:1985 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods [Withdrawn without replacement]
- ISO 4293:1982 Manganese ores and concentrates — Determination of phosphorus content — Extraction-molybdovanadate photometric method
- ISO 4294:1984 Manganese ores and concentrates — Determination of copper content — Extraction-spectrometric and spectrometric methods [Withdrawn without replacement]
- ISO 4295:1988 Manganese ores and concentrates — Determination of aluminium content — Photometric and gravimetric methods
- ISO 4296 Manganese ores — Sampling
- ISO 4296-1:1984 Part 1: Increment sampling
- ISO 4296-2:1983 Part 2: Preparation of samples
- ISO 4297:1978 Manganese ores and concentrates — Methods of chemical analysis — General instructions
- ISO 4298:1984 Manganese ores and concentrates — Determination of manganese content — Potentiometric method
- ISO 4299:1989 Manganese ores — Determination of moisture content
- ISO 4300:1984 Manganese ores and concentrates — Determination of lead content — Polarographic methods [Withdrawn without replacement]
- ISO 4301 Cranes – Classification
- ISO 4301-1:2016 Part 1: General
- ISO 4301-2:2020 Part 2: Mobile cranes
- ISO 4301-3:2021 Part 3: Tower cranes
- ISO 4301-4:1989 Part 4: Jib cranes
- ISO 4301-5:1991 Part 5: Overhead travelling and portal bridge cranes
- ISO 4302:2016 Cranes — Wind load assessment
- ISO 4304:1987 Cranes other than mobile and floating cranes — General requirements for stability
- ISO 4305:2014 Mobile cranes — Determination of stability
- ISO 4306 Cranes – Vocabulary
- ISO 4306-1:2007 Part 1: General
- ISO 4306-2:2012 Part 2: Mobile cranes
- ISO 4306-3:2016 Part 3: Tower cranes
- ISO 4306-4:2020 Part 4: Jib cranes
- ISO 4306-5:2005 Part 5: Bridge and gantry cranes
- ISO 4307:2021 Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for saliva — Isolated human DNA [Original draft with this number was related to cranes]
- ISO 4308 Cranes and lifting appliances — Selection of wire ropes
- ISO 4308-1:2003 Part 1: General [Withdrawn: replaced with ISO 16625]
- ISO 4308-2:1988 Part 2: Mobile cranes — Coefficient of utilization [Withdrawn: replaced with ISO 16625]
- ISO 4309:2017 Cranes — Wire ropes — Care and maintenance, inspection and discard
- ISO 4310:2009 Cranes — Test code and procedures
- ISO 4311:1979 Anionic and non-ionic surface active agents — Determination of the critical micellization concentration — Method by measuring surface tension with a plate, stirrup or ring
- ISO 4312:1989 Surface active agents — Evaluation of certain effects of laundering — Methods of analysis and test for unsoiled cotton control cloth
- ISO 4313:1976 Washing powders — Determination of total phosphorus(V) oxide content — Quinoline phosphomolybdate gravimetric method
- ISO 4314:1977 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
- ISO 4315:1977 Surface active agents — Determination of alkalinity — Titrimetric method
- ISO 4316:1977 Surface active agents — Determination of pH of aqueous solutions — Potentiometric method
- ISO 4317:2011 Surface-active agents and detergents — Determination of water content — Karl Fischer methods
- ISO 4318:1989 Surface active agents and soaps — Determination of water content — Azeotropic distillation method
- ISO 4319:1977 Surface active agents — Detergents for washing fabrics — Guide for comparative testing of performance
- ISO 4320:1977 Non-ionic surface active agents — Determination of cloud point index — Volumetric method
- ISO 4321:1977 Washing powders — Determination of active oxygen content — Titrimetric method
- ISO 4322:1977 Non-ionic surface active agents — Determination of sulphated ash — Gravimetric method
- ISO 4323:2018 Soaps — Determination of chloride content — Potentiometric method
- ISO 4324:1977 Surface active agents — Powders and granules — Measurement of the angle of repose
- ISO 4325:1990 Soaps and detergents — Determination of chelating agent content — Titrimetric method
- ISO 4326:1980 Non-ionic surface active agents — Polyethoxylated derivatives — Determination of hydroxyl value — Acetic anhydride method
- ISO 4327:1979 Non-ionic surface active agents — Polyalkoxylated derivatives — Determination of hydroxyl value — Phthalic anhydride method
- ISO 4328 Centre holes [Rejected draft]
- ISO 4329 Shaft ends with woodruff keys [Rejected draft]
- ISO 4330:1994 Photography — Determination of the curl of photographic film and paper [Withdrawn: replaced with ISO 18910]
- ISO 4331:1986 Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on cellulose ester base — Specifications [Withdrawn: replaced with ISO 10602, now replaced with ISO 18901]
- ISO 4332:1986 Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications [Withdrawn: replaced with ISO 10602, now replaced with ISO 18901]
- ISO 4333 Textiles — Determination of reduction activity of specific proteins derived from pollen, mite and other sources on textile products [Under development; original draft with this number unknown]
- ISO 4334 Fruit puree — Specifications and test methods [Under development; original draft with this number unknown]
- ISO/IEC 4335:1993 Information technology —- Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Elements of procedures [Withdrawn: replaced with ISO/IEC 13239]
- ISO 4336:1981 Numerical control of machines — Specification of interface signals between the numerical control unit and the electrical equipment of an NC machine [Withdrawn without replacement]
- ISO 4337:1977 Information processing – Interchangeable magnetic twelve-disk pack (100 Mbytes) [Withdrawn without replacement]
- ISO 4338 Information processing – Magnetic tape cassette [Rejected draft; a later proposed ISO 4338 Conceptual model and system architecture of smart classroom was deleted in 2021]
- ISO 4339:2022 Information technology for learning, education and training — Reference model for information and communications technology (ICT) evaluation in education [Original draft with this number related to Information processing]
- ISO 4340 Water aggressiveness evaluation and optimized lining choice [Under development; original draft with this number related to Information processing]
- ISO 4341:1978 Information processing – Magnetic tape cassette and cartridge labelling and file structure for information interchange
- ISO 4342:1985 Numerical control of machines — NC processor input — Basic part program reference language
- ISO 4343:2000 Industrial automation systems — Numerical control of machines — NC processor output — Post processor commands
- ISO 4344:2004 Steel wire ropes for lifts — Minimum requirements
- ISO 4345:1988 Steel wire ropes — Fibre main cores — Specification
- ISO 4346:1977 Steel wire ropes for general purposes – Lubricants – Basic requirements
- ISO 4347:2015 Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths
- ISO 4348:1983 Flat-top chains and associated chain wheels for conveyors [Withdrawn without replacement]
- ISO 4349 Solid recovered fuels — Method for the determination of the Recycling-Index [Under development; original draft with this number was Genera! principles for the verification of safety of concrete structures]
- ISO 4351 Geometrical product specifications (GPS) — Association [Under development; original draft with this number unknown]
- ISO 4354:2009 Wind actions on structures
- ISO 4355:2013 Bases for design of structures — Determination of snow loads on roofs
- ISO 4356:1977 Bases for the design of structures — Deformations of buildings at the serviceability limit states [Withdrawn without replacement]
- ISO 4357 Rules for use of the I.S. system of units in buildings [Rejected draft]
- ISO 4358 Test methods for civil multi-copter unmanned aircraft system [Under development; original draft with this number unknown]
- ISO 4359:2013 Flow measurement structures – Rectangular, trapezoidal and U-shaped flumes
- ISO 4360:2020 Hydrometry – Open channel flow measurement using triangular profile weirs
- ISO 4361 Liquid flow measurement in open channels by weirs and flumes – Round nosed broad crested weirs [Rejected draft]
- ISO 4362:1999 Hydrometric determinations – Flow measurement in open channels using structures – Trapezoidal broad-crested weirs
- ISO 4363:2002 Measurement of liquid flow in open channels – Methods for measurement of characteristics of suspended sediment
- ISO 4364:1997 Measurement of liquid flow in open channels – Bed material sampling
- ISO 4365:2005 Liquid flow in open channels – Sediment in streams and canals – Determination of concentration, particle size distribution and relative density
- ISO 4366:2007 Hydrometry – Echo sounders for water depth measurements
- ISO 4369:1979 Measurement of liquid flow in open channels – Moving-boat method
- ISO 4370 Environmental life cycle assessment and recycling of ductile iron pipes for water applications [Under development; original draft with this number unknown]
- ISO 4371:1984 Measurement of liquid flow in open channels by weirs and flumes – End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method) [Withdrawn: replaced with ISO 18481]
- ISO 4373:2022 Hydrometry – Water level measuring devices
- ISO 4374:1990 Liquid flow measurement in open channels – Round-nose horizontal broad-crested weirs
- ISO 4375:2014 Hydrometry – Cableway systems for stream gauging
- ISO 4376 Cycle Energy Requirement — Acceptance Test [Under development; original draft with this number unknown]
- ISO 4377:2012 Hydrometric determinations – Flow measurement in open channels using structures – Flat-V weirs
- ISO 4378 Plain bearings – Terms, definitions, classification and symbols
- ISO 4378-1:2017 Part 1: Design, bearing materials and their properties
- ISO 4378-2:2017 Part 2: Friction and wear
- ISO 4378-3:2017 Part 3: Lubrication
- ISO 4378-4:2009 Part 4: Basic symbols
- ISO 4378-5:2009 Part 5: Application of symbols
- ISO/TR 4378-6:2012 Part 6: Abbreviated terms
- ISO 4379:2018 Plain bearings — Copper alloy bushes
- ISO 4380 Plain bearings – Method of calculation of hydrodynamic thrust bearings (Rejected draft; now covered by ISO 12131-1)
- ISO 4381:2011 Plain bearings — Tin casting alloys for multilayer plain bearings
- ISO 4382 Plain bearings — Copper alloys
- ISO 4382-1:2021 Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
- ISO 4382-2:2021 Part 2: Wrought copper alloys for solid plain bearings
- ISO 4383:2012 Plain bearings — Multilayer materials for thin-walled plain bearings
- ISO 4384 Plain bearings — Hardness testing of bearing metals
- ISO 4384-1:2019 Part 1: Multilayer bearings materials
- ISO 4384-2:2022 Part 2: Solid materials
- ISO 4385:1981 Plain bearings — Compression testing of metallic bearing materials
- ISO 4386 Plain bearings — Metallic multilayer plain bearings
- ISO 4386-1:2019 Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
- ISO 4386-3:2019 Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
- ISO 4387:2019 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- ISO 4388:1991 Cigarettes — Determination of the smoke condensate retention index of a filter — Direct spectrometric method
- ISO 4389:2000 Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas chromatographic method
- ISO 4391:1983 Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter symbols
- ISO 4392 Hydraulic fluid power — Determination of characteristics of motors
- ISO 4392-1:2002 Part 1: At constant low speed and constant pressure
- ISO 4392-2:2002 Part 2: Startability
- ISO 4392-3:1993 Part 3: At constant flow and at constant torque
- ISO 4393:2015 Fluid power systems and components — Cylinders — Basic series of piston strokes
- ISO 4394 Fluid power systems and components — Cylinder barrels
- ISO 4394-1:1980 Part 1: Requirements for steel tubes with specially finished bores [Withdrawn without replacement]
- ISO 4395:2009 Fluid power systems and components — Cylinder piston rod end types and dimensions
- ISO 4396 Telecommunications and information exchange between systems — Future network recursive inter-network architecture [Under development; original DPR with this number related to fluid power][5]
- ISO 4397:2011 Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
- ISO 4398 Intelligent transport systems — Guided transportation service planning data exchange [Under development; original DPR with this number related to fluid power][6]
- ISO 4399:2019 Fluid power systems and components — Connectors and associated components — Nominal pressures
- ISO 4400:1994 Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements
- ISO 4401:2005 Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
- ISO 4402:1991 Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant [Withdrawn: replaced with ISO 11171]
- ISO 4404 Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids
- ISO 4404-1:2012 Part 1: Water-containing fluids
- ISO 4404-2:2010 Part 2: Non-aqueous fluids
- ISO 4405:1991 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method
- ISO 4406:2021 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
- ISO 4407:2002 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
- ISO 4408 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method under incident light [Incomplete draft]
- ISO 4409 Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance
- ISO 4410 Experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding [Under development; original draft with this number unknown]
- ISO 4411:2019 Hydraulic fluid power — Valves — Determination of differential pressure/flow rate characteristics
- ISO 4412 Hydraulic fluid power – Test code for determination of airborne noise levels
- ISO 4412-1:1991 Part 1: Pumps
- ISO 4412-2:1991 Part 2: Motors
- ISO 4412-3:1991 Part 3: Pumps – Method using a parallelepiped microphone array
- ISO 4413:2010 Hydraulic fluid power – General rules and safety requirements for systems and their components
- ISO 4414:2010 Pneumatic fluid power — General rules and safety requirements for systems and their components
- ISO 4415:1981 Size designation of clothes — Men’s and boys’ underwear, nightwear and shirts [Withdrawn: replaced with ISO 8559-2]
- ISO 4416:1981 Size designation of clothes — Women’s and girls’ underwear, nightwear, foundation garments and shirts [Withdrawn: replaced with ISO 8559-2]
- ISO 4417:1977 Size designation of clothes — Headwear [Withdrawn: replaced with ISO 8559-2]
- ISO 4418:1978 Size designation of clothes — Gloves [Withdrawn: replaced with ISO 8559-2]
- ISO 4419 Health informatics — Reducing clinicians burden [Under development; original draft with this number unknown]
- ISO 4420 Fluid power control components [Rejected draft]
- ISO 4421 Health informatics — Introduction to Ayurveda [Under development; original draft with this number unknown]
- ISO 4422 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
- ISO 4422-1:1996 Part 1: General [Withdrawn: replaced with ISO 1452-1]
- ISO 4422-2:1996 Part 2: Pipes (with or without integral sockets) [Withdrawn: replaced with ISO 1452-2]
- ISO 4422-3:1996 Part 3: Fittings and joints [Withdrawn: replaced with ISO 1452-3]
- ISO 4422-4:1996 Part 4: Valves and ancillary equipment [Withdrawn: replaced with ISO 1452-4]
- ISO 4422-5:1996 Part 5: Fitness for purpose of the system [Withdrawn: replaced with ISO 1452-5]
- ISO 4424 Genomics Informatics— Data Elements and their Metadata for Describing the Tumor Mutation Burden (TMB) Information of Clinical Massive Parallel DNA Sequencing [Under development; original draft with this number unknown]
- ISO 4425 Genomics Informatics — Data elements and their metadata for describing the microsatellite instability (MSI) information of clinical massive parallel DNA sequencing [Under development; original draft with this number unknown]
- ISO 4426:2021 Intelligent transport systems — Lower layer protocols for usage in the European digital tachograph [Original draft with this number unknown]
- ISO 4434:1977 Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series [Withdrawn: replaced with ISO 1452-3]
- ISO 4469:1981 Wood — Determination of radial and tangential shrinkage [Withdrawn: replaced with ISO 13061-13]
- ISO 4481:1977 Cutlery and flatware – Nomenclature
- ISO 4500 – ISO 4999
- [edit]
- ISO 4548 Methods of test for full-flow lubricating oil filters for internal combustion engines
- ISO 4548-7:2012 Part 7: Vibration fatigue test
- ISO 4551:1987 Ferroalloys – Sampling and sieve analysis
- ISO 4552 Ferroalloys – Sampling and sample preparation for chemical analysis
- ISO 4552-1:1987 Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese
- ISO 4552-2:1987 Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium
- ISO 4570 Tyre valve threads[7]
- ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
- ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
- ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
- ISO 4618:2014 Paints and varnishes – Terms and definitions
- ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- ISO 4628-1 General introduction and designation system
- ISO 4628-2 Assessment of degree of blistering
- ISO 4628-3 Assessment of degree of rusting
- ISO 4628-4 Assessment of degree of cracking
- ISO 4628-5 Assessment of degree of flaking
- ISO 4628-6 Assessment of degree of chalking by tape method
- ISO 4628-7 Assessment of degree of chalking by velvet method
- ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
- ISO 4628-10 Assessment of degree of filiform corrosion
- ISO 4648:1991 Rubber, vulcanized or thermoplastic — Determination of dimensions of test pieces and products for test purposes [Withdrawn: replaced with ISO 23529]
- ISO 4661 Rubber, vulcanized — Preparation of samples and test pieces
- ISO 4661-1:1993 Rubber, vulcanized or thermoplastic — Preparation of samples and test pieces — Part 1: Physical tests [Withdrawn: replaced with ISO 23529]
- ISO 4661-2:2018 Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests
- ISO 4683 Raw sheep skins
- ISO 4683-1:1998 Part 1: Descriptions of defects
- ISO 4720:2009 Essential oils – Nomenclature
- ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
- ISO 4786:1977 Enclosed-scale adjustable-range thermometers [Withdrawn without replacement]
- ISO 4787:2010 Laboratory glassware – Volumetric instruments – Methods for testing of capacity and for use
- ISO 4788:2005 Laboratory glassware – Graduated measuring cylinders
- ISO 4791 Laboratory apparatus – Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica
- ISO 4791-1:1985 Part 1: Names for items of apparatus
- ISO 4795:1996 Glass for thermometer bulbs
- ISO 4801:1979 Glass alcoholometers and alcohol hydrometers not incorporating a thermometer
- ISO 4805:1982 Laboratory glassware – Thermo-alcoholometers and alcohol-thermohydrometers
- ISO 4824:1993 Dentistry — Ceramic denture teeth [Withdrawn: replaced with ISO 22112]
- ISO 4831:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of coliforms – Most probable number technique
- ISO 4832:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coliforms – Colony-count technique
- ISO 4833 Microbiology of the food chain – Horizontal method for the enumeration of microorganisms
- ISO 4833-1:2013 Part 1: Colony count at 30 degrees C by the pour plate technique
- ISO 4833-2:2013 Part 2: Colony count at 30 degrees C by the surface plating technique
- ISO 4848:1980 Concrete — Determination of air content of freshly mixed concrete — Pressure method [Withdrawn: replaced with ISO 1920-2]
- ISO 4858:1982 Wood — Determination of volumetric shrinkage [Withdrawn: replaced with ISO 13061-14]
- ISO 4859:1982 Wood — Determination of radial and tangential swelling [Withdrawn: replaced with ISO 13061-15]
- ISO 4860:1982 Wood — Determination of volumetric swelling [Withdrawn: replaced with ISO 13061-16]
- ISO 4866:2010 Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures
- ISO 4871:1996 Acoustics – Declaration and verification of noise emission values of machinery and equipment
- ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
- ISO 4875 Metal-cutting band saw blades
- ISO 4875-1:2006 Part 1: Vocabulary
- ISO 4880:1997 Burning behaviour of textiles and textile products – Vocabulary
- ISO 4882:1979 Office machines and data processing equipment – Line spacings and character spacings
- ISO 4885:2017 Ferrous materials – Heat treatments – Vocabulary
- ISO 4892 Plastics – Methods of exposure to laboratory light sources
- ISO 4902:1989 Information technology – Data communication – 37-pole DTE/DCE interface connector and contact number assignments
- ISO 4903:1989 Information technology – Data communication – 15-pole DTE/DCE interface connector and contact number assignments
- ISO/IEC 4909:2006 Identification cards – Financial transaction cards – Magnetic stripe data content for track 3
- ISO 4921:2000 Knitting – Basic concepts – Vocabulary
- ISO/IEC 4922-1 Information security — Secure multiparty computation
- ISO/IEC 4922-1:2023 Part 1: General
- ISO 4977 Double cold-reduced electrolytic tinplate
- ISO 4977-1:1984 Part 1: Sheet [Withdrawn: replaced with ISO 11949]
- ISO 4977-2:1984 Part 2: Coil for subsequent cutting into sheets [Withdrawn: replaced with ISO 11949]
- ISO 5006:2017 Earth-moving machinery – Operator’s field of view – Test method and performance criteria
- ISO 5010:2007 Earth-moving machinery – Rubber-tyred machines – Steering requirements
- ISO 5011:2014 Inlet air cleaning equipment for internal combustion engines and compressors – Performance testing
- ISO 5053 Industrial trucks – Terminology and classification
- ISO 5053-1:2015 Part 1: Types of industrial trucks
- ISO/IEC 5055:2021 Information technology — Software measurement — Software quality measurement — Automated source code quality measures
- ISO 5122:1979 Documentation – Abstract sheets in serial publications
- ISO 5123:1984 Documentation – Headers for microfiche of monographs and serials
- ISO 5127:2017 Information and documentation – Foundation and vocabulary
- ISO 5128:1980 Acoustics – Measurement of noise inside motor vehicles
- ISO 5129:2001 Acoustics – Measurement of sound pressure levels in the interior of aircraft during flight
- ISO 5130:2007 Acoustics – Measurements of sound pressure level emitted by stationary road vehicles
- ISO 5131:2015 Tractors for agriculture and forestry – Measurement of noise at the operator’s position – Survey method
- ISO 5135:1997 Acoustics – Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
- ISO 5136:2003 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method
- ISO 5138 Office machines – Vocabulary
- ISO 5138-1:1978 Part 1: Dictation equipment
- ISO 5138-2:1980 Part 2: Duplicators
- ISO 5138-3:1981 Part 3: Addressing machines
- ISO 5138-4:1981 Part 4: Letter opening machines
- ISO 5138-5:1981 Part 5: Letter folding machines
- ISO 5138-7:1986 Part 7: Postal franking machines
- ISO 5138-9:1984 Part 9: Typewriters
- ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
- ISO 5167-1:2003 Part 1: General principles and requirements
- ISO 5167-2:2003 Part 2: Orifice plates
- ISO 5167-3:2003 Part 3: Nozzles and Venturi nozzles
- ISO 5167-4:2003 Part 4: Venturi tubes
- ISO 5167-5:2016 Part 5: Cone meters
- ISO 5167-6:2019 Part 6: Wedge meters
- ISO 5168:2005 Measurement of fluid flow – Procedures for the evaluation of uncertainties
- ISO 5211:2017 Industrial valves – Part-turn actuator attachments
- ISO/IEC 5218:2004 Information technology — Codes for the representation of human sexes
- ISO/IEC 5230:2020 Information technology — OpenChain Specification
- ISO 5232:1998 Graphical symbols for textile machinery
- ISO 5234:2005 Textile machinery and accessories – Metallic card clothing – Definitions of dimensions, types and mounting
- ISO 5237:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 5 degrees 57′ [Withdrawn: replaced with ISO 8489-5]
- ISO 5238 Textile machinery and accessories – Packages of yarns and intermediate products
- ISO 5238-1:1982 Part 1: Terminology
- ISO 5239:1980 Textile machinery and accessories – Winding – Basic terms
- ISO 5247 Textile machinery and accessories – Weaving machines
- ISO 5247-1:2004 Part 1: Vocabulary and classification
- ISO 5247-3:1993 Part 3: Parts of the machine – Vocabulary
- ISO 5248:2003 Textile machinery and accessories – Dyeing and finishing machinery – Vocabulary for ancillary devices
- ISO 5250:2003 Textile machinery and accessories – Dyeing and finishing machinery – Terms for tentering and heat-treatment machinery
- ISO 5261:1995 Technical drawings – Simplified representation of bars and profile sections
- ISO 5284:1986 Conveyor belts – List of equivalent terms
- ISO 5288:2001 Synchronous belt drives – Vocabulary
- ISO 5323:1984 Solid wood parquet and raw parquet blocks – Vocabulary
- ISO 5329:1978 Solid wood paving blocks – Vocabulary
- ISO 5344:2004 Electrodynamic vibration generating systems – Performance characteristics
- ISO 5347 Methods for the calibration of vibration and shock pick-ups
- ISO 5347-8:1993 Part 8: Primary calibration by dual centrifuge
- ISO 5347-12:1993 Part 12: Testing of transverse shock sensitivity
- ISO 5347-13:1993 Part 13: Testing of base strain sensitivity
- ISO 5347-15:1993 Part 15: Testing of acoustic sensitivity
- ISO 5347-16:1993 Part 16: Testing of mounting torque sensitivity
- ISO 5347-17:1993 Part 17: Testing of fixed temperature sensitivity
- ISO 5347-18:1993 Part 18: Testing of transient temperature sensitivity
- ISO 5347-22:1997 Part 22: Accelerometer resonance testing – General methods
- ISO 5348:1998 Mechanical vibration and shock – Mechanical mounting of accelerometers
- ISO 5356 Anaesthetic and respiratory equipment – Conical connectors
- ISO 5356-1:2015 Part 1: Cones and sockets
- ISO 5356-2:2012 Part 2: Screw-threaded weight-bearing connectors
- ISO 5358:1992 Anaesthetic machines for use with humans
- ISO 5359:2014 Anaesthetic and respiratory equipment – Low-pressure hose assemblies for use with medical gases
- ISO 5360:2016 Anaesthetic vaporizers – Agent-specific filling systems
- ISO 5361:2016 Anaesthetic and respiratory equipment – Tracheal tubes and connectors
- ISO 5362:2006 Anaesthetic reservoir bags
- ISO 5364:2016 Anaesthetic and respiratory equipment – Oropharyngeal airways
- ISO 5366:2016 Anaesthetic and respiratory equipment – Tracheostomy tubes and connectors
- ISO 5367:2014 Anaesthetic and respiratory equipment – Breathing sets and connectors
- ISO 5391:2003 Pneumatic tools and machines – Vocabulary
- ISO 5396:1977 Hardmetal heading dies – Terminology
- ISO 5408:2009 Screw threads – Vocabulary
- ISO 5419:1982 Twist drills – Terms, definitions and types
- ISO 5420:1983 Reamers – Terms, definitions and types
- ISO 5426:1983 Information and documentation – Extension of the Latin alphabet coded character set for bibliographic information interchange[Note 3]
- ISO 5426-2:1996 Part 2: Latin characters used in minor European languages and obsolete typography
- ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange
- ISO 5428:1984 Greek alphabet coded character set for bibliographic information interchange
- ISO 5436 Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards
- ISO 5436-1:2000 Part 1: Material measures
- ISO 5436-2:2012 Part 2: Software measurement standards
- ISO 5445:1980 Ferrosilicon – Specification and conditions of delivery
- ISO 5446:2017 Ferromanganese – Specification and conditions of delivery
- ISO 5447:1980 Ferrosilicomanganese – Specification and conditions of delivery
- ISO 5448:1981 Ferrochromium – Specification and conditions of delivery
- ISO 5449:1980 Ferrosilicochromium – Specification and conditions of delivery
- ISO 5450:1980 Ferrotungsten – Specification and conditions of delivery
- ISO 5451:1980 Ferrovanadium – Specification and conditions of delivery
- ISO 5452:1980 Ferromolybdenum – Specification and conditions of delivery
- ISO 5453:1980 Ferroniobium – Specification and conditions of delivery
- ISO 5454:1980 Ferrotitanium – Specification and conditions of delivery
- ISO 5455:1979 Technical drawings – Scales
- ISO 5456 Technical drawings – Projection methods
- ISO 5456-1:1996 Part 1: Synopsis
- ISO 5456-2:1996 Part 2: Orthographic representations
- ISO 5456-3:1996 Part 3: Axonometric representations
- ISO 5456-4:1996 Part 4: Central projection
- ISO 5457:1999 Technical product documentation – Sizes and layout of drawing sheets
- ISO 5458:1998 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing
- ISO 5459:2011 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems
- ISO 5479:1997 Statistical interpretation of data – Tests for departure from the normal distribution
- ISO 5492:2008 Sensory analysis – Vocabulary
- ISO 5496:2006 Sensory analysis – Methodology – Initiation and training of assessors in the detection and recognition of odours
- ISO 5507:2002 Oilseeds, vegetable oils and fats – Nomenclature
- ISO 5526:2013 Cereals, pulses and other food grains – Nomenclature
- ISO 5527:2015 Cereals – Vocabulary
- ISO 5572:1987 Shipbuilding and marine structures – Numbering of equipment and structural elements in ships
- ISO 5576:1997 Non-destructive testing – Industrial X-ray and gamma-ray radiology – Vocabulary
- ISO 5577:2017 Non-destructive testing – Ultrasonic testing – Vocabulary
- ISO 5593:1997 Rolling bearings – Vocabulary
- ISO 5598:2008 Fluid power systems and components – Vocabulary
- ISO 5652:1984 Information processing – 9-Track, 12,7 mm (0.5 in) wide magnetic tape for information interchange – Format and recording, using group coding at 246 cpmm (6 250 cpi)
- ISO 5653:1980 Information processing – Interchangeable magnetic twelve-disk pack (200 Mbytes)
- ISO 5654 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on one side
- ISO 5654-1:1984 Part 1: Dimensional, physical and magnetic characteristics
- ISO 5654-2:1985 Part 2: Track format
- ISO 5659 Plastics – Smoke generation
- ISO 5659-1:1996 Part 1: Guidance on optical-density testing [Withdrawn: replaced by ISO 5659-2:2012]
- ISO 5659-2:2017 Part 2: Determination of optical density by a single-chamber test
- ISO/TR 5659-3:1999 Part 3: Determination of optical density by a dynamic-flow method [Withdrawn, no replacement]
- ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
- ISO 5660-1 Heat release rate (cone calorimeter method)
- ISO 5660-2 Smoke production rate (dynamic measurement)
- ISO/TS 5660-3 Guidance on measurement
- ISO 5681:1992 Equipment for crop protection – Vocabulary
- ISO 5702:1983 Equipment for harvesting – Combine harvester component parts – Equivalent terms
- ISO 5725 Accuracy (trueness and precision) of measurement methods and results
- ISO 5725-1:1994 Part 1: General principles and definitions
- ISO 5725-2:1994 Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- ISO 5725-3:1994 Part 3: Intermediate measures of the precision of a standard measurement method
- ISO 5725-4:1994 Part 4: Basic methods for the determination of the trueness of a standard measurement method
- ISO 5725-5:1998 Part 5: Alternative methods for the determination of the precision of a standard measurement method
- ISO 5725-6:1994 Part 6: Use in practice of accuracy values
- ISO 5742:2004 Pliers and nippers – Nomenclature
- ISO 5775 Bicycle tires and rims
- ISO 5776 Graphic technology – Symbols for text correction
- ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
- ISO 5806:1984 Information processing – Specification of single-hit decision tables
- ISO 5807:1985 Information processing – Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts
- ISO 5826:2014 Resistance welding equipment – Transformers – General specifications applicable to all transformers
- ISO 5832 Implants for surgery – Metallic materials
- ISO 5832-1:2016 Part 1: Wrought stainless steel
- ISO 5832-2:1999 Part 2: Unalloyed titanium
- ISO 5832-3:2016 Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
- ISO 5832-4:2014 Part 4: Cobalt-chromium-molybdenum casting alloy
- ISO 5832-5:2005 Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
- ISO 5832-6:1997 Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
- ISO 5832-7:2016 Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
- ISO 5832-8:1997 Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy
- ISO 5832-9:2007 Part 9: Wrought high nitrogen stainless steel
- ISO 5832-11:2014 Part 11: Wrought titanium 6-aluminium 7-niobium alloy
- ISO 5832-12:2007 Part 12: Wrought cobalt-chromium-molybdenum alloy
- ISO 5832-14:2007 Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
- ISO 5833:2002 Implants for surgery – Acrylic resin cements
- ISO 5834 Implants for surgery – Ultra-high-molecular-weight polyethylene
- ISO 5834-1:2005 Part 1: Powder form
- ISO 5834-2:2011 Part 2: Moulded forms
- ISO 5834-3:2005 Part 3: Accelerated ageing methods
- ISO 5834-4:2005 Part 4: Oxidation index measurement method
- ISO 5834-5:2005 Part 5: Morphology assessment method
- ISO 5835:1991 Implants for surgery – Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread – Dimensions
- ISO 5836:1988 Implants for surgery – Metal bone plates – Holes corresponding to screws with asymmetrical thread and spherical under-surface
- ISO 5837 Implants for surgery – Intramedullary nailing systems
- ISO 5837-1:1985 Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section
- ISO 5838 Implants for surgery – Metallic skeletal pins and wires[Note 3]
- ISO 5838-1:2013 Part 1: General requirements
- ISO 5838-2:1991 Part 2: Steinmann skeletal pins – Dimensions
- ISO 5838-3:1993 Part 3: Kirschner skeletal wires
- ISO 5840 Cardiovascular implants – Cardiac valve prostheses
- ISO 5840-1:2015 Part 1: General requirements
- ISO 5840-2:2015 Part 2: Surgically implanted heart valve substitutes
- ISO 5840-3:2013 Part 3: Heart valve substitutes implanted by transcatheter techniques
- ISO 5841 Implants for surgery – Cardiac pacemakers
- ISO 5841-2:2014 Part 2: Reporting of clinical performance of populations of pulse generators or leads
- ISO 5841-3:2013 Part 3: Low-profile connectors (IS-1) for implantable pacemakers
- ISO 5843 Aerospace – List of equivalent terms[Note 3]
- ISO 5843-1:1985 Part 1: Aerospace electrical equipment
- ISO 5843-2:1990 Part 2: Aerospace rivets
- ISO 5843-3:1997 Part 3: Aerospace bolts and nuts
- ISO 5843-4:1990 Part 4: Flight dynamics
- ISO 5843-5:1990 Part 5: Environmental and operating conditions for aircraft equipment
- ISO 5843-6:1985 Part 6: Standard atmosphere
- ISO 5843-8:1988 Part 8: Aircraft reliability
- ISO 5843-9:1988 Part 9: Aircraft
- ISO 5843-10:1988 Part 10: Aircraft structure
- ISO 5845 Technical drawings – Simplified representation of the assembly of parts with fasteners
- ISO 5845-1:1995 Part 1: General principles
- ISO 5845-2:1995 Part 2: Rivets for aerospace equipment
- ISO 5859:2014 Aerospace series – Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
- ISO 5878:1982 Reference atmospheres for aerospace use
- ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
- ISO 5963:1985 Documentation – Methods for examining documents, determining their subjects, and selecting indexing terms
- ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
- ISO 5967:1981 Taps and thread cutting – Nomenclature of the main types and terminology
- ISO 5968:1981 Circular screwing dies – Terminology
- ISO 5971:1981 Size designation of clothes – Pantyhose
- ISO 5989:1995 Photography – Pre-packaged chemicals for the processing of silver halide based photographic materials – Vocabulary
- ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
- ISO 6009:2016 Hypodermic needles for single use – Colour coding for identification
- ISO 6011:2003 Earth-moving machinery – Visual display of machine operation
- ISO 6050:1987 Shipbuilding – Bulbous bow and side thruster symbols
- ISO 6068:1985 Information processing – Recording characteristics of instrumentation magnetic tape (including telemetry systems) – Interchange requirements
- ISO 6070:1981 Auxiliary tables for vibration generators – Methods of describing equipment characteristics
- ISO 6078:1982 Black tea – Vocabulary
- ISO 6093:1985 Information processing – Representation of numerical values in character strings for information interchange
- ISO 6098:1984 Information processing – Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape
- ISO 6107 Water quality—Vocabulary
- ISO 6107-1:2004 (No part title)
- ISO 6107-2:2006 (No part title)
- ISO 6107-3:1993 (No part title)
- ISO 6107-4:1993 (No part title)
- ISO 6107-5:2004 (No part title)
- ISO 6107-6:2004 (No part title)
- ISO 6107-7:2006 (No part title)
- ISO 6107-8:1993 (No part title)
- ISO 6107-9:1997 Part 9: Alphabetical list and subject index
- ISO 6152:1982 Thermometers for use with alcoholometers and alcohol hydrometers
- ISO 6160:1979 Programming languages – PL/1
- ISO 6165:2012 Earth-moving machinery – Basic types – Identification and terms and definitions
- ISO 6166:2013 Securities and related financial instruments – International securities identification numbering system (ISIN)
- ISO 6173:1982 Open-end spinning machines – Vocabulary
- ISO 6188:1986 Plastics — Poly(alkylene terephthalate) granules — Determination of water content [Withdrawn: replaced with ISO 15512]
- ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
- ISO 6194-2:2009 Part 2: Vocabulary
- ISO 6194-5 Identification of visual imperfections
- ISO 6196 Micrographics – Vocabulary
- ISO 6196-1:1993 Part 1: General terms
- ISO 6196-2:1993 Part 2: Image positions and methods of recording
- ISO 6196-3:1997 Part 3: Film processing
- ISO 6196-4:1998 Part 4: Materials and packaging
- ISO 6196-5:1987 Part 5: Quality of images, legibility, inspection
- ISO 6196-6:1992 Part 6: Equipment
- ISO 6196-7:1992 Part 7: Computer micrographics
- ISO 6196-8:1998 Part 8: Use
- ISO 6196-10:1999 Part 10: Index
- ISO 6206:1979 Chemical products for industrial use – Sampling – Vocabulary
- ISO 6217:1982 Shipbuilding – Inland navigation – Pilot craft – Identification painting and inscriptions
- ISO 6222:1999 Water quality – Enumeration of culturable micro-organisms – Colony count by inoculation in a nutrient agar culture medium
- ISO 6284:1996 Construction drawings – Indication of limit deviations
- ISO 6289:2003 Skis – Vocabulary
- ISO 6336 Calculation of load capacity of spur and helical gears
- ISO 6344 Coated abrasives – Grain size analysis
- ISO 6345:1990 Shipbuilding and marine structures – Windows and side scuttles – Vocabulary
- ISO 6346 Freight containers – Coding, identification and marking
- ISO 6348:1980 Textiles – Determination of mass – Vocabulary
- ISO 6352:1985 Ferronickel – Determination of nickel content – Dimethylglyoxime gravimetric method
- ISO 6354:1982 Adhesives – Vocabulary [Withdrawn: replaced with ISO 472]
- ISO 6355:1988 Textile glass – Vocabulary [Withdrawn: replaced with ISO 472]
- ISO 6357:1985 Documentation – Spine titles on books and other publications
- ISO 6372:2017 Nickel and nickel alloys – Terms and definitions
- ISO 6385:2016 Ergonomics principles in the design of work systems
- ISO 6393:2008 Earth-moving machinery – Determination of sound power level – Stationary test conditions
- ISO 6394:2008 Earth-moving machinery – Determination of emission sound pressure level at operator’s position – Stationary test conditions
- ISO 6395:2008 Earth-moving machinery – Determination of sound power level – Dynamic test conditions
- ISO 6396:2008 Earth-moving machinery – Determination of emission sound pressure level at operator’s position – Dynamic test conditions
- ISO 6405 Earth-moving machinery – Symbols for operator controls and other displays
- ISO 6405-1:2017 Part 1: Common symbols
- ISO 6405-2:2017 Part 2: Symbols for specific machines, equipment and accessories
- ISO 6410 Technical drawings – Screw threads and threaded parts
- ISO 6410-1:1993 Part 1: General conventions
- ISO 6410-2:1993 Part 2: Screw thread inserts
- ISO 6410-3:1993 Part 3: Simplified representation
- ISO 6411:1982 Technical drawings – Simplified representation of centre holes
- ISO 6412 Technical drawings – Simplified representation of pipelines
- ISO 6412-1:2017 Part 1: General rules and orthogonal representation
- ISO 6412-2:2017 Part 2: Isometric projection
- ISO 6412-3:2017 Part 3: Terminal features of ventilation and drainage systems
- ISO 6413:1988 Technical drawings – Representation of splines and serrations
- ISO 6414:1982 Technical drawings for glassware
- ISO 6416:2017 Hydrometry – Measurement of discharge by the ultrasonic transit time (time of flight) method
- ISO 6420:2016 Hydrometry – Position fixing equipment for hydrometric boats
- ISO 6421:2012 Hydrometry – Methods for assessment of reservoir sedimentation
- ISO 6422 Layout key for trade documents
- ISO 6422-1:2010 Part 1: Paper-based documents
- ISO 6425:1996 Divers’ watches
- ISO 6426 Horological vocabulary
- ISO 6426-1:1982 Part 1: Technical and scientific definitions
- ISO 6426-2:2002 Part 2: Technical and commercial definitions
- ISO 6428:1982 Technical drawings – Requirements for microcopying
- ISO/IEC 6429:1992 Information technology – Control functions for coded character sets
- ISO 6433:2012 Technical product documentation – Part references
- ISO 6438:1983 Documentation – African coded character set for bibliographic information interchange
- ISO 6461 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia)
- ISO 6461-1:1986 Part 1: Method by enrichment in a liquid medium
- ISO 6461-2:1986 Part 2: Method by membrane filtration
- ISO 6467:1980 Ferrovanadium – Determination of vanadium content – Potentiometric method
- ISO 6472:2017 Rubber compounding ingredients – Abbreviated terms
- ISO 6474 Implants for surgery – Ceramic materials
- ISO 6474-1:2010 Part 1: Ceramic materials based on high purity alumina
- ISO 6474-2:2012 Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement
- ISO 6475:1989 Implants for surgery – Metal bone screws with asymmetrical thread and spherical under-surface – Mechanical requirements and test methods
- ISO 6501:1988 Ferronickel – Specification and delivery requirements
- ISO 6512:1982 Building construction — Modular coordination — Storey heights and room heights [Withdrawn: replaced with ISO 21723]
- ISO 6513:1982 Building construction — Modular coordination — Series of preferred multimodular sizes for horizontal dimensions [Withdrawn: replaced with ISO 21723]
- ISO 6514:1982 Building construction — Modular coordination — Sub-modular increments [Withdrawn: replaced with ISO 21723]
- ISO 6518 Road vehicles – Ignition systems
- ISO 6518-1:2002 Part 1: Vocabulary
- ISO/IEC 6522:1992 Information technology – Programming languages – PL/1 general purpose subset
- ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
- ISO 6531:2017 Machinery for forestry – Portable chain-saws – Vocabulary
- ISO 6552:1980 Automatic steam traps – Definition of technical terms
- ISO 6579 Microbiology of the food chain – Horizontal method for the detection, enumeration and serotyping of Salmonella[Note 3]
- ISO 6579-1:2017 Part 1: Detection of Salmonella spp.
