Belt Tension Pulley
Best Seller
Manufacturer Part
Our Price $9.77 Compare At $11.53You Save $1.76 QuantityAdd to Cart
(151)
- MFG Number WPY54414
- In Stock
- Ships WednesdayGuaranteed
The Belt Tension Pulley is an OEM part for Whirlpool clothes dryers. It utilizes a tension mechanism to maintain precise alignment and contact between the drive belts and motor pulleys during operation.
Symptoms of a failed belt tension pulley include:
- Extended dry times or inability to dry clothes fully
- Abnormal noise or vibration coming from inside the dryer
- Premature belt wear requiring frequent replacement
- Error codes appearing or inability to start cycles
Causes of a bad pulley can include cracks, defects, or stiffness in the tension mechanism limiting its range of motion from years of operation. Lubricant breakdown within the pulley can also produce excessive friction or noise over time.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
- Will not tumble
- Noisy
See more...
Do-It-Yourself Stories from Customers like You Dryer model Maytag SDG515DAWW squeakingPeter S. • Brick, NJ • December 28, 2019
I've had this dryer apart a few times over the years, always got my parts here. Squeaks and igniter if memory serves.I ordered the two drum rollers that have a bearing in the center..they sit on metal shafts and freeroll. I ordered two..only one was bad but I needed the dryer up in one day, no time to disassemble and decide what to order then wait for parts. Tip: if you order the rollers, there are little washers (nylon?) between the roller and the c clips..don't lose them..they are hard to... Read more
Thrust Washer
Best Seller
Manufacturer Part
Our Price $7.96 Compare At $9.47You Save $1.51 QuantityAdd to Cart
(35)
- MFG Number WP233520
- In Stock
- Ships WednesdayGuaranteed
The Thrust Washer is an OEM part for Whirlpool washers and dryers, reduces friction between moving parts within the appliance. This small component is placed between rotating surfaces to ensure smooth operation and to extend the lifespan of those parts. The thrust washer can wear down or become damaged due to the constant pressure and movement.
Causes for replacement may include normal wear and tear, overloading the appliance, which puts extra stress on mechanical components, or a lack of regular maintenance.
Symptoms of a bad Thrust Washer include:
- Increased noise during operation
- The appliance vibrating more than usual
- A decrease in performance efficiency
This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
- Will not agitate
- Pumps but will not spin
- Will not tumble
See more...
Do-It-Yourself Stories from Customers like You The issue was a 10+year old Maytag washer wouldn't spin nor would the agitator move but the motor would run.Wessley R. • Trinity, AL • July 28, 2020
Upon removal of the lower inspection panel on the front of the machine, my 20 year old son thought the motor was bad by the smell. But he did discover what turned out to be the belt tensioner pulley laying inside the machine. After he pronounced it dead, without a thought to the idler pulley, I looked at the machine and determined the lack of movement was due to the idler pulley having "fallen" off the shaft by looking at the illustrated parts break down provided on this website.Ordered the... Read more
Door Catch Kit
Best Seller
Manufacturer Part
Our Price $15.52 Compare At $18.47You Save $2.95 QuantityAdd to Cart
(21)
- MFG Number LA-1003
- In Stock
- Ships WednesdayGuaranteed
The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.
Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.
Symptoms of a bad door catch include:
- The dryer door not staying closed
- Difficulty latching the door shut
- The dryer stopping mid-cycle due to the door opening
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
- Door won't close
- Shuts off too soon
- Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Door clip to my dryer brokeRichard D. • North Dinwiddie, VA • March 15, 2014
Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done.Total time was less than 10 minutes. Works like new. Read more
Retaining Ring
Best Seller
Manufacturer Part
Our Price $6.65 Compare At $7.98You Save $1.33 QuantityAdd to Cart
(29)
- MFG Number WP23748
- In Stock
- Ships WednesdayGuaranteed
The Retaining Ring is an OEM replacement part for Whirlpool dryers and washing machines. This retaining ring holds the rear wheels on the axels of the washer or dryer.
Symptoms of a bad retaining ring can include wear and tear over time, damage due to accident or impact, or corrosion affecting the structural integrity.