- ISO/TS 6579-2:2012 Part 2: Enumeration by a miniaturized most probable number technique
- ISO/TR 6579-3:2014 Part 3: Guidelines for serotyping of Salmonella spp.
- ISO 6586:1980 Data processing – Implementation of the ISO 7- bit and 8- bit coded character sets on punched cards
- ISO 6590 Packaging – Sacks – Vocabulary and types
- ISO 6590-1:1983 Part 1: Paper sacks
- ISO 6590-2:1986 Part 2: Sacks made from thermoplastic flexible film
- ISO 6594 Cast iron drainage pipes and fittings – Spigot series
- ISO 6596 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using two-frequency recording at 7 958 ftprad, 1.9 tpmm (48 tpi), on one side
- ISO 6596-1:1985 Part 1: Dimensional, physical and magnetic characteristics
- ISO 6596-2:1985 Part 2: Track format
- ISO 6611:2004 Milk and milk products – Enumeration of colony-forming units of yeasts and/or moulds – Colony-count technique at 25 degrees C
- ISO 6621 Internal combustion engines – Piston rings
- ISO 6621-1:2007 Part 1: Vocabulary
- ISO 6630:1986 Documentation – Bibliographic control characters
- ISO 6689 Equipment for harvesting – Combines and functional components
- ISO 6689-1:1997 Part 1: Vocabulary
- ISO 6706:1981 Plastics laboratory ware – Graduated measuring cylinders
- ISO 6707 Buildings and civil engineering works – Vocabulary
- ISO 6707-1:2014 Part 1: General terms
- ISO 6707-2:2014 Part 2: Contract terms
- ISO 6707-3:2017 Part 3: Sustainability terms
- ISO 6709:2008 Standard representation of geographic point location by coordinates
- ISO 6710:2017 Single-use containers for human venous blood specimen collection
- ISO 6725:1981 Road vehicles – Dimensions of two-wheeled mopeds and motorcycles – Terms and definitions
- ISO 6726:1988 Mopeds and motorcycles with two wheels – Masses – Vocabulary
- ISO 6727:2012 Road vehicles – Motorcycles – Symbols for controls, indicators and tell-tales
- ISO 6730:2005 Milk – Enumeration of colony-forming units of psychrotrophic microorganisms – Colony-count technique at 6,5 degrees C
- ISO 6747:2013 Earth-moving machinery – Dozers – Terminology and commercial specifications
- ISO 6780:2003 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances, reviewed and confirmed 2014 [3]
- ISO 6798:1995 Reciprocating internal combustion engines – Measurement of emitted airborne noise – Engineering method and survey method
- ISO 6811:1998 Spherical plain bearings – Vocabulary
- ISO 6813:1998 Road vehicles – Collision classification – Terminology
- ISO 6814:2009 Machinery for forestry – Mobile and self-propelled machinery – Terms, definitions and classification
- ISO 6861:1996 Information and documentation – Glagolitic alphabet coded character set for bibliographic information interchange
- ISO 6862:1996 Information and documentation – Mathematical coded character set for bibliographic information interchange
- ISO 6871 Dental base metal casting alloys
- ISO 6871-1:1994 Part 1: Cobalt-based alloys [Withdrawn: replaced with ISO 22674]
- ISO 6871-2:1994 Part 2: Nickel-based alloys [Withdrawn: replaced with ISO 22674]
- ISO 6883:2017 Animal and vegetable fats and oils – Determination of conventional mass per volume (litre weight in air)
- ISO 6887 Microbiology of the food chain – Preparation of test samples, initial suspension and decimal dilutions for microbiological examination[Note 3]
- ISO 6887-1:2017 Part 1: General rules for the preparation of the initial suspension and decimal dilutions
- ISO 6887-2:2017 Part 2: Specific rules for the preparation of meat and meat products
- ISO 6887-3:2017 Part 3: Specific rules for the preparation of fish and fishery products
- ISO 6887-4:2017 Part 4: Specific rules for the preparation of miscellaneous products
- ISO 6887-5:2010 Part 5: Specific rules for the preparation of milk and milk products
- ISO 6887-6:2013 Part 6: Specific rules for the preparation of samples taken at the primary production stage
- ISO 6888 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)
- ISO 6888-1:1999 Part 1: Technique using Baird-Parker agar medium
- ISO 6888-2:1999 Part 2: Technique using rabbit plasma fibrinogen agar medium
- ISO 6888-3:2003 Part 3: Detection and MPN technique for low numbers
- ISO 6892 Metallic materials – Tensile testing
- ISO 6892-1 Method of test at room temperature
- ISO 6892-2 Method of test at elevated temperature
- ISO 6892-3 Method of test at low temperature
- ISO 6892-4 Method of test in liquid helium
- ISO 6926:2016 Acoustics – Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- ISO 6927:2012 Buildings and civil engineering works – Sealants – Vocabulary
- ISO 6929:2013 Steel products – Vocabulary
- ISO 6936:1988 Information processing – Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2)
- ISO/IEC 6937:2001 Information technology – Coded graphic character set for text communication – Latin alphabet
- ISO 6938:2012 Textiles – Natural fibres – Generic names and definitions
- ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
- ISO 6951:1986 Information processing – Processor system bus interface (Eurobus A)
- ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 1: General guidelines and calculation of composition
- ISO 6974-2:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 2: Uncertainty calculations
- ISO 6974-3:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
- ISO 6974-4:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
- ISO 6974-5:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
- ISO 6974-6: 2008 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
- ISO 6980 Nuclear energy – Reference beta-particle radiation
- ISO 6980-1:2006 Part 1: Methods of production
- ISO 6980-2:2004 Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
- ISO 6980-3:2006 Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
- ISO 7000:2014 Graphical symbols for use on equipment – Registered symbols
- ISO 7001:2007 Graphical symbols – Public information symbols
- ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
- ISO 7010:2011 Graphical symbols – Safety colours and safety signs – Registered safety signs
- ISO 7029:2017 Acoustics – Statistical distribution of hearing thresholds related to age and gender
- ISO 7056:1981 Plastics laboratory ware – Beakers
- ISO/IEC 7064:2003 Information technology – Security techniques – Check character systems
- ISO 7065 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides
- ISO 7065-1:1985 Part 1: Dimensional, physical and magnetic characteristics
- ISO 7065-2:1985 Part 2: Track format
- ISO 7066 Assessment of uncertainty in the calibration and use of flow measurement devices
- ISO 7066-2:1988 Part 2: Non-linear calibration relationships
- ISO 7078:1985 Building construction – Procedures for setting out, measurement and surveying – Vocabulary and guidance notes
- ISO 7083:1983 Technical drawings – Symbols for geometrical tolerancing – Proportions and dimensions
- ISO 7087:1984 Ferroalloys – Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
- ISO 7088:1981 Fish-meal – Vocabulary
- ISO 7089:2000 Plain washers — Normal series — Product grade A
- ISO 7090:2000 Plain washers, chamfered — Normal series — Product grade A
- ISO 7091:2000 Plain washers — Normal series — Product grade C
- ISO 7092:2000 Plain washers — Small series — Product grade A
- ISO 7093:2000 Plain washers — Large series
- ISO 7098:2015 Information and documentation – Romanization of Chinese
- ISO 7112:2017 Machinery for forestry – Portable brush-cutters and grass-trimmers – Vocabulary
- ISO 7130:2013 Earth-moving machinery – Operator training – Content and methods
- ISO 7131:2009 Earth-moving machinery – Loaders – Terminology and commercial specifications
- ISO 7132:2003 Earth-moving machinery – Dumpers – Terminology and commercial specifications
- ISO 7133:2013 Earth-moving machinery – Scrapers – Terminology and commercial specifications
- ISO 7134:2013 Earth-moving machinery – Graders – Terminology and commercial specifications
- ISO 7135:2009 Earth-moving machinery – Hydraulic excavators – Terminology and commercial specifications
- ISO 7136:2006 Earth-moving machinery – Pipelayers – Terminology and commercial specifications
- ISO 7137:1995 Aircraft – Environmental conditions and test procedures for airborne equipment
- ISO 7144:1986 Documentation – Presentation of theses and similar documents
- ISO 7151:1988 Surgical instruments – Non-cutting, articulated instruments – General requirements and test methods
- ISO 7152:1997 Camping tents and caravan awnings – Vocabulary and list of equivalent terms
- ISO 7153 Surgical instruments – Materials
- ISO 7153-1:2016 Part 1: Metals
- ISO 7154:1983 Documentation – Bibliographic filing principles
- ISO 7176 Wheelchairs
- ISO 7176-21:2009 Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
- ISO 7176-26:2007 Part 26: Vocabulary
- ISO 7185:1990 Information technology – Programming languages – Pascal
- ISO 7194:2008 Measurement of fluid flow in closed conduits – Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- ISO 7196:1995 Acoustics – Frequency-weighting characteristic for infrasound measurements
- ISO 7197:2006 Neurosurgical implants – Sterile, single-use hydrocephalus shunts and components
- ISO 7198:2016 Cardiovascular implants and extracorporeal systems – Vascular prostheses – Tubular vascular grafts and vascular patches
- ISO 7199:2016 Cardiovascular implants and artificial organs – Blood-gas exchangers (oxygenators)
- ISO 7200:2004 Technical product documentation – Data fields in title blocks and document headers
- ISO 7206 Implants for surgery – Partial and total hip joint prostheses
- ISO 7206-1:2008 Part 1: Classification and designation of dimensions
- ISO 7206-2:2011 Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
- ISO 7206-4:2010 Part 4: Determination of endurance properties and performance of stemmed femoral components
- ISO 7206-6:2013 Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
- ISO 7206-10:2003 Part 10: Determination of resistance to static load of modular femoral heads
- ISO 7206-12:2016 Part 12: Deformation test method for acetabular shells
- ISO 7206-13:2016 Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
- ISO 7207 Implants for surgery – Components for partial and total knee joint prostheses
- ISO 7207-1:2007 Part 1: Classification, definitions and designation of dimensions
- ISO 7207-2:2011 Part 2: Articulating surfaces made of metal, ceramic and plastics materials
- ISO 7216:2015 Agricultural and forestry tractors – Measurement of noise emitted when in motion
- ISO 7218:2007 Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations
- ISO 7220:1996 Information and documentation – Presentation of catalogues of standards
- ISO 7237:1993 Caravans – Masses and dimensions – Vocabulary
- ISO 7240 Fire detection and alarm systems
- ISO 7251:2005 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of presumptive Escherichia coli – Most probable number technique
- ISO 7255:1985 Shipbuilding – Active control units of ships – Vocabulary
- ISO 7275:1985 Documentation – Presentation of title information of series
- ISO 7287:2002 Graphical symbols for thermal cutting equipment
- ISO 7294:1983 Saw teeth for woodworking saws – Profile shape – Terminology and designation
- ISO 7296 Cranes – Graphic symbols
- ISO 7296-1:1991 Part 1: General
- ISO 7296-2:1996 Part 2: Mobile cranes
- ISO 7296-3:2006 Part 3: Tower cranes
- ISO 7297:1985 Information processing – Magnetic disk for data storage devices – 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter
- ISO 7298:1985 Information processing – Magnetic disk for data storage devices – 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter
- ISO 7345:1987 Thermal insulation – Physical quantities and definitions
- ISO 7347:1987 Ferroalloys – Experimental methods for checking the bias of sampling and sample preparation
- ISO 7348:1992 Glass containers – Manufacture – Vocabulary
- ISO/IEC 7350:1991 Information technology – Registration of repertoires of graphic characters from ISO/IEC 10367
- ISO 7369:2004 Pipework – Metal hoses and hose assemblies – Vocabulary
- ISO 7372:2005 Trade data interchange – Trade data elements directory
- ISO 7373:1987 Ferroalloys – Experimental methods for checking the precision of sample division
- ISO 7376:2009 Anaesthetic and respiratory equipment – Laryngoscopes for tracheal intubation
- ISO 7380 Button Head Screws
- ISO 7380-1:2011 Part 1: Hexagon socket button head screws
- ISO 7380-2:2011 Part 2: Hexagon socket button head screws with collar
- ISO 7396 Medical gas pipeline systems
- ISO 7396-1:2016 Part 1: Pipeline systems for compressed medical gases and vacuum
- ISO 7396-2:2007 Part 2: Anaesthetic gas scavenging disposal systems
- ISO 7404 Methods for the petrographic analysis of coals
- ISO 7404-1:2016 Part 1: Vocabulary
- ISO 7437:1990 Technical drawings – Construction drawings – General rules for execution of production drawings for prefabricated structural components
- ISO 7462:1985 Shipbuilding – Principal ship dimensions – Terminology and definitions for computer applications
- ISO 7478:1987 Information processing systems – Data communication – Multilink procedures
- ISO 7479:1982 Textile machinery and accessories — Metal reeds with plastic baulk [Withdrawn: replaced with ISO 366-4]
- ISO/IEC 7480:1991 Information technology – Telecommunications and information exchange between systems – Start-stop transmission signal quality at DTE/DCE interfaces
- ISO 7482 Raw goat skins
- ISO 7482-1:1998 Part 1: Descriptions of defects
- ISO/IEC 7487 Information technology – Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides – ISO type 202
- ISO/IEC 7487-1:1993 Part 1: Dimensional, physical and magnetic characteristics
- ISO 7487-2:1985 Part 2: Track format A
- ISO 7487-3:1986 Part 3: Track format B
- ISO 7489:1986 Dental glass polyalkenoate cements [Withdrawn: replaced with ISO 9917]
- ISO/IEC 7498 Information technology — Open Systems Interconnection — Basic Reference Model[Note 3]
- ISO/IEC 7498-1:1994 The Basic Model
- ISO 7498-2:1989 Part 2: Security Architecture
- ISO/IEC 7498-3:1997 Naming and addressing
- ISO/IEC 7498-4:1989 Part 4: Management framework
- ISO/IEC 7501 Identification cards – Machine readable travel documents
- ISO/IEC 7501-1:2008 Part 1: Machine readable passport
- ISO/IEC 7501-2:1997 Part 2: Machine readable visa
- ISO/IEC 7501-3:2005 Part 3: Machine readable official travel documents
- ISO 7504:2015 Gas analysis – Vocabulary
- ISO 7518:1983 Technical drawings – Construction drawings – Simplified representation of demolition and rebuilding
- ISO 7519:1991 Technical drawings – Construction drawings – General principles of presentation for general arrangement and assembly drawings
- ISO 7520:1985 Ferronickel – Determination of cobalt content – Flame atomic absorption spectrometric method
- ISO 7524:1985 Nickel, ferronickel and nickel alloys – Determination of carbon content – Infra-red absorption method after induction furnace combustion
- ISO 7526:1985 Nickel, ferronickel and nickel alloys – Determination of sulfur content – Infra-red absorption method after induction furnace combustion
- ISO 7527:1985 Nickel, ferronickel and nickel alloys – Determination of sulfur content – Iodimetric titration method after induction furnace combustion
- ISO 7550:1985 Laboratory glassware – Disposable micropipettes
- ISO 7563:1998 Fresh fruits and vegetables – Vocabulary
- ISO 7568:1986 Woodworking machines – Thickness planing machines with rotary cutterblock for one-side dressing – Nomenclature and acceptance conditions
- ISO 7569:1986 Woodworking machines – Planing machines for two-, three- or four-side dressing – Nomenclature and acceptance conditions
- ISO 7570:1986 Woodworking machines – Surface planing and thicknessing machines – Nomenclature and acceptance conditions
- ISO 7571:1986 Woodworking machines – Surface planing machines with cutterblock for one-side dressing – Nomenclature and acceptance conditions
- ISO 7573:2008 Technical product documentation – Parts lists
- ISO 7574 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment
- ISO 7574-1:1985 Part 1: General considerations and definitions
- ISO 7574-2:1985 Part 2: Methods for stated values for individual machines
- ISO 7574-3:1985 Part 3: Simple (transition) method for stated values for batches of machines
- ISO 7574-4:1985 Part 4: Methods for stated values for batches of machines
- ISO 7583:2013 Anodizing of aluminium and its alloys – Terms and definitions
- ISO 7626 Mechanical vibration and shock – Experimental determination of mechanical mobility[Note 3]
- ISO 7626-1:2011 Part 1: Basic terms and definitions, and transducer specifications
- ISO 7626-2:2015 Part 2: Measurements using single-point translation excitation with an attached vibration exciter
- ISO 7626-5:1994 Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
- ISO 7637 Road vehicles – Electrical disturbances from conduction and coupling
- ISO 7637-1:2015 Part 1: Definitions and general considerations
- ISO 7639:1985 Road vehicles – Diagnostic systems – Graphical symbols
- ISO 7665:1983 Information processing – File structure and labelling of flexible disk cartridges for information interchange
- ISO 7692:1983 Ferrotitanium – Determination of titanium content – Titrimetric method
- ISO 7693:1984 Ferrotungsten – Determination of tungsten content – Cinchonine gravimetric method
- ISO 7704:1985 Water quality – Evaluation of membrane filters used for microbiological analyses
- ISO 7711 Dentistry – Diamond rotary instruments
- ISO 7711-3:2004 Part 3: Grit sizes, designation and colour code
- ISO 7712:1983 Laboratory glassware – Disposable Pasteur pipettes
- ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
- ISO 7740:1985 Instruments for surgery – Scalpels with detachable blades – Fitting dimensions
- ISO 7741:1986 Instruments for surgery – Scissors and shears – General requirements and test methods
- ISO/IEC 7776:1995 Information technology – Telecommunications and information exchange between systems – High-level data link control procedures – Description of the X.25 LAPB-compatible DTE data link procedures
- ISO 7779:2010 Acoustics – Measurement of airborne noise emitted by information technology and telecommunications equipment
- ISO/IEC 7810 Identification cards – Physical characteristics
- ISO/IEC 7811 Identification cards – Recording technique
- ISO/IEC 7812 Identification cards – Identification of issuers
- ISO/IEC 7813:2006 Information technology – Identification cards – Financial transaction cards
- ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]
- ISO 7830:1983 Photography — Safety photographic films other than motion picture films — Material specifications Withdrawn: replaced with ISO 543, later ISO 18906
- ISO 7839:2005 Textile machinery and accessories – Knitting machines – Vocabulary and classification
- ISO/TS 7849 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement
- ISO/TS 7849-1:2009 Part 1: Survey method using a fixed radiation factor
- ISO/TS 7849-2:2009 Part 2: Engineering method including determination of the adequate radiation factor
- ISO 7863:1984 Height setting micrometers and riser blocks
- ISO 7864:2016 Sterile hypodermic needles for single use – Requirements and test methods
- ISO 7870 Control charts
- ISO 7870-1:2014 Part 1: General guidelines
- ISO 7870-2:2013 Part 2: Shewhart control charts
- ISO 7870-3:2012 Part 3: Acceptance control charts
- ISO 7870-4:2011 Part 4: Cumulative sum charts
- ISO 7870-5:2014 Part 5: Specialized control charts
- ISO 7870-6:2016 Part 6: EWMA control charts
- ISO 7870-8:2017 Part 8: Charting techniques for short runs and small mixed batches
- ISO 7876 Fuel injection equipment – Vocabulary
- ISO 7876-1:1990 Part 1: Fuel injection pumps
- ISO 7876-2:1991 Part 2: Fuel injectors
- ISO 7876-3:1993 Part 3: Unit injectors
- ISO 7876-4:2004 Part 4: High-pressure pipes and end-connections
- ISO 7876-5:2004 Part 5: Common rail fuel injection system
- ISO 7885:2010 Dentistry – Sterile injection needles for single use
- ISO 7886 Sterile hypodermic syringes for single use
- ISO 7886-1:2017 Part 1: Syringes for manual use
- ISO 7886-2:1996 Part 2: Syringes for use with power-driven syringe pumps
- ISO 7886-3:2005 Part 3: Auto-disable syringes for fixed-dose immunization
- ISO 7886-4:2006 Part 4: Syringes with re-use prevention feature
- ISO 7889:2003 Yogurt – Enumeration of characteristic microorganisms – Colony-count technique at 37 degrees C
- ISO 7899 Water quality – Detection and enumeration of intestinal enterococci
- ISO 7899-1:1998 Part 1: Miniaturized method (Most Probable Number) for surface and waste water
- ISO 7899-2:2000 Part 2: Membrane filtration method
- ISO 7919 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts
- ISO 7919-3:2009 Part 3: Coupled industrial machines
- ISO 7919-4:2009 Part 4: Gas turbine sets with fluid-film bearings
- ISO 7919-5:2005 Part 5: Machine sets in hydraulic power generating and pumping plants
- ISO 7929:1985 Information processing – Magnetic disk for data storage devices – 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter
- ISO 7932:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of presumptive Bacillus cereus – Colony-count technique at 30 degrees C
- ISO 7937:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of Clostridium perfringens – Colony-count technique
- ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
- ISO 7944:1998 Optics and optical instruments – Reference wavelengths
- ISO 7945:1985 Woodworking machines – Single spindle boring machines – Nomenclature and acceptance conditions
- ISO 7946:1985 Woodworking machines – Slot mortising machines – Nomenclature and acceptance conditions
- ISO 7947:1985 Woodworking machines – Two-, three- and four-side moulding machines – Nomenclature and acceptance conditions
- ISO 7948:1987 Woodworking machines – Routing machines – Nomenclature and acceptance conditions
- ISO 7949:1985 Woodworking machines – Veneer pack edge shears – Nomenclature and acceptance conditions
- ISO 7950:1985 Woodworking machines – Single chain mortising machines – Nomenclature and acceptance conditions
- ISO 7957:1987 Woodworking machines – Radial circular saws – Nomenclature and acceptance conditions
- ISO 7958:1987 Woodworking machines – Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels – Nomenclature and acceptance conditions
- ISO 7959:1987 Woodworking machines – Double edging precision circular sawing machines – Nomenclature and acceptance conditions
- ISO 7960:1995 Airborne noise emitted by machine tools – Operating conditions for woodworking machines
- ISO 7967 Reciprocating internal combustion engines – Vocabulary of components and systems
- ISO 7967-1:2005 Part 1: Structure and external covers
- ISO 7967-2:2010 Part 2: Main running gear
- ISO 7967-3:2010 Part 3: Valves, camshaft drives and actuating mechanisms
- ISO 7967-4:2005 Part 4: Pressure charging and air/exhaust gas ducting systems
- ISO 7967-5:2010 Part 5: Cooling systems
- ISO 7967-6:2005 Part 6: Lubricating systems
- ISO 7967-7:2005 Part 7: Governing systems
- ISO 7967-8:2005 Part 8: Starting systems
- ISO 7967-9:2010 Part 9: Control and monitoring systems
- ISO 7967-10:2014 Part 10: Ignition systems
- ISO 7967-11:2014 Part 11: Fuel systems
- ISO 7967-12:2014 Part 12: Exhaust emission control systems
- ISO 7983:1988 Woodworking machines – Single blade circular sawing machines with travelling table – Nomenclature and acceptance conditions
- ISO 7987:1985 Woodworking machines – Turning lathes – Nomenclature and acceptance conditions
- ISO 7988:1988 Woodworking machines – Double-end tenoning machines – Nomenclature and acceptance conditions
- ISO 7998:2005 Ophthalmic optics – Spectacle frames – Lists of equivalent terms and vocabulary
- ISO 8000 Data quality
- ISO 8002:1986 Mechanical vibrations – Land vehicles – Method for reporting measured data
- ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
- ISO 8041:2005 Human response to vibration – Measuring instrumentation
- ISO 8041-1:2017 Part 1: General purpose vibration meters
- ISO 8042:1988 Shock and vibration measurements – Characteristics to be specified for seismic pick-ups
- ISO 8044:2015 Corrosion of metals and alloys – Basic terms and definitions
- ISO 8048:1984 Technical drawings – Construction drawings – Representation of views, sections and cuts
- ISO 8049:2016 Ferronickel shot – Sampling for analysis
- ISO 8050:1988 Ferronickel ingots or pieces – Sampling for analysis
- ISO 8062 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts
- ISO 8062-1:2007 Part 1: Vocabulary
- ISO/TS 8062-2:2013 Part 2: Rules
- ISO 8062-3:2007 Part 3: General dimensional and geometrical tolerances and machining allowances for castings
- ISO 8062-4:2017 Part 4: General tolerances for castings using profile tolerancing in a general datum system
- ISO 8063 Information processing – Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi)
- ISO 8063-1:1986 Part 1: Mechanical, physical and magnetic properties
- ISO 8063-2:1986 Part 2: Track format and method of recording for data interchange in start/stop mode
- ISO 8064:1985 Information processing – Reels for 12,7 mm (0,5 in) wide magnetic tapes – Sizes 16, 18 and 22
- ISO/IEC 8072:1996 Information technology – Open systems interconnection – Transport service definition
- ISO/IEC 8073:1997 Information technology – Open Systems Interconnection – Protocol for providing the connection-mode transport service
- ISO 8088:1994 Equipment for olive cultivation and olive oil production – Vocabulary
- ISO 8090:1990 Cycles – Terminology
- ISO 8107:1993 Nuclear power plants – Maintainability – Terminology
- ISO 8109:1990 Banking and related financial services – Securities – Format of Eurobonds
- ISO 8114:1990 Textile machinery and accessories – Spindles for ring-spinning and doubling machines – List of equivalent terms
- ISO 8116 Textile machinery and accessories – Beams for winding
- ISO 8116-1:1995 Part 1: General vocabulary
- ISO 8119 Textile machinery and accessories – Needles for knitting machines – Terminology
- ISO 8119-1:1989 Part 1: Latch-type needles
- ISO 8119-2:1989 Part 2: Bearded needles
- ISO 8119-3:1992 Part 3: Compound needles
- ISO/IEC 81346: Industrial systems, installations and equipment and industrial products – structuring principles and reference designations
- ISO 8147:1995 Shipbuilding and marine structures – Derrick rigs and component parts – Vocabulary
- ISO 8152:1984 Earth-moving machinery – Operation and maintenance – Training of mechanics
- ISO 8153 Aerospace fluid systems and components – Vocabulary
- ISO 8153-1:2009 Part 1: Hose assemblies
- ISO 8157:2015 Fertilizers and soil conditioners – Vocabulary
- ISO 8159:1987 Textiles – Morphology of fibres and yarns – Vocabulary
- ISO 8160:1987 Textiles – Textured filament yarns – Vocabulary
- ISO 8178 Reciprocating internal combustion engines – Exhaust emission measurement
- ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
- ISO 8199:2005 Water quality – General guidance on the enumeration of micro-organisms by culture
- ISO/IEC 8208:2000 Information technology – Data communications – X.25 Packet Layer Protocol for Data Terminal Equipment
- ISO/IEC 8211:1994 Information technology – Specification for a data descriptive file for information interchange
- ISO 8217:2017 Petroleum products – Fuels (class F) – Specifications of marine fuels
- ISO 8229:1991 Operations and baths relating to dry-cleaning machines – Vocabulary
- ISO 8277:2013 Ships and marine technology – Pipework and machinery – Information transfer
- ISO 8297:1994 Acoustics – Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment – Engineering method
- ISO 8316:1987 Measurement of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank
- ISO 8317:2015 Child-resistant packaging – Requirements and testing procedures for reclosable packages
- ISO 8319 Orthopaedic instruments – Drive connections
- ISO 8319-1:1996 Part 1: Keys for use with screws with hexagon socket heads
- ISO 8319-2:1986 Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
- ISO/IEC 8326:1996 Information technology – Open Systems Interconnection – Session service definition
- ISO/IEC 8327 Information technology – Open Systems Interconnection – Connection-oriented Session protocol
- ISO/IEC 8327-1:1996 Protocol specification
- ISO/IEC 8327-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
- ISO 8330:2014 Rubber and plastics hoses and hose assemblies – Vocabulary
- ISO 8333:1985 Liquid flow measurement in open channels by weirs and flumes – V-shaped broad-crested weirs
- ISO 8343:1985 Ferronickel – Determination of silicon content – Gravimetric method
- ISO/IEC 8348:2002 Information technology – Open Systems Interconnection – Network service definition
- ISO 8362 Injection containers and accessories
- ISO 8362-1:2009 Part 1: Injection vials made of glass tubing
- ISO 8362-2:2015 Part 2: Closures for injection vials
- ISO 8362-3:2001 Part 3: Aluminium caps for injection vials
- ISO 8362-4:2011 Part 4: Injection vials made of moulded glass
- ISO 8362-5:2016 Part 5: Freeze drying closures for injection vials
- ISO 8362-6:2010 Part 6: Caps made of aluminium-plastics combinations for injection vials
- ISO 8362-7:2006 Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
- ISO/TR 8363:1997 Measurement of liquid flow in open channels — General guidelines for selection of method [Withdrawn: replaced by ISO 18365]
- ISO 8368:1999 Hydrometric determinations – Flow measurements in open channels using structures – Guidelines for selection of structure
- ISO 8373:2012 Manipulating industrial robots – Vocabulary
- ISO 8378 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides
- ISO 8378-1:1986 Part 1: Dimensional, physical and magnetic characteristics
- ISO 8378-2:1986 Part 2: Track format A
- ISO 8378-3:1986 Part 3: Track format B
- ISO 8384:2000 Ships and marine technology – Dredgers – Vocabulary
- ISO 8388:1998 Knitted fabrics – Types – Vocabulary
- ISO 8421 Fire protection – Vocabulary
- ISO 8421-1:1987 Part 1: General terms and phenomena of fire
- ISO 8421-2:1987 Part 2: Structural fire protection
- ISO 8421-6:1987 Part 6: Evacuation and means of escape
- ISO 8421-7:1987 Part 7: Explosion detection and suppression means
- ISO 8422:2006 Sequential sampling plans for inspection by attributes
- ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
- ISO 8429:1986 Optics and optical instruments – Ophthalmology – Graduated dial scale
- ISO 8439:1990 Forms design – Basic layout
- ISO 8440:1986 Location of codes in trade documents
- ISO/IEC 8441 Information technology – High density digital recording (HDDR)
- ISO/IEC 8441-1:1991 Part 1: Unrecorded magnetic tape for (HDDR) applications
- ISO/IEC 8441-2:1991 Part 2: Guide for interchange practice
- ISO 8459:2009 Information and documentation – Bibliographic data element directory for use in data exchange and enquiry
- ISO 8462 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi)
- ISO 8462-1:1986 Part 1: Mechanical, physical and magnetic properties
- ISO 8462-2:1986 Part 2: Streaming mode
- ISO/IEC 8473 Information technology – Protocol for providing the connectionless-mode network service
- ISO/IEC 8473-1:1998 Protocol specification
- ISO/IEC 8473-2:1996 Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork
- ISO/IEC 8473-3:1995 Provision of the underlying service by an X.25 subnetwork
- ISO/IEC 8473-4:1995 Provision of the underlying service by a subnetwork that provides the OSI data link service
- ISO/IEC 8473-5:1997 Provision of the underlying service by ISDN circuit-switched B-channels
- ISO/IEC 8480:1995 Information technology – Telecommunications and information exchange between systems – DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
- ISO/IEC 8481:1996 Information technology – Telecommunications and information exchange between systems – DTE to DTE direct connections
- ISO/IEC 8482:1993 Information technology – Telecommunications and information exchange between systems – Twisted pair multipoint interconnections
- ISO/IEC 8484:2014 Information technology – Magnetic stripes on savingsbooks
- ISO 8485:1989 Programming languages – APL
- ISO 8498:1990 Woven fabrics – Description of defects – Vocabulary
- ISO 8499:2003 Knitted fabrics – Description of defects – Vocabulary
- ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
- ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
- ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
- ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
- ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
- ISO 8502 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness
- ISO 8502-2:2017 Part 2: Laboratory determination of chloride on cleaned surfaces
- ISO 8502-3:2017 Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
- ISO 8502-4:2017 Part 4: Guidance on the estimation of the probability of condensation prior to paint application
- ISO 8502-5:1998 Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method
- ISO 8502-6:2006 Part 6: Extraction of soluble contaminants for analysis – The Bresle method
- ISO 8502-9:1998 Part 9: Field method for the conductometric determination of water-soluble salts
- ISO 8502-11:2006 Part 11: Field method for the turbidimetric determination of water-soluble sulfate
- ISO 8503 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates
- ISO 8503-1:2012 Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
- ISO 8503-2:2012 Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel – Comparator procedure
- ISO 8503-3:2012 Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile – Focusing microscope procedure
- ISO 8503-4:2012 Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile – Stylus instrument procedure
- ISO 8503-5:2017 Part 5: Replica tape method for the determination of the surface profile
- ISO 8504 Preparation of steel substrates before application of paints and related products – Surface preparation methods
- ISO 8504-1:2000 Part 1: General principles
- ISO 8504-2:2000 Part 2: Abrasive blast-cleaning
- ISO 8504-3:1993 Part 3: Hand- and power-tool cleaning
- ISO 8512 Surface plates
- ISO 8512-1:1990 Part 1: Cast iron
- ISO 8512-2:1990 Part 2: Granite
- ISO/TR 8517:1988 Rubber- or plastics-covered rollers – Glossary
- ISO 8525:2008 Airborne noise emitted by machine tools – Operating conditions for metal-cutting machines
- ISO 8528 Reciprocating internal combustion engine driven alternating current generating sets
- ISO 8528-1:2005 Part 1: Application, ratings and performance
- ISO 8528-2:2005 Part 2: Engines
- ISO 8528-3:2005 Part 3: Alternating current generators for generating sets
- ISO 8528-4:2005 Part 4: Controlgear and switchgear
- ISO 8528-5:2013 Part 5: Generating sets
- ISO 8528-6:2005 Part 6: Test methods
- ISO 8528-7:2017 Part 7: Technical declarations for specification and design
- ISO 8528-8:2016 Part 8: Requirements and tests for low-power generating sets
- ISO 8528-9:2017 Part 9: Measurement and evaluation of mechanical vibrations
- ISO 8528-10:1998 Part 10: Measurement of airborne noise by the enveloping surface method
- ISO 8528-12:1997 Part 12: Emergency power supply to safety services
- ISO 8528-13:2016 Part 13: Safety
- ISO 8529 Reference neutron radiations
- ISO 8529-1:2001 Part 1: Characteristics and methods of production
- ISO 8529-2:2000 Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
- ISO 8529-3:1998 Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
- ISO 8532:1995 Securities – Format for transmission of certificate numbers
- ISO 8536 Infusion equipment for medical use
- ISO 8536-1:2011 Part 1: Infusion glass bottles
- ISO 8536-2:2010 Part 2: Closures for infusion bottles
- ISO 8536-3:2009 Part 3: Aluminium caps for infusion bottles
- ISO 8536-4:2010 Part 4: Infusion sets for single use, gravity feed
- ISO 8536-5:2004 Part 5: Burette infusion sets for single use, gravity feed
- ISO 8536-6:2016 Part 6: Freeze drying closures for infusion bottles
- ISO 8536-7:2009 Part 7: Caps made of aluminium-plastics combinations for infusion bottles
- ISO 8536-8:2015 Part 8: Infusion sets for single use with pressure infusion apparatus
- ISO 8536-9:2015 Part 9: Fluid lines for single use with pressure infusion equipment
- ISO 8536-10:2015 Part 10: Accessories for fluid lines for single use with pressure infusion equipment
- ISO 8536-11:2015 Part 11: Infusion filters for single use with pressure infusion equipment
- ISO 8536-12:2007 Part 12: Check valves
- ISO 8536-13:2016 Part 13: Graduated flow regulators for single use with fluid contact
- ISO 8536-14:2016 Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
- ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
- ISO 8540:1993 Open front mechanical power presses – Vocabulary
- ISO 8548 Prosthetics and orthotics – Limb deficiencies
- ISO 8548-1:1989 Part 1: Method of describing limb deficiencies present at birth
- ISO 8548-2:1993 Part 2: Method of describing lower limb amputation stumps
- ISO 8548-3:1993 Part 3: Method of describing upper limb amputation stumps
- ISO 8548-4:1998 Part 4: Description of causal conditions leading to amputation
- ISO 8548-5:2003 Part 5: Description of the clinical condition of the person who has had an amputation
- ISO 8549 Prosthetics and orthotics – Vocabulary
- ISO 8549-1:1989 Part 1: General terms for external limb prostheses and external orthoses
- ISO 8549-2:1989 Part 2: Terms relating to external limb prostheses and wearers of these prostheses
- ISO 8549-3:1989 Part 3: Terms relating to external orthoses
- ISO 8549-4:2014 Part 4: Terms relating to limb amputation
- ISO/TR 8550 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots
- ISO/TR 8550-1:2007 Part 1: Acceptance sampling
- ISO/TR 8550-2:2007 Part 2: Sampling by attributes
- ISO/TR 8550-3:2007 Part 3: Sampling by variables
- ISO 8551:2003 Prosthetics and orthotics – Functional deficiencies – Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
- ISO 8552:2004 Milk – Estimation of psychrotrophic microorganisms – Colony-count technique at 21 degrees C (Rapid method)
- ISO 8553:2004 Milk – Enumeration of microorganisms – Plate-loop technique at 30 degrees C
- ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions [Withdrawn: replaced by ISO 8559-1:2017]
- ISO 8559 Size designation of clothes
- ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
- ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
- ISO 8560:1986 Technical drawings – Construction drawings – Representation of modular sizes, lines and grids
- ISO 8568:2007 Mechanical shock – Testing machines – Characteristics and performance
- ISO 8571 Information processing systems – Open Systems Interconnection – File Transfer, Access and Management
- ISO 8571-1:1988 Part 1: General introduction
- ISO 8571-2:1988 Part 2: Virtual Filestore Definition
- ISO 8571-3:1988 Part 3: File Service Definition
- ISO 8571-4:1988 Part 4: File Protocol Specification
- ISO/IEC 8571-5:1990 Part 5: Protocol Implementation Conformance Statement Proforma
- ISO 8573 Compressed air
- ISO 8573-1:2010 Contaminants and purity classes
- ISO 8573-2:2007 Test methods for oil aerosol content
- ISO 8573-3:1999 Test methods for measurement of humidity
- ISO 8573-4:2001 Test methods for solid particle content
- ISO 8573-5:2001 Test methods for oil vapour and organic solvent content
- ISO 8573-6:2003 Test methods for gaseous contaminant content
- ISO 8573-7:2003 Test method for viable microbiological contaminant content
- ISO 8573-8:2004 Test methods for solid particle content by mass concentration
- ISO 8573-9:2004 Test methods for liquid water content
- ISO 8579 Acceptance code for gear units
- ISO 8579-1:2002 Part 1: Test code for airborne sound
- ISO 8583 Financial transaction card originated messages – Interchange message specifications
- ISO 8586:2012 Sensory analysis – General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
- ISO 8596:2009 Ophthalmic optics – Visual acuity testing – Standard optotype and its presentation
- ISO 8598 Optics and optical instruments – Focimeters
- ISO 8598-1:2014 Part 1: General purpose instruments
- ISO 8600 Endoscopes – Medical endoscopes and endotherapy devices[Note 3]
- ISO 8600-1:2015 Part 1: General requirements
- ISO 8600-2:2015 Part 2: Particular requirements for rigid bronchoscopes
- ISO 8600-3:1997 Part 3: Determination of field of view and direction of view of endoscopes with optics
- ISO 8600-4:2014 Part 4: Determination of maximum width of insertion portion
- ISO 8600-5:2005 Part 5: Determination of optical resolution of rigid endoscopes with optics
- ISO 8600-6:2005 Part 6: Vocabulary
- ISO 8600-7:2012 Part 7: Basic requirements for medical endoscopes of water-resistant type
- ISO 8601:2019 Data elements and interchange formats – Information interchange – Representation of dates and times
- ISO/IEC 8602:1995 Information technology – Protocol for providing the OSI connectionless-mode transport service
- ISO 8604:1988 Plastics – Prepregs – Definitions of terms and symbols for designations
- ISO 8608:2016 Mechanical vibration – Road surface profiles – Reporting of measured data
- ISO 8612:2009 Ophthalmic instruments – Tonometers
- ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
- ISO 8614:1997 Ski bindings – Vocabulary
- ISO 8615:1991 Implants for surgery – Fixation devices for use in the ends of the femur in adults
- ISO 8624:2011 Ophthalmic optics – Spectacle frames – Measuring system and terminology
- ISO 8625 Aerospace – Fluid systems – Vocabulary
- ISO 8625-1:1993 Part 1: General terms and definitions related to pressure
- ISO 8625-2:1991 Part 2: General terms and definitions relating to flow
- ISO 8625-3:1991 Part 3: General terms and definitions relating to temperature
- ISO 8625-4:2011 Part 4: General terms and definitions relating to control/actuation systems
- ISO 8626:1989 Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
- ISO 8630 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side
- ISO 8630-1:1987 Part 1: Dimensional, physical and magnetic characteristics
- ISO 8630-2:1987 Part 2: Track format A for 77 tracks
- ISO 8630-3:1987 Part 3: Track format B for 80 tracks
- ISO/IEC 8631:1989 Information technology – Program constructs and conventions for their representation
- ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
- ISO/IEC 8632-1:1999 Part 1: Functional specification
- ISO/IEC 8632-2:1992 Part 2: Character encoding [withdrawn 2001-06-21]
- ISO/IEC 8632-3:1999 Part 3: Binary encoding
- ISO/IEC 8632-4:1999 Part 4: Clear text encoding
- ISO 8637:2010 Cardiovascular implants and extracorporeal systems – Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
- ISO 8638:2010 Cardiovascular implants and extracorporeal systems – Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
- ISO 8640 Textile machinery and accessories – Flat warp knitting machines[Note 3]
- ISO 8640-1:2004 Part 1: Vocabulary of basic structure and knitting elements
- ISO 8640-2:2004 Part 2: Vocabulary of warp let-off, fabric take-up and batching
- ISO 8640-3:2002 Part 3: Vocabulary of patterning devices
- ISO 8640-4:1996 Part 4: Stitch bonding machines and stitch bonding devices
- ISO 8648:1988 Information processing systems – Open Systems Interconnection – Internal organization of the Network Layer
- ISO/IEC 8650 Information technology – Open Systems Interconnection – Protocol specification for the Association Control Service Element
- ISO/IEC 8650-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
- ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
- ISO 8651-1:1988 Part 1: FORTRAN
- ISO 8651-2:1988 Part 2: Pascal
- ISO 8651-3:1988 Part 3: Ada
- ISO/IEC 8651-4:1995 Part 4: C
- ISO/IEC 8652:2012 Information technology – Programming languages – Ada
- ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
- ISO 8655 Piston-operated volumetric apparatus
- ISO 8655-1:2002 Part 1: Terminology, general requirements and user recommendations
- ISO 8655-2:2002 Part 2: Piston pipettes
- ISO 8655-3:2002 Part 3: Piston burettes
- ISO 8655-4:2002 Part 4: Dilutors
- ISO 8655-5:2002 Part 5: Dispensers
- ISO 8655-6:2002 Part 6: Gravimetric methods for the determination of measurement error
- ISO 8655-7:2005 Part 7: Non-gravimetric methods for the assessment of equipment performance
- ISO 8669 Urine collection bags
- ISO 8669-1:1988 Part 1: Vocabulary
- ISO 8670 Ostomy collection bags
- ISO 8670-1:1988 Part 1: Vocabulary
- ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
- ISO 8695:2010 Tools for pressing – Punches – Nomenclature and terminology
- ISO/TR 8713:2012 Electrically propelled road vehicles – Vocabulary
- ISO 8769:2016 Reference sources – Calibration of surface contamination monitors – Alpha-, beta- and photon emitters
- ISO 8777:1993 Information and documentation – Commands for interactive text searching
- ISO 8784 Pulp, paper and board – Microbiological examination
- ISO 8784-1:2014 Part 1: Enumeration of bacteria and bacterial spores based on disintegration
- ISO 8785:1998 Geometrical Product Specification (GPS) – Surface imperfections – Terms, definitions and parameters
- ISO 8790:1987 Information processing systems – Computer system configuration diagram symbols and conventions
- ISO/IEC 8802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements
- ISO/IEC/IEEE 8802-A:2015 Part A: Overview and architecture
- ISO/IEC TR 8802-1:2001 Part 1: Overview of Local Area Network Standards
- ISO/IEC/IEEE 8802-1Q:2016 Part 1Q: Bridges and bridged networks
- ISO/IEC/IEEE 8802-1X:2013 Part 1X: Port-based network access control
- ISO/IEC/IEEE 8802-1AB:2017 Part 1AB: Station and media access control connectivity discovery
- ISO/IEC/IEEE 8802-1AE:2013 Part 1AE: Media access control (MAC) security
- ISO/IEC/IEEE 8802-1AR:2014 Part 1AR: Secure device identity
- ISO/IEC/IEEE 8802-1AS:2014 Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks
- ISO/IEC/IEEE 8802-1AX:2016 Part 1AX: Link aggregation
- ISO/IEC/IEEE 8802-1BA:2016 Part 1BA: Audio video bridging (AVB) systems
- ISO/IEC/IEEE 8802-1BR:2016 Part 1BR: Virtual bridged local area networks – Bridge port extension
- ISO/IEC 8802-2:1998 Part 2: Logical link control
- ISO/IEC/IEEE 8802-3:2017 Part 3: Standard for Ethernet
- ISO/IEC/IEEE 8802-3-1:2015 Part 3-1: Standard for management information base (MIB) – Definitions for Ethernet
- ISO/IEC 8802-5:1998 Part 5: Token Ring access method and physical layer specifications
- ISO/IEC/IEEE 8802-11:2012 Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
- ISO/IEC/IEEE 8802-15-4:2010 Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
- ISO/IEC/IEEE 8802-22:2015 Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
- ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
- ISO/IEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
- ISO/IEC 8806-4 Part 4: C
- ISO 8807:1989 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
- ISO 8811:2000 Earth-moving machinery – Rollers and compactors – Terminology and commercial specifications
- ISO 8812:2016 Earth-moving machinery – Backhoe loaders – Terminology and commercial specifications
- ISO 8815:1994 Aircraft – Electrical cables and cable harnesses – Vocabulary
- ISO/IEC 8822:1994 Information technology – Open Systems Interconnection – Presentation service definition
- ISO/IEC 8823 Information technology – Open Systems Interconnection – Connection-oriented presentation protocol
- ISO/IEC 8823-1:1994 Protocol specification
- ISO/IEC 8823-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
- ISO/IEC 8824-1:2015 Specification of basic notation
- ISO/IEC 8824-2:2015 Information object specification
- ISO/IEC 8824-3:2015 Constraint specification
- ISO/IEC 8824-4:2015 Parameterization of ASN.1 specifications
- ISO/IEC 8825 Information technology – ASN.1 encoding rules
- ISO/IEC 8825-1:2015 Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)
- ISO/IEC 8825-2:2015 Specification of Packed Encoding Rules (PER)
- ISO/IEC 8825-3:2015 Specification of Encoding Control Notation (ECN)
- ISO/IEC 8825-4:2015 XML Encoding Rules (XER)
- ISO/IEC 8825-5:2015 Mapping W3C XML schema definitions into ASN.1
- ISO/IEC 8825-6:2015 Registration and application of PER encoding instructions
- ISO/IEC 8825-7:2015 Part 7: Specification of Octet Encoding Rules (OER)
- ISO 8826 Technical drawings – Rolling bearings
- ISO 8826-1:1989 Part 1: General simplified representation
- ISO 8826-2:1994 Part 2: Detailed simplified representation
- ISO 8827:1988 Implants for surgery – Staples with parallel legs for orthopaedic use – General requirements
- ISO 8828:2014 Implants for surgery – Guidance on care and handling of orthopaedic implants
- ISO 8835 Inhalational anaesthesia systems
- ISO 8835-7:2011 Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
- ISO 8836:2014 Suction catheters for use in the respiratory tract
- ISO 8843:2005 Aircraft – Crimp-removable contacts for electrical connectors – Identification system
- ISO 8855:2011 Road vehicles – Vehicle dynamics and road-holding ability – Vocabulary
- ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
- ISO/IEC 8859-1:1998 Part 1: Latin alphabet No. 1
- ISO/IEC 8859-2:1999 Part 2: Latin alphabet No. 2
- ISO/IEC 8859-3:1999 Part 3: Latin alphabet No. 3
- ISO/IEC 8859-4:1998 Part 4: Latin alphabet No. 4
- ISO/IEC 8859-5:1999 Part 5: Latin/Cyrillic alphabet
- ISO/IEC 8859-6:1999 Part 6: Latin/Arabic alphabet
- ISO/IEC 8859-7:2003 Part 7: Latin/Greek alphabet
- ISO/IEC 8859-8:1999 Part 8: Latin/Hebrew alphabet
- ISO/IEC 8859-9:1999 Part 9: Latin alphabet No. 5
- ISO/IEC 8859-10:1998 Part 10: Latin alphabet No. 6
- ISO/IEC 8859-11:2001 Part 11: Latin/Thai alphabet
- ISO/IEC 8859-13:1998 Part 13: Latin alphabet No. 7
- ISO/IEC 8859-14:1998 Part 14: Latin alphabet No. 8 (Celtic)
- ISO/IEC 8859-15:1999 Part 15: Latin alphabet No. 9
- ISO/IEC 8859-16:2001 Part 16: Latin alphabet No. 10
- ISO 8860 Information processing – Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side
- ISO 8860-1:1987 Part 1: Dimensional, physical and magnetic characteristics
- ISO 8860-2:1987 Part 2: Track format
- ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use
- ISO 8871-1:2003 Part 1: Extractables in aqueous autoclavates
- ISO 8871-2:2003 Part 2: Identification and characterization
- ISO 8871-3:2003 Part 3: Determination of released-particle count
- ISO 8871-4:2006 Part 4: Biological requirements and test methods
- ISO 8871-5:2016 Part 5: Functional requirements and testing
- ISO 8872:2003 Aluminium caps for transfusion, infusion and injection bottles – General requirements and test methods
- ISO/IEC 8877:1992 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
- ISO/IEC 8878:1992 Information technology – Telecommunications and information exchange between systems – Use of X.25 to provide the OSI Connection-mode Network Service
- ISO 8879:1986 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
- ISO/IEC 8880 Information technology — Telecommunications and information exchange between systems — Protocol combinations to provide and support the OSI Network Service
- ISO/IEC 8880-1:1990 Part 1: General principles [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
- ISO/IEC 8880-2:1992 Part 2: Provision and support of the connection-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
- ISO/IEC 8880-3:1990 Part 3: Provision and support of the connectionless-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
- ISO/IEC 8881:1989 Information processing systems – Data communications – Use of the X.25 packet level protocol in local area networks
- ISO/IEC 8882 Information technology – Telecommunications and information exchange between systems – X.25 DTE conformance testing
- ISO/IEC 8882-1:1996 Part 1: General principles
- ISO/IEC 8882-2:2000 Part 2: Data link layer conformance test suite
- ISO/IEC 8882-3:2000 Part 3: Packet layer conformance test suite
- ISO 8884:1989 Information processing — Text and office systems — Keyboards for multiple Latin-alphabet languages — Layout and operation [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 8885:1987 Information processing systems — Data communication — High-level data link control procedures — General purpose XID frame information field content and format [Withdrawn without replacement]
- ISO/IEC 8886:1996 Information technology – Open Systems Interconnection – Data link service definition
- ISO 8887 Technical product documentation – Design for manufacturing, assembling, disassembling and end-of-life processing
- ISO 8887-1:2017 Part 1: General concepts and requirements
- ISO 8891:1998 Dental casting alloys with noble metal content of at least 25 % but less than 75 % [Withdrawn: replaced with ISO 22674]
- ISO 8909 Forage harvesters
- ISO 8909-1:1994 Part 1: Vocabulary
- ISO 8910:1993 Machinery and equipment for working the soil – Mouldboard plough working elements – Vocabulary
- ISO 8927:1991 Earth-moving machinery – Machine availability – Vocabulary
- ISO 8930:1987 General principles on reliability for structures – List of equivalent terms
- ISO 8936:2017 Awnings for leisure accommodation vehicles – Requirements and test methods
- ISO 8954 Ferroalloys – Vocabulary
- ISO 8954-1:1990 Part 1: Materials
- ISO 8954-2:1990 Part 2: Sampling and sample preparation
- ISO 8954-3:1990 Part 3: Sieve analysis
- ISO 8957:1996 Information and documentation – Hebrew alphabet coded character sets for bibliographic information interchange
- ISO 8965:2013 Logging industry – Technology – Terms and definitions
- ISO 8979:2004 Pliers and nippers for electronics – Nomenclature
- ISO 8980 Ophthalmic optics – Uncut finished spectacle lenses
- ISO 8980-1:2017 Part 1: Specifications for single-vision and multifocal lenses
- ISO 8980-2:2017 Part 2: Specifications for power-variation lenses
- ISO 8980-3:2013 Part 3: Transmittance specifications and test methods
- ISO 8980-4:2006 Part 4: Specifications and test methods for anti-reflective coatings
- ISO 8980-5:2005 Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
- ISO 8999:2001 Reciprocating internal combustion engines – Graphical symbols
- ISO 9000 – ISO 9999
- [edit]
- ISO 9000:2015 Quality management systems – Fundamentals and vocabulary
- ISO 9001:2015 Quality management systems – Requirements
- ISO/TS 9002:2016 Quality management systems – Guidelines for the application of ISO 9001:2015
- ISO 9004:2018 Managing for the sustained success of an organization – A quality management approach
- ISO/TR 9007:1987 Information processing systems – Concepts and terminology for the conceptual schema and the information base
- ISO 9019:1995 Securities – Numbering of certificates
- ISO 9022 Optics and optical instruments – Environmental test methods
- ISO 9022-1:2016 Definitions, extent of testing
- ISO 9022-2:2015 Cold, heat and humidity
- ISO 9022-3:2015 Mechanical stress
- ISO 9022-4:2014 Salt mist
- ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
- ISO 9022-6:2015 Dust
- ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
- ISO 9031:1987 Air cargo equipment – Handling systems for unit load devices (ULDs) – Symbols for pictorial representation
- ISO 9036:1987 Information processing – Arabic 7-bit coded character set for information interchange
- ISO/IEC 9040:1997 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Service
- ISO/IEC 9041 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Protocol
- ISO/IEC 9041-1:1997 Part 1: Specification
- ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
- ISO 9045:1990 Industrial screens and screening – Vocabulary
- ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
- ISO 9060: Solar energy — Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
- ISO/IEC 9066 Information technology – Open Systems Interconnection – Reliable Transfer[Note 4]
- ISO/IEC 9066-1:1989 Part 1: Model and service definition
- ISO/IEC 9066-2:1989 Part 2: Protocol specification
- ISO/IEC 9066-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
- ISO 9069:1988 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
- ISO/IEC 9070:1991 Information technology – SGML support facilities – Registration procedures for public text owner identifiers
- ISO/IEC 9072 Information technology – Open Systems Interconnection – Remote Operations[Note 4]
- ISO/IEC 9072-1:1989 Part 1: Model, notation and service definition
- ISO/IEC 9072-2:1989 Part 2: Protocol specification
- ISO/IEC 9072-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 9075 Information technology – Database languages – SQL
- ISO 9086 Wood – Methods of physical and mechanical testing – Vocabulary
- ISO 9086-1:1987 Part 1: General concepts and macrostructure
- ISO 9092:2011 Textiles – Nonwovens – Definition
- ISO 9095:1990 Steel tubes – Continuous character marking and colour coding for material identification
- ISO 9123:2001 Measurement of liquid flow in open channels – Stage-fall-discharge relationships
- ISO/IEC 9126 Software engineering – Product quality
- ISO 9128:2006 Road vehicles – Graphical symbols to designate brake fluid types
- ISO 9141 Road vehicles – Diagnostic systems[Note 4]
- ISO 9141-2 CARB requirements for interchange of digital information
- ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
- ISO 9144:1991 Securities – Optical character recognition line – Position and structure
- ISO 9160:1988 Information processing – Data encipherment – Physical layer interoperability requirements
- ISO 9170 Terminal units for medical gas pipeline systems
- ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
- ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
- ISO/IEC 9171 Information technology – 130 mm optical disk cartridge, write once, for information interchange
- ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
- ISO/IEC 9171-2:1990 Part 2: Recording format
- ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
- ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
- ISO 9177 Mechanical pencils for technical drawings[Note 4]
- ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
- ISO 9177-2:1989 Part 2: Black leads – Classification and dimensions
- ISO 9177-3:1994 Part 3: Black leads – Bending strengths of HB leads
- ISO 9180:1988 Black leads for wood-cased pencils – Classification and diameters
- ISO 9186 Graphical symbols – Test methods
- ISO 9186-1:2014 Part 1: Method for testing comprehensibility
- ISO 9186-2:2008 Part 2: Method for testing perceptual quality
- ISO 9186-3:2014 Part 3: Method for testing symbol referent association
- ISO 9187 Injection equipment for medical use
- ISO 9187-1:2010 Part 1: Ampoules for injectables
- ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
- ISO 9195:1992 Liquid flow measurement in open channels – Sampling and analysis of gravel-bed material
- ISO 9196:1992 Liquid flow measurement in open channels – Flow measurements under ice conditions
- ISO 9211 Optics and photonics – Optical coatings
- ISO 9211-1:2010 Part 1: Definitions
- ISO/TR 9212:2015 Hydrometry – Methods of measurement of bedload discharge
- ISO 9222 Technical drawings – Seals for dynamic application
- ISO 9222-1:1989 Part 1: General simplified representation
- ISO 9222-2:1989 Part 2: Detailed simplified representation
- ISO 9223 Corrosion of metals and alloys – Corrosivity of atmospheres – Classification, determination and estimation
- ISO 9224 Corrosion of metals and alloys – Corrosivity of atmospheres – Guiding values for the corrosivity categories
- ISO 9225 Corrosion of metals and alloys – Corrosivity of atmospheres – Measurement of environmental parameters affecting corrosivity of atmospheres
- ISO 9226 Corrosion of metals and alloys – Corrosivity of atmospheres – Determination of corrosion rate of standard specimens for the evaluation of corrosivity
- ISO 9227:2017 Corrosion tests in artificial atmospheres – Salt spray tests
- ISO 9229:2007 Thermal insulation – Vocabulary
- ISO 9230:2007 Information and documentation – Determination of price indexes for print and electronic media purchased by libraries
- ISO 9232:2003 Yogurt – Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
- ISO 9235:2013 Aromatic natural raw materials – Vocabulary
- ISO 9241 Ergonomics of human-system interaction
- ISO 9244:2008 Earth-moving machinery – Machine safety labels – General principles
- ISO 9245:1991 Earth-moving machinery – Machine productivity – Vocabulary, symbols and units
- ISO 9247:1990 Earth-moving machinery – Electrical wires and cables – Principles of identification and marking
- ISO/TS 9250 Earth-moving machinery – Multilingual listing of equivalent terms
- ISO/TS 9250-1:2012 Part 1: General
- ISO/TS 9250-2:2012 Part 2: Performance and dimensions
- ISO 9251:1987 Thermal insulation – Heat transfer conditions and properties of materials – Vocabulary
- ISO 9264:1988 Woodworking machines – Narrow belt sanding machines with sliding table or frame – Nomenclature
- ISO 9265:1988 Woodworking machines – Multi-spindle boring machines – Nomenclature
- ISO 9266:1988 Woodworking machines – Universal tool and cutter sharpeners – Nomenclature
- ISO 9267:1988 Woodworking machines – Bandsaw blade sharpening machines – Nomenclature
- ISO 9268:1988 Implants for surgery – Metal bone screws with conical under-surface of head – Dimensions
- ISO 9269:1988 Implants for surgery – Metal bone plates – Holes and slots corresponding to screws with conical under-surface
- ISO/IEC 9281 Information technology – Picture coding methods
- ISO/IEC 9281-1:1990 Part 1: Identification
- ISO/IEC 9281-2:1990 Part 2: Procedure for registration
- ISO/IEC 9282 Information processing – Coded representation of pictures
- ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
- ISO 9288:1989 Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
- ISO/IEC 9293:1994 Information technology – Volume and file structure of disk cartridges for information interchange
- ISO 9295:2015 Acoustics – Determination of high-frequency sound power levels emitted by machinery and equipment
- ISO 9296:2017 Acoustics – Declared noise emission values of information technology and telecommunications equipment
- ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
- ISO 9308 Water quality – Enumeration of Escherichia coli and coliform bacteria[Note 4]
- ISO 9308-1:2014 Part 1: Membrane filtration method for waters with low bacterial background flora
- ISO 9308-2:2012 Part 2: Most probable number method
- ISO 9308-3:1998 Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water
- ISO 9314 Information processing systems Fibre Distributed Data Interface (FDDI)
- ISO 9314-1:1989 Part 1: Token Ring Physical Layer Protocol (PHY)
- ISO 9314-2:1989 Part 2: Token Ring Media Access Control (MAC)
- ISO/IEC 9314-3:1990 Part 3: Physical Layer Medium Dependent (PMD)
- ISO/IEC 9314-4:1999 Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
- ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
- ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
- ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
- ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
- ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
- ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
- ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
- ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
- ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI – Station Management Conformance Testing (SMT-ATS)
- ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
- ISO 9315:1989 Information processing systems – Interface between flexible disk cartridge drives and their host controllers
- ISO/IEC 9316:1995 Information technology – Small Computer System Interface-2
- ISO/IEC 9316-2:2000 Information technology – Small computer system interface-2 (SCSI-2) – Part 2: Common Access Method (CAM) Transport and SCSI interface module
- ISO/IEC 9318 Information technology – Intelligent Peripheral Interface
- ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
- ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
- ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
- ISO 9334:2012 Optics and photonics – Optical transfer function – Definitions and mathematical relationships
- ISO 9335:2012 Optics and photonics – Optical transfer function – Principles and procedures of measurement
- ISO 9342 Optics and optical instruments – Test lenses for calibration of focimeters
- ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
- ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
- ISO 9346:2007 Hygrothermal performance of buildings and building materials – Physical quantities for mass transfer – Vocabulary
- ISO 9360 Anaesthetic and respiratory equipment – Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
- ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
- ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
- ISO 9362:2014 Banking – Banking telecommunication messages – Business identifier code (BIC)
- ISO 9368 Measurement of liquid flow in closed conduits by the weighing method – Procedures for checking installations
- ISO 9368-1:1990 Part 1: Static weighing systems
- ISO 9394:2012 Ophthalmic optics – Contact lenses and contact lens care products – Determination of biocompatibility by ocular study with rabbit eyes
- ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
- ISO 9431:1990 Construction drawings – Spaces for drawing and for text, and title blocks on drawing sheets
- ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
- ISO 9488:1999 Solar energy – Vocabulary
- ISO 9493:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Dial test indicators (lever type) – Design and metrological characteristics
- ISO/IEC 9496:2003 CHILL – The ITU-T programming language
- ISO 9506 Industrial automation systems – Manufacturing Message Specification
- ISO/IEC 9529 Information processing systems – Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
- ISO/IEC 9541 Information technology – Font information interchange
- ISO/IEC 9541-1:2012 Part 1: Architecture
- ISO/IEC 9541-2:2012 Part 2: Interchange Format
- ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
- ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
- ISO 9542:1988 Information processing systems – Telecommunications and information exchange between systems – End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
- ISO 9543:1989 Information processing systems – Information exchange between systems – Synchronous transmission signal quality at DTE/DCE interfaces
- ISO/IEC 9545:1994 Information technology – Open Systems Interconnection – Application Layer structure
- ISO/TR 9547:1988 Programming language processors – Test methods – Guidelines for their development and acceptability
- ISO/IEC 9548 Information technology – Open Systems Interconnection – Connectionless Session protocol
- ISO/IEC 9548-1:1996 Protocol specification
- ISO/IEC 9548-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 9549:1990 Information technology – Galvanic isolation of balanced interchange circuit
- ISO 9555 Measurement of liquid flow in open channels – Tracer dilution methods for the measurement of steady flow
- ISO 9555-1:1994 Part 1: General
- ISO 9555-3:1992 Part 3: Chemical tracers
- ISO 9555-4:1992 Part 4: Fluorescent tracers
- ISO 9564 Financial services – Personal Identification Number (PIN) management and security
- ISO 9568:1993 Cinematography – Background acoustic noise levels in theatres, review rooms and dubbing rooms
- ISO/IEC TR 9573:1988 Information processing – SGML support facilities – Techniques for using SGML
- ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
- ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
- ISO/IEC 9574:1992 Information technology – Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
- ISO/IEC TR 9575:1995 Information technology – Telecommunications and information exchange between systems – OSI Routeing Framework
- ISO/IEC 9576 Information technology – Open Systems Interconnection – Connectionless Presentation protocol
- ISO/IEC 9576-1:1995 Protocol specification
- ISO/IEC 9576-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC TR 9577:1999 Information technology – Protocol identification in the network layer
- ISO/IEC TR 9578:1990 Information technology – Communication interface connectors used in local area networks
- ISO/IEC 9579:2000 Information technology – Remote database access for SQL with security enhancement
- ISO 9583:1993 Implants for surgery – Non-destructive testing – Liquid penetrant inspection of metallic surgical implants
- ISO 9584:1993 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
- ISO 9585:1990 Implants for surgery – Determination of bending strength and stiffness of bone plates
- ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer’s Hierarchical Interactive Graphics System (PHIGS)
- ISO/IEC 9593 Information technology – Computer graphics – Programmer’s Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 4]
- ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
- ISO/IEC 9594-1:2017 Part 1: Overview of concepts, models and services
- ISO/IEC 9594-2:2017 Part 2: Models
- ISO/IEC 9594-3:2017 Part 3: Abstract service definition
- ISO/IEC 9594-4:2017 Part 4: Procedures for distributed operation
- ISO/IEC 9594-5:2017 Part 5: Protocol specifications
- ISO/IEC 9594-6:2017 Part 6: Selected attribute types
- ISO/IEC 9594-7:2017 Part 7: Selected object classes
- ISO/IEC 9594-8:2017 Part 8: Public-key and attribute certificate frameworks
- ISO/IEC 9594-9:2017 Part 9: Replication
- ISO/IEC 9595:1998 Information technology – Open Systems Interconnection – Common management information service
- ISO/IEC 9596 Information technology – Open Systems Interconnection – Common management information protocol
- ISO/IEC 9596-1:1998 Part 1: Specification
- ISO/IEC 9596-2:1993 Protocol Implementation Conformance Statement (PICS) proforma
- ISO 9611:1996 Acoustics – Characterization of sources of structure-borne sound with respect to sound radiation from connected structures – Measurement of velocity at the contact points of machinery when resiliently mounted
- ISO 9613 Acoustics – Attenuation of sound during propagation outdoors
- ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
- ISO 9613-2:1996 Part 2: General method of calculation
- ISO 9614 Acoustics – Determination of sound power levels of noise sources using sound intensity
- ISO 9614-1:1993 Part 1: Measurement at discrete points
- ISO 9614-2:1996 Part 2: Measurement by scanning
- ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
- ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
- ISO/IEC 9636 Information technology – Computer graphics – Interfacing techniques for dialogues with graphical devices (CGI) – Functional specification
- ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
- ISO/IEC 9636-2:1991 Part 2: Control
- ISO/IEC 9636-3:1991 Part 3: Output
- ISO/IEC 9636-4:1991 Part 4: Segments
- ISO/IEC 9636-5:1991 Part 5: Input and echoing
- ISO/IEC 9636-6:1991 Part 6: Raster
- ISO/IEC 9637 Information technology – Computer graphics – Interfacing techniques for dialogues with graphical devices (CGI) – Data stream binding
- ISO/IEC 9637-1:1994 Part 1: Character encoding
- ISO/IEC 9637-2:1992 Part 2: Binary encoding
- ISO/IEC 9638 Information technology – Computer graphics – Interfacing techniques for dialogues with graphical devices (CGI) – Language bindings
- ISO/IEC 9638-3:1994 Part 3: Ada
- ISO 9645:1990 Acoustics – Measurement of noise emitted by two-wheeled mopeds in motion – Engineering method
- ISO/IEC 9646 Information technology—Open Systems Interconnection—Conformance testing methodology and framework
- ISO/IEC 9646-1:1994 Part 1: General concepts
- ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
- ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (TTCN)
- ISO/IEC 9646-4:1994 Part 4: Test realization
- ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
- ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
- ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
- ISO 9660:1988 Information processing – Volume and file structure of CD-ROM for information interchange
- ISO/IEC 9661:1994 Information technology – Data interchange on 12,7 mm wide magnetic tape cartridges – 18 tracks, 1 491 data bytes per millimetre
- ISO 9662:1994 Aircraft equipment – Environmental and operating conditions for airborne equipment – Humidity, temperature and pressure tests
- ISO 9668:1990 Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method [Withdrawn: replaced with ISO 12830]
- ISO 9687:2015 Dentistry – Graphical symbols for dental equipment
- ISO 9688:1990 Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
- ISO 9696:2007 Water quality – Measurement of gross alpha activity in non-saline water – Thick source method
- ISO 9706:1994 Information and documentation – Paper for documents – Requirements for permanence
- ISO 9707:2008 Information and documentation – Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
- ISO 9712:2012 Non-destructive testing – Qualification and certification of NDT personnel
- ISO 9713:2002 Neurosurgical implants – Self-closing intracranial aneurysm clips
- ISO 9714 Orthopaedic drilling instruments
- ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
- ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 4]
- ISO 9735-1:2002 Part 1: Syntax rules common to all parts
- ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
- ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
- ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type – CONTRL)
- ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
- ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type – AUTACK)
- ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
- ISO 9735-8:2002 Part 8: Associated data in EDI
- ISO 9735-9:2002 Part 9: Security key and certificate management message (message type – KEYMAN)
- ISO 9735-10:2014 Part 10: Syntax service directories
- ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
- ISO/IEC 9796-2:2010 Part 2: Integer factorization based mechanisms
- ISO/IEC 9796-3:2006 Part 3: Discrete logarithm based mechanisms
- ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
- ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
- ISO/IEC 9797-2:2011 Part 2: Mechanisms using a dedicated hash-function
- ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
- ISO/IEC 9798 Information technology – Security techniques – Entity authentication
- ISO/IEC 9798-1:2010 Part 1: General
- ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
- ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
- ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
- ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
- ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
- ISO 9801:2009 Ophthalmic instruments – Trial case lenses
- ISO 9802:1996 Raw optical glass – Vocabulary
- ISO/IEC 9804:1998 Information technology – Open Systems Interconnection – Service definition for the Commitment, Concurrency and Recovery service element
- ISO/IEC 9805 Information technology – Open Systems Interconnection – Protocol for the Commitment, Concurrency and Recovery service element
- ISO/IEC 9805-1:1998 Protocol specification
- ISO/IEC 9805-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/TR 9824:2007 Hydrometry – Measurement of free surface flow in closed conduits
- ISO 9825:2005 Hydrometry – Field measurement of discharge in large rivers and rivers in flood
- ISO 9826:1992 Measurement of liquid flow in open channels – Parshall and SANIIRI flumes
- ISO 9827:1994 Measurement of liquid flow in open channels by weirs and flumes – Streamlined triangular profile weirs
- ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
- ISO/IEC 9834-1:2012 General procedures and top arcs of the international object identifier tree
- ISO/IEC 9834-2:1993 Part 2: Registration procedures for OSI document types
- ISO/IEC 9834-3:2008 Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
- ISO/IEC 9834-4:1991 Part 4: Register of VTE Profiles
- ISO/IEC 9834-5:1991 Part 5: Register of VT Control Object Definitions
- ISO/IEC 9834-6:2005 Registration of application processes and application entities
- ISO/IEC 9834-7:2008 Joint ISO and ITU-T Registration of International Organizations
- ISO/IEC 9834-8:2014 Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers
- ISO/IEC 9834-9:2008 Registration of object identifier arcs for applications and services using tag-based identification
- ISO 9846 Solar energy — Calibration of a pyranometer using a pyrheliometer
- ISO 9847 Solar energy — Calibration of field pyranometers by comparison to a reference pyranometer
- ISO 9849:2017 Optics and optical instruments – Geodetic and surveying instruments – Vocabulary
- ISO 9851:1990 Continuous mechanical handling equipment – Overhead electrical monorail conveyors – Definitions and safety rules
- ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
- ISO 9873:2017 Dentistry – Intra-oral mirrors
- ISO 9878:1990 Micrographics – Graphical symbols for use in microfilming
- ISO 9897:1997 Freight containers – Container equipment data exchange (CEDEX) – General communication codes
- ISO/IEC 9899:2018 Programming languages – C
- ISO 9902 Textile machinery – Noise test code
- ISO 9902-1:2001 Part 1: Common requirements
- ISO 9902-2:2001 Part 2: Spinning preparatory and spinning machinery
- ISO 9902-3:2001 Part 3: Nonwoven machinery
- ISO 9902-4:2001 Part 4: Yarn processing, cordage and rope manufacturing machinery
- ISO 9902-5:2001 Part 5: Weaving and knitting preparatory machinery
- ISO 9902-6:2001 Part 6: Fabric manufacturing machinery
- ISO 9902-7:2001 Part 7: Dyeing and finishing machinery
- ISO 9926 Cranes – Training of operators[Note 4]
- ISO 9926-1:1990 Part 1: General
- ISO 9926-3:2016 Part 3: Tower cranes
- ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
- ISO 9947:2005 Textile machinery and accessories – Two-for-one twisters – Vocabulary
- ISO 9949 Urine absorbing aids – Vocabulary
- ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
- ISO 9949-2:1993 Part 2: Products
- ISO 9949-3:1993 Part 3: Identification of product types
- ISO 9951:1993 Measurement of gas flow in closed conduits – Turbine meters
- ISO 9957 Fluid draughting media
- ISO 9957-1:1992 Part 1: Water-based India ink – Requirements and test conditions
- ISO 9957-2:1995 Part 2: Water-based non-India ink – Requirements and test conditions
- ISO 9957-3:1997 Part 3: Water-based coloured draughting inks – Requirements and test conditions
- ISO 9958 Draughting media for technical drawings – Draughting film with polyester base
- ISO 9958-1:1992 Part 1: Requirements and marking
- ISO 9958-2:1992 Part 2: Determination of properties
- ISO 9959 Numerically controlled draughting machines – Drawing test for the evaluation of performance
- ISO 9959-1:1992 Part 1: Vector plotters
- ISO 9960 Draughting instruments with or without graduation
- ISO 9960-1:1992 Part 1: Draughting scale rules
- ISO 9961:1992 Draughting media for technical drawings – Natural tracing paper
- ISO 9962 Manually operated draughting machines
- ISO 9962-1:1992 Part 1: Definitions, classification and designation
- ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
- ISO/IEC 9973:2013 Information technology – Computer graphics, image processing and environmental data representation – Procedures for registration of items
- ISO 9984:1996 Information and documentation – Transliteration of Georgian characters into Latin characters
- ISO 9985:1996 Information and documentation – Transliteration of Armenian characters into Latin characters
- ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
- ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
- ISO 9997:1999 Dental cartridge syringes
- ISO 9999 Assistive products for persons with disability – Classification and terminology
- ISO/IEC TR 10000 Information technology – Framework and taxonomy of International Standardized Profiles
- ISO/IEC TR 10000-1:1998 Part 1: General principles and documentation framework
- ISO/IEC TR 10000-2:1998 Part 2: Principles and Taxonomy for OSI Profiles
- ISO/IEC TR 10000-3:1998 Part 3: Principles and Taxonomy for Open System Environment Profiles
- ISO 10001:2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations
- ISO 10002:2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations
- ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
- ISO 10004:2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring
- ISO 10005:2005 Quality management systems – Guidelines for quality plans
- ISO 10006:2003 Quality management systems – Guidelines for quality management in projects
- ISO 10007:2017 Quality management systems – Guidelines for configuration management
- ISO 10008:2013 Quality management – Customer satisfaction – Guidelines for business-to-consumer electronic commerce transactions
- ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
- ISO/TR 10013:2001 Guidelines for quality management system documentation
- ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits
- ISO 10015:1999 Quality management – Guidelines for training
- ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
- ISO 10018:2012 Quality management – Guidelines on people involvement and competence
- ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
- ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
- ISO/IEC 10022:1996 Information technology – Open Systems Interconnection – Physical Service Definition
- ISO/IEC 10026 Information technology – Open Systems Interconnection – Distributed Transaction Processing
- ISO/IEC 10026-1:1998 Part 1: OSI TP Model
- ISO/IEC 10026-2:1998 Part 2: OSI TP Service
- ISO/IEC 10026-3:1998 Part 3: Protocol specification
- ISO/IEC 10026-4:1995 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 10026-5:1998 Part 5: Application context proforma and guidelines when using OSI TP
- ISO/IEC 10026-6:1995 Part 6: Unstructured Data Transfer
- ISO/IEC 10027:1990 Information technology – Information Resource Dictionary System (IRDS) framework
- ISO/IEC 10028:1993 Information technology – Telecommunications and information exchange between systems – Definition of the relaying functions of a Network layer intermediate system
- ISO/IEC 10030:1995 Information technology – Telecommunications and information exchange between systems – End System Routing Information Exchange Protocol for use in conjunction with ISO/IEC 8878
- ISO/IEC TR 10032:2003 Information technology – Reference Model of Data Management
- ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards
- ISO/IEC 10035 Information technology – Open Systems Interconnection – Connectionless protocol for the Association Control Service Element
- ISO/IEC 10035-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 10036:1996 Information technology – Font information interchange – Procedures for registration of font-related identifiers
- ISO/IEC 10040:1998 Information technology – Open Systems Interconnection – Systems management overview
- ISO 10052:2004 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method
- ISO 10055:1996 Mechanical vibration – Vibration testing requirements for shipboard equipment and machinery components
- ISO 10075 Ergonomic principles related to mental workload
- ISO 10075-1:2017 Part 1: General issues and concepts, terms and definitions
- ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
- ISO 10079 Medical suction equipment
- ISO 10079-1:2015 Part 1: Electrically powered suction equipment
- ISO 10079-2:2014 Part 2: Manually powered suction equipment
- ISO 10079-3:2014 Part 3: Suction equipment powered from a vacuum or positive pressure gas source
- ISO/IEC 10089:1991 Information technology – 130 mm rewritable optical disk cartridge for information interchange
- ISO/IEC 10090:1992 Information technology – 90 mm optical disk cartridges, rewritable and read only, for data interchange
- ISO/IEC TR 10091:1995 Information technology – Technical aspects of 130 mm optical disk cartridge write-once recording format
- ISO 10110 Optics and photonics – Preparation of drawings for optical elements and systems[Note 3]
- ISO 10110-1:2006 Part 1: General
- ISO 10110-2:1996 Part 2: Material imperfections – Stress birefringence
- ISO 10110-3:1996 Part 3: Material imperfections – Bubbles and inclusions
- ISO 10110-4:1997 Part 4: Material imperfections – Inhomogeneity and striae
- ISO 10110-5:2015 Part 5: Surface form tolerances
- ISO 10110-6:2015 Part 6: Centring tolerances
- ISO 10110-7:2017 Part 7: Surface imperfections
- ISO 10110-8:2010 Part 8: Surface texture; roughness and waviness
- ISO 10110-9:2016 Part 9: Surface treatment and coating
- ISO 10110-10:2004 Part 10: Table representing data of optical elements and cemented assemblies
- ISO 10110-11:2016 Part 11: Non-toleranced data
- ISO 10110-12:2007 Part 12: Aspheric surfaces
- ISO 10110-14:2007 Part 14: Wavefront deformation tolerance
- ISO 10110-17:2004 Part 17: Laser irradiation damage threshold
- ISO 10110-19:2015 Part 19: General description of surfaces and components
- ISO 10112:1991 Damping materials – Graphical presentation of the complex modulus
- ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
- ISO/IEC 10118 Information technology – Security techniques – Hash-functions
- ISO/IEC 10118-1:2016 Part 1: General
- ISO/IEC 10118-2:2010 Part 2: Hash-functions using an n-bit block cipher
- ISO/IEC 10118-3:2004 Part 3: Dedicated hash-functions
- ISO/IEC 10118-4:1998 Part 4: Hash-functions using modular arithmetic
- ISO 10132:1993 Textiles – Textured filament yarn – Definitions
- ISO 10135:2007 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD)
- ISO/IEC 10149:1995 Information technology – Data interchange on read-only 120 mm optical data disks (CD-ROM)
- ISO 10159:2011 Health informatics – Messages and communication – Web access reference manifest
- ISO 10160:2015 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
- ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
- ISO 10161-1:2014 Part 1: Protocol specification
- ISO 10161-2:2014 Part 2: Protocol implementation conformance statement (PICS) proforma
- ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management
- ISO/IEC 10164-1:1993 Object Management Function
- ISO/IEC 10164-2:1993 State Management Function
- ISO/IEC 10164-3:1993 Attributes for representing relationships
- ISO/IEC 10164-4:1992 Alarm reporting function
- ISO/IEC 10164-5:1993 Event Report Management Function
- ISO/IEC 10164-6:1993 Log control function
- ISO/IEC 10164-7:1992 Security alarm reporting function
- ISO/IEC 10164-8:1993 Security audit trail function
- ISO/IEC 10164-9:1995 Objects and attributes for access control
- ISO/IEC 10164-10:1995 Usage metering function for accounting purposes
- ISO/IEC 10164-11:1994 Metric objects and attributes
- ISO/IEC 10164-12:1994 Test Management Function
- ISO/IEC 10164-13:1995 Summarization Function
- ISO/IEC 10164-14:1996 Confidence and diagnostic test categories
- ISO/IEC 10164-15:2002 Scheduling function
- ISO/IEC 10164-16:1997 Management knowledge management function
- ISO/IEC 10164-17:1996 Change over function
- ISO/IEC 10164-18:1997 Software management function
- ISO/IEC 10164-19:1998 Management domain and management policy management function
- ISO/IEC 10164-20:1999 Time management function
- ISO/IEC 10164-21:1998 Command sequencer for Systems Managenment
- ISO/IEC 10164-22:2000 Response time monitoring
- ISO/IEC 10165 Information technology – Open Systems Interconnection – Structure of management information[Note 3]
- ISO/IEC 10165-1:1993 Management Information Model
- ISO/IEC 10165-2:1992 Definition of management information
- ISO/IEC 10165-4:1992 Part 4: Guidelines for the definition of managed objects
- ISO/IEC 10165-5:1994 Generic management information
- ISO/IEC 10165-6:1997 Requirements and guidelines for implementation conformance statement proformas associated with OSI management
- ISO/IEC 10165-7:1996 General relationship model
- ISO/IEC 10165-8:2000 Managed objects for supporting upper layers
- ISO/IEC 10165-9:2000 Systems management application layer managed objects
- ISO/IEC 10166 Information technology – Text and office systems – Document Filing and Retrieval (DFR)
- ISO/IEC 10166-1:1991 Part 1: Abstract service definition and procedures
- ISO/IEC 10166-2:1991 Part 2: Protocol specification
- ISO/IEC TR 10171:2000 Information technology – Telecommunications and information exchange between systems – List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures, list of standard XID format identifiers, list of standard mode-setting information field format identifiers, and list of standard user-defined parameter set identification values
- ISO/IEC 10173:1998 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
- ISO/IEC 10175 Information technology – Text and office systems – Document Printing Application (DPA)
- ISO/IEC 10175-1:1996 Part 1: Abstract service definition and procedures
- ISO/IEC 10175-2:1996 Part 2: Protocol specification
- ISO/IEC 10175-3:2000 Part 3: Management abstract service definitions and procedures
- ISO/IEC TR 10176:2003 Information technology – Guidelines for the preparation of programming language standards
- ISO/IEC 10177:1993 Information technology – Telecommunications and information exchange between systems – Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol
- ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
- ISO/IEC 10180:1995 Information technology – Processing languages – Standard Page Description Language (SPDL)
- ISO/IEC 10181 Information technology – Open Systems Interconnection – Security frameworks for open systems
- ISO/IEC 10181-1:1996 Overview
- ISO/IEC 10181-2:1996 Authentication framework
- ISO/IEC 10181-3:1996 Access control framework
- ISO/IEC 10181-4:1997 Non-repudiation framework
- ISO/IEC 10181-5:1996 Confidentiality framework
- ISO/IEC 10181-6:1996 Integrity framework
- ISO/IEC 10181-7:1996 Security audit and alarms framework
- ISO/IEC TR 10182:2016 Information technology – Programming languages, their environments and system software interfaces – Guidelines for language bindings
- ISO/IEC TR 10183 Information technology – Text and office systems – Office Document Architecture (ODA) and interchange format – Technical Report on ISO 8613 implementation testing
- ISO/IEC TR 10183-1:1993 Part 1: Testing methodology
- ISO/IEC TR 10183-2:1993 Part 2: Framework for abstract test cases
- ISO/IEC 10192 Information technology – Home Electronic System (HES) interfaces
- ISO/IEC 10192-1:2002 Part 1: Universal Interface (UI) Class 1
- ISO/IEC TR 10192-2:2000 Part 2: Simple Interfaces Type 1
- ISO/IEC 10206:1991 Information technology – Programming languages – Extended Pascal
- ISO 10209:2012 Technical product documentation – Vocabulary – Terms relating to technical drawings, product definition and related documentation
- ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
- ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
- ISO 10241 Terminological entries in standards
- ISO 10241-1:2011 Part 1: General requirements and examples of presentation
- ISO 10241-2:2012 Part 2: Adoption of standardized terminological entries
- ISO 10243:2010 Tools for pressing – Compression springs with rectangular section – Housing dimensions and colour coding
- ISO 10244:2010 Document management – Business process baselining and analysis
- ISO 10254:2016 Air cargo and ground equipment – Vocabulary
- ISO/TR 10255:2009 Document management applications – Optical disk storage technology, management and standards
- ISO 10263 Earth-moving machinery – Operator enclosure environment
- ISO 10263-1:2009 Part 1: Terms and definitions
- ISO 10265:2008 Earth-moving machinery – Crawler machines – Performance requirements and test procedures for braking systems
- ISO 10272 Microbiology of the food chain – Horizontal method for detection and enumeration of Campylobacter spp.