Causes of a bad retaining ring dryer include:
- Excessive vibration or movement of the drum during operation
- Noise or banging sounds from loose components
- Deformation or cracking of the retaining ring itself
- The dryer door not closing properly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
- Will not tumble
- Will not agitate
- Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You The issue was a 10+year old Maytag washer wouldn't spin nor would the agitator move but the motor would run.Wessley R. • Trinity, AL • July 28, 2020
Upon removal of the lower inspection panel on the front of the machine, my 20 year old son thought the motor was bad by the smell. But he did discover what turned out to be the belt tensioner pulley laying inside the machine. After he pronounced it dead, without a thought to the idler pulley, I looked at the machine and determined the lack of movement was due to the idler pulley having "fallen" off the shaft by looking at the illustrated parts break down provided on this website.Ordered the... Read more
Screw
Best Seller
Manufacturer Part
Our Price $4.34 Compare At $5.16You Save $0.82 QuantityAdd to Cart
(7)
- MFG Number WP90767
- In Stock
- Ships WednesdayGuaranteed
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You Certain buttons were'not workingBrent T. • Easton, MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
Screw
Best Seller
Manufacturer Part
Our Price $4.34 Compare At $5.16You Save $0.82 QuantityAdd to Cart
(2)
- MFG Number WP3390631
- In Stock
- Ships WednesdayGuaranteed
10 - 16 x 1/2
Do-It-Yourself Stories from Customers like You Agitator wasnt sloshingPaige B. • Clarksville, TN • January 30, 2015
I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more
Rubber Foot
Best Seller
Manufacturer Part
Our Price $4.34 Compare At $5.12You Save $0.78 QuantityAdd to Cart
(1)
- MFG Number WPY314137
- In Stock
- Ships WednesdayGuaranteed
Washer leveling rubber foot that attaches to the bottom of the leveling leg. For the leveling leg order W10176519.
Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniterSteven B. • Grantsville, WV • April 26, 2016
Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more
Motor Clamp
Manufacturer Part
Our Price $10.37 Compare At $12.44You Save $2.07 QuantityAdd to Cart
(7)
- MFG Number WP660658
- In Stock
- Ships WednesdayGuaranteed
This part is a motor clamp. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or broken motor clamp on certain makes of indoor appliance models. Motor clamps are essential for properly securing the drive motor on various types of indoor appliances such as washers, dryers, and refrigerators. Without the use of a motor clamp, the drive motor is free to move around or become detached. This can easily cause serious damage to the equipment and prevent proper functionality. Proper tools are needed to replace this part and appropriate safety measures should be adhered to when working on any type of equipment. For accurate information on how and where to install this replacement motor clamp, specific manufacturer diagrams should be referred to.As an authentic replacement part, this motor clamp can be used on multiple different models of washers, dryers, refrigerators, and washer/dryer combos manufactured by Kenmore, Maytag, Whirlpool, and Amana. Please note that this motor clamp is a genuine part made of high-quality materials and is sold individually.
This part fixes the following symptoms
- Noisy
See more...
Do-It-Yourself Stories from Customers like You Motor locked up and was buried in lint due to the felt seal failing and letting lint into the motor area.Steven O. • Shrewsbury, MA • February 06, 2022
Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents. Read more
Screw
Manufacturer Part
Our Price $4.34 Compare At $5.12You Save $0.78 QuantityAdd to Cart
(1)
- MFG Number WP489464
- In Stock
- Ships WednesdayGuaranteed
This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.
Do-It-Yourself Stories from Customers like You Cover unit in back of refrigerator need to be replacedLawrence T. • Catalina, AZ • March 20, 2016
VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT. Read more
Hex Nut
Manufacturer Part
Our Price $9.57 Compare At $11.39You Save $1.82 QuantityAdd to Cart
(3)
- MFG Number WP488130
- In Stock
- Ships WednesdayGuaranteed
This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.
Do-It-Yourself Stories from Customers like You Oven drawer roller hardware was missingVirginia R. • Woodinville, WA • April 11, 2017
Ordered the roller and nut, reattached the nylon wheel that I found in the floor under the oven.This was the only website where I could find all of the parts detailed and so I knew exactly what to buy. Even the manufacturer's website didn't have this info. Read more
- 1
- 2
- 3
- …
- 22