- ISO 10272-1:2017 Part 1: Detection method
- ISO 10272-2:2017 Part 2: Colony-count technique
- ISO 10273:2017 Microbiology of the food chain – Horizontal method for the detection of pathogenic Yersinia enterocolitica
- ISO/IEC 10279:1991 Information technology – Programming languages – Full BASIC
- ISO 10284:1997 Cinematography – Graphical symbols – Description
- ISO 10286:2015 Gas cylinders – Terminology
- ISO 10302 Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
- ISO 10302-1:2011 Part 1: Airborne noise measurement
- ISO 10302-2:2011 Part 2: Structure-borne vibration measurements
- ISO 10303 Industrial automation systems and integration – Product data representation and exchange
- ISO 10316:1990 Shipbuilding — Class B magnetic compasses — Tests and certification [Withdrawn: replaced by ISO 25862]
- ISO 10318 Geosynthetics
- ISO 10318-1:2015 Part 1: Terms and definitions
- ISO 10318-2:2015 Part 2: Symbols and pictograms
- ISO 10322 Ophthalmic optics – Semi-finished spectacle lens blanks
- ISO 10322-1:2016 Part 1: Specifications for single-vision and multifocal lens blanks
- ISO 10322-2:2016 Part 2: Specifications for progressive-power and degressive-power lens blanks
- ISO 10324:1997 Information and documentation – Holdings statements – Summary level
- ISO 10328:2016 Prosthetics – Structural testing of lower-limb prostheses – Requirements and test methods
- ISO 10334:1994 Implants for surgery – Malleable wires for use as sutures and other surgical applications
- ISO 10341:2012 Ophthalmic instruments – Refractor heads
- ISO 10342:2010 Ophthalmic instruments – Eye refractometers
- ISO 10343:2014 Ophthalmic instruments – Ophthalmometers
- ISO 10360 Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring systems (CMS)[Note 3]
- ISO 10360-1:2000 Part 1: Vocabulary
- ISO 10360-2:2009 Part 2: CMMs used for measuring linear dimensions
- ISO 10360-3:2000 Part 3: CMMs with the axis of a rotary table as the fourth axis
- ISO 10360-4:2000 Part 4: CMMs used in scanning measuring mode
- ISO 10360-5:2010 Part 5: CMMs using single and multiple stylus contacting probing systems
- ISO 10360-6:2001 Part 6: Estimation of errors in computing Gaussian associated features
- ISO 10360-7:2011 Part 7: CMMs equipped with imaging probing systems
- ISO 10360-8:2013 Part 8: CMMs with optical distance sensors
- ISO 10360-9:2013 Part 9: CMMs with multiple probing systems
- ISO 10360-10:2016 Part 10: Laser trackers for measuring point-to-point distances
- ISO 10360-12:2016 Part 12: Articulated arm coordinate measurement machines (CMM)
- ISO/IEC 10367:1991 Information technology – Standardized coded graphic character sets for use in 8-bit codes
- ISO/IEC 10373 Identification cards – Test methods
- ISO/IEC 10373-1:2006 Part 1: General characteristics
- ISO/IEC 10373-2:2015 Part 2: Cards with magnetic stripes
- ISO/IEC 10373-3:2010 Part 3: Integrated circuit cards with contacts and related interface devices
- ISO/IEC 10373-5:2014 Part 5: Optical memory cards
- ISO/IEC 10373-6:2016 Part 6: Proximity cards
- ISO/IEC 10373-7:2008 Part 7: Vicinity cards
- ISO/IEC 10373-8:2011 Part 8: USB-ICC
- ISO/IEC 10373-9:2011 Part 9: Optical memory cards – Holographic recording method
- ISO 10377:2013 Consumer product safety – Guidelines for suppliers
- ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
- ISO 10383:2012 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
- ISO 10386:1994 Ferroboron – Specification and conditions of delivery
- ISO 10387:1994 Metal chrome – Specification and conditions of delivery
- ISO 10393:2013 Consumer product recall – Guidelines for suppliers
- ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
- ISO 10487 Passenger cars – Connections for car radios[Note 3]
- ISO 10494:1993 Gas turbines and gas turbine sets – Measurement of emitted airborne noise – Engineering/survey method
- ISO/IEC 10514 Information technology – Programming languages
- ISO/IEC 10514-1:1996 Part 1: Modula-2, Base Language
- ISO/IEC 10514-2:1998 Part 2: Generics Modula-2
- ISO/IEC 10514-3:1998 Part 3: Object Oriented Modula-2
- ISO 10524 Pressure regulators for use with medical gases
- ISO 10524-1:2006 Part 1: Pressure regulators and pressure regulators with flow-metering devices
- ISO 10524-2:2005 Part 2: Manifold and line pressure regulators
- ISO 10524-3:2005 Part 3: Pressure regulators integrated with cylinder valves
- ISO 10524-4:2008 Part 4: Low-pressure regulators
- ISO 10534 Acoustics – Determination of sound absorption coefficient and impedance in impedance tubes
- ISO 10534-1:1996 Part 1: Method using standing wave ratio
- ISO 10534-2:1998 Part 2: Transfer-function method
- ISO/IEC 10536 Identification cards – Contactless integrated circuit(s) cards – Close-coupled cards[Note 3]
- ISO/IEC 10536-1:2000 Part 1: Physical characteristics
- ISO/IEC 10536-2:1995 Part 2: Dimensions and location of coupling areas
- ISO/IEC 10536-3:1996 Part 3: Electronic signals and reset procedures
- ISO/IEC 10538:1991 Information technology – Control functions for text communication
- ISO 10555 Intravascular catheters – Sterile and single-use catheters
- ISO 10555-1:2013 Part 1: General requirements
- ISO 10555-3:2013 Part 3: Central venous catheters
- ISO 10555-4:2013 Part 4: Balloon dilatation catheters
- ISO 10555-5:2013 Part 5: Over-needle peripheral catheters
- ISO 10555-6:2015 Part 6: Subcutaneous implanted ports
- ISO/IEC 10561:1999 Information technology – Office equipment – Printing devices – Method for measuring throughput – Class 1 and Class 2 printers
- ISO 10567:2007 Earth-moving machinery – Hydraulic excavators – Lift capacity
- ISO 10576 Statistical methods – Guidelines for the evaluation of conformity with specified requirements
- ISO 10576-1:2003 Part 1: General principles
- ISO 10579:2010 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
- ISO 10585:1996 Information and documentation – Armenian alphabet coded character set for bibliographic information interchange
- ISO 10586:1996 Information and documentation – Georgian alphabet coded character set for bibliographic information interchange
- ISO/IEC 10588:1993 Information technology – Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode Network Service
- ISO/IEC 10589:2002 Information technology – Telecommunications and information exchange between systems – Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
- ISO 10625:2005 Equipment for crop protection – Sprayer nozzles – Colour coding for identification
- ISO 10628 Flow diagrams for process plants
- ISO/IEC 10641:1993 Information technology – Computer graphics and image processing – Conformance testing of implementations of graphics standards
- ISO/IEC 10646:2020 Information technology — Universal Coded Character Set (UCS)
- ISO 10651 Lung ventilators for medical use – Particular requirements for basic safety and essential performance[Note 3]
- ISO 10651-1:1993 Part 1: Requirements
- ISO 10651-2:1996 Part 2: Particular requirements for home care ventilators
- ISO 10651-3:1997 Part 3: Particular requirements for emergency and transport ventilators
- ISO 10651-4:2002 Part 4: Particular requirements for operator-powered resuscitators
- ISO 10651-5:2006 Part 5: Gas-powered emergency resuscitators
- ISO 10651-6:2004 Part 6: Home-care ventilatory support devices
- ISO 10656:2016 Resistance welding equipment – Transformers – Integrated transformers for welding guns
- ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
- ISO 10667 Assessment service delivery – Procedures and methods to assess people in work and organizational settings
- ISO 10667-1:2011 Part 1: Requirements for the client
- ISO 10667-2:2011 Part 2: Requirements for service providers
- ISO 10668:2010 Brand valuation – Requirements for monetary brand valuation
- ISO 10685 Ophthalmic optics – Spectacle frames and sunglasses electronic catalogue and identification
- ISO 10685-1:2011 Part 1: Product identification and electronic catalogue product hierarchy
- ISO 10685-2:2016 Part 2: Commercial information
- ISO 10685-3:2012 Part 3: Technical information
- ISO 10703:2007 Water quality – Determination of the activity concentration of radionuclides – Method by high resolution gamma-ray spectrometry
- ISO 10705 Water quality – Detection and enumeration of bacteriophages
- ISO 10705-1:1995 Part 1: Enumeration of F-specific RNA bacteriophages
- ISO 10705-2:2000 Part 2: Enumeration of somatic coliphages
- ISO 10705-3:2003 Part 3: Validation of methods for concentration of bacteriophages from water
- ISO 10705-4:2001 Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis
- ISO 10711:2012 Intelligent Transport Systems – Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
- ISO 10718:2015 Cork stoppers – Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
- ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
- ISO/IEC 10728:1993 Information technology – Information Resource Dictionary System (IRDS) Services Interface
- ISO/IEC 10731:1994 Information technology – Open Systems Interconnection – Basic Reference Model – Conventions for the definition of OSI services
- ISO/IEC 10732:1993 Information technology – Use of X.25 Packet Layer Protocol to provide the OSI connection-mode Network Service over the telephone network
- ISO/IEC 10733:1998 Information technology – Elements of management information related to the OSI Network Layer
- ISO/IEC 10736:1995 Information technology – Telecommunications and information exchange between systems – Transport layer security protocol
- ISO/IEC 10737:1998 Information technology – Elements of management information related to OSI Transport layer
- ISO/IEC 10741 Information technology – User system interfaces – Dialogue interaction
- ISO/IEC 10741-1:1995 Part 1: Cursor control for text editing
- ISO/IEC 10742:1994 Information technology – Telecommunications and information exchange between systems – Elements of management information related to OSI Data Link Layer standards
- ISO/IEC 10744:1997 Information technology – Hypermedia/Time-based Structuring Language (HyTime)
- ISO/IEC 10745:1995 Information technology – Open Systems Interconnection – Upper layers security model
- ISO/IEC 10746 Information technology—Open Distributed Processing—Reference model
- ISO/IEC 10746-1:1998 Overview
- ISO/IEC 10746-2:2009 Foundations
- ISO/IEC 10746-3:2009 Architecture
- ISO/IEC 10746-4:1998 Architectural semantics
- ISO/IEC 10747:1994 Information technology – Telecommunications and information exchange between systems – Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs
- ISO 10754:1996 Information and documentation – Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
- ISO/IEC 10779:2008 Information technology – Office equipment accessibility guidelines for elderly persons and persons with disabilities
- ISO/HL7 10781:2015 Health Informatics – HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)
- ISO 10782 Definitions and attributes of data elements for control and monitoring of textile processes
- ISO 10782-1:1998 Part 1: Spinning, spinning preparatory and related processes
- ISO 10790:2015 Measurement of fluid flow in closed conduits – Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
- ISO 10795:2011 Space systems – Programme management and quality – Vocabulary
- ISO/TS 10797:2012 Nanotechnologies – Characterization of single-wall carbon nanotubes using transmission electron microscopy
- ISO/TS 10798:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- ISO 10801:2010 Nanotechnologies – Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
- ISO 10807:1994 Pipework – Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres
- ISO 10808:2010 Nanotechnologies – Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
- ISO/TS 10811 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment
- ISO/TS 10811-1:2000 Part 1: Measurement and evaluation
- ISO/TS 10811-2:2000 Part 2: Classification
- ISO 10813 Vibration generating machines – Guidance for selection
- ISO 10813-1:2004 Part 1: Equipment for environmental testing
- ISO 10815:2016 Mechanical vibration – Measurement of vibration generated internally in railway tunnels by the passage of trains
- ISO 10816 Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts
- ISO 10816-1:1995 Part 1: General guidelines
- ISO 10816-2:2009 Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO 10816-3:2009 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
- ISO 10816-4:2009 Part 4: Gas turbine sets with fluid-film bearings
- ISO 10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants
- ISO 10816-6:1995 Part 6: Reciprocating machines with power ratings above 100 kW
- ISO 10816-7:2009 Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
- ISO 10816-8:2014 Part 8: Reciprocating compressor systems
- ISO 10816-21:2015 Part 21: Horizontal axis wind turbines with gearbox
- ISO 10817 Rotating shaft vibration measuring systems
- ISO 10817-1:1998 Part 1: Relative and absolute sensing of radial vibration
- ISO 10825:1995 Gears – Wear and damage to gear teeth – Terminology
- ISO 10843:1997 Acoustics – Methods for the description and physical measurement of single impulses or series of impulses
- ISO 10844:2014 Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres
- ISO 10846 Acoustics and vibration – Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- ISO 10846-1:2008 Part 1: Principles and guidelines
- ISO 10846-2:2008 Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
- ISO 10846-3:2002 Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
- ISO 10846-4:2003 Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
- ISO 10846-5:2008 Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
- ISO 10847:1997 Acoustics – In-situ determination of insertion loss of outdoor noise barriers of all types
- ISO/IEC 10859:1997 Information technology – 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
- ISO/IEC 10861:1994 Information technology – Microprocessor systems – High-performance synchronous 32-bit bus: MULTIBUS II
- ISO/TS 10867:2010 Nanotechnologies – Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- ISO/TS 10868:2017 Nanotechnologies – Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
- ISO 10878:2013 Non-destructive testing – Infrared thermography – Vocabulary
- ISO/IEC 10885:1993 Information technology – 356 mm optical disk cartridge for information interchange – Write once
- ISO/IEC 10918 Information technology – Digital compression and coding of continuous-tone still images
- ISO/TR 10929:2012 Nanotechnologies – Characterization of multiwall carbon nanotube (MWCNT) samples
- ISO 10934 Optics and optical instruments – Vocabulary for microscopy
- ISO 10934-1:2002 Part 1: Light microscopy
- ISO 10934-2:2007 Part 2: Advanced techniques in light microscopy
- ISO 10936 Optics and photonics – Operation microscopes
- ISO 10936-1:2017 Part 1: Requirements and test methods
- ISO 10936-2:2010 Part 2: Light hazard from operation microscopes used in ocular surgery
- ISO 10938:2016 Ophthalmic optics – Chart displays for visual acuity measurement – Printed, projected and electronic
- ISO 10939:2017 Ophthalmic instruments – Slit-lamp microscopes
- ISO 10940:2009 Ophthalmic instruments – Fundus cameras
- ISO 10942:2006 Ophthalmic instruments – Direct ophthalmoscopes
- ISO 10943:2011 Ophthalmic instruments – Indirect ophthalmoscopes
- ISO 10944:2009 Ophthalmic instruments – Synoptophores
- ISO 10957:2009 Information and documentation – International standard music number (ISMN)
- ISO 10962:2015 Securities and related financial instruments – Classification of financial instruments (CFI code)
- ISO/IEC 10967 Information technology – Language independent arithmetic
- ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
- ISO 10985:2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials – Requirements and test methods
- ISO 10991:2009 Micro process engineering – Vocabulary
- ISO/TR 10992:2011 Intelligent transport systems – Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
- ISO 10993 Biological evaluation of medical devices
- ISO/IEC 10994:1992 Information technology – Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side – ISO Type 303
- ISO/IEC 10995:2011 Information technology – Digitally recorded media for information interchange and storage – Test method for the estimation of the archival lifetime of optical media
- ISO 11000 – ISO 11999
- [edit]
- ISO/IEC 11002:2008 Information technology – Multipath management API
- ISO 11005:2010 Technical product documentation – Use of main documents
- ISO 11011:2013 Compressed air – Energy efficiency – Assessment[3]
- ISO 11014:2009 Safety data sheet for chemical products – Content and order of sections
- ISO/IEC TR 11017:1998 Information technology – Framework for internationalization
- ISO 11040 Prefilled syringes
- ISO 11040-1:2015 Part 1: Glass cylinders for dental local anaesthetic cartridges
- ISO 11040-2:2011 Part 2: Plunger stoppers for dental local anaesthetic cartridges
- ISO 11040-3:2012 Part 3: Seals for dental local anaesthetic cartridges
- ISO 11040-4:2015 Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
- ISO 11040-5:2012 Part 5: Plunger stoppers for injectables
- ISO 11040-6:2012 Part 6: Plastic barrels for injectables
- ISO 11040-7:2015 Part 7: Packaging systems for sterilized subassembled syringes ready for filling
- ISO 11040-8:2016 Part 8: Requirements and test methods for finished prefilled syringes
- ISO 11064 Ergonomic design of control centres
- ISO 11064-1:2000 Principles for the design of control centres
- ISO 11064-2:2000 Principles for the arrangement of control suites
- ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
- ISO 11064-4:2013 Layout and dimensions of workstations
- ISO 11064-5:2008 Displays and controls
- ISO 11064-6:2005 Environmental requirements for control centres
- ISO 11064-7:2006 Principles for the evaluation of control centres
- ISO/TR 11065:1992 Industrial automation glossary
- ISO 11067:2015 Intelligent transport systems – Curve speed warning systems (CSWS) – Performance requirements and test procedures
- ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires
- ISO/IEC 11072:1992 Information technology – Computer graphics – Computer Graphics Reference Model
- ISO/IEEE 11073 Health informatics – Point-of-care medical device communication
- ISO 11074:2015 Soil quality – Vocabulary
- ISO 11086:1996 Gas turbines – Vocabulary
- ISO 11091:1994 Construction drawings – Landscape drawing practice
- ISO 11095:1996 Linear calibration using reference materials
- ISO 11107:2009 Recreational diving services – Requirements for training programmes on enriched air nitrox (EAN) diving
- ISO 11108:1996 Information and documentation – Archival paper – Requirements for permanence and durability
- ISO 11117:2008 Gas cylinders – Valve protection caps and valve guards – Design, construction and tests
- ISO 11120 Gas cylinders – Refillable seamless steel tubes of water capacity between 150 L and 3000 L – Design, construction and testing
- ISO 11121:2017 Recreational diving services – Requirements for introductory programmes to scuba diving
- ISO 11124 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives
- ISO 11124-1:1993 Part 1: General introduction and classification
- ISO 11124-2:1993 Part 2: Chilled-iron grit
- ISO 11124-3:1993 Part 3: High-carbon cast-steel shot and grit
- ISO 11124-4:1993 Part 4: Low-carbon cast-steel shot
- ISO 11125 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives
- ISO 11125-1:1993 Part 1: Sampling
- ISO 11125-2:1993 Part 2: Determination of particle size distribution
- ISO 11125-3:1993 Part 3: Determination of hardness
- ISO 11125-4:1993 Part 4: Determination of apparent density
- ISO 11125-5:1993 Part 5: Determination of percentage defective particles and of microstructure
- ISO 11125-6:1993 Part 6: Determination of foreign matter
- ISO 11125-7:1993 Part 7: Determination of moisture
- ISO 11126 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives
- ISO 11126-1:1993 Part 1: General introduction and classification
- ISO 11126-3:1993 Part 3: Copper refinery slag
- ISO 11126-4:1993 Part 4: Coal furnace slag
- ISO 11126-5:1993 Part 5: Nickel refinery slag
- ISO 11126-6:1993 Part 6: Iron furnace slag
- ISO 11126-7:1995 Part 7: Fused aluminium oxide
- ISO 11126-8:1993 Part 8: Olivine sand
- ISO 11126-9:1999 Part 9: Staurolite
- ISO 11126-10:2000 Part 10: Almandite garnet
- ISO 11127 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives
- ISO 11127-1:2011 Part 1: Sampling
- ISO 11127-2:2011 Part 2: Determination of particle size distribution
- ISO 11127-3:2011 Part 3: Determination of apparent density
- ISO 11127-4:2011 Part 4: Assessment of hardness by a glass slide test
- ISO 11127-5:2011 Part 5: Determination of moisture
- ISO 11127-6:2011 Part 6: Determination of water-soluble contaminants by conductivity measurement
- ISO 11127-7:2011 Part 7: Determination of water-soluble chlorides
- ISO 11133:2014 Microbiology of food, animal feed and water – Preparation, production, storage and performance testing of culture media
- ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices
- ISO 11137 Sterilization of health care products – Radiation
- ISO 11138 Sterilization of health care products – Biological indicators
- ISO 11138-1:2017 Part 1: General requirements
- ISO 11138-2:2017 Part 2: Biological indicators for ethylene oxide sterilization processes
- ISO 11138-3:2017 Part 3: Biological indicators for moist heat sterilization processes
- ISO 11138-4:2017 Part 4: Biological indicators for dry heat sterilization processes
- ISO 11138-5:2017 Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
- ISO/TS 11139:2006 Sterilization of health care products – Vocabulary
- ISO 11145:2016 Optics and photonics – Lasers and laser-related equipment – Vocabulary and symbols
- ISO 11146 Lasers and laser-related equipment – Test methods for laser beam widths, divergence angles and beam propagation ratios
- ISO 11146-1:2005 Part 1: Stigmatic and simple astigmatic beams
- ISO 11146-2:2005 Part 2: General astigmatic beams
- ISO/TR 11146-3:2004 Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
- ISO 11151 Lasers and laser-related equipment – Standard optical components
- ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges
- ISO 11151-2:2015 Part 2: Components for the infrared spectral range
- ISO 11156:2011 Packaging – Accessible design – General requirements
- ISO/IEC 11160 Information technology – Office equipment – Minimum information to be included in specification sheets – Printers
- ISO/IEC 11160-1:1996 Part 1: Class 1 and Class 2 printers
- ISO/IEC 11160-2:2013 Part 2: Class 3 and Class 4 printers
- ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
- ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
- ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
- ISO/IEC 11179 Information technology – Metadata registries (MDR)
- ISO 11192:2005 Small craft – Graphical symbols
- ISO 11195:1995 Gas mixers for medical use – Stand-alone gas mixers
- ISO 11197:2016 Medical supply units
- ISO 11200:2014 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
- ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
- ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
- ISO 11203:1995 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
- ISO 11204:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
- ISO 11205:2003 Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
- ISO/TR 11219:2012 Information and documentation – Qualitative conditions and basic statistics for library buildings – Space, function and design
- ISO 11224:2003 Textiles – Web formation and bonding in nonwovens – Vocabulary
- ISO 11238:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on substances
- ISO 11239:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
- ISO 11240:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of units of measurement
- ISO/TS 11251:2010 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
- ISO 11252:2013 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation
- ISO 11270:2014 Intelligent transport systems – Lane keeping assistance systems (LKAS) – Performance requirements and test procedures
- ISO 11290 Microbiology of the food chain – Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.
- ISO 11290-1:2017 Part 1: Detection method
- ISO 11290-2:2017 Part 2: Enumeration method
- ISO/TS 11308:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- ISO 11318:2002 Cardiac defibrillators – Connector assembly DF-1 for implantable defibrillators – Dimensions and test requirements
- ISO/IEC 11319:1993 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording
- ISO/IEC 11321:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT format
- ISO 11323:2010 Iron ore and direct reduced iron – Vocabulary
- ISO/TR 11328:1994 Measurement of liquid flow in open channels – Equipment for the measurement of discharge under ice conditions
- ISO 11329:2001 Hydrometric determinations – Measurement of suspended sediment transport in tidal channels
- ISO 11357 Plastics – Differential scanning calorimetry (DSC)
- ISO 11357-1:2009 General principles
- ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
- ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
- ISO 11357-4:2005 Determination of specific heat capacity
- ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
- ISO 11357-7:2002 Determination of crystallization kinetics
- ISO/TR 11360:2010 Nanotechnologies – Methodology for the classification and categorization of nanomaterials
- ISO 11375:1998 Building construction machinery and equipment – Terms and definitions
- ISO 11380:1994 Optics and optical instruments – Ophthalmic optics – Formers
- ISO 11381:2016 Ophthalmic optics – Spectacle frames – Screw threads
- ISO 11400:1992 Nickel, ferronickel and nickel alloys – Determination of phosphorus content – Phosphovanadomolybdate molecular absorption spectrometric method
- ISO/IEC 11404:2007 Information technology – General-Purpose Datatypes (GPD)
- ISO/IEC 11411:1995 Information technology – Representation for human communication of state transition of software
- ISO 11418 Containers and accessories for pharmaceutical preparations
- ISO 11418-1:2016 Part 1: Drop-dispensing glass bottles
- ISO 11418-2:2016 Part 2: Screw-neck glass bottles for syrups
- ISO 11418-3:2016 Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
- ISO 11418-5:2015 Part 5: Dropper assemblies
- ISO 11418-7:2016 Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
- ISO 11421:1997 Optics and optical instruments – Accuracy of optical transfer function (OTF) measurement
- ISO 11442:2006 Technical product documentation – Document management
- ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
- ISO 11450:1999 Equipment for harvesting and conservation – Round balers – Terminology and commercial specifications
- ISO 11451 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
- ISO 11451-1:2015 Part 1: General principles and terminology
- ISO 11451-2:2015 Part 2: Off-vehicle radiation sources
- ISO 11451-3:2015 Part 3: On-board transmitter simulation
- ISO 11451-4:2013 Part 4: Bulk current injection (BCI)
- ISO 11452 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- ISO 11452-1:2015 Part 1: General principles and terminology
- ISO 11452-2:2004 Part 2: Absorber-lined shielded enclosure
- ISO 11452-3:2016 Part 3: Transverse electromagnetic (TEM) cell
- ISO 11452-4:2011 Part 4: Harness excitation methods
- ISO 11452-5:2002 Part 5: Stripline
- ISO 11452-7:2003 Part 7: Direct radio frequency (RF) power injection
- ISO 11452-8:2015 Part 8: Immunity to magnetic fields
- ISO 11452-9:2012 Part 9: Portable transmitters
- ISO 11452-10:2009 Part 10: Immunity to conducted disturbances in the extended audio frequency range
- ISO 11452-11:2010 Part 11: Reverberation chamber
- ISO 11453:1996 Statistical interpretation of data – Tests and confidence intervals relating to proportions
- ISO/IEC 11458:1993 Information technology – Microprocessor systems – VICbus – Inter-crate cable bus
- ISO 11462 Guidelines for implementation of statistical process control (SPC)
- ISO 11462-1:2001 Part 1: Elements of SPC
- ISO 11462-2:2010 Part 2: Catalogue of tools and techniques
- ISO 11469:2000 Plastics – Generic identification and marking of plastics products
- ISO 11484:2009 Steel products – Employer’s qualification system for non-destructive testing (NDT) personnel
- ISO 11485 Glass in building – Curved glass
- ISO 11485-1:2011 Part 1: Terminology and definitions
- ISO/TR 11487:2008 Health informatics – Clinical stakeholder participation in the work of ISO TC 215
- ISO 11491:2017 Implants for surgery – Determination of impact resistance of ceramic femoral heads for hip joint prostheses
- ISO 11499:2014 Dentistry – Single-use cartridges for local anaesthetics
- ISO/IEC 11518 Information technology – High-Performance Parallel Interface
- ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
- ISO/IEC 11518-2:2000 Part 2: Framing Protocol (HIPPI-FP)
- ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
- ISO/IEC 11518-6:2000 Part 6: Physical Switch Control (HIPPI-SC)
- ISO/IEC 11518-9:1999 Part 9: Serial specification (HIPPI-Serial)
- ISO/IEC 11518-10:2001 Part 10: 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
- ISO 11532:2012 Aircraft ground equipment – Graphical symbols
- ISO/IEC 11544:1993 Information technology – Coded representation of picture and audio information – Progressive bi-level image compression
- ISO 11546 Acoustics – Determination of sound insulation performances of enclosures
- ISO 11546-1:1995 Part 1: Measurements under laboratory conditions (for declaration purposes)
- ISO 11546-2:1995 Part 2: Measurements in situ (for acceptance and verification purposes)
- ISO/TR 11548 Communication aids for blind persons – Identifiers, names and assignation to coded character sets for 8-dot Braille characters
- ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks
- ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets
- ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for absorptance of optical laser components
- ISO 11553 Safety of machinery – Laser processing machines
- ISO 11553-1:2005 Part 1: General safety requirements
- ISO 11553-2:2007 Part 2: Safety requirements for hand-held laser processing devices
- ISO 11553-3:2013 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
- ISO 11554:2017 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics
- ISO/IEC 11557:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-DC format using 60 m and 90 m length tapes
- ISO/IEC 11558:1992 Information technology – Data compression for information interchange – Adaptive coding with embedded dictionary – DCLZ Algorithm
- ISO/IEC 11559:1993 Information technology – Data interchange on 12,7 mm wide 18-track magnetic tape cartridges – Extended format
- ISO/IEC 11560:1992 Information technology – Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
- ISO 11568 Financial services – Key management (retail)[Note 4]
- ISO 11568-1:2005 Part 1: Principles
- ISO 11568-2:2012 Part 2: Symmetric ciphers, their key management and life cycle
- ISO 11568-4:2007 Part 4: Asymmetric cryptosystems – Key management and life cycle
- ISO/IEC 11569:1993 Information technology – Telecommunications and information exchange between systems – 26-pole interface connector mateability dimensions and contact number assignments
- ISO/IEC 11570:1992 Information technology – Telecommunications and information exchange between systems – Open Systems Interconnection – Transport protocol identification mechanism
- ISO/IEC 11571:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Networks – Addressing
- ISO/IEC 11572:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit mode bearer services – Inter-exchange signalling procedures and protocol
- ISO/IEC 11573:1994 Information technology – Telecommunications and information exchange between systems – Synchronization methods and technical requirements for Private Integrated Services Networks
- ISO/IEC 11574:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode 64 kbit/s bearer services – Service description, functional capabilities and information flows
- ISO/IEC 11575:1995 Information technology – Telecommunications and information exchange between systems – Protocol mappings for the OSI Data Link service
- ISO/IEC 11576:1994 Information technology – Procedure for the registration of algorithms for the lossless compression of data
- ISO/IEC 11577:1995 Information technology – Open Systems Interconnection – Network layer security protocol
- ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC)
- ISO/IEC 11579 Information technology – Telecommunications and information exchange between systems – Private integrated services network
- ISO/IEC 11579-1:1994 Part 1: Reference configuration for PISN Exchanges (PINX)
- ISO/IEC 11579-2:1999 Part 2: Reference configuration for HS-PISN Exchanges (HS-PINX)
- ISO/IEC 11579-3:1999 Part 3: Reference configuration for PINX extension lines
- ISO/IEC TR 11580:2007 Information technology – Framework for describing user interface objects, actions and attributes
- ISO/IEC 11581 Information technology – User interface icons[Note 4]
- ISO/IEC 11581-1:2000 Part 1: Icons – General
- ISO/IEC TR 11581-1:2011 Part 1: Introduction to and overview of icon standards
- ISO/IEC 11581-2:2000 Part 2: Object icons
- ISO/IEC 11581-3:2000 Part 3: Pointer icons
- ISO/IEC 11581-5:2004 Part 5: Tool icons
- ISO/IEC 11581-6:1999 Part 6: Action icons
- ISO/IEC 11581-10:2010 Part 10: Framework and general guidance
- ISO/IEC 11581-40:2011 Part 40: Management of icon registration
- ISO/IEC TS 11581-41:2014 Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database
- ISO/IEC 11582:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Generic functional protocol for the support of supplementary services – Inter-exchange signalling procedures and protocol
- ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
- ISO/IEC 11584:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode multi-rate bearer services – Service description, functional capabilities and information flows
- ISO/IEC 11586 Information technology – Open Systems Interconnection – Generic upper layers security
- ISO/IEC 11586-1:1996 Overview, models and notation
- ISO/IEC 11586-2:1996 Security Exchange Service Element (SESE) service definition
- ISO/IEC 11586-3:1996 Security Exchange Service Element (SESE) protocol specification
- ISO/IEC 11586-4:1996 Protecting transfer syntax specification
- ISO/IEC 11586-5:1997 Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 11586-6:1997 Protecting transfer syntax Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 11587:1996 Information technology – Open Systems Interconnection – Application Context for Systems Management with Transaction Processing
- ISO 11593:1996 Manipulating industrial robots – Automatic end effector exchange systems – Vocabulary and presentation of characteristics
- ISO 11607:2006 Packaging for Terminally Sterilized Medical Devices
- ISO 11608 Needle-based injection systems for medical use – Requirements and test methods[Note 4]
- ISO 11608-1:2014 Part 1: Needle-based injection systems
- ISO 11608-2:2012 Part 2: Needles
- ISO 11608-3:2012 Part 3: Finished containers
- ISO 11608-4:2006 Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
- ISO 11608-5:2012 Part 5: Automated functions
- ISO 11608-7:2016 Part 7: Accessibility for persons with visual impairment
- ISO 11609:2017 Dentistry – Dentifrices – Requirements, test methods and marking
- ISO/TR 11610:2004 Protective clothing – Vocabulary
- ISO 11612 Protective clothing – Protection against brief contact with heat and flame. The heat can be convective, radiant, molten material, or a combination thereof.
- ISO 11615:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated medicinal product information
- ISO 11616:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
- ISO 11620:2014 Information and documentation – Library performance indicators
- ISO 11631:1998 Measurement of fluid flow – Methods of specifying flowmeter performance
- ISO/TR 11633 Health informatics – Information security management for remote maintenance of medical devices and medical information systems
- ISO/TR 11633-1:2009 Part 1: Requirements and risk analysis
- ISO/TR 11633-2:2009 Part 2: Implementation of an information security management system (ISMS)
- ISO/TR 11636:2009 Health Informatics – Dynamic on-demand virtual private network for health information infrastructure
- ISO 11648 Statistical aspects of sampling from bulk materials
- ISO 11648-1:2003 Part 1: General principles
- ISO 11648-2:2001 Part 2: Sampling of particulate materials
- ISO 11649:2009 Financial services – Core banking – Structured creditor reference to remittance information
- ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models
- ISO 11655:1995 Measurement of liquid flow in open channels – Method of specifying performance of hydrometric equipment
- ISO 11657:2014 Hydrometry – Suspended sediment in streams and canals – Determination of concentration by surrogate techniques
- ISO 11658:2012 Cardiovascular implants and extracorporeal systems – Blood/tissue contact surface modifications for extracorporeal perfusion systems
- ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
- ISO 11664 Colorimetry
- ISO 11664-1:2007 Part 1: CIE standard colorimetric observers
- ISO 11664-2:2007 Part 2: CIE standard illuminants
- ISO 11664-3:2012 Part 3: CIE tristimulus values
- ISO 11664-4:2008 Part 4: CIE 1976 L*a*b* Colour space
- ISO/CIE 11664-5:2016 Part 5: CIE 1976 L*u*v* colour space and u’, v’ uniform chromaticity scale diagram
- ISO/CIE 11664-6:2014 Part 6: CIEDE2000 Colour-difference formula
- ISO 11665 Measurement of radioactivity in the environment – Air: radon-222
- ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement methods
- ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
- ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
- ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
- ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration
- ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration
- ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate
- ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings
- ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials
- ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth
- ISO/TS 11669:2012 Translation projects – General guidance
- ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability
- ISO/TS 11672:2016 Connectors for fluid power and general use – Designation and nomenclature
- ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary
- ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines – Vocabulary and symbols
- ISO 11683:1997 Packaging – Tactile warnings of danger – Requirements
- ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – Safety signs and hazard pictorials – General principles
- ISO/TR 11688 Acoustics – Recommended practice for the design of low-noise machinery and equipment
- ISO/TR 11688-1:1995 Part 1: Planning
- ISO/TR 11688-2:1998 Part 2: Introduction to the physics of low-noise design
- ISO 11689:1996 Acoustics – Procedure for the comparison of noise-emission data for machinery and equipment
- ISO/IEC 11693 Identification cards – Optical memory cards
- ISO/IEC 11693-1:2012 Part 1: General characteristics
- ISO/IEC 11693-2:2009 Part 2: Co-existence of optical memory with other machine readable technologies
- ISO/IEC 11693-3:2015 Part 3: Authentication techniques
- ISO/IEC 11694 Identification cards – Optical memory cards – Linear recording method
- ISO/IEC 11694-1:2012 Part 1: Physical characteristics
- ISO/IEC 11694-2:2012 Part 2: Dimensions and location of the accessible optical area
- ISO/IEC 11694-3:2015 Part 3: Optical properties and characteristics
- ISO/IEC 11694-4:2008 Part 4: Logical data structures
- ISO/IEC 11694-5:2014 Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
- ISO/IEC 11694-6:2014 Part 6: Use of biometrics on an optical memory card
- ISO/IEC 11695 Identification cards – Optical memory cards – Holographic recording method
- ISO/IEC 11695-1:2015 Part 1: Physical characteristics
- ISO/IEC 11695-2:2015 Part 2: Dimensions and location of accessible optical area
- ISO/IEC 11695-3:2017 Part 3: Optical properties and characteristics
- ISO 11704:2010 Water quality – Measurement of gross alpha and beta activity concentration in non-saline water – Liquid scintillation counting method
- ISO 11712:2009 Anaesthetic and respiratory equipment – Supralaryngeal airways and connectors
- ISO 11731:2017 Water quality – Enumeration of Legionella
- ISO 11737 Sterilization of medical devices – Microbiological methods
- ISO 11737-1:2006 Part 1: Determination of a population of microorganisms on products
- ISO 11737-2:2009 Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
- ISO/IEC 11756:1999 Information technology – Programming languages – M
- ISO/TR 11766:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Security considerations for lawful interception
- ISO/TR 11769:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Data retention for law enforcement
- ISO/IEC 11770 Information technology – Security techniques – Key management
- ISO/IEC 11770-1:2010 Part 1: Framework
- ISO/IEC 11770-2:2008 Part 2: Mechanisms using symmetric techniques
- ISO/IEC 11770-3:2015 Part 3: Mechanisms using asymmetric techniques
- ISO/IEC 11770-4:2006 Part 4: Mechanisms based on weak secrets
- ISO/IEC 11770-5:2011 Part 5: Group key management
- ISO/IEC 11770-6:2016 Part 6: Key derivation
- ISO/TS 11774:2011 Non-destructive testing – Performance-based qualification
- ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
- ISO 11798:1999 Information and documentation – Permanence and durability of writing, printing and copying on paper – Requirements and test methods
- ISO 11799:2015 Information and documentation – Document storage requirements for archive and library materials
- ISO 11800:1998 Information and documentation – Requirements for binding materials and methods used in the manufacture of books
- ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises[Note 4]
- ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
- ISO/IEC TR 11801-9902:2017 Part 9902: Specifications for End-to-end link configurations
- ISO/IEC TR 11801-9903:2015 Part 9903: Matrix modelling of channels and links
- ISO/IEC TR 11801-9904:2017 Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications
- ISO/IEC TR 11802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Technical reports and guidelines
- ISO/IEC TR 11802-5:1997 Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks
- ISO 11807 Integrated optics – Vocabulary
- ISO 11807-1:2001 Part 1: Basic terms and symbols
- ISO 11807-2:2001 Part 2: Terms used in classification
- ISO 11810:2015 Lasers and laser-related equipment – Test method and classification for the laser resistance of surgical drapes and/or patient protective covers – Primary ignition, penetration, flame spread and secondary ignition
- ISO/TR 11811:2012 Nanotechnologies – Guidance on methods for nano- and microtribology measurements
- ISO 11819 Acoustics – Measurement of the influence of road surfaces on traffic noise[Note 4]
- ISO 11819-1:1997 Part 1: Statistical Pass-By method
- ISO 11819-2:2017 Part 2: The close-proximity method
- ISO/TS 11819-3:2017 Part 3: Reference tyres
- ISO/PAS 11819-4:2013 Part 4: SPB method using backing board
- ISO 11821:1997 Acoustics – Measurement of the in situ sound attenuation of a removable screen
- ISO 11822:1996 Information and documentation – Extension of the Arabic alphabet coded character set for bibliographic information interchange
- ISO 11838:1997 Motorcycle and motorcycle-rider kinematics – Vocabulary
- ISO 11841 Road vehicles and internal combustion engines – Filter vocabulary
- ISO 11841-1:2000 Part 1: Definitions of filters and filter components
- ISO 11841-2:2000 Part 2: Definitions of characteristics of filters and their components
- ISO 11843 Capability of detection
- ISO 11843-1:1997 Part 1: Terms and definitions
- ISO 11843-2:2000 Part 2: Methodology in the linear calibration case
- ISO 11843-3:2003 Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
- ISO 11843-4:2003 Part 4: Methodology for comparing the minimum detectable value with a given value
- ISO 11843-5:2008 Part 5: Methodology in the linear and non-linear calibration cases
- ISO 11843-6:2013 Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
- ISO 11843-7:2012 Part 7: Methodology based on stochastic properties of instrumental noise
- ISO 11866 Milk and milk products – Enumeration of presumptive Escherichia coli
- ISO 11866-1:2005 Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG)
- ISO 11866-2:2005 Part 2: Colony-count technique at 44 degrees C using membranes
- ISO 11886:2002 Building construction machinery and equipment – Pile driving and extracting equipment – Terminology and commercial specifications
- ISO/TS 11888:2017 Nanotechnologies – Characterization of multiwall carbon nanotubes – Mesoscopic shape factors
- ISO/IEC 11889 Information technology – Trusted platform module library
- ISO/IEC 11889-1:2015 Part 1: Architecture
- ISO/IEC 11889-2:2015 Part 2: Structures
- ISO/IEC 11889-3:2015 Part 3: Commands
- ISO/IEC 11889-4:2015 Part 4: Supporting Routines
- ISO 11898 Road vehicles – Controller area network (CAN)
- ISO 11904 Acoustics – Determination of sound immission from sound sources placed close to the ear
- ISO 11904-1:2002 Part 1: Technique using a microphone in a real ear (MIRE technique)
- ISO 11904-2:2004 Part 2: Technique using a manikin
- ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation – Fundamentals and application
- ISO 11930:2012 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product
- ISO/TS 11931:2012 Nanotechnologies – Nanoscale calcium carbonate in powder form – Characteristics and measurement
- ISO/TS 11937:2012 Nanotechnologies – Nanoscale titanium dioxide in powder form – Characteristics and measurement
- ISO 11940:1998 Information and documentation – Transliteration of Thai
- ISO 11940-2:2007 Information and documentation – Transliteration of Thai characters into Latin characters – Part 2: Simplified transcription of Thai language
- ISO/TR 11941:1996 Information and documentation – Transliteration of Korean script into Latin characters [Withdrawn, no replacement]
- ISO 11957:1996 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements
- ISO/IEC 11976:2008 Information technology – Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges – Capacity: 60 Gbytes per cartridge – Second generation
- ISO 11978:2017 Ophthalmic optics – Contact lenses and contact lens care products – Labelling
- ISO 11979 Ophthalmic implants – Intraocular lenses
- ISO 11979-1:2012 Part 1: Vocabulary
- ISO 11979-2:2014 Part 2: Optical properties and test methods
- ISO 11979-3:2012 Part 3: Mechanical properties and test methods
- ISO 11979-4:2008 Part 4: Labelling and information
- ISO 11979-5:2006 Part 5: Biocompatibility
- ISO 11979-6:2014 Part 6: Shelf-life and transport stability testing
- ISO 11979-7:2014 Part 7: Clinical investigations
- ISO 11979-8:2017 Part 8: Fundamental requirements
- ISO 11979-9:2006 Part 9: Multifocal intraocular lenses
- ISO 11979-10:2006 Part 10: Phakic intraocular lenses
- ISO 11980:2012 Ophthalmic optics – Contact lenses and contact lens care products – Guidance for clinical investigations
- ISO 11981:2009 Ophthalmic optics – Contact lenses and contact lens care products – Determination of physical compatibility of contact lens care products with contact lenses
- ISO 11986:2010 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release
- ISO 11987:2012 Ophthalmic optics – Contact lenses – Determination of shelf-life
- ISO/IEC 11989:2010 Information technology – iSCSI Management API
- ISO 11990 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes
- ISO 11990-1:2011 Part 1: Tracheal tube shaft
- ISO 11990-2:2010 Part 2: Tracheal tube cuffs
- ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway
- ISO 11994:1997 Cranes – Availability – Vocabulary
- ISO 12001:1996 Acoustics – Noise emitted by machinery and equipment – Rules for the drafting and presentation of a noise test code
- ISO 12005:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Polarization
- ISO 12006 Building construction – Organization of information about construction works
- ISO 12013:2012 Paints and varnishes — Determination of curing characteristics using a free damped oscillation method —
- ISO/TS 12025:2012 Nano materials – Quantification of nano-object release from powders by generation of aerosols
- ISO/IEC 12042:1993 Information technology – Data compression for information interchange – Binary arithmetic coding algorithm
- ISO 12052:2017 Health informatics – Digital imaging and communication in medicine (DICOM) including workflow and data management
- ISO 12083:1994 Information and documentation – Electronic manuscript preparation and markup
- ISO 12085:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Motif parameters
- ISO/IEC 12087 Information technology – Computer graphics and image processing – Image Processing and Interchange (IPI) – Functional specification
- ISO/IEC 12087-1:1995 Part 1: Common architecture for imaging
- ISO/IEC 12087-2:1994 Part 2: Programmer’s imaging kernel system application programme interface
- ISO/IEC 12087-3:1995 Part 3: Image Interchange Facility (IIF)
- ISO/IEC 12087-5:1998 Part 5: Basic Image Interchange Format (BIIF)
- ISO/IEC 12088-4:1995 Information technology – Computer graphics and image processing – Image processing and interchange – Application program interface language bindings
- ISO/IEC 12089:1997 Information technology – Computer graphics and image processing – Encoding for the Image Interchange Facility (IIF)
- ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
- ISO/IEC 12139 Information technology – Telecommunications and information exchange between systems – Powerline communication (PLC) – High speed PLC medium access control (MAC) and physical layer (PHY)
- ISO/IEC 12097:2002 Road vehicles — Airbag components
- ISO/IEC 12139-1:2009 Part 1: General requirements
- ISO 12163:1999 Dental baseplate/modelling wax [Withdrawn: replaced with ISO 15854]
- ISO 12164 Hollow taper interface with flange contact surface
- ISO 12164-1:2001 Part 1: Shanks — Dimensions
- ISO 12164-2:2001 Part 2: Receivers — Dimensions
- ISO 12164-3:2014 Part 3: Dimensions of shanks for stationary tools
- ISO 12164-4:2014 Part 4: Dimensions of receivers for stationary tools
- ISO 12165:2000 Tools for moulding – Components of compression and injection moulds and diecasting dies – Terms and symbols
- ISO 12176 Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems
- ISO 12176-3:2011 Part 3: Operator’s badge
- ISO 12179:2000 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Calibration of contact (stylus) instruments
- ISO 12180 Geometrical product specifications (GPS) – Cylindricity
- ISO 12180-1:2011 Part 1: Vocabulary and parameters of cylindrical form
- ISO 12180-2:2011 Part 2: Specification operators
- ISO 12181 Geometrical product specifications (GPS) – Roundness
- ISO 12181-1:2011 Part 1: Vocabulary and parameters of roundness
- ISO 12181-2:2011 Part 2: Specification operators
- ISO/IEC TR 12182:2015 Systems and software engineering – Framework for categorization of IT systems and software, and guide for applying it
- ISO 12188 Tractors and machinery for agriculture and forestry – Test procedures for positioning and guidance systems in agriculture
- ISO 12188-1:2010 Part 1: Dynamic testing of satellite-based positioning devices
- ISO 12188-2:2012 Part 2: Testing of satellite-based auto-guidance systems during straight and level travel
- ISO 12189:2008 Implants for surgery – Mechanical testing of implantable spinal devices – Fatigue test method for spinal implant assemblies using an anterior support
- ISO 12199:2000 Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
- ISO/IEC 12207 Systems and software engineering – Software life cycle processes
- ISO 12231:2012 Photography – Electronic still picture imaging – Vocabulary
- ISO 12242:2012 Measurement of fluid flow in closed conduits – Ultrasonic transit-time meters for liquid
- ISO/IEC 12246:1993 Information technology – 8 mm wide magnetic tape cartridge dual azimuth format for information interchange – Helical scan recording
- ISO/IEC 12247:1993 Information technology – 3.81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS format using 60 m and 90 m length tapes
- ISO/IEC 12248:1993 Information technology – 3.81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT-DC format using 60 m and 90 m length tapes
- ISO/TR 12300:2014 Health informatics – Principles of mapping between terminological systems
- ISO/TR 12309:2009 Health informatics – Guidelines for terminology development organizations
- ISO/TR 12310:2015 Health informatics – Principles and guidelines for the measurement of conformance in the implementation of terminological systems
- ISO 12353 Road vehicles – Traffic accident analysis
- ISO 12353-1:2002 Part 1: Vocabulary
- ISO/IEC TR 12382:1992 Permuted index of the vocabulary of information technology
- ISO 12417 Cardiovascular implants and extracorporeal systems – Vascular device-drug combination products
- ISO 12417-1:2015 Part 1: General requirements
- ISO 12543 Glass in building – Laminated glass and laminated safety glass
- ISO 12543-1:2011 Part 1: Definitions and description of component parts
- ISO 12615:2004 Bibliographic references and source identifiers for terminology work
- ISO 12616:2002 Translation-oriented terminography
- ISO 12620:2019 Management of terminology resources — Data category specifications
- ISO 12625 Tissue paper and tissue products
- ISO 12625-1:2011 Part 1: General guidance on terms
- ISO 12637 Graphic technology – Vocabulary
- ISO 12637-1:2006 Part 1: Fundamental terms
- ISO 12637-2:2008 Part 2: Prepress terms
- ISO 12637-3:2009 Part 3: Printing terms
- ISO 12637-4:2008 Part 4: Postpress terms
- ISO 12639:2004 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
- ISO 12640 Graphic technology – Prepress digital data exchange
- ISO 12640-1:1997 Part 1: CMYK standard colour image data (CMYK/SCID)
- ISO 12640-2:2004 Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID)
- ISO 12640-3:2007 Part 3: CIELAB standard colour image data (CIELAB/SCID)
- ISO 12640-4:2011 Part 4: Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID]
- ISO 12640-5:2013 Part 5: Scene-referred standard colour image data (RIMM/SCID)
- ISO 12641:1997 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
- ISO 12641-1:2016 Part 1: Colour targets for input scanner calibration
- ISO 12642 Graphic technology – Input data for characterization of four-colour process printing
- ISO 12642-1:2011 Part 1: Initial data set
- ISO 12642-2:2006 Part 2: Expanded data set
- ISO 12651 Electronic document management – Vocabulary
- ISO 12651-1:2012 Part 1: Electronic document imaging
- ISO 12651-2:2014 Part 2: Workflow management
- ISO 12671:2012 Thermal spraying – Thermally sprayed coatings – Symbolic representation on drawings
- ISO 12706:2009 Non-destructive testing – Penetrant testing – Vocabulary
- ISO 12707:2016 Non-destructive testing – Magnetic particle testing – Vocabulary
- ISO 12716:2001 Non-destructive testing – Acoustic emission inspection – Vocabulary
- ISO 12718:2008 Non-destructive testing – Eddy current testing – Vocabulary
- ISO 12749 Nuclear energy, nuclear technologies, and radiological protection – Vocabulary
- ISO 12749-2:2013 Part 2: Radiological protection
- ISO 12749-3:2015 Part 3: Nuclear fuel cycle
- ISO 12749-4:2015 Part 4: Dosimetry for radiation processing
- ISO 12756:2016 Drawing and writing instruments – Ball point pens and roller ball pens – Vocabulary
- ISO 12757 Ball point pens and refills
- ISO 12757-2:1998 Part 2: Documentary use (DOC)
- ISO 12764:2017 Measurement of fluid flow in closed conduits – Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices – Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
- ISO/TR 12773 Business requirements for health summary records
- ISO/TR 12773-1:2009 Part 1: Requirements
- ISO/TR 12773-2:2009 Part 2: Environmental scan
- ISO 12780 Geometrical product specifications (GPS) – Straightness
- ISO 12780-1:2011 Part 1: Vocabulary and parameters of straightness
- ISO 12780-2:2011 Part 2: Specification operators
- ISO 12781 Geometrical product specifications (GPS) – Flatness
- ISO 12781-1:2011 Part 1: Vocabulary and parameters of flatness
- ISO 12781-2:2011 Part 2: Specification operators
- ISO/IEC 12785 Information technology – Learning, education, and training – Content packaging
- ISO/IEC 12785-1:2009 Part 1: Information model
- ISO/IEC 12785-2:2011 Part 2: XML binding
- ISO/IEC TR 12785-3:2012 Part 3: Best practice and implementation guide
- ISO 12789 Reference radiation fields – Simulated workplace neutron fields
- ISO 12789-1:2008 Part 1: Characteristics and methods of production
- ISO 12789-2:2008 Part 2: Calibration fundamentals related to the basic quantities
- ISO/TR 12802:2010 Nanotechnologies – Model taxonomic framework for use in developing vocabularies – Core concepts
- ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
- ISO 12812 Core banking – Mobile financial services
- ISO 12812-1:2017 Part 1: General framework
- ISO/TS 12812-2:2017 Part 2: Security and data protection for mobile financial services
- ISO/TS 12812-3:2017 Part 3: Financial application lifecycle management
- ISO/TS 12812-4:2017 Part 4: Mobile payments-to-persons
- ISO/TS 12812-5:2017 Part 5: Mobile payments to businesses
- ISO 12813:2015 Electronic fee collection – Compliance check communication for autonomous systems
- ISO 12836:2015 Dentistry – Digitizing devices for CAD/CAM systems for indirect dental restorations – Test methods for assessing accuracy
- ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments
- ISO 12855:2015 Electronic fee collection – Information exchange between service provision and toll charging
- ISO 12858 Optics and optical instruments – Ancillary devices for geodetic instruments
- ISO 12858-1:2014 Part 1: Invar levelling staffs
- ISO 12858-2:1999 Part 2: Tripods
- ISO 12858-3:2005 Part 3: Tribrachs
- ISO/TR 12859:2009 Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
- ISO/IEC TR 12860:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – General
- ISO/IEC TR 12861:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Identification and routing
- ISO/IEC 12862:2011 Information technology – 120 mm (8.54 GB per side) and 80 mm (2.66 GB per side) DVD recordable disk for dual layer (DVD-R for DL)
- ISO 12865:2006 Ophthalmic instruments – Retinoscopes
- ISO 12866:1999 Ophthalmic instruments – Perimeters
- ISO 12867:2010 Ophthalmic instruments – Trial frames
- ISO/TS 12869:2012 Water quality – Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR)
- ISO 12870:2016 Ophthalmic optics – Spectacle frames – Requirements and test methods
- ISO/TR 12885:2008 Nanotechnologies – Health and safety practices in occupational settings relevant to nanotechnologies
- ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
- ISO 12891 Retrieval and analysis of surgical implants
- ISO 12891-1:2015 Part 1: Retrieval and handling
- ISO 12891-2:2014 Part 2: Analysis of retrieved surgical implants
- ISO/TS 12901 Nanotechnologies – Occupational risk management applied to engineered nanomaterials
- ISO/TS 12901-1:2012 Part 1: Principles and approaches
- ISO/TS 12901-2:2014 Part 2: Use of the control banding approach
- ISO/IEC 12905:2011 Integrated circuit cards – Enhanced terminal accessibility using cardholder preference interface
- ISO 12912:2014 Circular knitting machines – Vocabulary
- ISO 12913 Acoustics – Soundscape
- ISO 12913-1:2014 Part 1: Definition and conceptual framework
- ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods
- ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
- ISO 12967 Health informatics – Service architecture
- ISO 12967-1:2009 Part 1: Enterprise viewpoint
- ISO 12967-2:2009 Part 2: Information viewpoint
- ISO 12967-3:2009 Part 3: Computational viewpoint
- ISO 12999 Acoustics – Determination and application of measurement uncertainties in building acoustics
- ISO 12999-1:2014 Part 1: Sound insulation
- ISO 13000 – ISO 13999
- [edit]
- ISO 13006:2012 Ceramic tiles – Definitions, classification, characteristics and marking
- ISO 13007 Ceramic tiles – Grouts and adhesives
- ISO 13007-1:2014 Terms, definitions and specifications for adhesives
- ISO 13007-2:2010 Test methods for adhesives
- ISO 13007-3:2010 Terms, definitions and specifications for grouts
- ISO 13007-4:2013 Test methods for grouts
- ISO 13008:2012 Information and documentation – Digital records conversion and migration process
- ISO 13009:2015 Tourism and related services – Requirements and recommendations for beach operation
- ISO/TR 13014:2012 Nanotechnologies – Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
- ISO/TR 13028:2010 Information and documentation – Implementation guidelines for digitization of records
- ISO 13053 Quantitative methods in process improvement – Lean and Six Sigma
- ISO 13053-1:2011 Part 1: DMAIC methodology
- ISO 13053-2:2011 Part 2: Tools and techniques
- ISO/TR 13054:2012 Knowledge management of health information standards
- ISO/TR 13062:2015 Electric mopeds and motorcycles – Terminology and classification
- ISO/IEC 13066 Information technology – Interoperability with assistive technology (AT)
- ISO/IEC 13066-1:2011 Part 1: Requirements and recommendations for interoperability
- ISO/IEC TR 13066-2:2016 Part 2: Windows accessibility application programming interface (API)
- ISO/IEC TR 13066-3:2012 Part 3: IAccessible2 accessibility application programming interface (API)
- ISO/IEC TR 13066-4:2015 Part 4: Linux/UNIX graphical environments accessibility API
- ISO/IEC TR 13066-6:2014 Part 6: Java accessibility application programming interface (API)
- ISO 13078 Dentistry – Dental furnace
- ISO 13078-2:2016 Part 2: Test method for evaluation of furnace programme via firing glaze
- ISO 13102:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment: Electronic digital-indicator gauge – Design and metrological characteristics
- ISO 13105 Building construction machinery and equipment – Machinery for concrete surface floating and finishing
- ISO 13105-1:2014 Part 1: Terms and commercial specifications
- ISO 13111 Intelligent transport systems (ITS) – The use of personal ITS station to support ITS service provision for travellers
- ISO 13111-1:2017 Part 1: General information and use case definitions
- ISO 13119:2012 Health informatics – Clinical knowledge resources – Metadata
- ISO 13120:2013 Health informatics – Syntax to represent the content of healthcare classification systems – Classification Markup Language (ClaML)
- ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
- ISO 13127:2012 Packaging – Child resistant packaging – Mechanical test methods for reclosable child resistant packaging systems
- ISO/TR 13128:2012 Health Informatics – Clinical document registry federation
- ISO/TS 13131:2014 Health informatics – Telehealth services – Quality planning guidelines
- ISO/TS 13136:2012 Microbiology of food and animal feed – Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens – Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups
- ISO 13140 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 13141
- ISO 13140-1:2016 Part 1: Test suite structure and test purposes
- ISO 13140-2:2016 Part 2: Abstract test suite
- ISO 13141:2015 Electronic fee collection – Localisation augmentation communication for autonomous systems
- ISO 13142:2015 Electro-optical systems – Cavity ring-down technique for high-reflectance measurement
- ISO 13143 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 12813
- ISO 13143-1:2016 Part 1: Test suite structure and test purposes
- ISO 13143-2:2016 Part 2: Abstract test suite
- ISO/TR 13154:2017 Medical electrical equipment – Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph
- ISO/IEC 13156:2011 Information technology – Telecommunications and information exchange between systems – High rate 60 GHz PHY, MAC and PALs
- ISO/IEC 13157 Information technology – Telecommunications and information exchange between systems – NFC Security
- ISO/IEC 13157-1:2014 Part 1: NFC-SEC NFCIP-1 security services and protocol
- ISO/IEC 13157-2:2016 Part 2: NFC-SEC cryptography standard using ECDH and AES
- ISO/IEC 13157-3:2016 Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM
- ISO/IEC 13157-4:2016 Part 4: NFC-SEC entity authentication and key agreement using asymmetric cryptography
- ISO/IEC 13157-5:2016 Part 5: NFC-SEC entity authentication and key agreement using symmetric cryptography
- ISO 13160:2012 Water quality – Strontium 90 and strontium 89 – Test methods using liquid scintillation counting or proportional counting
- ISO 13161:2011 Water quality – Measurement of polonium 210 activity concentration in water by alpha spectrometry
- ISO 13162:2011 Water quality – Determination of carbon 14 activity – Liquid scintillation counting method
- ISO 13163:2013 Water quality – Lead-210 – Test method using liquid scintillation counting
- ISO 13164 Water quality – Radon-222
- ISO 13164-1:2013 Part 1: General principles
- ISO 13164-2:2013 Part 2: Test method using gamma-ray spectrometry
- ISO 13164-3:2013 Part 3: Test method using emanometry
- ISO 13164-4:2015 Part 4: Test method using two-phase liquid scintillation counting
- ISO 13165 Water quality – Radium-226
- ISO 13165-1:2013 Part 1: Test method using liquid scintillation counting
- ISO 13165-2:2014 Part 2: Test method using emanometry
- ISO 13165-3:2016 Part 3: Test method using coprecipitation and gamma-spectrometry
- ISO 13167:2015 Water quality – Plutonium, americium, curium and neptunium – Test method using alpha spectrometry
- ISO/IEC 13170:2009 Information technology – 120 mm (8.54 GB per side) and 80 mm (2.66 GB per side) DVD re-recordable disk for dual layer (DVD-RW for DL)
- ISO 13175 Implants for surgery – Calcium phosphates
- ISO 13175-3:2012 Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
- ISO 13179 Implants for surgery – Plasma-sprayed unalloyed titanium coatings on metallic surgical implants
- ISO 13179-1:2014 Part 1: General requirements
- ISO 13183:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – Using broadcast communications
- ISO 13184 Intelligent transport systems (ITS) – Guidance protocol via personal ITS station for advisory safety systems
- ISO/TR 13184-1:2013 Part 1: General information and use case definitions
- ISO 13184-2:2016 Part 2: Road guidance protocol (RGP) requirements and specification
- ISO 13185 Intelligent transport systems – Vehicle interface for provisioning and support of ITS services
- ISO/TR 13185-1:2012 Part 1: General information and use case definition
- ISO 13185-2:2015 Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface
- ISO/IEC 13187:2011 Information technology – Server management command line protocol (SM CLP) specification
- ISO/TR 13195:2015 Selected illustrations of response surface method – Central composite design
- ISO 13200:1995 Cranes – Safety signs and hazard pictorials – General principles
- ISO 13203:2005 Chains, sprockets and accessories – List of equivalent terms
- ISO/IEC 13210:1999 Information technology – Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards
- ISO/IEC 13211 Information technology – Programming languages – Prolog
- ISO/IEC 13211-1:1995 Part 1: General core
- ISO/IEC 13211-2:2000 Part 2: Modules
- ISO 13212:2014 Ophthalmic optics – Contact lens care products – Guidelines for determination of shelf-life
- ISO/IEC 13213:1994 Information technology – Microprocessor systems – Control and Status Registers (CSR) Architecture for microcomputer buses
- ISO 13225:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment; Height gauges – Design and metrological characteristics
- ISO/IEC TR 13233:1995 Information technology – Interpretation of accreditation requirements in ISO/IEC Guide 25 – Accreditation of Information Technology and Telecommunications testing laboratories for software and protocol testing services
- ISO/IEC 13235 Information technology – Open Distributed Processing – Trading function
- ISO/IEC 13235-1:1998 Specification
- ISO/IEC 13235-3:1998 Part 3: Provision of Trading Function using OSI Directory service
- ISO/IEC 13236:1998 Information technology – Quality of service: Framework
- ISO/IEC 13238 Information technology – Data Management
- ISO/IEC 13238-3:1998 Part 3: IRDS export/import facility
- ISO/IEC 13239:2002 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
- ISO/IEC 13240:2001 Information technology – Document description and processing languages – Interchange Standard for Multimedia Interactive Documents (ISMID)
- ISO/IEC 13241:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Route Restriction Class additional network feature
- ISO/IEC 13242:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Route Restriction Class additional network feature
- ISO/IEC 13244:1998 Information technology – Open Distributed Management Architecture
- ISO/IEC 13246:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Signalling ATM adaptation layer
- ISO/IEC 13247:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Basic call/connection control
- ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
- ISO/IEC 13249-1:2016 Part 1: Framework
- ISO/IEC 13249-2:2003 Part 2: Full-Text
- ISO/IEC 13249-3:2016 Part 3: Spatial
- ISO/IEC 13249-5:2003 Part 5: Still image
- ISO/IEC 13249-6:2006 Part 6: Data mining
- ISO/IEC TS 13249-7:2013 Part 7: History
- ISO/IEC 13250 Information technology – Topic Maps[Note 3]
- ISO/IEC 13251:2004 Collection of graphical symbols for office equipment
- ISO/IEC 13252:1999 Information technology – Enhanced communications transport service definition
- ISO 13261 Sound power rating of air-conditioning and air source heat pump equipment
- ISO 13261-1:1998 Part 1: Non-ducted outdoor equipment
- ISO 13261-2:1998 Part 2: Non-ducted indoor equipment
- ISO 13274:2013 Packaging – Transport packaging for dangerous goods – Plastics compatibility testing for packaging and IBCs
- ISO/TS 13278:2011 Nanotechnologies – Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- ISO 13289:2011 Recreational diving services – Requirements for the conduct of snorkelling excursions
- ISO 13293:2012 Recreational diving services – Requirements for gas blender training programmes
- ISO 13300 Sensory analysis – General guidance for the staff of a sensory evaluation laboratory
- ISO 13300-1:2006 Part 1: Staff responsibilities
- ISO 13300-2:2006 Part 2: Recruitment and training of panel leaders
- ISO 13304 Radiological protection – Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation
- ISO 13304-1:2013 Part 1: General principles
- ISO 13307:2013 Microbiology of food and animal feed – Primary production stage – Sampling techniques
- ISO 13320:2009 Particle size analysis – Laser diffraction methods
- ISO 13325:2003 Tyres – Coast-by methods for measurement of tyre-to-road sound emission
- ISO/TR 13329:2012 Nanomaterials – Preparation of material safety data sheet (MSDS)
- ISO 13332:2000 Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
- ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
- ISO/IEC 13346-1:1995 Part 1: General
- ISO/IEC 13346-2:1999 Part 2: Volume and boot block recognition
- ISO/IEC 13346-3:1999 Part 3: Volume structure
- ISO/IEC 13346-4:1999 Part 4: File structure
- ISO/IEC 13346-5:1995 Part 5: Record structure
- ISO 13347 Industrial fans – Determination of fan sound power levels under standardized laboratory conditions
- ISO 13347-1:2004 Part 1: General overview
- ISO 13347-2:2004 Part 2: Reverberant room method
- ISO 13347-3:2004 Part 3: Enveloping surface methods
- ISO 13347-4:2004 Part 4: Sound intensity method
- ISO 13349:2010 Fans – Vocabulary and definitions of categories
- ISO 13356:2015 Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
- ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
- ISO 13372:2012 Condition monitoring and diagnostics of machines – Vocabulary
- ISO 13373 Condition monitoring and diagnostics of machines – Vibration condition monitoring
- ISO 13373-1:2002 Part 1: General procedures
- ISO 13373-2:2016 Part 2: Processing, analysis and presentation of vibration data
- ISO 13373-3:2015 Part 3: Guidelines for vibration diagnosis
- ISO 13373-7:2017 Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
- ISO 13373-9:2017 Part 9: Diagnostic techniques for electric motors
- ISO 13374 Condition monitoring and diagnostics of machine systems – Data processing, communication and presentation[Note 3]
- ISO 13374-1:2003 Part 1: General guidelines
- ISO 13374-2:2007 Part 2: Data processing
- ISO 13374-3:2012 Part 3: Communication
- ISO 13374-4:2015 Part 4: Presentation
- ISO 13379 Condition monitoring and diagnostics of machines – Data interpretation and diagnostics techniques
- ISO 13379-1:2012 Part 1: General guidelines
- ISO 13379-2:2015 Part 2: Data-driven applications
- ISO 13381 Condition monitoring and diagnostics of machines – Prognostics
- ISO 13381-1:2015 Part 1: General guidelines
- ISO 13385 Geometrical product specifications (GPS) – Dimensional measuring equipment
- ISO 13385-1:2011 Part 1: Callipers; Design and metrological characteristics
- ISO 13385-2:2011 Part 2: Calliper depth gauges; Design and metrological characteristics
- ISO 13399 Cutting tool data representation and exchange
- ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model
- ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items
- ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items
- ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items
- ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items
- ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts
- ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems
- ISO/TS 13399-70:2016 Part 70: Graphical data layout – Layer setting for tool layout
- ISO/TS 13399-71:2016 Part 71: Graphical data layout – Creation of documents for standardized data exchange: Graphical product information
- ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange – Definition of properties for drawing header and their XML-data exchange
- ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models – Overview and principles
- ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries
- ISO/TS 13399-150:2008 Part 150: Usage guidelines
- ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models – Regular inserts
- ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models – Irregular inserts
- ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models – Replaceable inserts for drilling
- ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models – Inserts for reaming
- ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
- ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
- ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models – Solid end mills
- ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models – Solid milling cutters with arbor hole
- ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models – Modular tooling systems with adjustable cartridges for boring
- ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models – End mills for indexable inserts
- ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models – Milling cutters with arbor hole for indexable inserts
- ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models – Tool holders for indexable inserts
- ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models – Turning tools with carbide tips
- ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models – Solid reamers
- ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models – Reamers for indexable inserts
- ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models – Converting, extending and reducing adaptive items
- ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models – Collets
- ISO 13402:1995 Surgical and dental hand instruments – Determination of resistance against autoclaving, corrosion and thermal exposure
- ISO/IEC 13403:1995 Information technology – Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method
- ISO 13404:2007 Prosthetics and orthotics – Categorization and description of external orthoses and orthotic components
- ISO 13405 Prosthetics and orthotics – Classification and description of prosthetic components
- ISO 13405-1:2015 Part 1: Classification of prosthetic components
- ISO 13405-2:2015 Part 2: Description of lower limb prosthetic components
- ISO 13405-3:2015 Part 3: Description of upper limb prosthetic components
- ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
- ISO 13406-2:2001 Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
- ISO 13407:1999 Human-centred design processes for interactive systems (This standard has been revised by ISO 9241-210:2010)
- ISO/IEC 13421:1993 Information technology – Data Interchange on 12.7 mm, 48-track magnetic tape cartridges – DLT 1 format
- ISO/IEC 13422:1994 Information technology – Data interchange on 90 mm Flexible Disk Cartridges 10 MB capacity using sector servo tracking – ISO Type 304
- ISO 13444:2012 Technical product documentation (TPD) – Dimensioning and indication of knurling
- ISO 13448 Acceptance sampling procedures based on the allocation of priorities principle (APP)
- ISO 13448-1:2005 Part 1: Guidelines for the APP approach
- ISO 13448-2:2004 Part 2: Coordinated single sampling plans for acceptance sampling by attributes
- ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
- ISO/TS 13471 Acoustics – Temperature influence on tyre/road noise measurement
- ISO/TS 13471-1:2017 Part 1: Correction for temperature when testing with the CPX method
- ISO 13472 Acoustics – Measurement of sound absorption properties of road surfaces in situ
- ISO 13472-1:2002 Part 1: Extended surface method
- ISO 13472-2:2010 Part 2: Spot method for reflective surfaces
- ISO 13473 Characterization of pavement texture by use of surface profiles
- ISO 13473-1:1997 Part 1: Determination of Mean Profile Depth
- ISO 13473-2:2002 Part 2: Terminology and basic requirements related to pavement texture profile analysis
- ISO 13473-3:2002 Part 3: Specification and classification of profilometers
- ISO/TS 13473-4:2008 Part 4: Spectral analysis of surface profiles
- ISO 13473-5:2009 Part 5: Determination of megatexture
- ISO 13474:2009 Acoustics – Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
- ISO 13475 Acoustics – Stationary audible warning devices used outdoors
- ISO 13475-1:1999 Part 1: Field measurements for determination of sound emission quantities
- ISO/TS 13475-2:2000 Part 2: Precision methods for determination of sound emission quantities
- ISO/IEC 13481:1993 Information technology – Data interchange on 130 mm optical disk cartridges – Capacity: 1 GB per cartridge
- ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots
- ISO 13485:2016 Medical devices – Quality management systems – Requirements for regulatory purposes
- ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
- ISO/IEC 13490-1:1995 Part 1: General
- ISO/IEC 13490-2:1995 Part 2: Volume and file structure
- ISO 13491 Financial services – Secure cryptographic devices (retail)
- ISO 13491-1:2016 Part 1: Concepts, requirements and evaluation methods
- ISO 13491-2:2017 Part 2: Security compliance checklists for devices used in financial transactions
- ISO 13492:2007 Financial services – Key management related data element – Application and usage of ISO 8583 data elements 53 and 96
- ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software
- ISO/IEC 13522 Information technology – Coding of multimedia and hypermedia information
- ISO/IEC 13522-1:1997 Part 1: MHEG object representation – Base notation (ASN.1)
- ISO/IEC 13522-3:1997 Part 3: MHEG script interchange representation
- ISO/IEC 13522-4:1996 Part 4: MHEG registration procedure
- ISO/IEC 13522-5:1997 Part 5: Support for base-level interactive applications
- ISO/IEC 13522-6:1998 Part 6: Support for enhanced interactive applications
- ISO/IEC 13522-7:2001 Part 7: Interoperability and conformance testing for ISO/IEC 13522-5
- ISO/IEC 13522-8:2001 Part 8: XML notation for ISO/IEC 13522-5
- ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
- ISO 13539:1998 Earth-moving machinery – Trenchers – Definitions and commercial specifications
- ISO/IEC 13549:1993 Information technology – Data interchange on 130 mm optical disk cartridges – Capacity: 1.3 GB per cartridge
- ISO 13550:2002 Hydrometric determinations – Flow measurements in open channels using structures – Use of vertical underflow gates and radial gates
- ISO 13559:2002 Butter, fermented milks and fresh cheese – Enumeration of contaminating microorganisms – Colony-count technique at 30 degrees C
- ISO/IEC 13560:2009 Information technology – Telecommunications and information exchange between systems – Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908
- ISO/IEC TR 13561:1994 Information technology – Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090
- ISO 13565 Geometrical Product Specifications (GPS) – Surface texture: Profile method; Surfaces having stratified functional properties
- ISO 13565-1:1996 Part 1: Filtering and general measurement conditions
- ISO 13565-2:1996 Part 2: Height characterization using the linear material ratio curve
- ISO 13565-3:1998 Part 3: Height characterization using the material probability curve
- ISO 13567 Technical product documentation – Organization and naming of layers for CAD
- ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
- ISO/TR 13569:2005 Financial services – Information security guidelines
- ISO 13574:2015 Industrial furnaces and associated processing equipment – Vocabulary
- ISO/IEC 13575:1995 Information technology – Telecommunications and information exchange between systems – 50-pole interface connector mateability dimensions and contact number assignments
- ISO 13577 Industrial furnaces and associated processing equipment – Safety
- ISO 13577-1:2016 Part 1: General requirements
- ISO 13577-2:2014 Part 2: Combustion and fuel handling systems
- ISO 13577-3:2016 Part 3: Generation and use of protective and reactive atmosphere gases
- ISO 13577-4:2014 Part 4: Protective systems
- ISO 13579 Industrial furnaces and associated processing equipment – Method of measuring energy balance and calculating efficiency
- ISO 13579-1:2013 General methodology
- ISO 13579-2:2013 Reheating furnaces for steel
- ISO 13579-3:2013 Batch-type aluminium melting furnaces
- ISO 13579-4:2013 Furnaces with protective or reactive atmosphere
- ISO/TS 13582:2015 Health informatics – Sharing of OID registry information
- ISO 13586:2000 Plastics – Determination of fracture toughness (GIC and KIC) – Linear elastic fracture mechanics (LEFM) approach
- ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- ISO/IEC TR 13594:1995 Information technology – Lower layers security
- ISO 13606 Health informatics – Electronic health record communication
- ISO 13606-1:2008 Part 1: Reference model
- ISO 13606-2:2008 Part 2: Archetype interchange specification
- ISO 13606-3:2009 Part 3: Reference archetypes and term lists
- ISO/TS 13606-4:2009 Part 4: Security
- ISO 13606-5:2010 Part 5: Interface specification
- ISO 13611:2014 Interpreting – Guidelines for community interpreting
- ISO/IEC 13614:1995 Information technology – Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
- ISO 13616 Financial services – International bank account number (IBAN)
- ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
- ISO 13628-1:2005 Part 1: General requirements and recommendations
- ISO 13628-2:2006 Part 2: Unbonded flexible pipe systems for subsea and marine applications
- ISO 13628-3:2000 Part 3: Through flowline (TFL) systems
- ISO 13628-4:2010 Part 4: Subsea wellhead and tree equipment
- ISO 13628-5:2009 Part 5: Subsea umbilicals
- ISO 13628-6:2006 Part 6: Subsea production control systems
- ISO 13628-7:2005 Part 7: Completion/workover riser systems
- ISO 13628-8:2002 Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
- ISO 13628-9:2000 Part 9: Remotely Operated Tool (ROT) intervention systems
- ISO 13628-10:2005 Part 10: Specification for bonded flexible pipe
- ISO 13628-11:2007 Part 11: Flexible pipe systems for subsea and marine applications
- ISO 13628-15:2011 Part 15: Subsea structures and manifolds
- ISO/IEC 13642:1999 Information technology – Elements of management information related to the OSI Physical Layer
- ISO 13653:1996 Optics and optical instruments – General optical test methods – Measurement of relative irradiance in the image field
- ISO 13666:2012 Ophthalmic optics – Spectacle lenses – Vocabulary
- ISO/IEC 13673:2000 Information technology – Document processing and related communication – Conformance testing for Standard Generalized Markup Language (SGML) systems
- ISO 13687 Tourism and related services – Yacht harbours
- ISO 13687-1:2017 Part 1: Minimum requirements for basic service level harbours
- ISO 13687-2:2017 Part 2: Minimum requirements for intermediate service level harbours
- ISO 13687-3:2017 Part 3: Minimum requirements for high service level harbours
- ISO 13694:2015 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) density distribution
- ISO 13695:2004 Optics and photonics – Lasers and laser-related equipment – Test methods for the spectral characteristics of lasers
- ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components
- ISO 13697:2006 Optics and photonics – Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components
- ISO 13702 Petroleum and natural gas industries – Control and mitigation of fires and explosions on offshore production installations – Requirements and guidelines
- ISO/IEC 13712 Information technology – Remote Operations
- ISO/IEC 13712-1:1995 Concepts, model and notation
- ISO/IEC 13712-2:1995 OSI realizations – Remote Operations Service Element (ROSE) service definition
- ISO/IEC 13712-3:1995 OSI realizations – Remote Operations Service Element (ROSE) protocol specification
- ISO/IEC 13714:1995 Information technology – Document processing and related communication – User interface to telephone-based services – Voice messaging applications
- ISO 13715:2017 Technical product documentation—Edges of undefined shape—Indication and dimensioning
- ISO 13716:1999 Dentistry — Reversible-irreversible hydrocolloid impression material systems [Withdrawn: replaced with ISO 21563]
- ISO/IEC 13719 Information technology – Portable Common Tool Environment (PCTE)
- ISO/IEC 13719-1:1998 Part 1: Abstract specification
- ISO/IEC 13719-2:1998 Part 2: C programming language binding
- ISO/IEC 13719-3:1998 Part 3: Part 3: Ada programming language binding
- ISO/IEC 13719-4:1998 Part 4: IDL binding (Interface Definition Language)
- ISO 13720:2010 Meat and meat products – Enumeration of presumptive Pseudomonas spp.
- ISO 13722:2017 Microbiology of the food chain – Enumeration of Brochothrix spp. – Colony-count technique
- ISO 13731:2001 Ergonomics of the thermal environment – Vocabulary and symbols
- ISO 13732 Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces
- ISO 13732-1:2006 Part 1: Hot surfaces
- ISO/TS 13732-2:2001 Part 2: Human contact with surfaces at moderate temperature
- ISO/IEC 13751:2001 Information technology – Programming languages, their environments and system software interfaces – Programming language Extended APL
- ISO 13766:2006 Earth-moving machinery – Electromagnetic compatibility
- ISO 13779 Implants for surgery – Hydroxyapatite
- ISO 13779-2:2008 Part 2: Coatings of hydroxyapatite
- ISO 13779-3:2008 Part 3: Chemical analysis and characterization of crystallinity and phase purity
- ISO 13779-4:2002 Part 4: Determination of coating adhesion strength
- ISO 13779-6:2015 Part 6: Powders
- ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
- ISO 13782:1996 Implants for surgery – Metallic materials – Unalloyed tantalum for surgical implant applications
- ISO/IEC 13800:1996 Information technology – Procedure for the registration of identifiers and attributes for volume and file structure
- ISO 13810:2015 Tourism services – Industrial tourism – Service provision
- ISO/TS 13811:2015 Tourism and related services – Guidelines on developing environmental specifications for accommodation establishments
- ISO/IEC 13816:2007 Information technology – Programming languages, their environments and system software interfaces – Programming language ISLISP
- ISO/IEC 13817 Information technology – Programming languages, their environments and system software interfaces – Vienna Development Method – Specification Language
- ISO/IEC 13817-1:1996 Part 1: Base language
- ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
- ISO/TS 13830:2013 Nanotechnologies – Guidance on voluntary labelling for consumer products containing manufactured nano-objects
- ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
- ISO/IEC TR 13841:1995 Information technology – Guidance on measurement techniques for 90 mm optical disk cartridges
- ISO/IEC 13842:1995 Information technology – 130 mm optical disk cartridges for information interchange – Capacity: 2 GB per cartridge
- ISO 13843:2017 Water quality – Requirements for establishing performance characteristics of quantitative microbiological methods
- ISO 13849 Safety of machinery – Safety related parts of control systems
- ISO 13850:2015 Safety of machinery – Emergency stop function – Principles for design
- ISO 13854:2017 Safety of machinery – Minimum gaps to avoid crushing of parts of the human body
- ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body
- ISO 13860:2016 Machinery for forestry – Forwarders – Terms, definitions and commercial specifications
- ISO 13861:2000 Machinery for forestry – Wheeled skidders – Terms, definitions and commercial specifications
- ISO 13862:2000 Machinery for forestry – Feller-bunchers – Terms, definitions and commercial specifications
- ISO/IEC 13863:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Path replacement additional network feature
- ISO/IEC 13864:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Name identification supplementary services
- ISO/IEC 13865:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Transfer supplementary service
- ISO/IEC 13866:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call completion supplementary services
- ISO/IEC 13868:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Name identification supplementary services
- ISO/IEC 13869:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Transfer supplementary service
- ISO/IEC 13870:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Completion supplementary services
- ISO/IEC 13871:1995 Information technology – Telecommunications and information exchange between systems – Private telecommunications networks – Digital channel aggregation
- ISO/IEC 13872:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Diversion supplementary services
- ISO/IEC 13873:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Diversion supplementary services
- ISO/IEC 13874:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Path Replacement additional network feature
- ISO/IEC 13886:1996 Information technology – Language-Independent Procedure Calling (LIPC)
- ISO/IEC 13888 Information technology – Security techniques – Non-repudiation
- ISO/IEC 13888-1:2009 Part 1: General
- ISO/IEC 13888-2:2010 Part 2: Mechanisms using symmetric
- ISO/IEC 13888-3:2009 Part 3: Mechanisms using asymmetric techniques
- ISO 13920:1996 Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position
- ISO/IEC 13923:1996 Information technology – 3.81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-2 format using 120 m length tape
- ISO 13926 Pen systems
- ISO 13926-1:2004 Part 1: Glass cylinders for pen-injectors for medical use
- ISO 13926-2:2011 Part 2: Plunger stoppers for pen-injectors for medical use
- ISO 13926-3:2012 Part 3: Seals for pen-injectors for medical use
- ISO 13940:2015 Health informatics – System of concepts to support continuity of care
- ISO 13943:2017 Fire safety – Vocabulary
- ISO 13958:2014 Concentrates for haemodialysis and related therapies
- ISO 13959:2014 Water for haemodialysis and related therapies
- ISO 13960:2010 Cardiovascular implants and extracorporeal systems – Plasmafilters
- ISO/IEC 13961:2000 Information technology – Scalable Coherent Interface (SCI)
- ISO/IEC 13962:1995 Information technology – Data interchange on 12.7 mm, 112-track magnetic tape cartridges – DLT 2 format
- ISO/IEC 13963:1995 Information technology – Data interchange on 90 mm optical disk cartridges – Capacity: 230 MB per cartridge
- ISO 13969:2003 Milk and milk products – Guidelines for a standardized description of microbial inhibitor tests
- ISO 13970:2011 Recreational diving services – Requirements for the training of recreational snorkelling guides
- ISO/TS 13972:2015 Health informatics – Detailed clinical models, characteristics and processes
- ISO/TR 13973:2014 Artificial recharge to groundwater
- ISO 13990 Textile machinery and accessories – Yarn feeders and yarn control for knitting machines
- ISO 13990-1:2006 Part 1: Vocabulary
- ISO 14000 Environmental management systems (This is a set of standards, rather than a single standard)
- ISO 14001:2015 Environmental management systems – Requirements with guidance for use
- ISO 14004:2016 Environmental management systems – General guidelines on implementation
- ISO 14005:2010 Environmental management systems – Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
- ISO 14006:2011 Environmental management systems – Guidelines for incorporating ecodesign
- ISO 14015:2022 Environmental management — Guidelines for environmental due diligence assessment
- ISO 14020:2000 Environmental labels and declarations – General principles
- ISO 14031 Environmental management – Environmental performance evaluation – Guidelines
- ISO 14045:2012 describes the principles, requirements and guidelines for eco-efficiency assessment for product systems [3]
- ISO 14046:2014 – Environmental management — Water footprint — Principles, requirements and guidelines
- ISO 14050:2009 Environmental management – Vocabulary
- ISO 14051 Environmental management – Material flow cost accounting – General framework
- ISO 14064 Greenhouse gases
- ISO/TR 14073:2017 Environmental management – Water footprint – Illustrative examples on how to apply ISO 14046
- ISO 14084 Process diagrams for power plants
- ISO 14084-1:2015 Part 1: Specification for diagrams
- ISO 14084-2:2015 Part 2: Graphical symbols
- ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
- ISO/IEC 14102:2008 Information technology – Guideline for the evaluation and selection of CASE tools
- ISO/TR 14105:2011 Document management – Change management for successful electronic document management system (EDMS) implementation
- ISO 14117:2012 Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
- ISO 14132 Optics and photonics – Vocabulary for telescopic systems
- ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
- ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
- ISO 14132-3:2014 Part 3: Terms for telescopic sights
- ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
- ISO 14132-5:2008 Part 5: Terms for night vision devices
- ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Identification supplementary services
- ISO 14139:2000 Hydrometric determinations – Flow measurements in open channels using structures – Compound gauging structures
- ISO/IEC 14143 Information technology – Software measurement – Functional size measurement
- ISO/IEC 14143-1:2007 Part 1: Definition of concepts
- ISO/IEC 14143-2:2011 Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
- ISO/IEC TR 14143-3:2003 Part 3: Verification of functional size measurement methods
- ISO/IEC TR 14143-4:2002 Part 4: Reference model
- ISO/IEC TR 14143-5:2004 Part 5: Determination of functional domains for use with functional size measurement
- ISO/IEC 14143-6:2012 Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
- ISO 14145 Roller ball pens and refills
- ISO 14145-2:1998 Part 2: Documentary use (DOC)
- ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
- ISO 14163:1998 Acoustics – Guidelines for noise control by silencers
- ISO 14164:1999 Stationary source emissions – Determination of the volume flowrate of gas streams in ducts – Automated method
- ISO/IEC 14165 Information technology – Fibre Channel
- ISO/IEC 14165-114:2005 Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)
- ISO/IEC 14165-115:2006 Part 115: Physical Interfaces (FC-PI)
- ISO/IEC 14165-116:2005 Part 116: 10 Gigabit (10GFC)
- ISO/IEC TR 14165-117:2007 Part 117: Methodologies for jitter and signal quality (MJSQ)
- ISO/IEC 14165-122:2005 Part 122: Arbitrated Loop-2 (FC-AL-2)
- ISO/IEC 14165-131:2000 Part 131: Switch Fabric Requirements (FC-SW)
- ISO/IEC 14165-133:2010 Part 133: Switch Fabric-3 (FC-SW-3)
- ISO/IEC 14165-141:2001 Part 141: Fabric Generic Requirements (FC-FG)
- ISO/IEC 14165-211:1999 Part 211: Mapping to HIPPI-FP (FC-FP)
- ISO/IEC 14165-222:2005 Part 222: Single-byte command code 2 mapping protocol (FC-SB-2)
- ISO/IEC 14165-241:2005 Part 241: Backbone 2 (FC-BB-2)
- ISO/IEC 14165-243:2012 Part 243: Backbone 3 (FC-BB-3)
- ISO/IEC 14165-251:2008 Part 251: Framing and Signaling (FC-FS)
- ISO/IEC TR 14165-312:2009 Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)
- ISO/IEC TR 14165-313:2013 Part 313: Avionics Environment—Anonymous Synchronous Messaging (FC-AE-ASM)
- ISO/IEC TR 14165-314:2013 Part 314: Avionics Environment – Remote Direct Memory Access (FC-AE-RDMA)
- ISO/IEC 14165-321:2009 Part 321: Audio-Video (FC-AV)
- ISO/IEC 14165-331:2007 Part 331: Virtual Interface (FC-VI)
- ISO/IEC TR 14165-372:2011 Part 372: Methodologies of interconnects-2 (FC-MI-2)
- ISO/IEC 14165-414:2007 Part 414: Generic Services—4 (FC-GS-4)
- ISO/IEC 14165-521:2009 Part 521: Fabric application interface standard (FAIS)
- ISO/IEC 14169:1995 Information technology – 90 mm flexible disk cartridges – 21 MB formatted capacity – ISO Type 305
- ISO 14189:2013 Water quality – Enumeration of Clostridium perfringens – Method using membrane filtration
- ISO 14199:2015 Health informatics – Information models – Biomedical Research Integrated Domain Group (BRIDG) Model
- ISO 14223 Radiofrequency identification of animals – Advanced transponders
- ISO 14224 Petroleum, petrochemical and natural gas industries – Collection and exchange of reliability and maintenance data for equipment
- ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
- ISO 14242 Implants for surgery – Wear of total hip-joint prostheses
- ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
- ISO 14242-2:2016 Part 2: Methods of measurement
- ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
- ISO 14243 Implants for surgery – Wear of total knee-joint prostheses
- ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
- ISO 14243-2:2016 Part 2: Methods of measurement
- ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
- ISO/IEC 14251:1995 Information technology – Data interchange on 12.7 mm 36-track magnetic tape cartridges
- ISO/IEC TR 14252:1996 Information technology – Guide to the POSIX Open System Environment (OSE) [Withdrawn without replacement]
- ISO 14253 Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment
- ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
- ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
- ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
- ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
- ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
- ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information
- ISO/TR 14283:2004 Implants for surgery – Fundamental principles
- ISO 14289 Document management applications – Electronic document file format enhancement for accessibility
- ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1)
- ISO/TR 14292:2012 Health informatics – Personal health records – Definition, scope and context
- ISO 14296:2016 Intelligent transport systems – Extension of map database specifications for applications of cooperative ITS
- ISO 14302:2002 Space systems – Electromagnetic compatibility requirements
- ISO 14362 Textiles – Methods for determination of certain aromatic amines derived from azo colorants
- ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
- ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
- ISO/IEC TR 14369:2018 Information technology – Programming languages, their environments and system software interfaces – Guidelines for the preparation of language-independent service specifications (LISS)
- ISO 14405 Geometrical product specifications (GPS) – Dimensional tolerancing
- ISO 14405-1:2016 Part 1: Linear sizes
- ISO 14405-2:2011 Part 2: Dimensions other than linear sizes
- ISO 14405-3:2016 Part 3: Angular sizes
- ISO 14406:2010 Geometrical product specifications (GPS) – Extraction
- ISO 14408:2016 Tracheal tubes designed for laser surgery – Requirements for marking and accompanying information
- ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and other paper documents for archive and library use – Methods and materials
- ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016
- ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity assessment
- ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
- ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles
- ISO 14451-1:2013 Part 1: Terminology
- ISO 14452:2012 Network services billing – Requirements
- ISO 14461 Milk and milk products – Quality control in microbiological laboratories
- ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts
- ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
- ISO/IEC 14462:2010 Information technology – Open-edi reference model
- ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis
- ISO/IEC TR 14471:2007 Information technology – Software engineering – Guidelines for the adoption of CASE tools
- ISO/IEC 14473:1999 Information technology – Office equipment – Minimum information to be specified for image scanners
- ISO/IEC 14474:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Functional requirements for static circuit-mode inter-PINX connections
- ISO/IEC TR 14475:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Architecture and scenarios for Private Integrated Services Networking
- ISO/IEC 14476 Information technology – Enhanced communications transport protocol
- ISO/IEC 14476-1:2002 Specification of simplex multicast transport
- ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport
- ISO/IEC 14476-3:2008 Specification of duplex multicast transport
- ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport
- ISO/IEC 14476-5:2008 Specification of N-plex multicast transport
- ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport
- ISO/IEC 14478 Information technology – Computer graphics and image processing – Presentation Environment for Multimedia Objects (PREMO)
- ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO
- ISO/IEC 14478-2:1998 Part 2: Foundation Component
- ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services
- ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component
- ISO/IEC 14492:2001 Information technology – Lossy/lossless coding of bi-level images
- ISO/IEC 14495 Information technology – Lossless and near-lossless compression of continuous-tone still images
- ISO/IEC 14495-1:1999 Baseline
- ISO/IEC 14495-2:2003 Extensions
- ISO/IEC 14496 Information technology – Coding of audio-visual objects
- ISO 14500:2003 Textile machinery and accessories – Harnesses for Jacquard weaving machines – Vocabulary
- ISO 14509 Small craft – Airborne sound emitted by powered recreational craft
- ISO 14509-1:2008 Part 1: Pass-by measurement procedures
- ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures
- ISO 14511:2001 Measurement of fluid flow in closed conduits – Thermal mass flowmeters
- ISO/IEC 14515 Information technology – Portable Operating System Interface (POSIX) – Test methods for measuring conformance to POSIX
- ISO/IEC 14515-1:2000 Part 1: System interfaces
- ISO/IEC TR 14516:2002 Information technology – Security techniques – Guidelines for the use and management of Trusted Third Party services
- ISO/IEC 14517:1996 Information technology – 130 mm optical disk cartridges for information interchange – Capacity: 2.6 GB per cartridge
- ISO/IEC 14519:2001 Information technology – POSIX Ada Language Interfaces – Binding for System Application Program Interface (API)
- ISO 14532:2014 Natural gas – Vocabulary
- ISO 14533 Processes, data elements and documents in commerce, industry and administration – Long term signature profiles
- ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)
- ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)
- ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)
- ISO 14534:2011 Ophthalmic optics – Contact lenses and contact lens care products – Fundamental requirements
- ISO 14539:2000 Manipulating industrial robots – Object handling with grasp-type grippers – Vocabulary and presentation of characteristics
- ISO/IEC 14543 Information technology – Home Electronic System (HES) architecture
- ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity
- ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers – Application layer for network based control of HES Class 1
- ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1
- ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1
- ISO/IEC 14543-3-4:2007 Part 3-4: System management – Management procedures for network based control of HES Class 1
- ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers – Power line for network based control of HES Class 1
- ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers – Network based on HES Class 1, twisted pair
- ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers – Radio frequency for network based control of HES Class 1
- ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet (WSP) protocol optimized for energy harvesting – Architecture and lower layer protocols
- ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting – Architecture and lower layer protocols
- ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building
- ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers – Application layer for network enhanced control devices of HES Class 1
- ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers – Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1
- ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1
- ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 – Core protocol
- ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Basic application
- ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device validation
- ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device type
- ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Service type
- ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing – Remote access system architecture
- ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Remote access core protocol
- ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 – Remote access service platform
- ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – AV profile
- ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – File profile
- ISO 14560:2004 Acceptance sampling procedures by attributes – Specified quality levels in nonconforming items per million
- ISO/TR 14564:1995 Shipbuilding and marine structures – Marking of escape routes
- ISO/IEC 14568:1997 Information technology – DXL: Diagram eXchange Language for tree-structured charts
- ISO/IEC 14575:2000 Information technology – Microprocessor systems – Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
- ISO/IEC 14576:1999 Information technology – Synchronous Split Transfer Type System Bus (STbus) – Logical Layer
- ISO 14580:2011 Hexalobular socket cheese head screws
- ISO 14588:2000 Blind rivets – Terminology and definitions
- ISO/IEC 14598 Software engineering – Product evaluation[Note 3]
- ISO/IEC 14598-5:1998 Part 5: Process for evaluators
- ISO/IEC 14598-6:2001 Part 6: Documentation of evaluation modules
- ISO 14602:2010 Non-active surgical implants – Implants for osteosynthesis – Particular requirements
- ISO 14607:2007 Non-active surgical implants – Mammary implants – Particular requirements
- ISO 14617 Graphical symbols for diagrams
- ISO 14617-1:2005 Part 1: General information and indexes
- ISO 14617-2:2002 Part 2: Symbols having general application
- ISO 14617-3:2002 Part 3: Connections and related devices
- ISO 14617-3:2002 Part 3: Connections and related devices
- ISO 14617-4:2002 Part 4: Actuators and related devices
- ISO 14617-5:2002 Part 5: Measurement and control devices
- ISO 14617-6:2002 Part 6: Measurement and control functions
- ISO 14617-7:2002 Part 7: Basic mechanical components
- ISO 14617-8:2002 Part 8: Valves and dampers
- ISO 14617-9:2002 Part 9: Pumps, compressors and fans
- ISO 14617-10:2002 Part 10: Fluid power converters
- ISO 14617-11:2002 Part 11: Devices for heat transfer and heat engines
- ISO 14617-12:2002 Part 12: Devices for separating, purification and mixing
- ISO 14617-13:2004 Part 13: Devices for material processing
- ISO 14617-14:2004 Part 14: Devices for transport and handling of material
- ISO 14617-15:2002 Part 15: Installation diagrams and network maps
- ISO 14630:2012 Non-active surgical implants – General requirements
- ISO 14638:2015 Geometrical product specifications (GPS) – Matrix model
- ISO/TR 14639 Health informatics – Capacity-based eHealth architecture roadmap
- ISO/TR 14639-1:2012 Part 1: Overview of national eHealth initiatives
- ISO/TR 14639-2:2014 Part 2: Architectural components and maturity model
- ISO 14641 Electronic archiving
- ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
- ISO 14644 Cleanrooms and associated controlled environments
- ISO/IEC 14651:2020 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
- ISO/IEC 14662:2010 Information technology – Open-edi reference model
- ISO/TR 14685:2001 Hydrometric determinations – Geophysical logging of boreholes for hydrogeological purposes – Considerations and guidelines for making measurements
- ISO 14686:2003 Hydrometric determinations – Pumping tests for water wells – Considerations and guidelines for design, performance and use
- ISO 14695:2003 Industrial fans – Method of measurement of fan vibration
- ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
- ISO 14698-1:2003 General principles and methods
- ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
- ISO/IEC 14699:1997 Information technology – Open Systems Interconnection – Transport Fast Byte Protocol
- ISO/IEC 14700:1997 Information technology – Open Systems Interconnection – Network Fast Byte Protocol
- ISO 14708 Implants for surgery – Active implantable medical devices
- ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
- ISO 14708-2:2012 Part 2: Cardiac pacemakers
- ISO 14708-3:2017 Part 3: Implantable neurostimulators
- ISO 14708-4:2008 Part 4: Implantable infusion pumps
- ISO 14708-5:2010 Part 5: Circulatory support devices
- ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
- ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems
- ISO/IEC 14709 Information technology – Configuration of Customer Premises Cabling (CPC) for applications
- ISO/IEC 14709-1:1997 Part 1: Integrated Services Digital Network (ISDN) basic access
- ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network (ISDN) primary rate
- ISO 14722:1998 Moped and moped-rider kinematics – Vocabulary
- ISO 14726:2008 Ships and marine technology – Identification colours for the content of piping systems
- ISO 14729:2001 Ophthalmic optics – Contact lens care products – Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
- ISO 14730:2014 Ophthalmic optics – Contact lens care products – Antimicrobial preservative efficacy testing and guidance on determining discard date
- ISO 14739 Document management – 3D use of Product Representation Compact (PRC) format
- ISO 14739-1:2014 Part 1: PRC 10001
- ISO/TR 14742:2010 Financial services – Recommendations on cryptographic algorithms and their use
- ISO/IEC 14750:1999 Information technology – Open Distributed Processing – Interface Definition Language
- ISO/IEC 14752:2000 Information technology – Open Distributed Processing – Protocol support for computational interactions
- ISO/IEC 14753:1999 Information technology – Open Distributed Processing – Interface references and binding
- ISO/IEC 14754:1999 Information technology – Pen-Based Interfaces – Common gestures for Text Editing with Pen-Based Systems
- ISO/IEC 14755:1997 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
- ISO/IEC 14756:1999 Information technology – Measurement and rating of performance of computer-based software systems
- ISO/IEC 14760:1997 Information technology – Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change – Capacity: 1.3 GB per cartridge
- ISO/IEC 14762:2009 Information technology – Functional safety requirements for Home and Building Electronic Systems (HBES)
- ISO/IEC 14763 Information technology – Implementation and operation of customer premises cabling
- ISO/IEC 14763-1:1999 Part 1: Administration
- ISO/IEC 14763-2:2012 Part 2: Planning and installation
- ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation – Identifiers within administration systems
- ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling
- ISO/IEC 14764:2006 Software Engineering – Software Life Cycle Processes – Maintenance
- ISO/IEC 14765:1997 Information technology – Framework for protocol identification and encapsulation
- ISO/IEC 14766:1997 Information technology – Telecommunications and information exchange between systems – Use of OSI applications over the Internet Transmission Control Protocol (TCP)
- ISO/IEC 14769:2001 Information technology – Open Distributed Processing – Type Repository Function
- ISO/IEC 14771:1999 Information technology – Open Distributed Processing – Naming framework
- ISO/IEC 14772 Information technology – Computer graphics and image processing – The Virtual Reality Modeling Language (VRML)[Note 3]
- ISO/IEC 14772-1:1997 Part 1: Functional specification and UTF-8 encoding
- ISO/IEC 14772-2:2004 Part 2: External authoring interface (EAI)
- ISO/IEC 14776 Information technology – Small Computer System Interface (SCSI)[Note 3]
- ISO/IEC 14776-112:2002 Part 112: Parallel Interface-2 (SPI-2)
- ISO/IEC 14776-113:2002 Part 113: Parallel Interface-3 (SPI-3)
- ISO/IEC 14776-115:2004 Part 115: Parallel Interface-5 (SPI-5)
- ISO/IEC 14776-121:2010 Part 121: Passive Interconnect Performance (PIP)
- ISO/IEC 14776-150:2004 Part 150: Serial Attached SCSI (SAS)
- ISO/IEC 14776-151:2010 Part 151: Serial Attached SCSI – 1.1 (SAS-1.1)
- ISO/IEC 14776-153:2015 Part 153: Serial Attached SCSI – 2.1 (SAS-2.1)
- ISO/IEC 14776-154:2017 Part 154: Serial Attached SCSI – 3 (SAS-3)
- ISO/IEC 14776-222:2005 Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2)
- ISO/IEC 14776-223:2008 Part 223: Fibre Channel Protocol for SCSI, Third Version (FCP-3)
- ISO/IEC 14776-232:2001 Part 232: Serial Bus Protocol 2 (SBP-2)
- ISO/IEC 14776-251:2014 Part 251: USB attached SCSI (UAS)
- ISO/IEC 14776-261:2012 Part 261: SAS Protocol Layer (SPL)
- ISO/IEC 14776-262:2017 Part 262: SAS protocol layer – 2 (SPL-2)
- ISO/IEC 14776-321:2002 Part 321: SCSI-3 Block Commands (SBC)
- ISO/IEC 14776-322:2007 Part 322: SCSI Block Commands – 2 (SBC-2)
- ISO/IEC 14776-323:2017 Part 323: SCSI Block commands – 3 (SBC-3)
- ISO/IEC 14776-326:2015 Part 326: Reduced block commands (RBC)
- ISO/IEC 14776-331:2002 Part 331: Stream Commands (SSC)
- ISO/IEC 14776-333:2013 Part 333: SCSI Stream Commands – 3 (SSC-3)
- ISO/IEC 14776-341:2000 Part 341: Controller Commands (SCC)
- ISO/IEC 14776-342:2000 Part 342: Controller Commands – 2 (SCC-2)
- ISO/IEC 14776-351:2007 Part 351: Medium Changer Commands (SCSI-3 SMC)
- ISO/IEC 14776-362:2006 Part 362: Multimedia commands-2 (MMC-2)
- ISO/IEC 14776-372:2011 Part 372: SCSI Enclosure Services – 2 (SES-2)
- ISO/IEC 14776-381:2000 Part 381: Optical Memory Card Device Commands (OMC)
- ISO/IEC 14776-411:1999 Part 411: SCSI-3 Architecture Model (SCSI-3 SAM)
- ISO/IEC 14776-412:2006 Part 412: Architecture Model -2 (SAM-2)
- ISO/IEC 14776-413:2007 Part 413: SCSI Architecture Model -3 (SAM-3)
- ISO/IEC 14776-414:2009 Part 414: SCSI Architecture Model-4 (SAM-4)
- ISO/IEC 14776-452:2005 Part 452: SCSI Primary Commands – 2 (SPC-2)
- ISO/IEC 14776-453:2009 Part 453: Primary commands-3 (SPC-3)
- ISO 14785:2014 Tourist information offices – Tourist information and reception services – Requirements
- ISO/TR 14786:2014 Nanotechnologies – Considerations for the development of chemical nomenclature for selected nano-objects
- ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
- ISO/TR 14806:2013 Intelligent transport systems – Public transport requirements for the use of payment applications for fare media
- ISO 14813 Intelligent transport systems – Reference model architecture(s) for the ITS sector
- ISO 14813-1:2015 Part 1: ITS service domains, service groups and services
- ISO 14813-5:2010 Part 5: Requirements for architecture description in ITS standards
- ISO 14813-6:2009 Part 6: Data presentation in ASN.1
- ISO 14814:2006 Road transport and traffic telematics – Automatic vehicle and equipment identification – Reference architecture and terminology
- ISO 14815:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – System specifications
- ISO 14816:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – Numbering and data structure
- ISO 14817 Intelligent transport systems – ITS central data dictionaries
- ISO 14817-1:2015 Part 1: Requirements for ITS data definitions
- ISO 14817-2:2015 Part 2: Governance of the Central ITS Data Concept Registry
- ISO 14817-3:2017 Part 3: Object identifier assignments for ITS data concepts
- ISO 14819 Intelligent transport systems – Traffic and travel information messages via traffic message coding
- ISO 14819-1:2013 Part 1: Coding protocol for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
- ISO 14819-2:2013 Part 2: Event and information codes for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
- ISO 14819-3:2013 Part 3: Location referencing for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
- ISO 14819-6:2006 Part 6: Encryption and conditional access for the Radio Data System – Traffic Message Channel ALERT C coding
- ISO 14823:2017 Intelligent transport systems – Graphic data dictionary
- ISO 14825:2011 Intelligent transport systems – Geographic Data Files (GDF) – GDF5.0
- ISO 14827 Transport information and control systems – Data interfaces between centres for transport information and control systems
- ISO 14827-1:2005 Part 1: Message definition requirements
- ISO 14827-2:2005 Part 2: DATEX-ASN
- ISO/IEC 14833:1996 Information technology – Data interchange on 12.7 mm 128-Track magnetic tape cartridges – DLT 3 format
- ISO/IEC 14834:1996 Information technology – Distributed Transaction Processing – The XA Specification
- ISO 14837 Mechanical vibration – Ground-borne noise and vibration arising from rail systems
- ISO 14837-1:2005 Part 1: General guidance
- ISO/TS 14837-31:2017 Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
- ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground
- ISO 14839 Mechanical vibration – Vibration of rotating machinery equipped with active magnetic bearings
- ISO 14839-1:2002 Part 1: Vocabulary
- ISO 14839-2:2004 Part 2: Evaluation of vibration
- ISO 14839-3:2006 Part 3: Evaluation of stability margin
- ISO 14839-4:2012 Part 4: Technical guidelines
- ISO/IEC 14840:1996 Information technology – 12.65 mm wide magnetic tape cartridge for information interchange – Helical scan recording – Data-D3-1 format
- ISO/IEC 14841:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call offer supplementary service
- ISO/IEC 14842:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Do not disturb and do not disturb override supplementary services
- ISO/IEC 14843:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Offer supplementary service
- ISO/IEC 14844:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Do Not Disturb and Do Not Disturb Override supplementary services
- ISO/IEC 14845:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call intrusion supplementary service
- ISO/IEC 14846:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Intrusion supplementary service
- ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
- ISO 14855-1:2012 General method
- ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
- ISO/IEC 14863:1996 Information technology – System-Independent Data Format (SIDF)
- ISO/TR 14873:2013 Information and documentation – Statistics and quality issues for web archiving
- ISO 14879 Implants for surgery – Total knee-joint prostheses
- ISO 14879-1:2000 Part 1: Determination of endurance properties of knee tibial trays
- ISO 14880 Optics and photonics – Microlens arrays
- ISO 14880-1:2016 Part 1: Vocabulary and general properties
- ISO 14880-2:2006 Part 2: Test methods for wavefront aberrations
- ISO 14880-3:2006 Part 3: Test methods for optical properties other than wavefront aberrations
- ISO 14880-4:2006 Part 4: Test methods for geometrical properties
- ISO/TR 14880-5:2010 Part 5: Guidance on testing
- ISO 14881:2001 Integrated optics – Interfaces – Parameters relevant to coupling properties
- ISO/IEC 14882:2020 Programming languages — C++
- ISO/IEC 14888 Information technology – Security techniques – Digital signatures with appendix
- ISO/IEC 14888-1:2008 Part 1: General
- ISO/IEC 14888-2:2008 Part 2: Integer factorization based mechanisms
- ISO/IEC 14888-3:2016 Part 3: Discrete logarithm based mechanisms
- ISO 14889:2013 Ophthalmic optics – Spectacle lenses – Fundamental requirements for uncut finished lenses
- ISO/TS 14904:2002 Road transport and traffic telematics – Electronic fee collection (EFC) – Interface specification for clearing between operators
- ISO 14906:2011 Electronic fee collection – Application interface definition for dedicated short-range communication
- ISO/TS 14907 Electronic fee collection – Test procedures for user and fixed equipment
- ISO/TS 14907-1:2015 Part 1: Description of test procedures
- ISO/TS 14907-2:2016 Part 2: Conformance test for the on-board unit application interface
- ISO/IEC 14908 Information technology – Control network protocol
- ISO/IEC 14908-1:2012 Part 1: Protocol stack
- ISO/IEC 14908-2:2012 Part 2: Twisted pair communication
- ISO/IEC 14908-3:2012 Part 3: Power line channel specification
- ISO/IEC 14908-4:2012 Part 4: IP communication
- ISO 14915 Software ergonomics for multimedia user interfaces
- ISO 14915-1:2002 Part 1: Design principles and framework
- ISO 14915-2:2003 Part 2: Multimedia navigation and control
- ISO 14915-3:2002 Part 3: Media selection and combination
- ISO 14917:2017 Thermal spraying – Terminology, classification
- ISO 14949:2001 Implants for surgery – Two-part addition-cure silicone elastomers
- ISO 14963:2003 Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts
- ISO 14971:2007 Medical devices – Application of risk management to medical devices
- ISO 14972:1998 Sterile obturators for single use with over-needle peripheral intravascular catheters
- ISO 14975:2000 Surface chemical analysis – Information formats
- ISO 14976:1998 Surface chemical analysis – Data transfer format
- ISO/IEC 14977:1996 Information technology – Syntactic metalanguage – Extended BNF
- ISO 14978:2006 Geometrical product specifications (GPS) – General concepts and requirements for GPS measuring equipment
- ISO 14982:1998 Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria
- ISO 15000 – ISO 15999
- [edit]
- ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
- ISO 15000-5:2014 Part 5: Core Components Specification (CCS)
- ISO 15001:2010 Anaesthetic and respiratory equipment – Compatibility with oxygen
- ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
- ISO 15004 Ophthalmic instruments – Fundamental requirements and test methods
- ISO 15004-1:2006 Part 1: General requirements applicable to all ophthalmic instruments
- ISO 15004-2:2007 Part 2: Light hazard protection
- ISO 15006:2011 Road vehicles – Ergonomic aspects of transport information and control systems – Specifications for in-vehicle auditory presentation
- ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles – Requirements and test methods
- ISO 15016:2015 Ships and marine technology – Guidelines for the assessment of speed and power performance by analysis of speed trial data
- ISO/IEC 15018:2004 Information technology – Generic cabling for homes
- ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
- ISO/IEC 15026 Systems and software engineering—Systems and software assurance
- ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary
- ISO/IEC 15026-2:2011 Part 2: Assurance case
- ISO/IEC 15026-3:2015 Part 3: System integrity levels
- ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle
- ISO 15031 Road vehicles – Communication between vehicle and external equipment for emissions-related diagnostics
- ISO 15031-2:2010 Part 2: Guidance on terms, definitions, abbreviations and acronyms
- ISO 15032:2000 Prostheses – Structural testing of hip units
- ISO/IEC 15041:1997 Information technology – Data interchange on 90 mm optical disk cartridges – Capacity: 640 MB per cartridge
- ISO/IEC TR 15044:2000 Information technology – Terminology for the Home Electronic System (HES)
- ISO/IEC 15045 Information technology – Home Electronic System (HES) gateway
- ISO/IEC 15045-1:2004 Part 1: A residential gateway model for HES
- ISO/IEC 15045-2:2012 Part 2: Modularity and protocol
- ISO/IEC 15049:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Advice of charge supplementary services
- ISO/IEC 15050:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Advice Of Charge supplementary services
- ISO/IEC 15051:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Recall supplementary service
- ISO/IEC 15052:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Recall supplementary service
- ISO/IEC 15053:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Interception additional network feature
- ISO/IEC 15054:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Interception additional network feature
- ISO/IEC 15055:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Transit counter additional network feature
- ISO/IEC 15056:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
- ISO/IEC 15067 Information technology – Home Electronic System (HES) application model[Note 4]
- ISO/IEC TR 15067-2:1997 Part 2: Lighting model for HES
- ISO/IEC 15067-3:2012 Part 3: Model of a demand-response energy management system for HES
- ISO/IEC TR 15067-3-2:2016 Part 3-2: GridWise interoperability context-setting framework
- ISO/IEC TR 15067-4:2001 Part 4: Security System for HES
- ISO 15075:2003 Transport information and control systems – In-vehicle navigation systems – Communications message set requirements
- ISO 15081:2011 Agricultural equipment – Graphical symbols for pressurized irrigation systems
- ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials
- ISO 15086 Hydraulic fluid power – Determination of the fluid-borne noise characteristics of components and systems
- ISO 15086-1:2001 Part 1: Introduction
- ISO 15086-2:2000 Part 2: Measurement of the speed of sound in a fluid in a pipe
- ISO 15086-3:2008 Part 3: Measurement of hydraulic impedance
- ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
- ISO 15112 Natural gas – Energy determination
- ISO 15118 Road vehicles – Vehicle to grid communication interface
- ISO 15137:2005 Self-adhesive hanging devices for infusion bottles and injection vials – Requirements and test methods
- ISO 15142 Implants for surgery – Metal intramedullary nailing systems
- ISO 15142-1:2003 Part 1: Intramedullary nails
- ISO 15142-2:2003 Part 2: Locking components
- ISO 15142-3:2003 Part 3: Connection devices and reamer diameter measurements
- ISO 15143 Earth-moving machinery and mobile road construction machinery – Worksite data exchange
- ISO 15143-1:2010 Part 1: System architecture
- ISO 15143-2:2010 Part 2: Data dictionary
- ISO/TS 15143-3:2016 Part 3: Telematics data
- ISO/IEC 15145:1997 Information technology – Programming languages – FORTH
- ISO/IEC 15149:2011 Information technology – Telecommunications and information exchange between systems – Magnetic field area network (MFAN)
- ISO/IEC 15149-1:2014 Part 1: Air interface
- ISO/IEC 15149-2:2015 Part 2: In-band Control Protocol for Wireless Power Transfer
- ISO/IEC 15149-3:2016 Part 3: Relay Protocol for Extended Range
- ISO/IEC 15149-4:2016 Part 4: Security Protocol for Authentication
- ISO 15174:2012 Milk and milk products – Microbial coagulants – Determination of total milk-clotting activity
- ISO 15188:2001 Project management guidelines for terminology standardization
- ISO 15189:2012 Medical laboratories – Particular requirements for quality and competence
- ISO/IEC 15200:1996 Information technology – Adaptive Lossless Data Compression algorithm (ALDC)
- ISO/IEC 15205:2000 SBus – Chip and module interconnect bus
- ISO 15212 Oscillation-type density meters
- ISO 15212-1:1998 Part 1: Laboratory instruments
- ISO 15212-2:2002 Part 2: Process instruments for homogeneous liquids
- ISO 15213:2003 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
- ISO 15214:1998 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of mesophilic lactic acid bacteria – Colony-count technique at 30 degrees C
- ISO 15216 Microbiology of the food chain – Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR[Note 4]
- ISO 15216-1:2017 Part 1: Method for quantification
- ISO/TS 15216-2:2013 Part 2: Method for qualitative detection
- ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
- ISO 15223-1:2016 Part 1: General requirements
- ISO 15223-2:2010 Part 2: Symbol development, selection and validation
- ISO 15225:2016 Medical devices – Quality management – Medical device nomenclature data structure
- ISO 15226:1999 Technical product documentation – Life cycle model and allocation of documents
- ISO 15230:2007 Mechanical vibration and shock – Coupling forces at the man–machine interface for hand-transmitted vibration
- ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products – Collected information on the effect of levels of water-soluble salt contamination
- ISO 15241:2012 Rolling bearings – Symbols for physical quantities
- ISO 15253:2000 Ophthalmic optics and instruments – Optical devices for enhancing low vision
- ISO 15254:2009 Ophthalmic optics and instruments – Electro-optical devices for enhancing low vision
- ISO 15261:2004 Vibration and shock generating systems – Vocabulary
- ISO/IEC TR 15285:1998 Information technology – An operational model for characters and glyphs
- ISO/IEC 15286:1999 Information technology – 130 mm optical disk cartridges for information interchange – Capacity: 5.2 GB per cartridge
- ISO/IEC/IEEE 15288:2015 Systems and software engineering – System life cycle processes
- ISO/IEC/IEEE 15289:2017 Systems and software engineering – Content of life-cycle information items (documentation)
- ISO/IEC 15291:1999 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
- ISO/IEC TR 15294:2000 Information technology – Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- ISO 15296:2004 Gas welding equipment – Vocabulary – Terms used for gas welding equipment
- ISO/TR 15300:2001 Dentistry – Application of OSI clinical codification to the classification and coding of dental products
- ISO/IEC 15307:1997 Information technology – Data interchange on 12.7 mm 128-track magnetic tape cartridges – DLT 4 format
- ISO 15309:2013 Implants for surgery – Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
- ISO/PAS 15339 Graphic technology – Printing from digital data across multiple technologies
- ISO/PAS 15339-1:2015 Part 1: Principles
- ISO/PAS 15339-2:2015 Part 2: Characterized reference printing conditions, CRPC1-CRPC7
- ISO 15367 Lasers and laser-related equipment – Test methods for determination of the shape of a laser beam wavefront
- ISO 15367-1:2003 Part 1: Terminology and fundamental aspects
- ISO 15367-2:2005 Part 2: Shack-Hartmann sensors
- ISO 15368:2001 Optics and optical instruments – Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
- ISO 15374:1998 Implants for surgery – Requirements for production of forgings
- ISO 15375:2010 Medical infusion bottles – Suspension devices for multiple use – Requirements and test methods
- ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices – Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
- ISO 15378:2017 Primary packaging materials for medicinal products – Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
- ISO 15394:2009 Packaging – Bar code and two-dimensional symbols for shipping, transport and receiving labels
- ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
- ISO 15403-1:2006 Part 1: Designation of the quality
- ISO/TR 15403-2:2006 Part 2: Specification of the quality
- ISO/IEC 15404:2000 Information technology – Office machines – Minimum information to be included in specification sheets – Facsimile equipment
- ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
- ISO/IEC 15408-1:2009 Part 1: Introduction and general model
- ISO/IEC 15408-2:2008 Part 2: Security functional components
- ISO/IEC 15408-3:2008 Part 3: Security assurance components
- ISO/IEC TR 15410:1998 Information technology – Telecommunications and information exchange between systems – PISN mobility-general principles and services aspects
- ISO/IEC 15411:1999 Information technology – Segmented keyboard layouts
- ISO/IEC 15412:1999 Information technology – Portable computer keyboard layouts
- ISO/IEC TR 15413:2001 Information technology – Font services – Abstract service definition
- ISO/IEC 15414:2015 Information technology – Open data processing – Reference Model – Enterprise Language
- ISO/IEC 15415:2011 Information technology – Automatic identification and data capture techniques – Bar code symbol print quality test specification – Two-dimensional symbols
- ISO/IEC 15416:2016 Automatic identification and data capture techniques – Bar code print quality test specification – Linear symbols
- ISO/IEC 15417:2007 Information technology – Automatic identification and data capture techniques – Code 128 bar code symbology specification
- ISO/IEC 15418:2016 Information technology – Automatic identification and data capture techniques – GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
- ISO/IEC 15419:2009 Information technology – Automatic identification and data capture techniques – Bar code digital imaging and printing performance testing
- ISO/IEC 15420:2009 Information technology – Automatic identification and data capture techniques – EAN/UPC bar code symbology specification
- ISO/IEC 15421:2010 Information technology – Automatic identification and data capture techniques – Bar code master test specifications
- ISO/IEC 15423:2009 Information technology – Automatic identification and data capture techniques – Bar code scanner and decoder performance testing
- ISO/IEC 15424:2008 Information technology – Automatic identification and data capture techniques – Data Carrier Identifiers (including Symbology Identifiers)
- ISO/IEC 15426 Information technology – Automatic identification and data capture techniques – Bar code verifier conformance specification
- ISO/IEC 15426-1:2006 Part 1: Linear symbols
- ISO/IEC 15426-2:2015 Part 2: Two-dimensional symbols
- ISO/IEC 15428:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exchange additional network feature
- ISO/IEC 15429:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
- ISO/IEC 15430:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless terminal call handling additional network features
- ISO/IEC 15431:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless terminal call handling additional network features
- ISO/IEC 15432:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Authentication supplementary services (WTAT and WTAN)
- ISO/IEC 15433:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Authentication supplementary services
- ISO/IEC 15434:2006 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
- ISO/IEC 15437:2001 Information technology – Enhancements to LOTOS (E-LOTOS)
- ISO/IEC 15438:2015 Information technology – Automatic identification and data capture techniques – PDF417 bar code symbology specification
- ISO/IEC TR 15440:2016 Information technology – Future keyboards and other input devices and entry methods
- ISO/IEC TR 15443 Information technology – Security techniques – Security assurance framework
- ISO/IEC TR 15443-1:2012 Part 1: Introduction and concepts
- ISO/IEC TR 15443-2:2012 Part 2: Analysis
- ISO/IEC 15444 Information technology – JPEG 2000 image coding system
- ISO/IEC 15444-1:2016 Core coding system
- ISO/IEC 15444-2:2004 Extensions
- ISO/IEC 15444-3:2007 Motion JPEG 2000
- ISO/IEC 15444-4:2004 Conformance testing
- ISO/IEC 15444-5:2015 Reference software
- ISO/IEC 15444-6:2013 Part 6: Compound image file format
- ISO/IEC 15444-8:2007 Secure JPEG 2000
- ISO/IEC 15444-9:2005 Interactivity tools, APIs and protocols
- ISO/IEC 15444-10:2011 Extensions for three-dimensional data
- ISO/IEC 15444-11:2007 Wireless
- ISO/IEC 15444-12:2015 Part 12: ISO base media file format [Withdrawn, no replacement]
- ISO/IEC 15444-13:2008 An entry level JPEG 2000 encoder
- ISO/IEC 15444-14:2013 Part 14: XML representation and reference
- ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
- ISO/IEC TR 15446:2009 Information technology – Security techniques – Guide for the production of Protection Profiles and Security Targets
- ISO/IEC 15457 Identification cards – Thin flexible cards
- ISO/IEC 15457-1:2008 Part 1: Physical characteristics
- ISO/IEC 15457-2:2007 Part 2: Magnetic recording technique
- ISO/IEC 15457-3:2008 Part 3: Test methods
- ISO/IEC 15459 Information technology – Automatic identification and data capture techniques – Unique identification
- ISO/IEC 15459-1:2014 Part 1: Individual transport units
- ISO/IEC 15459-2:2015 Part 2: Registration procedures
- ISO/IEC 15459-3:2014 Part 3: Common rules
- ISO/IEC 15459-4:2014 Part 4: Individual products and product packages
- ISO/IEC 15459-5:2014 Part 5: Individual returnable transport items (RTIs)
- ISO/IEC 15459-6:2014 Part 6: Groupings
- ISO 15469:2004 Spatial distribution of daylight – CIE standard general sky
- ISO/IEC 15474 Information technology – CDIF framework
- ISO/IEC 15474-1:2002 Part 1: Overview
- ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility
- ISO/IEC 15475 Information technology – CDIF transfer format
- ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings
- ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1
- ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1
- ISO/IEC 15476 Information technology – CDIF semantic metamodel
- ISO/IEC 15476-1:2002 Part 1: Foundation
- ISO/IEC 15476-2:2002 Part 2: Common
- ISO/IEC 15476-3:2006 Part 3: Data definitions
- ISO/IEC 15476-4:2005 Part 4: Data models
- ISO/IEC 15476-6:2006 Part 6: State/event models
- ISO 15480:2019 Fasteners — Hexagon washer head drilling screws with tapping screw thread
- ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
- ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread
- ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread
- ISO/IEC 15485:1997 Information technology – Data interchange on 120 mm optical disk cartridges using phase change PD format – Capacity: 650 MB per cartridge
- ISO/IEC 15486:1998 Information technology – Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects – Capacity: 2.6 GB per cartridge
- ISO 15489 Information and documentation – Records management
- ISO 15489-1:2016 Part 1: Concepts and principles
- ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement]
- ISO/IEC 15498:1997 Information technology – Data interchange on 90 mm optical disk cartridges – HS-1 format – Capacity: 650 MB per cartridge
- ISO/IEC 15504 Information technology – Process assessment
- ISO/IEC 15505:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Message Waiting Indication supplementary service
- ISO/IEC 15506:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Message Waiting Indication supplementary service
- ISO/IEC 15507:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – PINX clock synchronization
- ISO 15511:2011 Information and documentation – International standard identifier for libraries and related organizations (ISIL)
- ISO 15519 Specification for diagrams for process industry
- ISO 15519-1:2010 Part 1: General rules
- ISO 15519-2:2015 Part 2: Measurement and control
- ISO/IEC 15521:1998 Information technology – 3.81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-3 format using 125 m length tapes
- ISO 15529:2010 Optics and photonics – Optical transfer function – Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
- ISO 15530 Geometrical product specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
- ISO/TS 15530-1:2013 Part 1: Overview and metrological characteristics
- ISO 15530-3:2011 Part 3: Use of calibrated workpieces or measurement standards
- ISO/TS 15530-4:2008 Part 4: Evaluating task-specific measurement uncertainty using simulation
- ISO 15553:2006 Water quality – Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water
- ISO 15583:2005 Ships and marine technology – Maritime standards list
- ISO/TR 15599:2002 Digital codification of dental laboratory procedures
- ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
- ISO 15622:2010 Intelligent transport systems – Adaptive Cruise Control systems – Performance requirements and test procedures
- ISO 15623:2013 Intelligent transport systems – Forward vehicle collision warning systems – Performance requirements and test procedures
- ISO/TS 15624:2001 Transport information and control systems – Traffic Impediment Warning Systems (TIWS) – System requirements
- ISO 15628:2013 Intelligent transport systems – Dedicated short range communication (DSRC) – DSRC application layer
- ISO 15638 Intelligent transport systems – Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV)[Note 4]
- ISO 15638-1:2012 Part 1: Framework and architecture
- ISO 15638-2:2013 Part 2: Common platform parameters using CALM
- ISO 15638-3:2013 Part 3: Operating requirements, ‘Approval Authority’ procedures, and enforcement provisions for the providers of regulated services
- ISO 15638-5:2013 Part 5: Generic vehicle information
- ISO 15638-6:2014 Part 6: Regulated applications
- ISO 15638-7:2013 Part 7: Other applications
- ISO 15638-8:2014 Part 8: Vehicle access management
- ISO/TS 15638-9:2013 Part 9: Remote electronic tachograph monitoring (RTM)
- ISO 15638-10:2017 Part 10: Emergency messaging system/eCall
- ISO 15638-11:2014 Part 11: Driver work records
- ISO 15638-12:2014 Part 12: Vehicle mass monitoring
- ISO/TS 15638-13:2015 Part 13: “Mass” information for jurisdictional control and enforcement
- ISO 15638-14:2014 Part 14: Vehicle access control
- ISO 15638-15:2014 Part 15: Vehicle location monitoring
- ISO 15638-16:2014 Part 16: Vehicle speed monitoring
- ISO 15638-17:2014 Part 17: Consignment and location monitoring
- ISO 15638-18:2017 Part 18: ADR (Dangerous Goods)
- ISO/TS 15638-19:2013 Part 19: Vehicle parking facilities (VPF)
- ISO 15642:2003 Road construction and maintenance equipment – Asphalt mixing plants – Terminology and commercial specifications
- ISO 15662:2006 Intelligent transport systems – Wide area communication – Protocol management information
- ISO 15664:2001 Acoustics – Noise control design procedures for open plant
- ISO 15665:2003 Acoustics – Acoustic insulation for pipes, valves and flanges
- ISO 15667:2000 Acoustics – Guidelines for noise control by enclosures and cabins
- ISO 15674:2016 Cardiovascular implants and artificial organs – Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
- ISO 15675:2016 Cardiovascular implants and artificial organs – Cardiopulmonary bypass systems – Arterial blood line filters
- ISO 15676:2016 Cardiovascular implants and artificial organs – Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
- ISO 15686 Buildings and constructed assets – Service life planning
- ISO 15688:2012 Road construction and maintenance equipment – Soil stabilizers – Terminology and commercial specifications
- ISO 15689:2003 Road construction and maintenance equipment – Powder binder spreaders – Terminology and commercial specifications
- ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
- ISO/TS 15696:2012 Cranes – List of equivalent terms
- ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
- ISO 15707:2001 Information and documentation – International Standard Musical Work Code (ISWC)
- ISO/IEC 15718:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – HH-1 format
- ISO/IEC 15731:1998 Information technology – 12.65 mm wide magnetic tape cassette for information interchange – Helical scan recording – DTF-1 format
- ISO 15744:2002 Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2)
- ISO 15747:2010 Plastic containers for intravenous injections
- ISO 15752:2010 Ophthalmic instruments – Endoilluminators – Fundamental requirements and test methods for optical radiation safety
- ISO/IEC 15757:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – DA-2 format
- ISO 15759:2005 Medical infusion equipment – Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
- ISO/TS 15768:2000 Measurement of liquid velocity in open channels – Design, selection and use of electromagnetic current meters
- ISO 15769:2010 Hydrometry – Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
- ISO/IEC 15771:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Common information additional network feature
- ISO/IEC 15772:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Common Information additional network feature
- ISO/IEC 15773:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
- ISO/IEC 15776:2001 VME64bus – Specification
- ISO/IEC 15780:1998 Information technology – 8 mm wide magnetic tape cartridge – Helical scan recording – AIT-1 format
- ISO 15782 Certificate management for financial services[Note 4]
- ISO 15782-1:2009 Part 1: Public key certificates
- ISO 15782-2:2001 Part 2: Certificate extensions
- ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
- ISO 15784 Intelligent transport systems (ITS) – Data exchange involving roadside modules communication
- ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles
- ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP
- ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX)
- ISO 15785:2002 Technical drawings – Symbolic presentation and indication of adhesive, fold and pressed joints
- ISO 15786:2008 Technical drawings – Simplified representation and dimensioning of holes
- ISO 15787:2016 Technical product documentation – Heat-treated ferrous parts – Presentation and indications
- ISO 15798:2013 Ophthalmic implants – Ophthalmic viscosurgical devices
- ISO/IEC 15802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Common specifications
- ISO/IEC 15802-1:1995 Part 1: Medium Access Control (MAC) service definition
- ISO/IEC 15802-3:1998 Part 3: Media Access Control (MAC) Bridges
- ISO/IEC 15816:2002 Information technology – Security techniques – Security information objects for access control
- ISO 15836:2009 Information and documentation – The Dublin Core metadata element set
- ISO 15836-1:2017 Part 1: Core elements
- ISO/TR 15847:2008 Graphic technology – Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
- ISO 15849:2001 Ships and marine technology – Guidelines for implementation of a fleet management system network
- ISO/IEC 15851:1999 Information technology – Communication protocol – Open MUMPS Interconnect
- ISO/IEC 15852:1999 Information technology – Programming languages – M Windowing API
- ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods – Terminology
- ISO 15870:2000 Powered industrial trucks – Safety signs and hazard pictorials – General principles
- ISO 15878:2008 Road construction and maintenance equipment – Asphalt pavers – Terminology and commercial specifications
- ISO/IEC 15895:1999 Information technology – Data interchange on 12.7 mm 128-track magnetic tape cartridges – DLT 3-XT format
- ISO/IEC 15896:1999 Information technology – Data interchange on 12.7 mm 208-track magnetic tape cartridges – DLT 5 format
- ISO/IEC 15897:2011 Information technology – User interfaces – Procedures for the registration of cultural elements
- ISO 15883-1:2006 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice.
- ISO/IEC 15898:1998 Information technology – Data interchange on 356 mm optical disk cartridges – WORM, using phase change technology – Capacity: 14.8 GB and 25 GB per cartridge
- ISO/IEC 15899:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Service description – Broadband connection oriented bearer services
- ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption
- ISO 15902:2004 Optics and photonics – Diffractive optics – Vocabulary
- ISO/IEC 15909 Systems and software engineering – High-level Petri nets
- ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation
- ISO/IEC 15909-2:2011 Part 2: Transfer format
- ISO 15919:2001 Information and documentation – Transliteration of Devanagari and related Indic scripts into Latin characters
- ISO 15924:2004 Information and documentation – Codes for the representation of names of scripts
- ISO 15926 – Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
- ISO 15927 Hygrothermal performance of buildings – Calculation and presentation of climatic data
- ISO 15927-1:2003 Part 1: Monthly means of single meteorological elements
- ISO 15927-2:2009 Part 2: Hourly data for design cooling load
- ISO 15927-3:2009 Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
- ISO 15927-4:2005 Part 4: Hourly data for assessing the annual energy use for heating and cooling
- ISO 15927-5:2004 Part 5: Data for design heat load for space heating
- ISO 15927-6:2007 Part 6: Accumulated temperature differences (degree-days)
- ISO 15930 Graphic technology – Prepress digital data exchange using PDF[Note 4]
- ISO 15932:2013 Microbeam analysis – Analytical electron microscopy – Vocabulary
- ISO/IEC 15938 Information technology – Multimedia content description interface
- ISO/IEC/IEEE 15939:2017 Systems and software engineering – Measurement process
- ISO/IEC 15940:2013 Systems and software engineering – Software Engineering Environment Services
- ISO/IEC TR 15942:2000 Information technology – Programming languages – Guide for the use of the Ada programming language in high integrity systems
- ISO/IEC 15944 Information technology – Business operational view
- ISO/IEC 15944-1:2011 Part 1: Operational aspects of open-edi for implementation
- ISO/IEC 15944-2:2015 Part 2: Registration of scenarios and their components as business objects
- ISO/IEC 15944-4:2015 Part 4: Business transaction scenarios – Accounting and economic ontology
- ISO/IEC 15944-5:2008 Part 5: Identification and referencing of requirements of jurisdictional domains as sources of external constraints
- ISO/IEC TR 15944-6:2015 Part 6: Technical introduction to e-Business modelling
- ISO/IEC 15944-7:2009 Part 7: eBusiness vocabulary
- ISO/IEC 15944-8:2012 Part 8: Identification of privacy protection requirements as external constraints on business transactions
- ISO/IEC 15944-9:2015 Part 9: Business transaction traceability framework for commitment exchange
- ISO/IEC 15944-10:2013 Part 10: IT-enabled coded domains as semantic components in business transactions
- ISO/IEC 15944-20:2015 Part 20: Linking business operational view to functional service view
- ISO/IEC 15945:2002 Information technology – Security techniques – Specification of TTP services to support the application of digital signatures
- ISO/IEC 15946 Information technology – Security techniques – Cryptographic techniques based on elliptic curves
- ISO/IEC 15946-1:2016 Part 1: General
- ISO/IEC 15946-5:2017 Part 5: Elliptic curve generation
- ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
- ISO/IEC 15953:1999 Information technology – Open Systems Interconnection – Service definition for the Application Service Object Association Control Service Element
- ISO/IEC 15954:1999 Information technology – Open Systems Interconnection – Connection-mode protocol for the Application Service Object Association Control Service Element
- ISO/IEC 15955:1999 Information technology – Open Systems Interconnection – Connectionless protocol for the Application Service Object Association Control Service Element
- ISO/IEC 15961 Information technology – Radio frequency identification (RFID) for item management: Data protocol
- ISO/IEC 15961-1:2013 Part 1: Application interface
- ISO/IEC 15961-4:2016 Part 4: Application interface commands for battery assist and sensor functionality
- ISO/IEC 15962:2013 Information technology – Radio frequency identification (RFID) for item management – Data protocol: data encoding rules and logical memory functions
- ISO/IEC 15963:2009 Information technology – Radio frequency identification for item management – Unique identification for RF tags
- ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
- ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
- ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
- ISO/IEC 15991:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Priority Interruption and Call Priority Interruption Protection supplementary services
- ISO/IEC 15992:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Priority Interruption and Call Priority Interruption Protection supplementary services
- ISO/TR 16015:2003 Geometrical product specifications (GPS) – Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- ISO 16016:2016 Technical product documentation – Protection notices for restricting the use of documents and products
- ISO 16020:2005 Steel for the reinforcement and prestressing of concrete – Vocabulary
- ISO/IEC 16022:2006 Information technology – Automatic identification and data capture techniques – Data Matrix bar code symbology specification
- ISO/IEC 16023:2000 Information technology – International symbology specification – MaxiCode
- ISO 16032:2004 Acoustics – Measurement of sound pressure level from service equipment in buildings – Engineering method
- ISO 16034:2002 Ophthalmic optics – Specifications for single-vision ready-to-wear near- vision spectacles
- ISO 16039:2004 Road construction and maintenance equipment – Slipform pavers – Definitions and commercial specifications
- ISO 16054:2000 Implants for surgery – Minimum data sets for surgical implants
- ISO/TR 16056 Health informatics – Interoperability of telehealth systems and networks
- ISO/TR 16056-1:2004 Part 1: Introduction and definitions
- ISO/TR 16056-2:2004 Part 2: Real-time systems
- ISO/TS 16058:2004 Health informatics – Interoperability of telelearning systems
- ISO 16059:2007 Dentistry – Required elements for codification used in data exchange
- ISO 16061:2015 Instrumentation for use in association with non-active surgical implants – General requirements
- ISO 16063 Methods for the calibration of vibration and shock transducers
- ISO 16063-1:1998 Part 1: Basic concepts
- ISO 16063-11:1999 Part 11: Primary vibration calibration by laser interferometry
- ISO 16063-12:2002 Part 12: Primary vibration calibration by the reciprocity method
- ISO 16063-13:2001 Part 13: Primary shock calibration using laser interferometry
- ISO 16063-15:2006 Part 15: Primary angular vibration calibration by laser interferometry
- ISO 16063-16:2014 Part 16: Calibration by Earth’s gravitation
- ISO 16063-17:2016 Part 17: Primary calibration by centrifuge
- ISO 16063-21:2003 Part 21: Vibration calibration by comparison to a reference transducer
- ISO 16063-22:2005 Part 22: Shock calibration by comparison to a reference transducer
- ISO 16063-31:2009 Part 31: Testing of transverse vibration sensitivity
- ISO 16063-32:2016 Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation
- ISO 16063-33:2017 Part 33: Testing of magnetic field sensitivity
- ISO 16063-41:2011 Part 41: Calibration of laser vibrometers
- ISO 16063-42:2014 Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
- ISO 16063-43:2015 Part 43: Calibration of accelerometers by model-based parameter identification
- ISO 16063-45:2017 Part 45: In-situ calibration of transducers with built in calibration coil
- ISO 16069:2004 Graphical symbols – Safety signs – Safety way guidance systems (SWGS)
- ISO/IEC 16085:2006 Systems and software engineering – Life cycle processes – Risk management
- ISO 16087:2013 Implants for surgery – Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
- ISO 16103:2005 Packaging – Transport packaging for dangerous goods – Recycled plastics material
- ISO 16106:2006 Packaging – Transport packages for dangerous goods – Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings—Guidelines for the application of ISO 9001
- ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
- ISO 16140 Microbiology of the food chain – Method validation
- ISO 16140-1:2016 Part 1: Vocabulary
- ISO 16140-2:2016 Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
- ISO 16142 Medical devices – Recognized essential principles of safety and performance of medical devices
- ISO 16142-1:2016 Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
- ISO 16142-2:2017 Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
- ISO/TR 16153:2004 Piston-operated volumetric instruments – Determination of uncertainty for volume measurements made using the photometric method
- ISO 16155:2006 Ships and marine technology – Computer applications – Shipboard loading instruments
- ISO 16165:2013 Ships and marine technology – Marine environment protection – Terminology relating to oil spill response
- ISO/IEC TR 16166:2010 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Security of session-based communications
- ISO/IEC TR 16167:2011 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Emergency calls
- ISO 16175 Information and documentation – Principles and functional requirements for records in electronic office environments
- ISO 16175-1:2010 Part 1: Overview and statement of principles
- ISO 16175-2:2011 Part 2: Guidelines and functional requirements for digital records management systems
- ISO 16175-3:2010 Part 3: Guidelines and functional requirements for records in business systems
- ISO 16192:2017 Space systems – Experience gained in space projects (lessons learned) – Principles and guidelines
- ISO/TS 16195:2013 Nanotechnologies – Guidance for developing representative test materials consisting of nano-objects in dry powder form
- ISO/TR 16196:2016 Nanotechnologies – Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
- ISO/TR 16197:2014 Nanotechnologies – Compilation and description of toxicological screening methods for manufactured nanomaterials
- ISO 16212:2017 Cosmetics – Microbiology – Enumeration of yeast and mould
- ISO/TR 16218:2013 Packaging and the environment – Processes for chemical recovery
- ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
- ISO 16232-1:2007 Part 1: Vocabulary
- ISO 16232-2:2007 Part 2: Method of extraction of contaminants by agitation
- ISO 16232-3:2007 Part 3: Method of extraction of contaminants by pressure rinsing
- ISO 16232-4:2007 Part 4: Method of extraction of contaminants by ultrasonic techniques
- ISO 16232-5:2007 Part 5: Method of extraction of contaminants on functional test bench
- ISO 16232-6:2007 Part 6: Particle mass determination by gravimetric analysis
- ISO 16232-7:2007 Part 7: Particle sizing and counting by microscopic analysis
- ISO 16232-8:2007 Part 8: Particle nature determination by microscopic analysis
- ISO 16232-9:2007 Part 10: Particle sizing and counting by automatic light extinction particle counter
- ISO 16232-10:2007 Part 10: Expression of results
- ISO 16239:2013 Metric series wires for measuring screw threads
- ISO 16245:2009 Information and documentation – Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents
- ISO 16249:2013 Springs – Symbols
- ISO 16254:2016 Acoustics – Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation – Engineering method
- ISO/IEC 16262:2011 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
- ISO 16269 Statistical interpretation of data
- ISO 16269-4:2010 Part 4: Detection and treatment of outliers
- ISO 16269-6:2014 Part 6: Determination of statistical tolerance intervals
- ISO 16269-7:2001 Part 7: Median – Estimation and confidence intervals
- ISO 16269-8:2004 Part 8: Determination of prediction intervals
- ISO/TS 16277 Health informatics – Categorial structures of clinical findings in traditional medicine
- ISO/TS 16277-1:2015 Part 1: Traditional Chinese, Japanese and Korean medicine
- ISO 16278:2016 Health informatics – Categorial structure for terminological systems of human anatomy
- ISO 16284:2006 Ophthalmic optics – Information interchange for ophthalmic optical equipment
- ISO/TR 16310:2014 Symbol libraries for construction and facilities management
- ISO/IEC 16317:2011 Information technology – Telecommunications and information exchange between systems – proxZzzy for sleeping hosts
- ISO/IEC/IEEE 16326:2009 Systems and software engineering – Life cycle processes – Project management
- ISO 16331 Optics and optical instruments – Laboratory procedures for testing surveying and construction instruments
- ISO 16331-1:2017 Part 1: Performance of handheld laser distance meters
- ISO 16336:2014 Applications of statistical and related methods to new technology and product development process – Robust parameter design (RPD)
- ISO/IEC 16350:2015 Information technology – Systems and software engineering – Application management
- ISO/IEC 16353:2011 Information technology – Telecommunications and information exchange between systems – Front-end configuration command for NFC-WI (NFC-FEC)
- ISO 16355 Applications of statistical and related methods to new technology and product development process
- ISO 16355-1:2015 Part 1: General principles and perspectives of Quality Function Deployment (QFD)
- ISO 16355-2:2017 Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
- ISO 16355-4:2017 Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
- ISO 16355-5:2017 Part 5: Solution strategy
- ISO/TR 16355-8:2017 Part 8: Guidelines for commercialization and life cycle
- ISO/TR 16379:2014 Tissue-engineered medical products – Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
- ISO/IEC 16382:2000 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 6 format
- ISO/IEC 16388:2007 Information technology – Automatic identification and data capture techniques – Code 39 bar code symbology specification
- ISO/IEC 16390:2007 Information technology – Automatic identification and data capture techniques – Interleaved 2 of 5 bar code symbology specification
- ISO/TS 16401 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2
- ISO/TS 16401-1:2012 Part 1: Test suite structure and test purposes
- ISO/TS 16401-2:2012 Part 2: Abstract test suite
- ISO 16402:2008 Implants for surgery – Acrylic resin cement – Flexural fatigue testing of acrylic resin cements used in orthopaedics
- ISO/TS 16407 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1
- ISO/TS 16407-1:2011 Part 1: Test suite structure and test purposes
- ISO/TS 16407-2:2012 Part 2: Abstract test suite
- ISO/TS 16410 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3
- ISO/TS 16410-1:2011 Part 1: Test suite structure and test purposes
- ISO/TS 16410-2:2012 Part 2: Abstract test suite
- ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry – Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
- ISO 16428:2005 Implants for surgery – Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
- ISO 16429:2004 Implants for surgery – Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
- ISO 16437:2012 Ships and marine technology – Lifesaving and fire protection – Atmospheric oil mist detectors for ships
- ISO 16439:2014 Information and documentation – Methods and procedures for assessing the impact of libraries
- ISO 16443:2014 Dentistry – Vocabulary for dental implants systems and related procedure
- ISO/IEC 16448:2002 Information technology – 120 mm DVD – Read-only disk
- ISO/IEC 16449:2002 Information technology – 80 mm DVD – Read-only disk
- ISO 16457:2014 Space systems – Space environment (natural and artificial) – The Earth’s ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
- ISO/TS 16460:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – Communication protocol messages for global usage
- ISO/IEC 16480:2015 Information technology – Automatic identification and data capture techniques – Reading and display of ORM by mobile devices
- ISO 16484 Building automation and control systems (BACS)
- ISO 16484-1:2010 Part 1: Project specification and implementation
- ISO 16484-2:2004 Part 2: Hardware
- ISO 16484-3:2005 Part 3: Functions
- ISO 16484-5:2017 Part 5: Data communication protocol
- ISO 16484-6:2014 Part 6: Data communication conformance testing
- ISO/IEC 16485:2000 Information technology – Mixed Raster Content (MRC)
- ISO 16495:2013 Packaging – Transport packaging for dangerous goods – Test methods
- ISO/IEC 16500 Information technology – Generic digital audio-visual systems
- ISO/IEC 16500-1:1999 Part 1: System reference models and scenarios
- ISO/IEC 16500-2:1999 Part 2: System dynamics, scenarios and protocol requirements
- ISO/IEC 16500-3:1999 Part 3: Contours: Technology domain
- ISO/IEC 16500-4:1999 Part 4: Lower-layer protocols and physical interfaces
- ISO/IEC 16500-5:1999 Part 5: High and mid-layer protocols
- ISO/IEC 16500-6:1999 Part 6: Information representation
- ISO/IEC 16500-7:1999 Part 7: Basic security tools
- ISO/IEC 16500-8:1999 Part 8: Management architecture and protocols
- ISO/IEC 16500-9:1999 Part 9: Usage information protocols
- ISO/IEC TR 16501:1999 Information technology – Generic digital audio-visual systems – Technical Report on ISO/IEC 16500 – Description of digital audio-visual functionalities
- ISO/IEC 16504:2011 Information technology – Telecommunications and information exchange between systems – MAC and PHY for operation in TV white space
- ISO/IEC 16509:1999 Information technology – Year 2000 terminology
- ISO/IEC 16512 Information technology – Relayed multicast protocol
- ISO/IEC 16512-1:2016 Information technology – Relayed Multicast Control Protocol (RMCP) – Framework
- ISO/IEC 16512-2:2016 Information technology – Relayed multicast protocol: Specification for simplex group applications
- ISO/IEC 16513:2005 Information technology – Group management protocol
- ISO/HL7 16527:2016 Health informatics – HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM)
- ISO 16548:2012 Ships and marine technology – Ship design – General guidance on emergency towing procedures
- ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
- ISO/TS 16550:2014 Nanotechnologies – Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
- ISO 16559:2014 Solid biofuels – Terminology, definitions and descriptions
- ISO 16571:2014 Systems for evacuation of plume generated by medical devices
- ISO 16587:2004 Mechanical vibration and shock – Performance parameters for condition monitoring of structures
- ISO 16589 Rotary shaft lip-type seals incorporating thermoplastic sealing elements
- ISO 16589-2:2011 Part 2: Vocabulary
- ISO 16609:2012 Financial services – Requirements for message authentication using symmetric techniques
- ISO 16610 Geometrical product specifications (GPS) – Filtration
- ISO 16612 Graphic technology – Variable printing data exchange
- ISO 16612-1:2005 Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
- ISO 16612-2:2010 Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
- ISO 16613 Graphic technology – Variable content replacement
- ISO 16613-1:2017 Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)
- ISO 16622:2002 Meteorology – Sonic anemometers/thermometers – Acceptance test methods for mean wind measurements
- ISO 16628:2008 Tracheobronchial tubes – Sizing and marking
- ISO 16638 Radiological protection – Monitoring and internal dosimetry for specific materials
- ISO 16638-1:2015 Part 1: Inhalation of uranium compounds
- ISO 16641:2014 Measurement of radioactivity in the environment – Air – Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
- ISO 16642:2017 Computer applications in terminology — Terminological markup framework
- ISO 16649 Microbiology of the food chain – Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli[Note 3]
- ISO 16649-1:2001 Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
- ISO 16649-2:2001 Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
- ISO 16649-3:2015 Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
- ISO 16654:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Escherichia coli O157
- ISO 16671:2015 Ophthalmic implants – Irrigating solutions for ophthalmic surgery
- ISO 16672:2015 Ophthalmic implants – Ocular endotamponades
- ISO 16682:2015 Aerospace series – Terminology for clamping devices
- ISO 16684 Graphic technology – Extensible metadata platform (XMP) specification
- ISO 16684-1:2012 Part 1: Data model, serialization and core properties
- ISO 16684-2:2014 Part 2: Description of XMP schemas using RELAX NG
- ISO/TR 16705:2016 Statistical methods for implementation of Six Sigma – Selected illustrations of contingency table analysis
- ISO 16706:2016 Ships and marine technology – Marine evacuation systems – Load calculations and testing
- ISO 16707:2016 Ships and marine technology – Marine evacuation systems – Determination of capacity
- ISO 16739:2013 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries[1]
- ISO 16739-1:2018 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries — Part 1: Data schema[2]
- ISO 16744:2003 Dentistry — Base metal materials for fixed dental restorations [Withdrawn: replaced with ISO 22674]
- ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
- ISO 16760:2014 Graphic technology – Prepress data exchange – Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows
- ISO/TR 16764:2003 Lifts, escalators and passenger conveyors – Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility
- ISO/TS 16785:2014 Electronic Fee Collection (EFC) – Interface definition between DSRC-OBE and external in-vehicle devices
- ISO/TR 16786:2015 Intelligent transport systems – The use of simulation models for evaluation of traffic management systems – Input parameters and reporting template for simulation of traffic signal control systems
- ISO 16787:2016 Intelligent transport systems – Assisted Parking System (APS) – Performance requirements and test procedures
- ISO/TS 16791:2014 Health informatics – Requirements for international machine-readable coding of medicinal product package identifiers
- ISO 16792:2015 Technical product documentation – Digital product definition data practices
- ISO 16818:2008 Building environment design – Energy efficiency – Terminology
- ISO/IEC 16824:1999 Information technology – 120 mm DVD rewritable disk (DVD-RAM)
- ISO/IEC 16825:1999 Information technology – Case for 120 mm DVD-RAM disks
- ISO 16832:2006 Acoustics – Loudness scaling by means of categories
- ISO 16840 Wheelchair seating
- ISO 16840-1:2006 Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
- ISO/TS 16843 Health informatics – Categorial structures for representation of acupuncture
- ISO/TS 16843-1:2016 Part 1: Acupuncture points
- ISO/TS 16843-2:2015 Part 2: Needling
- ISO 16894:2009 Wood-based panels – Oriented strand board (OSB) – Definitions, classification and specifications
- ISO 16902 Hydraulic fluid power – Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method
- ISO 16902-1:2003 Part 1: Pumps
- ISO 16919:2014 Space data and information transfer systems – Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
- ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations [Withdrawn: replaced by IATF 16949:2016]
- ISO/TS 16951:2004 Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers
- ISO/TS 16955:2016 Prosthetics – Quantification of physical parameters of ankle foot devices and foot units
- ISO/IEC 16963:2017 Information technology – Digitally recorded media for information interchange and storage – Test method for the estimation of lifetime of optical disks for long-term data storage
- ISO/IEC 16969:1999 Information technology – Data interchange on 120 mm optical disk cartridges using +RW format – Capacity: 3,0 Gbytes and 6,0 Gbytes
- ISO 16971:2015 Ophthalmic instruments – Optical coherence tomograph for the posterior segment of the human eye
- ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design
- ISO 17000 – ISO 17999
- [edit]
- ISO/IEC 17000:2004 Conformity assessment – Vocabulary and general principles
- ISO/IEC 17007:2009 Conformity assessment – Guidance for drafting normative documents suitable for use for conformity assessment
- ISO/IEC 17011:2017 Conformity assessment – Requirements for accreditation bodies accrediting conformity assessment bodies
- ISO/IEC 17020:2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection
- ISO/IEC 17021:2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems
- ISO/IEC 17021-1:2015 Part 1: Requirements
- ISO/IEC 17021-2:2016 Part 2: Competence requirements for auditing and certification of environmental management systems
- ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management systems
- ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event sustainability management systems
- ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset management systems
- ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business continuity management systems
- ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety management systems
- ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery management systems
- ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems
- ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management system certification audits
- ISO/IEC 17024:2012 Conformity assessment – General requirements for bodies operating certification of persons
- ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
- ISO/IEC TR 17026:2015 Conformity assessment – Example of a certification scheme for tangible products
- ISO/IEC TS 17027:2014 Conformity assessment – Vocabulary related to competence of persons used for certification of persons
- ISO/IEC TR 17028:2017 Conformity assessment – Guidelines and examples of a certification scheme for services
- ISO/IEC 17029:2019 Conformity assessment — General principles and requirements for validation and verification bodies
- ISO/IEC 17030:2003 Conformity assessment – General requirements for third-party marks of conformity
- ISO/IEC 17033:2019 Ethical claims and supporting information – Principles and requirements
- ISO 17034:2016 General requirements for the competence of reference material producers
- ISO/IEC 17040:2005 Conformity assessment – General requirements for peer assessment of conformity assessment bodies and accreditation bodies
- ISO/IEC 17043:2010 Conformity assessment – General requirements for proficiency testing
- ISO 17049:2013 Accessible design – Application of braille on signage, equipment and appliances
- ISO/IEC 17050:2004 Conformity assessment — Supplier’s declaration of conformity
- ISO/IEC 17050-1:2004 Part 1: General requirements (reviewed and confirmed in 2020) [3]
- ISO/IEC 17050-2:2004 Part 2: Supporting documentation (reviewed and confirmed in 2020) [4]
- ISO/IEC 17065:2012 Conformity assessment—Requirements for bodies certifying products, processes and services
- ISO 17066:2007 Hydraulic tools – Vocabulary
- ISO/IEC 17067:2013 Conformity assessment – Fundamentals of product certification and guidelines for product certification schemes
- ISO/TR 17068:2012 Information and documentation – Trusted third party repository for digital records
- ISO 17075 Leather – Chemical determination of chromium(VI) content in leather
- ISO 17075-1:2017 Part 1: Colorimetric method
- ISO 17075-2:2017 Part 2: Chromatographic method
- ISO 17080:2005 Manually portable agricultural and forestry machines and powered lawn and garden equipment – Design principles for single-panel product safety labels
- ISO 17088:2012 Specifications for compostable plastics
- ISO 17089 Measurement of fluid flow in closed conduits – Ultrasonic meters for gas
- ISO 17089-1:2010 Part 1: Meters for custody transfer and allocation measurement
- ISO 17089-2:2012 Part 2: Meters for industrial applications
- ISO 17090 Health informatics – Public key infrastructure
- ISO 17090-1:2013 Part 1: Overview of digital certificate services
- ISO 17090-2:2015 Part 2: Certificate profile
- ISO 17090-3:2008 Part 3: Policy management of certification authority
- ISO 17090-4:2014 Part 4: Digital Signatures for healthcare documents
- ISO 17090-5:2017 Part 5: Authentication using Healthcare PKI credentials
- ISO/TR 17098:2013 Packaging material recycling – Report on substances and materials which may impede recycling
- ISO 17100:2015 Translation services—Requirements for translation services
- ISO 17115:2007 Health informatics – Vocabulary of compositional terminological systems
- ISO/TS 17117:2002 Health informatics – Controlled health terminology – Structure and high-level indicators
- ISO 17117 Health informatics — Terminological resources
- ISO 17117-1:2018 Part 1: Characteristics
- ISO/TR 17119:2005 Health informatics – Health informatics profiling framework
- ISO 17123 Optics and optical instruments – Field procedures for testing geodetic and surveying instruments
- ISO 17123-1:2014 Part 1: Theory
- ISO 17123-2:2001 Part 2: Levels
- ISO 17123-3:2001 Part 3: Theodolites
- ISO 17123-4:2012 Part 4: Electro-optical distance meters (EDM measurements to reflectors)
- ISO 17123-5:2012 Part 5: Total stations
- ISO 17123-6:2012 Part 6: Rotating lasers
- ISO 17123-7:2005 Part 7: Optical plumbing instruments
- ISO 17123-8:2015 Part 8: GNSS field measurement systems in real-time kinematic (RTK)
- ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems – Cardiovascular absorbable implants
- ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
- ISO 17185 Intelligent transport systems – Public transport user information
- ISO 17185-1:2014 Part 1: Standards framework for public information systems
- ISO/TR 17185-2:2015 Part 2: Public transport data and interface standards catalogue and cross references
- ISO/TR 17185-3:2015 Part 3: Use cases for journey planning systems and their interoperation
- ISO/TS 17187:2013 Intelligent transport systems – Electronic information exchange to facilitate the movement of freight and its intermodal transfer – Governance rules to sustain electronic information exchange methods
- ISO/TS 17200:2013 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements
- ISO 17201 Acoustics – Noise from shooting ranges
- ISO 17201-1:2005 Part 1: Determination of muzzle blast by measurement
- ISO 17201-2:2006 Part 2: Estimation of muzzle blast and projectile sound by calculation
- ISO 17201-3:2010 Part 3: Guidelines for sound propagation calculations
- ISO 17201-4:2006 Part 4: Prediction of projectile sound
- ISO 17201-5:2010 Part 5: Noise management
- ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
- ISO/IEC 17203:2017 Information technology – Open Virtualization Format (OVF) specification
- ISO 17208 Underwater acoustics – Quantities and procedures for description and measurement of underwater sound from ships
- ISO 17208-1:2016 Part 1: Requirements for precision measurements in deep water used for comparison purposes
- ISO 17218:2014 Sterile acupuncture needles for single use
- ISO/TS 17251:2016 Health informatics – Business requirements for a syntax to exchange structured dose information for medicinal products
- ISO 17258:2015 Statistical methods – Six Sigma – Basic criteria underlying benchmarking for Six Sigma in organisations
- ISO 17261:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Intermodal goods transport architecture and terminology
- ISO 17262:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Numbering and data structures
- ISO 17263:2012 Intelligent transport systems – Automatic vehicle and equipment identification – System parameters
- ISO 17264:2009 Intelligent transport systems – Automatic vehicle and equipment identification – Interfaces
- ISO 17267:2009 Intelligent transport systems – Navigation systems – Application programming interface (API)
- ISO/TR 17302:2015 Nanotechnologies – Framework for identifying vocabulary development for nanotechnology applications in human healthcare
- ISO/IEC 17309:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of a circuit mode basic service and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections
- ISO/IEC 17310:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing
- ISO/IEC 17311:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-multiplexing
- ISO 17316:2015 Information and documentation – International standard link identifier (ISLI)
- ISO 17338:2009 Ships and marine technology – Drawings for fire protection – Indications of fire rating by divisions for ships and high-speed craft
- ISO/IEC 17341:2009 Information technology – Data interchange on 120 mm and 80 mm optical disk using +RW format – Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
- ISO/IEC 17342:2004 Information technology – 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW)
- ISO/IEC 17343:2007 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and SIP – Basic services
- ISO/IEC 17344:2009 Information technology – Data interchange on 120 mm and 80 mm optical disk using +R format – Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)
- ISO/IEC 17345:2006 Information technology – Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges – Capacity: 30 Gbytes per Cartridge – First Generation
- ISO/IEC 17346:2005 Information technology – Data interchange on 90 mm optical disk cartridges – Capacity: 1,3 Gbytes per cartridge
- ISO/TR 17350:2013 Direct Marking on Plastic Returnable Transport Items (RTIs)
- ISO 17351:2013 Packaging – Braille on packaging for medicinal products
- ISO 17359:2011 Condition monitoring and diagnostics of machines – General guidelines
- ISO 17361:2017 Intelligent transport systems – Lane departure warning systems – Performance requirements and test procedures
- ISO 17363:2013 Supply chain applications of RFID – Freight containers
- ISO 17364:2013 Supply chain applications of RFID – Returnable transport items (RTIs) and returnable packaging items (RPIs)
- ISO 17365:2013 Supply chain applications of RFID – Transport units
- ISO 17366:2013 Supply chain applications of RFID – Product packaging
- ISO 17367:2013 Supply chain applications of RFID – Product tagging
- ISO 17369:2013 Statistical data and metadata exchange (SDMX)
- ISO/TR 17370:2013 Application Guideline on Data Carriers for Supply Chain Management
- ISO/TR 17384:2008 Intelligent transport systems – Interactive centrally determined route guidance (CDRG) – Air interface message set, contents and format
- ISO 17387:2008 Intelligent transport systems – Lane change decision aid systems (LCDAS) – Performance requirements and test procedures
- ISO 17398:2004 Safety colours and safety signs – Classification, performance and durability of safety signs
- ISO 17410:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of psychrotrophic microorganisms
- ISO/IEC 17417:2011 Information technology – Telecommunications and information exchange between systems – Short Distance Visible Light Communication (SDVLC)
- ISO/TS 17419:2014 Intelligent transport systems – Cooperative systems – Classification and management of ITS applications in a global context
- ISO/TS 17423:2014 Intelligent transport systems – Cooperative systems – ITS application requirements and objectives for selection of communication profiles
- ISO/TR 17424:2015 Intelligent transport systems – Cooperative systems – State of the art of Local Dynamic Maps concepts
- ISO/TS 17425:2016 Intelligent transport systems – Cooperative systems – Data exchange specification for in-vehicle presentation of external road and traffic related data
- ISO/TS 17426:2016 Intelligent transport systems – Cooperative systems – Contextual speeds
- ISO 17427 Intelligent transport systems – Cooperative ITS[Note 3]
- ISO/TS 17427:2014 Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems
- ISO/TR 17427-2:2015 Part 2: Framework overview
- ISO/TR 17427-3:2015 Part 3: Concept of operations (ConOps) for ‘core’ systems
- ISO/TR 17427-4:2015 Part 4: Minimum system requirements and behaviour for core systems
- ISO/TR 17427-6:2015 Part 6: ‘Core system’ risk assessment methodology
- ISO/TR 17427-7:2015 Part 7: Privacy aspects
- ISO/TR 17427-8:2015 Part 8: Liability aspects
- ISO/TR 17427-9:2015 Part 9: Compliance and enforcement aspects
- ISO/TR 17427-10:2015 Part 10: Driver distraction and information display
- ISO/TS 17429:2017 Intelligent transport systems – Cooperative ITS – ITS station facilities for the transfer of information between ITS stations
- ISO 17432:2004 Health informatics – Messages and communication – Web access to DICOM persistent objects
- ISO 17438 Intelligent transport systems – Indoor navigation for personal and vehicle ITS station
- ISO 17438-1:2016 Part 1: General information and use case definition
- ISO/TS 17439:2014 Health informatics – Development of terms and definitions for health informatics glossaries
- ISO 17442:2012 Financial services – Legal Entity Identifier (LEI)
- ISO/TS 17444 Electronic fee collection – Charging performance
- ISO/TS 17444-1:2017 Part 1: Metrics
- ISO/TS 17444-2:2017 Part 2: Examination framework
- ISO 17450 Geometrical product specifications (GPS) – Basic concepts[Note 3]
- ISO 17450-1:2011 Part 1: Model for geometrical specification and verification
- ISO 17450-2:2012 Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
- ISO 17450-3:2016 Part 3: Toleranced features
- ISO 17450-4:2017 Part 4: Geometrical characteristics for quantifying GPS deviations
- ISO 17451 Packaging – Codification of contents for inventories for shipments of household goods and personal effects
- ISO 17451-1:2016 Part 1: Numeric codification of inventories
- ISO/TS 17451-2:2017 Part 2: XML messaging structure for electronic transmission of inventory data
- ISO/TR 17452:2007 Intelligent transport systems – Using UML for defining and documenting ITS/TICS interfaces
- ISO/IEC 17462:2000 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-4 format
- ISO/TR 17465 Intelligent transport systems – Cooperative ITS
- ISO/TR 17465-1:2014 Part 1: Terms and definitions
- ISO/TR 17465-2:2015 Part 2: Guidelines for standards documents
- ISO/TR 17465-3:2015 Part 3: Release procedures for standards documents
- ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
- ISO 17468:2016 Microbiology of the food chain – Technical requirements and guidance on establishment or revision of a standardized reference method
- ISO 17469 Document management – Strategy markup language (StratML)
- ISO 17469-1:2015 Part 1: StratML core elements
- ISO 17480:2015 Packaging – Accessible design – Ease of opening
- ISO 17488:2016 Road vehicles – Transport information and control systems – Detection-response task (DRT) for assessing attentional effects of cognitive load in driving
- ISO/TS 17503:2015 Statistical methods of uncertainty evaluation – Guidance on evaluation of uncertainty using two-factor crossed designs
- ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
- ISO 17510:2015 Medical devices – Sleep apnoea breathing therapy – Masks and application accessories
- ISO 17515 Intelligent transport systems – Communications access for land mobiles (CALM) – Evolved universal terrestrial radio access network (E-UTRAN)
- ISO 17515-1:2015 Part 1: General usage
- ISO 17516:2014 Cosmetics – Microbiology – Microbiological limits
- ISO/TR 17522:2015 Health informatics – Provisions for health applications on mobile/smart devices
- ISO 17523:2016 Health informatics – Requirements for electronic prescriptions
- ISO 17526:2003 Optics and optical instruments – Lasers and laser-related equipment – Lifetime of lasers
- ISO 17532:2007 Stationary equipment for agriculture – Data communications network for livestock farming
- ISO 17534 Acoustics – Software for the calculation of sound outdoors
- ISO 17534-1:2015 Part 1: Quality requirements and quality assurance
- ISO/TR 17534-2:2014 Part 2: General recommendations for test cases and quality assurance interface
- ISO/TR 17534-3:2015 Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
- ISO/IEC 17549 Information technology – User interface guidelines on menu navigation
- ISO/IEC 17549-2:2015 Part 2: Navigation with 4-direction devices
- ISO/IEC 17568:2013 Information technology – Telecommunications and information exchange between systems – Close proximity electric induction wireless communications
- ISO 17572 Intelligent transport systems (ITS) – Location referencing for geographic databases
- ISO 17572-1:2015 Part 1: General requirements and conceptual model
- ISO 17572-2:2015 Part 2: Pre-coded location references (pre-coded profile)
- ISO 17572-3:2015 Part 3: Dynamic location references (dynamic profile)
- ISO 17573:2010 Electronic fee collection – Systems architecture for vehicle-related tolling
- ISO/TS 17574:2017 Electronic fee collection – Guidelines for security protection profiles
- ISO 17575 Electronic fee collection – Application interface definition for autonomous systems
- ISO 17575-1:2016 Part 1: Charging
- ISO 17575-2:2016 Part 2: Communication and connection to the lower layers
- ISO 17575-3:2016 Part 3: Context data
- ISO/TS 17582:2014 Quality management systems – Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government
- ISO/IEC 17592:2004 Information technology – 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)
- ISO/IEC 17594:2004 Information technology – Cases for 120 mm and 80 mm DVD-RAM disks
- ISO 17599:2015 Technical product documentation (TPD) – General requirements of digital mock-up for mechanical products
- ISO 17604:2015 Microbiology of the food chain – Carcass sampling for microbiological analysis
- ISO 17631:2002 Ships and marine technology – Shipboard plans for fire protection, life-saving appliances and means of escape
- ISO 17658:2002 Welding – Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts – Terminology
- ISO 17659:2002 Welding – Multilingual terms for welded joints with illustrations
- ISO 17677 Resistance welding – Vocabulary
- ISO 17677-1:2009 Part 1: Spot, projection and seam welding
- ISO 17679:2016 Tourism and related services – Wellness spa – Service requirements
- ISO 17680:2015 Tourism and related services – Thalassotherapy – Service requirements
- ISO 17687:2007 Transport Information and Control Systems (TICS) – General fleet management and commercial freight operations – Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation
- ISO 17712:2103 Freight containers — Mechanical seals – updated the 2010 version: offers “a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce”.[5] Supported by C-TPAT (the use of “H” class seals is required).[6]
- ISO 17713 Meteorology – Wind measurements
- ISO 17713-1:2007 Part 1: Wind tunnel test methods for rotating anemometer performance
- ISO 17714:2007 Meteorology – Air temperature measurements – Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- ISO 17717:2017 Meteorological balloons – Specification
- ISO 17724:2003 Graphical symbols – Vocabulary
- ISO/TS 17728:2015 Microbiology of the food chain – Sampling techniques for microbiological analysis of food and feed samples
- ISO 17740 Building construction machinery and equipment – Concrete placing systems for stationary equipment
- ISO 17740-1:2015 Part 1: Terminology and commercial specifications
- ISO/IEC 17760 Information technology – AT Attachment[Note 3]
- ISO/IEC 17760-101:2015 Part 101: ATA/ATAPI Command Set (ATA8-ACS)
- ISO/IEC 17760-102:2016 Part 102: ATA/ATAPI Command set – 2 (ACS-2)
- ISO 17772 Energy performance of buildings – Indoor environmental quality
- ISO 17772-1:2017 Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
- ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
- ISO/IEC 17788:2014 Information technology – Cloud computing – Overview and vocabulary
- ISO/IEC 17789:2014 Information technology – Cloud computing – Reference architecture
- ISO/TR 17791:2013 Health informatics – Guidance on standards for enabling safety in health software
- ISO 17799 Information technology – Security techniques – Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
- ISO 17800 Building environment design – Facility Smart Grid Information Model
- ISO/IEC 17811 Information technology – Device control and management
- ISO/IEC 17811-1:2014 Part 1: Architecture
- ISO/IEC 17811-2:2015 Part 2: Specification of Device Control and Management Protocol
- ISO/IEC 17811-3:2014 Part 3: Specification of Reliable Message Delivery Protocol
- ISO/IEC 17821:2015 Information technology – Specification of low power wireless mesh network over channel-hopped TDMA links
- ISO/TS 17822 In vitro diagnostic test systems – Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens
- ISO/TS 17822-1:2014 Part 1: General requirements, terms and definitions
- ISO/IEC 17825:2016 Information technology – Security techniques – Testing methods for the mitigation of non-invasive attack classes against cryptographic modules
- ISO/IEC 17826:2016 Information technology – Cloud Data Management Interface (CDMI)
- ISO/IEC 17839 Information technology – Identification cards – Biometric System-on-Card[Note 3]
- ISO/IEC 17839-1:2014 Part 1: Core requirements
- ISO/IEC 17839-2:2015 Part 2: Physical characteristics
- ISO/IEC 17839-3:2016 Part 3: Logical information interchange mechanism
- ISO 17853:2011 Wear of implant materials – Polymer and metal wear particles – Isolation and characterization
- ISO/TS 17863:2013 Geometrical product specification (GPS) – Tolerancing of moveable assemblies
- ISO/TS 17865:2016 Geometrical product specifications (GPS) – Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
- ISO/IEC 17875:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Registration supplementary service
- ISO/IEC 17876:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol—Private User Mobility (PUM) – Registration supplementary service
- ISO/IEC 17877:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Call handling additional network features
- ISO/IEC 17878:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Private User Mobility (PUM) – Call handling additional network features
- ISO 17893:2004 Steel wire ropes – Vocabulary, designation and classification
- ISO 17894:2005 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
- ISO 17901 Optics and photonics – Holography
- ISO 17901-1:2015 Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms
- ISO 17901-2:2015 Part 2: Methods for measurement of hologram recording characteristics
- ISO 17907:2014 Ships and marine technology – Single point mooring arrangements for conventional tankers
- ISO/IEC 17913:2000 Information technology – 12,7mm 128-track magnetic tape cartridge for information interchange – Parallel serpentine format
- ISO/TS 17915:2013 Optics and photonics – Measurement method of semiconductor lasers for sensing
- ISO/TS 17919:2013 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of botulinum type A, B, E and F neurotoxin-producing clostridia
- ISO 17933:2000 GEDI – Generic Electronic Document Interchange
- ISO/TS 17938:2014 Health informatics – Semantic network framework of traditional Chinese medicine language system
- ISO 17937:2015 Dentistry – Osteotome
- ISO/TS 17948:2014 Health informatics – Traditional Chinese medicine literature metadata
- ISO/IEC 17960:2015 Information technology – Programming languages, their environments and system software interfaces – Code signing for source code
- ISO/IEC TS 17961:2013 Information technology – Programming languages, their environments and system software interfaces – C secure coding rules
- ISO/IEC 17963:2013 Web Services for Management (WS-Management) Specification
- ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries – Guidelines on competency for personnel
- ISO 17972 Graphic technology – Colour data exchange format (CxF/X)[Note 3]
- ISO 17972-1:2015 Part 1: Relationship to CxF3 (CxF/X)
- ISO 17972-2:2016 Part 2: Scanner target data (CxF/X-2)
- ISO 17972-3:2017 Part 3: Output target data (CxF/X-3)
- ISO 17972-4:2015 Part 4: Spot colour characterisation data (CxF/X-4)
- ISO/TS 17975:2015 Health informatics – Principles and data requirements for consent in the Collection, Use or Disclosure of personal health information
- ISO/IEC 17982:2012 Information technology – Telecommunications and information exchange between systems – Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
- ISO 17987 Road vehicles – Local Interconnect Network (LIN)
- ISO 17987-2:2016 Part 2: Transport protocol and network layer services
- ISO 17994:2014 Water quality – Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- ISO 17995:2005 Water quality – Detection and enumeration of thermotolerant Campylobacter species
- ISO/IEC 17998:2012 Information technology – SOA Governance Framework
- ISO/IEC 18000 Information technology – Radio frequency identification for item management
- ISO/IEC 18004:2015 Information technology – Automatic identification and data capture techniques – QR Code bar code symbology specification
- ISO/IEC 18009:1999 Information technology – Programming languages – Ada: Conformity assessment of a language processor
- ISO/IEC 18010:2002 Information technology – Pathways and spaces for customer premises cabling
- ISO/IEC 18012 Information technology – Home Electronic System – Guidelines for product interoperability
- ISO/IEC 18012-1:2004 Part 1: Introduction
- ISO/IEC 18012-2:2012 Part 2: Taxonomy and application interoperability model
- ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
- ISO/IEC 18013-1:2005 Part 1: Physical characteristics and basic data set
- ISO/IEC 18013-2:2008 Part 2: Machine-readable technologies
- ISO/IEC 18013-3:2017 Part 3: Access control, authentication and integrity validation
- ISO/IEC 18013-4:2019 Part 4: Test methods
- ISO/IEC 18013-5 Part 5: Mobile driving licence (mDL) application
- ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
- ISO/IEC TR 18015:2006 Information technology – Programming languages, their environments and system software interfaces – Technical Report on C++ Performance
- ISO/IEC TR 18016:2003 Information technology – Message Handling Systems (MHS): Interworking with Internet e-mail
- ISO/IEC 18017:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of Virtual Private Network scenarios
- ISO/IEC TR 18018:2010 Information technology – Systems and software engineering – Guide for configuration management tool capabilities
- ISO/IEC 18021:2002 Information technology – User interfaces for mobile tools for management of database communications in a client-server model
- ISO/IEC 18023 Information technology – SEDRIS
- ISO/IEC 18023-1:2006 Part 1: Functional specification
- ISO/IEC 18023-2:2006 Part 2: Abstract transmittal format
- ISO/IEC 18023-3:2006 Part 3: Transmittal format binary encoding
- ISO/IEC 18024 Information technology – SEDRIS language bindings
- ISO/IEC 18024-4:2006 Part 4: C
- ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
- ISO/IEC 18026:2009 Information technology – Spatial Reference Model (SRM)
- ISO/IEC 18031:2011 Information technology – Security techniques – Random bit generation
- ISO/IEC 18032:2005 Information technology – Security techniques – Prime number generation
- ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
- ISO/IEC 18033-1:2015 Part 1: General
- ISO/IEC 18033-2:2006 Part 2: Asymmetric ciphers
- ISO/IEC 18033-3:2010 Part 3: Block ciphers
- ISO/IEC 18033-4:2011 Part 4: Stream ciphers
- ISO/IEC 18033-5:2015 Part 5: Identity-based ciphers
- ISO/IEC 18035:2003 Information technology – Icon symbols and functions for controlling multimedia software applications
- ISO/IEC 18036:2003 Information technology – Icon symbols and functions for World Wide Web browser toolbars
- ISO/IEC TR 18037:2008 Programming languages – C – Extensions to support embedded processors
- ISO/IEC 18041 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings
- ISO/IEC 18041-4:2016 Part 4: C
- ISO/IEC 18042 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings
- ISO/IEC 18042-4:2006 Part 4: C
- ISO/IEC 18045:2008 Information technology – Security techniques – Methodology for IT security evaluation
- ISO/IEC 18046 Information technology – Radio frequency identification device performance test methods
- ISO/IEC 18046-1:2011 Part 1: Test methods for system performance
- ISO/IEC 18046-2:2011 Part 2: Test methods for interrogator performance
- ISO/IEC 18046-3:2012 Part 3: Test methods for tag performance
- ISO/IEC 18046-4:2015 Part 4: Test methods for performance of RFID gates in libraries
- ISO/IEC 18047 Information technology – Radio frequency identification device conformance test methods
- ISO/IEC 18047-2:2012 Part 2: Test methods for air interface communications below 135 kHz
- ISO/IEC TR 18047-3:2011 Part 3: Test methods for air interface communications at 13,56 MHz
- ISO/IEC TR 18047-4:2004 Part 4: Test methods for air interface communications at 2,45 GHz
- ISO/IEC 18047-6:2012 Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
- ISO/IEC TR 18047-7:2010 Part 7: Test methods for active air interface communications at 433 MHz
- ISO/IEC 18050:2006 Information technology – Office equipment – Print quality attributes for machine readable Digital Postage Marks
- ISO/IEC 18051:2012 Information technology – Telecommunications and information exchange between systems – Services for Computer Supported Telecommunications Applications (CSTA) Phase III
- ISO/IEC 18052:2012 Information technology – Telecommunications and information exchange between systems – ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III
- ISO/IEC TR 18053:2000 Information technology – Telecommunications and information exchange between systems – Glossary of definitions and terminology for Computer Supported Telecommunications Applications (CSTA) Phase III
- ISO/IEC 18056:2012 Information technology – Telecommunications and information exchange between systems – XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase III
- ISO/IEC TR 18057:2004 Information technology – Telecommunications and information exchange between systems – Using ECMA-323 (CSTA XML) in a Voice Browser Environment
- ISO/TS 18062:2016 Health informatics – Categorial structure for representation of herbal medicaments in terminological systems
- ISO 18064:2014 Thermoplastic elastomers – Nomenclature and abbreviated terms
- ISO 18065:2015 Tourism and related services – Tourist services for public use provided by Natural Protected Areas Authorities – Requirements
- ISO 18082:2014 Anaesthetic and respiratory equipment – Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
- ISO 18091:2014 Quality management systems – Guidelines for the application of ISO 9001:2008 in local government
- ISO/IEC 18092:2013 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
- ISO/IEC 18093:1999 Information technology – Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects – Capacity: 5,2 Gbytes per cartridge
- ISO 18104:2014 Health informatics – Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems
- ISO/TS 18110:2015 Nanotechnologies – Vocabularies for science, technology and innovation indicators
- ISO 18115 Surface chemical analysis – Vocabulary
- ISO 18115-1:2013 Part 1: General terms and terms used in spectroscopy
- ISO 18115-2:2013 Part 2: Terms used in scanning-probe microscopy
- ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
- ISO 18118:2004 Surface chemical analysis – Auger electron spectroscopy and X-ray photoelectron spectroscopy – Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
- ISO/IEC TR 18120:2016 Information technology – Learning, education, and training – Requirements for e-textbooks in education
- ISO/IEC TR 18121:2015 Information technology – Learning, education and training – Virtual experiment framework
- ISO/TR 18128:2014 Information and documentation – Risk assessment for records processes and systems
- ISO 18129:2015 Condition monitoring and diagnostics of machines – Approaches for performance diagnosis
- ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
- ISO 18158:2016 Workplace air – Terminology
- ISO/TS 18173:2005 Non-destructive testing – General terms and definitions
- ISO/IEC 18180:2013 Information technology – Specification for the Extensible Configuration Checklist Description Format (XCCDF) Version 1.2
- ISO/IEC 18181 Information technology — JPEG XL image coding system
- ISO/IEC 18181-1:2022 Part 1: Core coding system
- ISO/IEC 18181-2:2021 Part 2: File format
- ISO 18185 Freight containers – Electronic seals
- ISO 18189:2016 Ophthalmic optics – Contact lenses and contact lens care products – Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions
- ISO 18190:2016 Anaesthetic and respiratory equipment – General requirements for airways and related equipment
- ISO 18192 Implants for surgery – Wear of total intervertebral spinal disc prostheses
- ISO 18192-1:2011 Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
- ISO 18192-2:2010 Part 2: Nucleus replacements
- ISO 18192-3:2017 Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions
- ISO/TR 18196:2016 Nanotechnologies – Measurement technique matrix for the characterization of nano-objects
- ISO 18215:2015 Ships and marine technology – Vessel machinery operations in polar waters – Guidelines
- ISO 18232:2006 Health Informatics – Messages and communication – Format of length limited globally unique string identifiers
- ISO/TS 18234 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format
- ISO/TS 18234-1:2013 Part 1: Introduction, numbering and versions (TPEG1-INV)
- ISO/TS 18234-2:2013 Part 2: Syntax, semantics and framing structure (TPEG1-SSF)
- ISO/TS 18234-3:2013 Part 3: Service and network information (TPEG1-SNI)
- ISO/TS 18234-4:2006 Part 4: Road Traffic Message (RTM) application
- ISO/TS 18234-5:2006 Part 5: Public Transport Information (PTI) application
- ISO/TS 18234-6:2006 Part 6: Location referencing applications
- ISO/TS 18234-7:2013 Part 7: Parking information (TPEG1-PKI)
- ISO/TS 18234-8:2012 Part 8: Congestion and Travel Time application (TPEG1-CTT)
- ISO/TS 18234-9:2013 Part 9: Traffic event compact (TPEG1-TEC)
- ISO/TS 18234-10:2013 Part 10: Conditional access information (TPEG1-CAI)
- ISO/TS 18234-11:2013 Part 11: Location Referencing Container (TPEG1-LRC)
- ISO 18241:2016 Cardiovascular implants and extracorporeal systems – Cardiopulmonary bypass systems – Venous bubble traps
- ISO 18242:2016 Cardiovascular implants and extracorporeal systems – Centrifugal blood pumps
- ISO 18245:2003 Retail financial services – Merchant category codes
- ISO 18259:2014 Ophthalmic optics – Contact lens care products – Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms
- ISO/IEC TR 18268:2013 Identification cards – Contactless integrated circuit cards – Proximity cards – Multiple PICCs in a single PCD field
- ISO 18295 Customer contact centres
- ISO 18295-1:2017 Part 1: Requirements for customer contact centres
- ISO 18295-2:2017 Part 2: Requirements for clients using the services of customer contact centres
- ISO/IEC 18305:2016 Information technology – Real time locating systems – Test and evaluation of localization and tracking systems
- ISO/TR 18307:2001 Health informatics – Interoperability and compatibility in messaging and communication standards – Key characteristics
- ISO 18308:2011 Health informatics – Requirements for an electronic health record architecture
- ISO 18312 Mechanical vibration and shock – Measurement of vibration power flow from machines into connected support structures
- ISO 18312-1:2012 Part 1: Direct method
- ISO 18312-2:2012 Part 2: Indirect method
- ISO/TR 18317:2017 Intelligent transport systems – Pre-emption of ITS communication networks for disaster and emergency communication – Use case scenarios
- ISO 18322:2017 Space systems – General management requirements for space test centres
- ISO/IEC 18328 Identification cards – ICC-managed devices
- ISO/IEC 18328-1:2015 Part 1: General framework
- ISO/IEC 18328-2:2015 Part 2: Physical characteristics and test methods for cards with devices
- ISO/IEC 18328-3:2016 Part 3: Organization, security and commands for interchange
- ISO/TS 18339:2015 Endotherapy devices – Eyepiece cap and light guide connector
- ISO/TS 18340:2015 Endoscopes – Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves
- ISO/TS 18344:2016 Effectiveness of paper deacidification processes
- ISO 18365:2013 Hydrometry – Selection, establishment and operation of a gauging station
- ISO/IEC 18367:2016 Information technology – Security techniques – Cryptographic algorithms and security mechanisms conformance testing
- ISO 18369 Ophthalmic optics – Contact lenses
- ISO 18369-1:2017 Part 1: Vocabulary, classification system and recommendations for labelling specifications
- ISO 18369-2:2017 Part 2: Tolerances
- ISO 18369-3:2017 Part 3: Measurement methods
- ISO 18369-4:2017 Part 4: Physicochemical properties of contact lens materials
- ISO/IEC 18370 Information technology – Security techniques – Blind digital signatures
- ISO/IEC 18370-1:2016 Part 1: General
- ISO/IEC 18370-2:2016 Part 2: Discrete logarithm based mechanisms
- ISO/IEC 18372:2004 Information technology – RapidIO interconnect specification
- ISO/TR 18476:2017 Ophthalmic optics and instruments – Free form technology – Spectacle lenses and measurement
- ISO/IEC 18384 Information technology – Reference Architecture for Service Oriented Architecture (SOA RA)
- ISO/IEC 18384-1:2016 Part 1: Terminology and concepts for SOA
- ISO/IEC 18384-2:2016 Part 2: Reference Architecture for SOA Solutions
- ISO/IEC 18384-3:2016 Part 3: Service Oriented Architecture ontology
- ISO 18385:2016 Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes – Requirements
- ISO 18388:2016 Technical product documentation (TPD) – Relief grooves – Types and dimensioning
- ISO 18391:2016 Geometrical product specifications (GPS) – Population specification
- ISO/TR 18401:2017 Nanotechnologies – Plain language explanation of selected terms from the ISO/IEC 80004 series
- ISO 18404:2015 Quantitative methods in process improvement – Six Sigma – Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
- ISO 18405:2017 Underwater acoustics – Terminology
- ISO 18406:2017 Underwater acoustics – Measurement of radiated underwater sound from percussive pile driving
- ISO 18414:2006 Acceptance sampling procedures by attributes – Accept-zero sampling system based on credit principle for controlling outgoing quality
- ISO 18415:2017 Cosmetics – Microbiology – Detection of specified and non-specified microorganisms
- ISO 18416:2015 Cosmetics – Microbiology – Detection of Candida albicans
- ISO 18431 Mechanical vibration and shock – Signal processing
- ISO 18431-1:2005 Part 1: General introduction
- ISO 18431-2:2004 Part 2: Time domain windows for Fourier Transform analysis
- ISO 18431-3:2014 Part 3: Methods of time-frequency analysis
- ISO 18431-4:2007 Part 4: Shock-response spectrum analysis
- ISO 18434 Condition monitoring and diagnostics of machines – Thermography
- ISO 18434-1:2008 Part 1: General procedures
- ISO 18436 Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel
- ISO 18436-1:2012 Part 1: Requirements for assessment bodies and the assessment process
- ISO 18436-2:2014 Part 2: Vibration condition monitoring and diagnostics
- ISO 18436-3:2012 Part 3: Requirements for training bodies and the training process
- ISO 18436-4:2014 Part 4: Field lubricant analysis
- ISO 18436-5:2012 Part 5: Lubricant laboratory technician/analyst
- ISO 18436-6:2014 Part 6: Acoustic emission
- ISO 18436-7:2014 Part 7: Thermography
- ISO 18436-8:2013 Part 8: Ultrasound
- ISO 18437 Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials
- ISO 18437-1:2012 Part 1: Principles and guidelines
- ISO 18437-2:2005 Part 2: Resonance method
- ISO 18437-3:2005 Part 3: Cantilever shear beam method
- ISO 18437-4:2008 Part 4: Dynamic stiffness method
- ISO 18437-5:2011 Part 5: Poisson ratio based on comparison between measurements and finite element analysis
- ISO/IEC 18450:2013 Information technology – Telecommunications and information exchange between systems – Web Services Description Language (WSDL) for CSTA Phase III
- ISO 18451 Pigments, dyestuffs and extenders – Terminology
- ISO 18451-1:2015 Part 1: General terms
- ISO 18457:2016 Biomimetics – Biomimetic materials, structures and components
- ISO 18458:2015 Biomimetics – Terminology, concepts and methodology
- ISO 18459:2015 Biomimetics – Biomimetic structural optimization
- ISO 18461:2016 International museum statistics
- ISO 18465:2017 Microbiology of the food chain – Quantitative determination of emetic toxin (cereulide) using LC-MS/MS
- ISO/IEC 18477 Information technology – Scalable compression and coding of continuous-tone still images
- ISO/IEC 18477-1:2015 Part 1: Scalable compression and coding of continuous-tone still images
- ISO/IEC 18477-2:2016 Part 2: Coding of high dynamic range images
- ISO/IEC 18477-3:2015 Part 3: Box file format
- ISO/IEC 18477-6:2016 Part 6: IDR Integer Coding
- ISO/IEC 18477-7:2017 Part 7: HDR Floating-Point Coding
- ISO/IEC 18477-8:2016 Part 8: Lossless and near-lossless coding
- ISO/IEC 18477-9:2016 Part 9: Alpha channel coding
- ISO 18490:2015 Non-destructive testing – Evaluation of vision acuity of NDT personnel
- ISO 18495 Intelligent transport systems – Commercial freight – Automotive visibility in the distribution supply chain
- ISO 18495-1:2016 Part 1: Architecture and data definitions
- ISO/IEC TS 18508:2015 Information technology – Additional Parallel Features in Fortran
- ISO 18513:2003 Tourism services – Hotels and other types of tourism accommodation – Terminology
- ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
- ISO/TS 18530:2014 Health Informatics – Automatic identification and data capture marking and labelling – Subject of care and individual provider identification
- ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
- ISO 18541 Road vehicles – Standardized access to automotive repair and maintenance information (RMI)
- ISO 18542 Road vehicles – Standardized repair and maintenance information (RMI) terminology
- ISO 18542-1:2012 Part 1: General information and use case definition
- ISO 18542-2:2014 Part 2: Standardized process implementation requirements, Registration Authority
- ISO 18562 Biocompatibility evaluation of breathing gas pathways in healthcare applications
- ISO 18562-1:2017 Part 1: Evaluation and testing within a risk management process
- ISO 18562-2:2017 Part 2: Tests for emissions of particulate matter
- ISO 18562-3:2017 Part 3: Tests for emissions of volatile organic compounds (VOCs)
- ISO 18562-4:2017 Part 4: Tests for leachables in condensate
- ISO 18564:2016 Machinery for forestry – Noise test code
- ISO/IEC 18584:2015 Information technology – Identification cards – Conformance test requirements for on-card biometric comparison applications
- ISO 18587:2017 Translation services – Post-editing of machine translation output – Requirements
- ISO 18589 Measurement of radioactivity in the environment – Soil
- ISO 18589-1:2005 Part 1: General guidelines and definitions
- ISO 18589-2:2015 Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- ISO 18589-3:2015 Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry
- ISO 18589-4:2009 Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry
- ISO 18589-5:2009 Part 5: Measurement of strontium 90
- ISO 18589-6:2009 Part 6: Measurement of gross alpha and gross beta activities
- ISO 18589-7:2013 Part 7: In situ measurement of gamma-emitting radionuclides
- ISO 18593:2004 Microbiology of food and animal feeding stuffs – Horizontal methods for sampling techniques from surfaces using contact plates and swabs
- ISO/IEC 18598:2016 Information technology – Automated infrastructure management (AIM) systems – Requirements, data exchange and applications
- ISO 18600:2015 Textile machinery and accessories – Web roller cards – Terms and definitions
- ISO 18601:2013 Packaging and the environment – General requirements for the use of ISO standards in the field of packaging and the environment
- ISO 18602:2013 Packaging and the environment—Optimization of the packaging system
- ISO 18603:2013 Packaging and the environment—Reuse
- ISO 18604:2013 Packaging and the environment—Material recycling
- ISO 18605:2013 Packaging and the environment—Energy recovery
- ISO 18606:2013 Packaging and the environment—Organic recycling
- ISO/TS 18614:2016 Packaging – Label material – Required information for ordering and specifying self-adhesive labels
- ISO 18619:2015 Image technology colour management – Black point compensation
- ISO 18626:2017 Information and documentation – Interlibrary Loan Transactions
- ISO 18629 Industrial automation systems and integration – Process specification language
- ISO/TR 18637:2016 Nanotechnologies – Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs)
- ISO/TR 18638:2017 Health informatics – Guidance on health information privacy education in healthcare organizations
- ISO 18649:2004 Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges
- ISO 18650 Building construction machinery and equipment – Concrete mixers
- ISO 18650-1:2004 Part 1: Vocabulary and general specifications
- ISO/IEC TS 18661 Information technology – Programming languages, their environments, and system software interfaces – Floating-point extensions for C
- ISO/IEC TS 18661-1:2014 Part 1: Binary floating-point arithmetic
- ISO/IEC TS 18661-2:2015 Part 2: Decimal floating-point arithmetic
- ISO/IEC TS 18661-3:2015 Part 3: Interchange and extended types
- ISO/IEC TS 18661-4:2015 Part 4: Supplementary functions
- ISO/IEC TS 18661-5:2016 Part 5: Supplementary attributes
- ISO 18662 Traditional Chinese medicine – Vocabulary
- ISO 18662-1:2017 Part 1: Chinese Materia Medica
- ISO 18665:2015 Traditional Chinese medicine – Herbal decoction apparatus
- ISO 18666:2015 Traditional Chinese medicine – General requirements of moxibustion devices
- ISO 18682:2016 Intelligent transport systems – External hazard detection and notification systems – Basic requirements
- ISO 18739:2016 Dentistry – Vocabulary of process chain for CAD/CAM systems
- ISO 18743:2015 Microbiology of the food chain – Detection of Trichinella larvae in meat by artificial digestion method
- ISO 18744:2016 Microbiology of the food chain – Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits
- ISO/IEC 18745 Information technology – Test methods for machine readable travel documents (MRTD) and associated devices
- ISO/IEC 18745-1:2014 Part 1: Physical test methods for passport books (durability)
- ISO/IEC 18745-2:2016 Part 2: Test methods for the contactless interface
- ISO 18746:2016 Traditional Chinese medicine – Sterile intradermal acupuncture needles for single use
- ISO/TS 18750:2015 Intelligent transport systems – Cooperative systems – Definition of a global concept for Local Dynamic Maps
- ISO/PAS 18761:2013 Use and handling of medical devices covered by the scope of ISO/TC 84 – Risk assessment on mucocutaneous blood exposure
- ISO 18774:2015 Securities and related financial instruments – Financial Instrument Short Name (FISN)
- ISO 18775:2008 Veneers – Terms and definitions, determination of physical characteristics and tolerances
- ISO 18777:2005 Transportable liquid oxygen systems for medical use – Particular requirements
- ISO 18778:2005 Respiratory equipment – Infant monitors – Particular requirements
- ISO 18788:2015 Management system for private security operations – Requirements with guidance for use
- ISO/TS 18790 Health informatics – Profiling framework and classification for Traditional Medicine informatics standards development
- ISO/TS 18790-1:2015 Part 1: Traditional Chinese Medicine
- ISO/IEC 18809:2000 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-1 with MIC format
- ISO/IEC 18810:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-2 with MIC format
- ISO 18812:2003 Health informatics – Clinical analyser interfaces to laboratory information systems – Use profiles
- ISO/IEC TS 18822:2015 Programming languages – C++ – File System Technical Specification
- ISO/TS 18827:2017 Nanotechnologies – Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
- ISO 18829:2017 Document management – Assessing ECM/EDRM implementations – Trustworthiness
- ISO 18831:2016 Clothing – Digital fittings – Attributes of virtual garments
- ISO 18835:2015 Inhalational anaesthesia systems – Draw-over anaesthetic systems
- ISO/IEC 18836:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – MammothTape-2 format
- ISO 18841:2018 Interpreting services — General requirements and recommendations
- ISO/TR 18845:2017 Dentistry – Test methods for machining accuracy of computer-aided milling machines
- ISO/TS 18867:2015 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
- ISO 18875:2015 Coalbed methane exploration and development – Terms and definitions
- ISO/TS 18876 Industrial automation systems and integration – Integration of industrial data for exchange, access and sharing
- ISO/TS 18876-1:2003 Part 1: Architecture overview and description
- ISO/TS 18876-2:2003 Part 2: Integration and mapping methodology
- ISO 1887